b01b33c304
Add trigger condition ( #51710 )
...
* Add trigger condition
* Tweaks, add tests
2021-06-11 15:05:57 +02:00
7d03b02192
Spelling fixes ( #51642 )
2021-06-11 13:35:03 +02:00
b4aeddd12f
Add 100% test coverage to WLED integration ( #51743 )
2021-06-11 12:45:22 +02:00
2a51587bc3
Remove reverse_order (replaced by generic swap) ( #51665 )
...
Remove reverse_order (replaced by generic swap).
2021-06-11 11:41:41 +02:00
7393cba0a5
Mock WLED in all WLED tests ( #51724 )
...
* Mock WLED in all WLED tests
* Update tests/components/wled/conftest.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Remove useless AsyncMock
* Add missing asserts
Co-authored-by: Erik Montnemery <erik@montnemery.com>
2021-06-11 11:36:54 +02:00
ba6b527d61
Improve editing of device actions referencing non-added HVAC ( #51706 )
...
* Improve editing of device actions referencing non-added HVAC
* Improve test coverage
2021-06-11 11:13:55 +02:00
0404acddf9
Add support for state_class ( #51512 )
2021-06-10 21:31:21 +03:00
4722fdf465
Fix race condition in samsungtv turn off ( #51716 )
...
- The state would flip flop if the update happened before the TV had fully shutdown
2021-06-10 19:24:30 +02:00
ab490bc769
Ensure samsungtv reloads after reauth ( #51714 )
...
* Ensure samsungtv reloads after reauth
- Fixes a case of I/O in the event loop
* Ensure config entry is reloaded
2021-06-10 19:23:00 +02:00
d75c97cbf3
Revert "Set Fahrenheit reporting precision to tenths for Homekit Controller climate entities ( #50415 )" ( #51698 )
2021-06-10 15:41:42 +01:00
fca0446ff8
Add pollen sensors to Ambee ( #51702 )
2021-06-10 14:18:09 +02:00
d9110b5208
Improve editing of device triggers referencing non-added binary sensors ( #51700 )
2021-06-10 13:06:01 +02:00
c1bc99890d
Improve editing of device triggers referencing non-added cover ( #51703 )
2021-06-10 12:46:28 +02:00
b1022ce84e
Use supported color modes in deCONZ integration ( #51656 )
...
* Initial commit everything is working, need to reevaluate tests
* Fix supported color modes and hs_color
* Attest color mode
2021-06-10 08:51:58 +02:00
e5c6ac5ba8
Add 100% test coverage to Ambee integration ( #51670 )
...
* Add 100% test coverage to Ambee integration
* Add tests for device and entity registry
2021-06-09 20:23:16 +02:00
332c86ff8c
Restructure WLED integration ( #51667 )
2021-06-09 20:15:46 +02:00
a6a34c76f7
Add color mode support to WLED ( #51648 )
...
* Add color mode support to WLED
* Update homeassistant/components/wled/light.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/wled/light.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/wled/light.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/wled/light.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* black
* property, property
Co-authored-by: Erik Montnemery <erik@montnemery.com>
2021-06-09 13:31:31 +02:00
d021e593d3
Add Ambee integration ( #51645 )
2021-06-09 13:22:37 +02:00
87813ea991
Tweak light.valid_supported_color_modes ( #51659 )
2021-06-09 12:53:08 +02:00
443463e19d
Emulate color_temp for lights which support color or white ( #51654 )
...
* Emulate color_temp for lights which support color or white
* Support legacy lights
* Tidy up group.light code
* Improve color_temp to white conversion
* Remove color_temp to white conversion
* Add test
* Tweak deconz test
2021-06-09 11:23:01 +02:00
a1e3283f8f
Improve editing of device automations referencing non-added sensors ( #51312 )
2021-06-08 23:28:08 -07:00
d56bd61b93
Populate upnp devices from ssdp ( #51221 )
...
* Populate upnp devices from ssdp
* Update tests since data comes in via HASS format now
* pylint
2021-06-08 22:32:06 +02:00
2eb6f16a94
Fix mysensors awesomeversion strategy usage ( #51627 )
...
* Update awesomeversion strategy use in mysensors
* Remove default version
2021-06-08 20:24:54 +02:00
67f3e717a8
Add support for color_mode white to tasmota light ( #51608 )
2021-06-08 17:43:04 +02:00
6de604a326
Fix mysensors tests typing ( #51621 )
2021-06-08 14:28:36 +02:00
3fa6c97801
Address late review of nsw fuel station ( #51619 )
2021-06-08 14:26:43 +02:00
a4587b5f3b
Deprecate support for undocumented value_template in MQTT light ( #51589 )
2021-06-08 08:23:51 +02:00
01d4140177
Modern Forms integration initial pass - Fan ( #51317 )
...
* Modern Forms integration initial pass
* cleanup of typing and nits
* Stripped PR down to Fan only
* Review cleanup
* Set sleep_time to be required for service
* Adjust minimum sleep time to one minute.
* Code review changes
* cleanup icon init a little
2021-06-08 08:22:50 +02:00
6c2e452e3d
Fix kraken I/O and sleep in tests ( #51599 )
2021-06-08 03:11:17 +02:00
e257dd4d07
Fix Sonos battery sensors on S1 firmware ( #51585 )
2021-06-08 00:29:17 +02:00
bc30920824
Correctly support use of Farenheit in Gree Climate component ( #50260 )
2021-06-08 00:21:03 +02:00
3db21b407a
Add support for color_mode white to demo light ( #51575 )
...
* Add support for color_mode white to demo light
* Fix unique_id for newly added light
* Update tests
2021-06-07 20:26:25 +02:00
a3146ad150
Fix loop in tod binary sensor ( #51491 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-06-07 11:21:10 -07:00
fcb8ab23ab
Improve log message when zone missing in geolocation trigger ( #51522 )
...
* log warning message if zone cannot be found
* improve log message
* add test case
2021-06-06 20:03:56 +02:00
e560e623e9
Add color_mode white ( #51411 )
...
* Add color_mode white
* Include brightness in white parameter
* Reformat
* Improve test coverage
2021-06-06 11:13:18 +02:00
59b5f94569
Add fix delay after send/request to allow RS485 adapter to switch in modbus ( #51417 )
2021-06-05 14:41:32 +02:00
b8afb7dcfe
Check initial connect() worked in modbus ( #51470 )
...
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Franck Nijhof <git@frenck.dev>
2021-06-05 14:39:09 +02:00
12ac4109f4
Ensure ssdp can callback messages that do not have an ST ( #51436 )
...
* Ensure ssdp can callback messages that do not have an ST
Sonos sends unsolicited messages when the device reboots. We want
to capture these to ensure we can recover the subscriptions as soon
as the device reboots
* Update homeassistant/components/ssdp/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
2021-06-05 09:23:51 +02:00
0cd0733438
Remove empty tests for ping now that the code in icmplib is used ( #51454 )
2021-06-05 01:20:41 +03:00
05241a7a68
Allow number/sensor entities in numeric state conditions/triggers ( #51439 )
2021-06-04 18:14:48 +02:00
5e067c2631
Allow unlimited scan_interval in modbus ( #51471 )
...
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2021-06-04 18:06:44 +02:00
c1111afef8
Allow registering a callback to ssdp that matches any key value ( #51382 )
2021-06-03 08:26:37 -10:00
ba6a0b5793
Fix no value error for heatit climate entities ( #51392 )
2021-06-02 21:07:47 -07:00
2222a121f4
Add support for fan speed percentage and preset modes to google_assistant integration ( #50283 )
...
* support relative fan speeds
* fan preset modes
* improve tests
* Revert relative speed code report zero percentage
2021-06-02 22:09:22 +02:00
132ee972bd
Add media_player.group ( #38855 )
...
* Add media group
* Minor improvements
* Use the async api for all methods
* Improve type hints
* Add missing methods
* Add tests
* Rename HomeAssistantType —> HomeAssistant
* Add more tests
* Fix unknown state
* Make some callbacks
* Add more tests
* Fix unknown state properly
* Fix names for callbacks
* Fix stop service test
* Improve tests
2021-06-02 21:25:15 +02:00
c057c9d9ab
Add Hyperion camera feed ( #46516 )
...
* Initial Hyperion camera.
* Improve test coverage.
* Minor state fixes.
* Fix type annotation.
* May rebase and updates (mostly typing).
* Updates to use new camera typing improvements.
* Use new support for returning None from async_get_mjpeg_stream .
* Codereview feedback.
* Lint: Use AsyncGenerator from collections.abc .
* Update homeassistant/components/hyperion/camera.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2021-06-02 09:39:19 -07:00
68714c2067
Update ping to use asyncio function in icmplib ( #50808 )
2021-06-02 06:10:33 -10:00
3de29a7606
Add binary_sensor tests for devolo Home Control ( #49843 )
...
Co-authored-by: Markus Bong <Markus.Bong@devolo.de>
2021-06-02 13:59:35 +02:00
1d9d9021de
Do not attempt to unload non loaded config entries ( #51356 )
2021-06-02 10:00:24 +02:00
10dccc6734
Move pymodbus test fixtures to test_init ( #51244 )
2021-06-02 00:00:44 +02:00
Erik Montnemery
Ville Skyttä
Franck Nijhof
jan iversen
Maciej Bieniek
J. Nick Koston
Jc2k
Robert Svensson
Martin Hjelmare
Nick Whyte
Brian Towles
jjlawren
Clifford Roche
Malte Franken
Raman Gupta
Jan Bouwhuis
definitio
Dermot Duffy
Guido Schmitz