Commit Graph

2830 Commits (b773a9049c7937327da174ee822318d69bbe4547)

Author SHA1 Message Date
Aaron Bach b773a9049c Updated simplisafe-python to 3.1.13 (#17696) 2018-10-22 22:49:12 +02:00
Daniel Høyer Iversen 61a96aecc0 Mill, support more heater types (#17676)
* mill, suport more heater types

* mill requirements
2018-10-22 19:32:19 +02:00
Matt Snyder 0524c51c1a Update flux library version (#17677) 2018-10-22 07:04:47 +02:00
Paulus Schoutsen 8f529b20d7 Bump frontend to 20181021.0 2018-10-21 20:34:12 +02:00
Luke Fritz 95371fe4a6 Bump pyarlo==0.2.2 (#17673)
* Bump pyarlo to 0.2.2, fixes #17427

* Increase log level for refresh message to clear up logs
2018-10-21 19:54:51 +02:00
Mathieu Velten 2d980f2a92 Update pynetgear to 0.5.0 (#17652) 2018-10-21 19:54:01 +02:00
Fabian Affolter 731753b604 Upgrade holidays to 0.9.8 (#17656) 2018-10-21 15:07:44 +02:00
Fabian Affolter cf24687024 Upgrade async_timeout to 3.0.1 (#17655) 2018-10-21 14:13:30 +02:00
guillaume1410 c03b137130 Removing ryobi gdo (#17637) 2018-10-21 08:08:35 +02:00
Raymon de Looff 85dbf1eed3 Upgrade dsmr_parser to 0.12 (#17634) 2018-10-20 22:07:47 +02:00
Julien Debaru e980d1b9fe Fix linky sensor login error (#17110)
* Fix linky sensor login error

* Make platform fail-safe

Adding following enhancements:
* Make sure the platform loads correctly by making the first API request in setup_platform.
* Close the session after each API call.
* Use timeout parameter everywhere.

* Fix Hound CI error: line too long.

* Update pylinky library

* Remove LinkyClient from update()
2018-10-20 15:30:10 +02:00
Nick Touran e343f5521c Upgrade gstreamer-player to 1.1.2 (#17568)
* Upgrade gstreamer-player to 1.1.2

* Updated requirements for gstreamer-player properly.
2018-10-19 18:11:47 +02:00
Steven Looman f7bc44955c Upgrade async_upnp_client to 0.12.7 (#17601) 2018-10-19 18:10:04 +02:00
Nick Horvath df2c3cdded Bump thermoworks version to fix conflict from upstream pyrebase sseclient (#17620) 2018-10-19 17:48:46 +02:00
mvn23 7baffed7b7 Add sensor support to opentherm_gw (#17314)
* Add OpenTherm Gateway sensor platform.

* Add OTGW_ variables to list of supported sensors.

* Order imports.

* Add OpenTherm Gateway binary sensor support.

* Revert "Add OpenTherm Gateway binary sensor support."

This reverts commit 115acaa912.

* Import COMP_SENSOR from sensor component rather than defining it.

* Update opentherm_gw sensor platform docs url.

* Update dependency to v0.2b1
Old version had incorrect variable names for some of the sensors

* Update requirements_all.txt

* Address review findings.

* Update .coveragerc
2018-10-19 07:31:19 +02:00
Kevin Fronczak 222ba96b3e Bump blinkpy version to 0.10.1 (#17595) 2018-10-18 21:30:46 +02:00
Paulus Schoutsen 20bd14defb Bump frontend to 20181018.0 2018-10-18 13:52:38 +02:00
Paulus Schoutsen 20fa6c5383
Update snapcast to 2.0.9 (#17573) 2018-10-18 11:06:32 +02:00
Matthew Garrett e2a1e21c8d Add support for LG soundbars (#17570)
* Add LG soundbar support

We can autodiscover these, so for now let's skip any local configuration.
Currently we expose volume, source and equaliser preset - we can expose the
other volume controls and options as well if necessary, but I don't know
whether it's worth it.

* Add discovery of LG devices

This is a generic discovery type that doesn't obviously contain enough
information to identify whether we're talking to a speaker system or any
other kind of device - on the other hand I haven't been able to find any
other LG devices that respond like this, so we can cross that bridge when
we get to it.

* Lint
2018-10-18 10:39:33 +02:00
Brian Gianforcaro 45878c6df0 Upgrade twilio package to version 6.19.1 (#17395) (#17424)
- Bump twilio requirement to latest 6.19.1 version

- The generic response type is gone in the latest
  versions of the twilio package. It appears we were
  generating an empty response just to get the empty
  xml body. TwilML is the new base class all responses
  inherit from. So I've switched the code over to using
  and empty TwilML object instead.

- The exception type was moved to a different location.
2018-10-18 09:17:55 +02:00
Eduard van Valkenburg 50a66abd80 Updated package to fix #16960 (#17555) 2018-10-17 22:56:54 +02:00
Steven Looman 7106d9e9d4 Upgrade async_upnp_client to 0.12.6 (#17560) 2018-10-17 22:56:21 +02:00
Bram Kragten 33860bf23c Adding id to lovelace cards in ui-lovelace.yaml (#17498)
* ID is added to cards without ID in ui-lovelace.yaml when loaded

* Hound

* Remove ui-lovelace.yaml

* Nicer get

* Update tests

* If YAML dump fails, config not gone

* Add tests

* Woof!

* Remove nosetests

* Address comments

* Woof...

* Delete test.yaml

* update rights to saved file

* fix

* line break
2018-10-17 16:31:06 +02:00
Paulus Schoutsen 95c43d634b Bump frontend to 20181017.0 2018-10-17 14:16:49 +02:00
Anders Melchiorsen 1e4463957d Scan all network interfaces for LIFX bulbs (#17530) 2018-10-17 10:50:13 +02:00
Kevin Fronczak 5088e7ee49 Blink update - fixes #17316 (#17538)
* Updgrae blinkpy to 0.10.0

- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number

* Update requirements
2018-10-17 08:38:03 +02:00
Nate Clark 11004bcf34 Manual IP & port configuration for Konnected devices (#17120)
* add capability for manually specifying IP and port of Konnected device(s)

* add config options for blink and discovery settings

* import konnected only in functions where needed

* updates from code review feedback

* convert manual_discovery to async

* code review updates; use correct sync vs async
2018-10-17 00:39:32 +02:00
Marcel Hoppe 6b3e4ca7bd update hangups to 0.4.6 and fix Issue #16593 hangouts reconnects. (#17518) 2018-10-16 20:09:34 +02:00
Daniel Høyer Iversen aa176312a5 Update switchmate library (#17519) 2018-10-16 20:08:34 +02:00
Daniel Høyer Iversen 6235aae196 Update mill library (#17520) 2018-10-16 20:08:04 +02:00
Tsvi Mostovicz c6d9ceca63 Bump hdate version to 0.6.5 (#17510)
* Bump hdate version to 0.6.4

* Bump to 0.6.5

* Change test so we check when passing tzinfo object
2018-10-16 13:45:39 +02:00
Robert Svensson a795093705 UniFi POE control (#17011)
* First commit

* Feature complete?

* Add dependency

* Move setting poe mode logic to library

* Use guard clauses

* Bump requirement to 2

* Simplify saving switches with poe off

* Store and use poe mode

* Fix indentation

* Fix flake8

* Configuration future proofing

* Bump dependency to v3

* Add first test

* Proper use of defaults with config flow (thanks helto)

* Appease hound

* Make sure there can't be duplicate entries of combination host+site

* More tests

* More tests

* 98% coverage of controller

* Fix hound comments

* Config flow step init not necessary

* Use async_current_entries to check if host and site for controller is used

* Remove storing/restoring poe off devices to slim PR

* First batch of switch tests

* More switch tests.

* Small improvements and clean up

* Make tests pass
Don't name device in device registry

* Dont process clients that belong to non-UniFi POE switches

* Allow selection of site from a list in config flow

* Fix double blank lines in method

* Update codeowners
2018-10-16 10:35:35 +02:00
Aaron Bach a9389d2d43
Bumps simplisafe-python to 3.1.12 (#17509)
* Bumps simplisafe-python to 3.1.12

* Updated requirements
2018-10-15 22:54:32 -06:00
Alexander Lyon 993a02b8c4 Fix the sabnzbd component api error (#17014)
* Bump pysabnzbd version number

* Pass hass aiohttp session to pysabnzbd
2018-10-16 00:18:59 +02:00
Daniel Perna 73197c9a6c
Update pyhomematic to 0.1.51 (#17491) 2018-10-15 21:15:26 +02:00
Craig J. Midwinter 3edcc9420a Update pysher version (#17455) 2018-10-14 23:51:15 +02:00
Aaron Bach b022dde622
Bumped simplisafe-python to 3.1.11 (#17454)
* Bumped simplisafe-python to 3.1.10

* Updated requirements

* Updated requirements
2018-10-14 14:26:44 -06:00
Daniel Høyer Iversen a401be9b1b
New climate device (#17313)
* initial version of millheater

* Remove unused imports

* Add some comments

* separate lib

* fix review comments
2018-10-14 20:22:20 +02:00
Paulus Schoutsen ed683d8c2c Update frontend to 20181014.0 2018-10-14 19:17:30 +02:00
Fabian Affolter d4061b73b0 Upgrade youtube_dl to 2018.10.05 (#17429) 2018-10-14 17:14:06 +02:00
Fabian Affolter 9305ea9a6b Upgrade numpy to 1.15.2 (#17431) 2018-10-14 17:13:25 +02:00
Fabian Affolter 5ac0469ef9 Upgrade python-telegram-bot to 11.1.0 (#17441) 2018-10-14 17:08:17 +02:00
Malte Franken fccaf7f919 NSW Rural Fire Service platform (#16802)
* initial integration with nsw rural fire service feed

* improved test coverage

* updated requirements

* grouped imports

* removed debug print statement

* moved manager's startup code into separate call

* simplified feed update code

* simplified feed update code

* simplified device state attribute code

* added source to conform with pr #17339

* fixed lint

* refactored how entities are managed

* fixed pylint

* simplified signalling
2018-10-14 14:11:25 +02:00
Brant Knudson f198859441 Upgrade pyvera to 0.2.45 (#17419)
This release adds support for garage door openers. A garage door
opener will show up as a switch.
2018-10-14 09:26:34 +02:00
333ryan18 a302112879 Bump Totalconnect (#17418)
* Update totalconnect.py

* Update requirements_all.txt
2018-10-14 09:25:24 +02:00
William Scanlon 6a8eb8d0a1 Moved econet from climate to water heater (#17322)
* Moved econet from climate to water heater

* Updated .coveragerc

* Fixed requirements_all.txt
2018-10-13 23:16:44 +02:00
J4nsen d0da265166 Fix netio component (#17411)
* bump pynetio to 0.1.9.1 to actually use provided credentials.

* cast to int to fix TypeError

* update requirements_all.txt
2018-10-13 21:09:10 +02:00
Keiran S 78e29cd3fa Add AWS Route53 Dynamic DNS support (#17072)
* Add AWS Route53 dynamic DNS support to Home Assistant

* Remove line breaks
2018-10-13 21:03:30 +02:00
Steven Looman e6d002c377 Update to async-upnp-client==0.12.5 (#17401) 2018-10-13 14:29:12 +02:00
Florian Klien d4b092706a XMPP async (#17283)
* new lib dependencies, working old xmpp

* non working aioxmpp

* reverting to sync xmpp

will try slixmpp instead of aioxmpp

reasons:
echo bot example of aioxmpp had blocking behavior (slixmpp echo bot works fine)
closer API to sleekxmpp
less dependencies than aioxmpp

* first working slixmpp version

* DEBUG messages, changed MUC call

the joinMUC method changed from sleekxmpp to slixmpp
added debug messages
better name for cleanup callback

* flake8

* little cleanup, tested MUC

* requirements_all

* dependencies managed by slixmpp, removed debug messages

* resource configurable by user, requirements updated

* changed __init__ parameter code format

* removed trailing dots from LOG messages

* changed super call to python3 format
2018-10-13 10:37:42 +02:00