* Allow /api/ and /api/config to be accessed without auth. If config is accessed without auth, only show minimal information. Also improves comments
* Re-enable auth on /api/ since a lot of tests get broken if it does not require auth
* Move the discovery info from /api/config to /api/discovery_info
* Flake8 fixes
"unix" timestamp is number of seconds since Jan 1, 1970 UTC.
This allows scripts that use templates to generate time
deltas in seconds if desired from state attributes such
as last_updated.
Some examples:
timestamp now is
{{ as_timestamp(now) }}
timstamp of last change is
{{ as_timestamp(states.binary_sensor.garage_door.last_changed) }}
seconds since last change is
{{ as_timestamp(now) - as_timestamp(states.binary_sensor.garage_door.last_changed) }}
* process only last 20 available entries to avoid bombing event
bus when parsing huge feeds
* trigger first update only when HA has completed startup,
allowing components to complete subscriptions to feedreader
events
* quote url in logs for better readability
* Made changes so that the mqtt configuration can accept client keys and certs for auth.
* Need to figure out how the broker_config works, it's failing tests
* Fixed it so all tests passed and ssl feature works for all brokers
which are't embedded
* Bring into line with pep8
* Added config validation which has allowed me to make the code simpler
* Add MySensorsDeviceEntity class to hold the common attributes,
properties and methods for mysensors entities.
* Inherit from MySensorsDeviceEntity class in binary_sensor, light,
sensor and switch mysensors platforms.
* Remove not needed attribute and method for const in GatewayWrapper
class. The const attribute is already set in the wrapped object.
* Clean up state property for mysensors sensor entities.
* Inherit from MySensorsLightRGB in MySensorsLightRGBW class.
* Remove use of get_component in mysensors component and platforms.
* Clean up update method in MySensorsDeviceEntity class.
* bugfix: ignore not existing property in feedreader item
* add info and debug data
* split logic in smaller and hopefully easier to understand functions
Fix test to prevent early exit of mqtt init handler when
both embedded and broker configs are present.
Signed-off-by: Gwendal Grignou <gwendal@gmail.com>
Change the zwave config default path to be valid in all but rare
edge cases. This will let that config value be truely optional.
Also check that libopenzwave is installed and print a warrning if
it cannot be found pointing at the site.
* initial support for generic 433mhz gpio adapters
* rpi-rf: refactor id_on/id_off to code_on/code_off
fits the purpose better and improves understanding
* rpi-rf: use v0.9.4
* rpi-rf: update features and dependencies to v0.9.5
includes the ability to optionally specify a protocol for each switch
* rpi-rf: remove explicit RPi.GPIO dependency
already a dependency of the rpi-rf module
* rpi-rf: make setting gpio, code_on and code_off mandatory
* rpi-rf: remove unused value_template
* rpi-rf: only enable TX once if there are switches
Prevented a switch from being turned on twice.
Made the module regex more robust.
Refactored the code to reduce the amount of network traffic to/from pulseaudio.
Fixed pylint issues
* Bump version of pymysensors to 0.6, which includes the tcp gateway.
* Update requirements_all.txt.
* Replace CONF_PORT with CONF_DEVICE and ATTR_PORT with ATTR_DEVICE.
* Add tcp_port in config.
* Try to guess if tcp or serial gateway is configured, by validating
device name as an ip address. If successful setup tcp gateway, if it
fails, setup serial gateway.
* Update device_state_attributes to show correct device, ethernet or
serial.
* set name to hyperion assets
by specifying the name in the configuration:
light kodi_xxx:
name: "Kodi XXX"
platform: hyperion
host: 192.168.1.222
port: 19444
* Update hyperion.py
fix extra space
This tracker discovers new devices on boot and tracks bluetooth devices
periodically based on interval_seconds value. Devices discovered are
stored with 'BT_' as the prefix for device mac.
Requires PyBluez
* Initial Support for EQ3 Bluetooth Smart Radiator Thermostats
* tox runs successfully
* Moved device specific stuff to bluepy_devices library
* lint fix
Some Sonos devices (e.g SUB) does not have
a upnp media renderer, but are discovered as sonos
devices. Creating a SonosDevice object from such a
device will fail.
When a sonos player goes offline an endless stream of
exceptions is raised. That happens because homeassistant keeps trying
to refresh its status.
This can happen even when a sonos player has gone offline **before**
homeassistant is started. The sonos players take some time before
realizing one of their mates is no longer online, leading to the same
stream of exceptions inside of homeassistant.
Three types of exceptions of can be raised:
- `requests.packages.urllib3.exceptions.MaxRetryError`
- `requests.packages.urllib3.exceptions.NewConnectionError`
- `TimeoutError`
It's not possible to handle all of them with a single `except` block
because they are raised in a random order and after some delays. That
means a 2nd or 3rd exception can take place while handling the 1st one.
The only solution is to check whether a a player is actually reachable
by attempting to connect to a service that must be running on it.
Also all the players in a 'unknown' state should not be polled by
homeassistant (despite of their brand).
I'm going to upstream the `_is_reachable` method I added to the
`sonos.py` file into `SoCo`. In the meantime we must ship this piece
of code with homeassistant.
Signed-off-by: Flavio Castelli <fcastelli@suse.com>
* SCSGATE: Actually cycle through all devices to register
Modify _activate_next_device function to actually cycle through self-devices_to_register instead of simply checking whether there are any and onl registering one
* Deleted extra white lines
* Add STATE_UNAVAILABLE to states that are ignored when writing to the
database. This will avoid a field type error for string if the field
already contains a different type, eg integer.
* Add test for ignored states for influxdb.
* Clean up influxdb tests.
CONF_PURGE_DAYS so it can be changed easier later.
Use 'recorder' domain instead of 'history' domain.
Pass purge_days config directly into Recorder object instead of passing
the config object around.
Issue https://github.com/balloob/home-assistant/issues/1337
When purge_days is set under the history component, recorder.py will
delete all events and states that are older than purge_days days ago.
Currently, this is only done once at start up. A vacuum command is
also run to free up the disk space sqlite would still use after deleting
records.
Change the sensor name schema so nodes are not mixed up. The dot that was pressent before was ignored by home-assistant.
Before name: <skeatchname> <node_id><child_id> eg. wall 107
New name : <skeatchname> <node_id> <child_id> eg. wall 10 7
This will result in a Home Assistant Entity ID of: sensor.wall_10_7
When picking which of the high/low temperatures to display as the
"target", it makes more sense to take the outside temperature into
consideration, rather than the current temperature of the thermostat.
If the temperature outside is less than the temperature of the
thermostat, then we are far more likely to end up in "heating" mode
eventually, and vice versa, regardless of where the current inside
temp falls in the range between high and low.
The setup_platform function is trying to get CONF_LATITUDE and CONF_LONGITUDE,
but the validation schema was not accepting these.
Also moved CONF_MONITORED_CONDITIONS and CONF_ELEVATION to homeassistant.const
because they are used in other places.
* Do not propagate API password in service requests.
It makes service validation fail. The choice is to either handle it as an
optional key in every service handler and make sure it doesn't end up in event
stream and notifications, or to strip it as early as possible.
* Some places still need a forwarded api password.
- Event forwarding/remote api uses the local api password to
authenticate against the remote instance.
- The generated index.html at '/' embeds the api password.
* Do not propagate API password in service requests.
It makes service validation fail. The choice is to either handle it as an
optional key in every service handler and make sure it doesn't end up in event
stream and notifications, or to strip it as early as possible.
* Some places still need a forwarded api password.
- Event forwarding/remote api uses the local api password to
authenticate against the remote instance.
- The generated index.html at '/' embeds the api password.
In order to prevent a potential timing attack, it's important to make
sure the password check takes the same amount of time, regardless of
how many characters in the candidate password match the real password.
This commit does increase the verbosity of the authentication check.
Generally it is a good idea for authentication logic to be very clear,
even if that requires some extra verbosity.
* Expanded homematic component with MAX! support via homegear
Also multithreading fixes
* fixed tox errors
* incorporate changes suggested by balloob
* replaced HomematicConfig Container Class with namedtuple
* fixed lint errors
Since all values coming out of the Thermostat component pass though the
_convert_for_display() method (which handles any necessary rounding),
there is no need to round values that only exist in the internal state
of the thermostat device. It serves no purpose and risks rounding
errors/precision loss.
Instead of nested tracebacks, show a simpler error message.
Config directory: /home/user/.homeassistant
ERROR:homeassistant.util.yaml:duplicate key: "script"
in "/home/user/.homeassistant/configuration.yaml", line 95, column 0
in "/home/user/.homeassistant/configuration.yaml", line 108, column 0
Instead of nested tracebacks, show a simpler error message.
Config directory: /home/user/.homeassistant
ERROR:homeassistant.util.yaml:duplicate key: "script"
in "/home/user/.homeassistant/configuration.yaml", line 95, column 0
in "/home/user/.homeassistant/configuration.yaml", line 108, column 0
* We need to allow extra keys on top level componenet config
fixes#1756
* Add comment about location of hass (fixes#1723)
* Fix for MQTT config validation on the protocol field. (#1765)
* Update frontend with weblink fix
* Fix for light service validation. (#1770)
Incorrect validation tested if passed value was a list instead of
a member of the list.
* Accept group without entities in configuration. (#1768)
* Accept group without entities in configuration.
People seem to use these as placeholders for future expansion of their
home automation dreams, and we used to accept them. We still have to
specify at least one of 'name', 'view' or 'icon' so that the group is
parsed as a dictionary.
* Also accept empty entities: key in a group.
* Additional fix for empty entities value in a group config.
* Version bump to 0.17.1
* Accept group without entities in configuration.
People seem to use these as placeholders for future expansion of their
home automation dreams, and we used to accept them. We still have to
specify at least one of 'name', 'view' or 'icon' so that the group is
parsed as a dictionary.
* Also accept empty entities: key in a group.
* Additional fix for empty entities value in a group config.
Two tests were invariably grinding my system to a halt as it was
applying migrations to an empty sqlite database. This patch reduces
the time of a pytest run from 50 to about 16 seconds on my desktop.
The difference is even more noticable on a slower laptop drive, but
is probably insignificant for all you fancy SSD users.
Accept delay configuration even when someone forgets to indent the time
specification.
Also removed 'weeks' and 'microseconds' from acceptable delay values.
There is a new homeassistant release every 2 weeks and running scripts
are not persisting across restarts. And there is still the option of
using (weeks*7) days if the long delay is really necessary.
And if someone really depends on microsecond delay precision we are
unlikely to be able to provide this accuracy, even milliseconds is
suspect for that matter but will at least allow us to specify some
subsecond delay.
vol.IsFile results in an instance of the IsFile method being returned by
the schema validation process. It needs to be called in order to do the
right thing.
Fabian Affolter
Robbie Trencheny
Philip Lundrigan
jazzaj
Paulus Schoutsen
John Arild Berentsen
Daniel Høyer Iversen
Nolan Gilley
Charles Spirakis
William Scanlon
Ellis Percival
Kyle Hendricks
Hernán
Fabian Affolter
Kyle Hendricks
Per Sandström
devdelay
Brent
Alexander Fortin
deisi
Andrew LeCody
Tim Harton
Martin Hjelmare
Erik Eriksson
gwendalg
Dennis Karpienski
Brad Johnson
blackdog70
happyleavesaoc
Dan
Micha LaQua
Dan Cinnamon
Daniel
Bart274
Jeff Schroeder
Igor Shults
sander76
Christoph Wagner
Jon Evans
Chema García
Manoj
Markus Peter
Greg Dowling
Jan Harkes
Jan-Preben Mossin
Flavio Castelli
pavoni
icovada
Justyn Shull
Alex Harvey
Øystein Hansen
Josh Wright
Joel Asher Friedman
OpenDave15