* Add support for Numato 32 port USB GPIO boards
Included are a binary_sensor, sensor and switch component
implementations. The binary_sensor interface pushes updates via
registered callback functions, so no need to poll here.
Unit tests are included to test against a Numato device mockup.
* Refactor numato configuration due to PR finding
* Resolve minor review findings
* Bump numato-gpio requirement
* Load numato platforms during domain setup
According to review finding
* Guard from platform setup without discovery_info
According to review finding
* Move numato API state into hass.data
According to review finding.
* Avoid side effects in numato entity constructors
According to review finding
* Keep only first line of numato module docstrings
Removed reference to the documentation. Requested by reviewer.
* Minor improvements inspired by review findings
* Fix async tests
Pytest fixture was returning from the yield too early executing teardown
code during test execution.
* Improve test coverage
* Configure GPIO ports early
Review finding
* Move read_gpio callback to outside the loop
Also continue on failed switch setup, resolve other minor review
findings and correct some error messages
* Bump numato-gpio requirement
This fixes a crash during cleanup. When any device had a communication
problem, its cleanup would raise an exception which was not handled,
fell through to the caller and prevented the remaining devices from
being cleaned up.
* Call services directly
Define local helper functions for better readability.
Resolves a review finding.
* Assert something in every test
So not only coverage is satisfied but things are actually tested
to be in the expected state.
Resolves a review finding.
* Clarify scope of notification tests
Make unit test for hass NumatoAPI independent of Home Assistant (very basic test of notifications).
Improve the regular operations test for notifications.
* Test for hass.states after operating switches
Resolves a review finding.
* Check for wrong port directions
* WIP: Split numato tests to multiple files
test_hass_binary_sensor_notification still fails.
* Remove pytest asyncio decorator
Apears to be redundant. Resolves a review finding.
* Call switch services directly.
Resolves a review finding.
* Remove obsolete inline pylint config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Improve the numato_gpio module mockup
Resolves a review finding.
* Remove needless explicit conversions to str
Resolves review findings.
* Test setup of binary_sensor callbacks
* Fix test_hass_binary_sensor_notification
* Add forgotten await
Review finding.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump arcam-fmj with better connection failed support
* Log unexpected exceptions in arcam client
* Consider undetected as 2ch to match OSD
* Ask for explicit update on start
* Display a QR code for homekit pairing
This will reduce the failure rate with HomeKit
pairing because there is less chance of entry
error.
* Add coverage
* Test that the qr code is created
* I cannot spell
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* bravia-tv version bump
* Fix Auth Cookies
- Fix authentication cookie expiration.
- Remove obsolete error handling (since bravia-tv==1.0.2)
- Remove obsolete mac address references. (since bravia-tv==1.0.2)
- Update tests.
* fix async_refresh_playing_info
* Improve code format
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Config_entry needs mac address for HA restart
This was mistakenly taken out. Home-Assistant needs to store mac address in
case restarted. TV needs to be on to acquire mac address. This is neccesary
to allow TV to be turned on by Home-Assistant after Home-Assistant is
restarted.
* Skip update() during state changes
It is best for performance to skip updates during state change because
bravia.turn_on() will commonly push async_update() beyond it's update
interval.
* update tests
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* HomeKit: Store generated aid against unique_id where possible
* Fix conflict
* Fix max accessories check
* homekit counts the bridge as an accessory
* Add coverage for aidmanager
* prepare for merge
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix signal collision in tado with multiple accounts
Tado signals were not unique enough to prevent collisions
between accounts with the same zone ids.
* Bump upstream to fix multiple tado accounts
* switch signal undo to async_on_remove
* Bump version now that upstream is released
* bump python-tado
* While its only the dep that changed since the last run, best to force another CI to be sure
* Add Braava support to iRobot Roomba component
* Replace async_add_job with async_add_executor_job in roomba
* Improve readability in roomba
* Improve error handling in roomba
* Cleanup async_update in roomba
* Split into multiple files in roomba
* Hide protocal details in braava
* Switch to push in braava
* Bump roombapy version to 1.5.1
* Add roomba files to .coveragerc
* Fix typo
* Remove side effects from init in roomba
* Implement StateVacuumDevice in Roomba
* Add IRobotEntity base class to braava
* Fix state in roomba
* Add @shenxn as a codeowner of braava
* Updating the panasonic_viera component
* Updating .coveragerc
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Update strings.json
* Rebasing
* Updating the panasonic_viera component
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Adding pt-BR translation
* Removing Brazilian Portugues translations
* Modifying error handling
* Adding SOAPError to except handling
* Updating translation
* Refactoring async_step_import
* Fixing indentation
* Fixing requirements after rebase
* Fixing translations
* Fixing issues after rebase
* Routing import step to user step
* Adding myself as a codeowner
* Rollback modbus to version 0.107.7
Update manifest to not use async.
Rollback entities to sync version.
Keep newer modifications apart from async.
Rollback __init__ to sync version but keep the new functionality.
add async sub directory
Adding the current (not working) version in a sub directory,
to allow easy sharing with a few alfa testers.
The async version are to be updated to use the serial/tcp already
available instead of the flaky pymodbus version. pymodbus is still
needed to encode/decode the messagess.
Update test cases to reflect sync implementation, but
keep the new functionality like e.g. conftest.py.
* do not publish async version
The async version will be made available in a forked repo, until
it is ready to replace the production code.
Maciej Bieniek
clssn
J. Nick Koston
Quentame
Bram Kragten
MatsNl
Joakim Plate
Aaron Bach
Franck Nijhof
Bernhard B
Jason Hunter
Alexei Chetroi
Ziv
jrester
kennedyshead
David Nielsen
Daniel Høyer Iversen
Erik Montnemery
Pascal Vizeli
escoand
Jc2k
jjlawren
Paulus Schoutsen
Xiaonan Shen
Jeff Irion
João Gabriel
Olivier B
jan iversen
Daniel Perna
Robert Svensson