* Remove myself as maintainer of the Rejseplanen integration
Unfortunately I don't have the time or energy to maintain the integration.
I have made a post on the Danish HA Facebook group, encouraging someone to take over. https://www.facebook.com/groups/209025039666209/posts/1515990205636346/
* Update CODEOWNERS
* rebase off dev
* Update homeassistant/components/weatherflow_cloud/const.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Addressing 1st round of PR Comments
* Update homeassistant/components/weatherflow_cloud/config_flow.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* addressing PR Comments
* fixing last comment that i can see
* Update homeassistant/components/weatherflow_cloud/coordinator.py
OOPS
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/weatherflow_cloud/weather.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/weatherflow_cloud/coordinator.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* switching to station id
* Update homeassistant/components/weatherflow_cloud/strings.json
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* addressing PR
* Updated tests to be better
* Updated tests accordingly
* REAuth flow and tests added
* Update homeassistant/components/weatherflow_cloud/strings.json
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/weatherflow_cloud/coordinator.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Addressing PR comments
* Apply suggestions from code review
* ruff fix
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add support to lutron lights for color and temperature control
* Fix review comments for adding color and temperature to Lutron lights
* Add eclair4151 as codeowner Lutron Caseta Integration
* Fix review comments for add color support for Lutron lights
* Code cleanup suggestions from PR review for adding color support for Lutron Lights
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix minor syntax errors from review comments for lutron light color support
* Fix review comments and code cleanup for Lutron light color support
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Robert Resch <robert@resch.dev>
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* add bring integration
* fix typings and remove from strictly typed
- wait for python-bring-api to be ready for strictly typed
* make entity unique to user and list
- before it was only list, therefore the same list imported by two users would have failed
* simplify bring attribute
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* cleanup and code simplification
* remove empty fields in manifest
* __init__.py aktualisieren
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* __init__.py aktualisieren
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* strings.json aktualisieren
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* streamline async calls
* use coordinator refresh
* fix order in update call and simplify bring list
* simplify the config_flow
* Update homeassistant/components/bring/manifest.json
Co-authored-by: Sid <27780930+autinerd@users.noreply.github.com>
* add unit testing for __init__.py
* cleanup comments
* use dict instead of list
* Update homeassistant/components/bring/todo.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* clean up
* update attribute name
* update more attribute name
* improve unit tests
- remove patch and use mock in conftest
* clean up tests even more
* more unit test inprovements
* remove optional type
* minor unit test cleanup
* Update .coveragerc
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
Co-authored-by: Sid <27780930+autinerd@users.noreply.github.com>
* init support for config flow for lupusec
* correctly iterate over BinarySensorDeviceClass values for device class
* bump lupupy to 0.3.2
* Updated device info for lupusec
* revert bump lupupy for separate pr
* fixed lupusec test-cases
* Change setup to async_setup
* remove redundant check for hass.data.setdefault
* init support for config flow for lupusec
* correctly iterate over BinarySensorDeviceClass values for device class
* bump lupupy to 0.3.2
* Updated device info for lupusec
* revert bump lupupy for separate pr
* fixed lupusec test-cases
* Change setup to async_setup
* remove redundant check for hass.data.setdefault
* resolve merge error lupupy
* connection check when setting up config entry
* removed unique_id and device_info for separate pr
* changed name to friendly name
* renamed LUPUSEC_PLATFORMS to PLATFORMS
* preparation for code review
* necessary changes for pr
* changed config access
* duplicate entry check
* types added for setup_entry and test_host_connection
* removed name for lupusec system
* removed config entry from LupusecDevice
* fixes for sensors
* added else block for try
* added integration warning
* pass config to config_flow
* fix test cases for new config flow
* added error strings
* changed async_create_entry invocation
* added tests for exception handling
* use parametrize
* use parametrize for tests
* recover test
* test unique id
* import from yaml tests
* import error test cases
* Update tests/components/lupusec/test_config_flow.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* fixed test case
* removed superfluous test cases
* self._async_abort_entries_match added
* lib patching call
* _async_abort_entries_match
* patch lupupy lib instead of test connection
* removed statements
* test_flow_source_import_already_configured
* Update homeassistant/components/lupusec/config_flow.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* removed unique_id from mockentry
* added __init__.py to .coveragerc
---------
Co-authored-by: suaveolent <suaveolent@users.noreply.github.com>
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Add Huum integration
* Use DeviceInfo instead of name property for huum climate
* Simplify entry setup for huum climate entry
* Don’t take status as attribute for huum climate init
* Remove unused import
* Set unique id as entity id in huum init
* Remove unused import for huum climate
* Use entry ID as unique ID for device entity
* Remove extra newline in huum climate
* Upgrade pyhuum to 0.7.4
This version no longer users Pydantic
* Parameterize error huum tests
* Update all requirements after pyhuum upgrade
* Use Huum specific naming for ConfigFlow
* Use constants for username and password in huum config flow
* Use constants for temperature units
* Fix typing and pylint issues
* Update pyhuum to 0.7.5
* Use correct enums for data entry flow in Huum tests
* Remove test for non-thrown CannotConnect in huum flow tests
* Refactor failure config test to also test a successful flow after failure
* Fix ruff-format issues
* Move _status outside of __init__ and type it
* Type temperature argument for _turn_on in huum climate
* Use constants for auth in huum config flow test
* Refactor validate_into into a inline call in huum config flow
* Refactor current and target temperature to be able to return None values
* Remove unused huum exceptions
* Flip if-statment in async_step_user flow setup to simplify code
* Change current and target temperature to be more future proof
* Log exception instead of error
* Use custom pyhuum exceptions
* Add checks for duplicate entries
* Use min temp if no target temp has been fetched yet when heating huum
* Fix tests so that mock config entry also include username and password
* Fix ruff styling issues
I don’t know why it keeps doing this. I run `ruff` locally, and then it does not complain, but CI must be doing something else here.
* Remove unneded setting of unique id
* Update requirements
* Refactor temperature setting to support settings target temparature properly
* Add bangolufsen integration
* add untested files to .coveragerc
* Simplify integration to media_player platform
* Remove missing files from .coveragerc
* Add beolink_set_relative_volume custom service
Tweaks
* Remove custom services
Remove grouping as it was dependent on custom services
* Update API to 3.2.1.150.0
Reduce and optimize code with feedback from joostlek
Tweaks
* Updated testing
* Remove unused options schema
* Fix bugfix setting wrong state
* Fix wrong initial state
* Bump API
* Fix Beosound Level not reconnecting properly
* Remove unused constant
* Fix wrong variable checked to determine source
* Update integration with feedback from emontnemery
* Update integration with feedback from emontnemery
* Remove unused code
* Move API client into dataclass
Fix not all config_flow exceptions caught
Tweaks
* Add Bang & Olufsen brand
* Revert "Add Bang & Olufsen brand"
This reverts commit 57b2722078.
* Remove volume options from setup
Simplify device checks
rename integration to bang_olufsen
update tests to pass
Update API
* Remove _device from base
Add _device to websocket
* Move SW version device update to websocket
Sort websocket variables
* Add WebSocket connection test
* Remove unused constants
* Remove confirmation form
Make discovered devices get added to Home Assistant immediately
Fix device not being available on mdns discovery
Change config flow aborts to forms with error
* Update tests for new config_flow
Add missing api_exception test
* Restrict manual and discovered IP addresses to IPv4
* Re-add confirmation step for zeroconf discovery
Improve error messages
Move exception mapping dict to module level
* Enable remote control WebSocket listener
* Update tests
* Mark home_plus_control a virtual integration using Netatmo
* Apply code review suggestion
Co-authored-by: Robert Resch <robert@resch.dev>
---------
Co-authored-by: Robert Resch <robert@resch.dev>
* Add authentication flows to tplink integration to enable newer device protocol support
* Add websession passing to tplink integration discover methods
* Use SmartDevice.connect()
* Update to use DeviceConfig
* Use credential hashes
* Bump python-kasa to 0.6.0.dev0
* Fix tests and address review comments
* Add autodetection for L530, P110, and L900
This adds mac address prefixes for the devices I have.
The wildcards are left quite lax assuming different series may share the same prefix.
* Bump tplink to 0.6.0.dev1
* Add config flow tests
* Use short_mac if alias is None and try legacy connect on discovery timeout
* Add config_flow tests
* Add init tests
* Migrate to aiohttp
* add some more ouis
* final
* ip change fix
* add fixmes
* fix O(n) searching
* fix O(n) searching
* move code that cannot fail outside of try block
* fix missing reauth_successful string
* add doc strings, cleanups
* error message by password
* dry
* adjust discovery timeout
* integration discovery already formats mac
* tweaks
* cleanups
* cleanups
* Update post review and fix broken tests
* Fix TODOs and FIXMEs in test_config_flow
* Add pragma no cover
* bump, apply suggestions
* remove no cover
* use iden check
* Apply suggestions from code review
* Fix branched test and update integration title
* legacy typing
* Update homeassistant/components/tplink/__init__.py
* lint
* Remove more unused consts
* Update test docstrings
* Add sdb9696 to tplink codeowners
* Update docstring on test for invalid DeviceConfig
* Update test stored credentials test
---------
Co-authored-by: Teemu Rytilahti <tpr@iki.fi>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Adding initial Epion Air integration logic
* Skipping sensors with missing data
* Patching Epion integration
* Adding additional Epion measurement types
* Cleaning up logging
* Cleaning up code
* Fixing error handling for invalid Epion keys
* Adding tests and improving error handling
* Patching Epion tests
* Cleaning up Epion integration code
* Bumping Epion package and including missing files
* Moving data updates to coordinator and addressing feedback
* Improve exception handling
* Exposing model name and firmware version
* Cleaning up code according to review
* Cleaning up code according to review
* Adding check to prevent duplicate account setup
* Refactoring tests and checking for duplicates
* Cleaning up test code according to review
* Cleaning up test code
* Removing entity name overrides
* Fix code format for tests
* Adding missing newlines in JSON files
* Fixing formatting
* Updating device method to always return a device
* Updating coordinator
* First checkin for myUplink
* Refactored coordinator and sensor state classe
* Updated .coveragerc
* Update test_config_flow
* Fix test_config_flow for myuplink
* Only set state class for temperature sensor
* PR comment updates
* Type strong dict
* use asyncio.timeouts
* PR updates (part 1)
* Updated to myuplink 0.0.9
* Add strict typing
* Fix typing
* Inherit CoordinatorEntity
* Clean up coordinator and sensors
* Use common base entity
* Improve device point sensor
* Exclude entity from coverage
* Set device point entity name if there's no entity description
* Update homeassistant/components/myuplink/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/myuplink/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/myuplink/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Remvoed firmware + connstate sensors
* Always add device point parameter name
* Removed MyUplinkDeviceSensor
* Removed unused class
* key="celsius",
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add new Rabbit Air integration
* Remove py.typed file
It is not needed and was just accidentally added to the commit.
* Enable strict type checking for rabbitair component
Keeping the code fully type hinted is a good idea.
* Add missing type annotations
* Remove translation file
* Prevent data to be added to hass.data if refresh fails
* Reload the config entry when the options change
* Add missing type parameters for generics
* Avoid using assert in production code
* Move zeroconf to optional dependencies
* Remove unnecessary logging
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Remove unused keys from the manifest
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Replace property with attr
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Allow to return None for power
The type of the is_on property now allows this.
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Remove unnecessary method call
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update the python library
The new version properly re-exports names from the package root.
* Remove options flow
Scan interval should not be part of integration configuration. This was
the only option, so the options flow can be fully removed.
* Replace properties with attrs
* Remove multiline ternary operator
* Use NamedTuple for hass.data
* Remove unused logger variable
* Move async_setup_entry up in the file
* Adjust debouncer settings to use request_refresh
* Prevent status updates during the cooldown period
* Move device polling code to the update coordinator
* Fix the problem with the switch jumping back and forth
The UI seems to have a timeout of 2 seconds somewhere, which is just a
little bit less than what we normally need to get an updated state. So
the power switch would jump to its previous state and then immediately
return to the new state.
* Update the python library
The new version fixes errors when multiple requests are executed
simultaneously.
* Fix incorrect check for pending call in debouncer
This caused the polling to stop.
* Fix tests
* Update .coveragerc to exclude new file.
* Remove test for Options Flow.
* Update the existing entry when device access details change
* Add Zeroconf discovery step
* Fix tests
The ZeroconfServiceInfo constructor now requires one more argument.
* Fix typing for CoordinatorEntity
* Fix signature of async_turn_on
* Fix depreciation warnings
* Fix manifest formatting
* Fix warning about debouncer typing
relates to 5ae5ae5392
* Wait for config entry platform forwards
* Apply some of the suggested changes
* Do not put the MAC address in the title. Use a fixed title instead.
* Do not format the MAC to use as a unique ID.
* Do not catch exceptions in _async_update_data().
* Remove unused _entry field in the base entity class.
* Use the standard attribute self._attr_is_on to keep the power state.
* Store the MAC in the config entry data
* Change the order of except clauses
OSError is an ancestor class of TimeoutError, so TimeoutError should be
handled first
* Fix depreciation warnings
* Fix tests
The ZeroconfServiceInfo constructor arguments have changed.
* Fix DeviceInfo import
* Rename the method to make it clearer what it does
* Apply suggestions from code review
* Fix tests
* Change speed/mode logic to use is_on from the base class
* A zero value is more appropriate than None
since None means "unknown", but we actually know that the speed is zero
when the power is off.
---------
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Martin Eberhardt
Daniel Shokouhi
Andy
Michał Jaworski
Jeef
Tomer Shemesh
Erik Montnemery
Sid
Jeremy TRUFIER
Åke Strandberg
Andriy Kushnir
Marco Lettieri
Jevgeni Kiski
Matthew FitzGerald-Chamberlain
DeerMaximum
Thomas55555
Vilppu Vuorinen
Jan Rieger
Jan-Philipp Benecke
Joakim Sørensen
Manuel Dipolt
Cyrill Raccaud
Massimo Savazzi
suaveolent
Frank Wickström
Brett Adams
John Hess
Markus Jacobsen
J. Nick Koston
Dave Leaver
Joost Lekkerkerker
Steven B
Christophe Gagnier
Galorhallen
Josef Zweck
Robert Resch
Leendert Gravendeel
Peter Winkler
Phil Bruckner
Michaël Arnauts
Ståle Storø Hauknes
Marc-Olivier Arsenault
nic
wilburCforce
Alexander Somov