* Add Streamlabs Water Monitor
* Fail Streamlabswater component setup when given invalid parameters
The Streamlabs Water component is unable to recover if it is given
an invalid API key or location id so this change is to ensure
we validate they are correct during setup and return a failure
if they are not.
* Prime Streamlabswater component sensors so data is available immediately
The sensors for the component were not causing an immediate load of
data from the API when being set up so there was some lag after
startup before values would show up. This change does an explicit
update when the sensors are setup to ensure data is viewable
immediately after startup.
* Switch Streamlabswater logging to use %s for string formatting
* Update Streamlabswater component with correct dependencies
Dependencies were incorrectly specified using DEPENDS rather
than DEPENDENCIES
* Streamlabswater pull request feedback
Remove detailed class docstrings since they're in the documentation,
reduce code duplication in sensor classes, and remove periods from
the end of log messages.
* Reduce line length in Streamlabswater sensor
* Add docstring on Streamlabswater service callback method
* Get rid of unnecessary initializers in Streamlabswater sensor
* Add manifest file for Streamlabs Water Monitor
* Remove unused REQUIREMENTS
* Added Google Cloud TTS service component feature
* Added Neutral voice gender
* Added line break at the end of files
* Updated CODEOWNERS, reqirements_all.txt and .coveragerc
* Fixed some ci/circleci: static-check errors
* Fixed some ci/circleci: static-check error
* Fixed some ci/circleci: pylint errors
* Fixed some ci/circleci: pylint errors
* * made supported_options const
* fixed direct env variable access
* Fixed import order
* * Component renamed
* Added encoding parameter
* Other fixes
* Changed folder name in .coveragerc
* * Removed whitespaces in blank lines
* Split long line
* Removed whitespaces in blank lines
* ci/circleci: static-check
* Fixed requirements_all.txt
* Added speed, pitch and gain parameters
* Added speed, pitch and gain as supported options
* Split too long line
* * Added profiles parameter
* Changed supported languages and encodings values
* Added parameters validations
* Fixes
* Fixes
* Fixes
* Fixes
* Fixes
* Changed options validation
* Added ToggleEntity save and restore state mechanism
* Revert "Added ToggleEntity save and restore state mechanism"
This reverts commit 0e275014
* Basic local SolarEdge monitoring for energy / power
* Basic local SolarEdge monitoring for energy / power
* generated CODEOWNERS, requirements, excluded tests
* generated CODEOWNERS, requirements, excluded tests
* lint fixes, etc
* lint fixes, etc
* Fix docstyle for init
Of course thats the file I forgot to run tests on
* Load all sensors by default
They use the same API endpoint. This changes was made per https://github.com/home-assistant/architecture/pull/244
* remve unneded date/time
* ran hassfest again
* add throttle when updating
* readd solax, mistakenly removed
* Update sensor.py
* Adds AdGuard Home integration
* 👕 Addresses linting warnings
* 🚑 Fixes typehint in async_setup_entry
* 👕 Take advantage of Python's coalescing operators
* 👕 Use adguard instance from outer scope directly in service calls
* 👕 Use more sensible scan_interval default for sensors
* 👕 Adds specific files to .coveragerc
* ☔ Added tests and small changes to improve coverage
* 🔨 Import adguardhome dependencies at the top
* 🚑 Converted service handlers to be async
* 🔥 Removed init step from config flow
* Bumped to version 2.0
* Updated requirements
* Updated requirements and coveragerc
* Removed long lines, changes to coveragerc and requirements
* Fixed under-indented lines
* Fixed invalid syntax
* Updated .coveragerc to include repetier/__init__.py and sensor.py
* Module update
* Rebased to latest dev
* Blank lines fix
* Add missing manifest.json
* Update requirements
* Bumped component to new API module style
* Removed whitespaces and line feeds
* Added missing newline
* Added missing heated chamber sensor
* Fixed wrong indentation
* Various fixes
* Various build fixes
* Clean up
* Load platform only once
* Sort imports
* Add printer api
* Clean up
* Build out sensor classes
* Clarify temperature sensor variable names
* Move constants
* Clean up name
* Run script/gen_requirements_all.py
* Working code, missing auto add of new sensors
* Updated code to return proper device_class and timestamp
* Removed unnessecary code
* Renamed elapsed and remaining sensors
* Dynamically adding sensors as they become available
* Rebased .coveragerc due to conflicts
* Code changes and cleanup
* Removed whitespace and code simplification
* v1 of Azure Event Hub History component
* updates to EH
* small fix
* small updates and changed requirements_all
* new version of Event Hub component
* redid config to just ask names
* small edit
* latest version of EH component
* updated codeowners
* codeowner fix
* typo in domain
* updates based on reviews.
* using built-in jsonencoder for DT
* delete unused import
* Solax inverter direct API
* Linter compliance
* lint++
* move api communication to external lib
* lint++
* requirements
* Revert "requirements"
This reverts commit 82a6c0c095.
* potentially?
* Addressing review comments
* Also update CODEOWNERS
* Only update sensor state if data has changed
* Added support for MCP23017 I2C GPIO extender.
* Updated .coveragerc to exclude mcp23017 component from tests.
* Generated CODEOWNERS for mcp23017 usign script.
* Removed .svn folder that had been accidentally uploaded.
* Added link to www.home-assistant.io docs in manifest.json
* Fixed logic error in switch platform.
* Cleaned up code and removed unnecessary should_poll() function.
* Limited the options for pull mode to UP and DOWN
* Fixed line too long in binary sensor.
* Fixed line too long on switch.py
* Changed to setup_platform.
* Reorder constants
* Added new component meteoalarm
* Update sensor.py
* Update manifest.json
* Update manifest.json
* Update manifest.json
* Added file CODEOWNERS
* Modified some code, thanks @amelchio
* removed Throttle because is not being used anymore
* Update _attributes ad _state
* some cleanup
* Update sensor.py
Change sensor to binarysensor
* Rename sensor.py to binary_sensor.py
rename the file
* Update binary_sensor.py
Removed BinarySensorDevice from class
* Update binary_sensor.py
Made a mistake with BinarySensorDevice
* Update binary_sensor.py
clean up white spaces
* Update binary_sensor.py
Fix BinarySensorDevice
* Update binary_sensor.py
cleanup the import libs
* modified __init__
* fix
* final fix, thanks @amelchio
* forgot to change the sensor.py
* correct some typo in text
* fix typos
* fix another typo
* fix typo
* Updated to the current version of dev
* Added the component to .coveragerc
* Added __init__.py and manifest.json
* Changed the manifest to comply the json format
* Changes in for complete the PEP8 Code
* Fixed the api call to use PyPI package
* Fixed API correrct call
* Fixes for complete the requirements
* Added dependencies in manifest.json
* Changed the __init__.py to complete PEP8
* Simplified the __init__.py
* Runned codeowner script
* executed gen_requirements_all.py
* Direct call for dicts and unit changed to minutes
* Fixed the optional dict call, sorry, my bad, I did not that
* Deleted unused vars
* Changed optional parameter to required
* Remove blank first line
* ptvsd debugger component.
* Add test case
* ptvsd as test dependency
* Fix for 3.5
* Fixed bootstrap test
* Use dict direct lookup.
* Don't need to load dependencies.
* Get the test working.
* 3.5 fix
* Set mock return value
* Put tests back, but skip them
* Change log level
* Added component named switcher_kis switcher water heater integration.
* Fixed conflicts.
* Updated requirements.
* Added manifest.json file and updated CODEOWNERS.
* Fixed requirements_all.txt.
* Better component tests.
* Removed unnecessary parameter from fixture function.
* Removed tests section from mypy.ini.
* Remove unused ENTITY_ID_FORMAT.
* Stop udp bridge when failed to setup the component.
* Replace DISCOVERY_ constants prefix with DATA_.
* Various change requests.
* Fixed constant name change remifications.
* Added explicit name to fixture.
* Various change requests.
* More various change requests.
* Added EventType for homeassistant.core.Event.
* Switched from event driven data distribution to dispatcher type plus clean-ups.
* Removed name and icon keys from the component configuration.
* Various change requests.
* Various change reqeusts and clean-ups.
* Removed unnecessary DEPENDENCIES constant from swith platform.
* Replaced configuration data guard with assert.
* Removed unused constants.
* Removed confusing type casting for mypy sake.
* Refactor property device_name to name.
* Removed None guard effecting mypy only.
* Removed unnecessary function from switch entity.
* Removed None guard in use by mypy only.
* Removed unused constant.
* Removed unnecessary context manager.
* Stopped messing around with mypy.ini.
* Referring to typing.TYPE_CHECKING for non-runtime imports.
* Added test requierment correctyly.
* Replaced queue.get() with queue.get_nowait() to avoid backing up intervals requests.
* Revert changes in mypy.ini.
* Changed attributes content to device properties instead of entity properties.
* Fixed typo in constant name.
* Remove unnecessary async keyword from callable.
* Waiting for tasks on event loop to end.
* Added callback decorator to callable.
* Adding Genius Hub
* Added Genius hub
* Correct hound errors
* Correct hound errors.
* Correct tox errors.
* Fix travis errors
* Correct sensor names
* Correct travis errors
* Correct hound errors
* Follow up from code review by Martin Hjelmare
* More changes from code review.
* Attempt to resolve conflicts in requirements_all
* de-lint for the houndci-bot
* better logging message, and small tidy-up
* minor refactor and de-lint
* domain name should be the same as the component name
* use self where appropriate
* minor de-lint
* add entities as a single call
* de-lint
* all read-only attrs almost done
* refactor - near the end
* change state/,ode mapping
* override temp from curr_temp
* all read-only properties working
* working now
* ready for PR, but need to remove logging
* de-lint
* de-linted, ready for merge
* de-linted, ready for merge 2
* didn't like import in climate/__init__
* improve footprint logic
* add manifest.json
* add manifest.json 2
* correct a regression
* fix regression with device.is_on()
* use latest client library
* update to latest client library, 3.3.6
* delint and shoudl be OK to go
* Added basic Supla (https://www.supla.org) support (covers)
* PySupla upgrade, minor spelling corrections and .coveragerc update
* Linter errors cleanup
* More linter cleanups.
* Documentation link removal and import sorting
* Docstring formatting
* PR suggestions
* Styling and linting
* PySupla version update
* Removal of ALLOW_EXTRA in SERVER_CONFIG
* Return False on failed connection validation, function order cleanup
* Component manifest
* Missing return None and different way of setting unique_id
* CODEOWNERS update
* CircleCI nudge
* Start with Stiebel Eltron heatpump
* STE HP
* Add read of operating mode
* Add read-write operation mode
* Further extract ModBus access
* Separation of platform and API
* Last changes
* Use modbus hub
* Update module doc with config
* Clean up platform code
* Cleanup and update to dev2 of pystiebeleltron
* Remove slave configuration
* Add translation of states
* Make name parameter optional
* Consolidate platform
* Correct .coveragerc after conflict
* Prepare component for sensor platform
* Fix issues found in review
* Remove custom states and map to existing HA states
* Force update, when values are modified
* Update CODEOWNERS and requirements_all.txt
* Fix .coveragerc file
* Exclude stiebel_eltron components in .coveragerc
* Break out to module level constant
* Rename constant
* Removed REQ and DEP constant.
* Logi Circle now uses OAuth2 for authentication, added config flow.
* Service calls now dispatched to camera entities via signalled events
* Update from PR review
* Add unit tests for config flow
* Updated CODEOWNERS
* Reverted change to .coveragerc
* Improved test coverage of config flow
* Work on PR comments
* Work on PR comments
* Update imports
* Work on schema validation
* Fix package
* Add bomradarcam to .coveragerc
* Improve error message for location
* Delinting
* Correct module name in .coveragerc
* Add manifest.json
* Update requirements_all.txt
* Merge bomradarcam into existing bom integration
* Added MyLink component
* Updated requirements.txt
* Fix lint issues
* Removed ‘Scene’ functionality
* Removed state restoration, as state is no longer tracked
* Add component manifest
* Remove documentation links in Docstring
* Removed redundant try/except block
* Removed default dict
* Removed features already implemented in default CoverDevice
* Removed attributes for tracking state
* Simplified loading of covers
No options exist other than reversal, so just check reversal status directly and update if needed
* Reimplemented is_closed property
* Import ENTITY_ID_FORMAT from base component
* Removed misc unused vars
* Update module docstrings to one line
* Removed too many blank lines, giving one back :)
* Return none on TimeoutError
* Added component to .coveragerc
* Rebrand Cisco Spark notify to be Cisco Webex Teams
* Remove property from class
* Switch to use html for api
* Update notify.py
* Rename CONF_ROOMID to CONF_ROOM_ID
* updated
* Fix lint errors
* Update notify.py
* Update notify.py
* Also validate room ID
* Update notify.py
* Update .coveragerc
* Update notify.py
## Description:
Denon HEOS media player.
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#8848
## Example entry for `configuration.yaml` (if applicable):
```yaml
heos:
host: HEOS-1
```
## Checklist:
- [X] The code change is tested and works locally.
- [X] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [X] There is no commented out code in this PR.
If user exposed functionality or configuration variables are added/changed:
- [X] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [X] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [X] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [X] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [X] New files were added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
Co-authored-by: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Split out mopar into a component and sensor platform
* Add the mopar switch platform
* Add the mopar lock platform
* Clean up and bump version
* Update per review
* Re-add service to trigger horn
* Clean up again
* Don't call async from sync context
* Lint
* Implement changes from review
* Lint
* A little more clean up
* The Great Migration
* removed outdated tests
* Upgraded enturclient to v0.2.0
- client has gone async
- configurable if non boarding departures should be omitted from result
- configurable how many departures should be shown
- more clear which attributes are included and when
* reduced nesting and clearing of attributes
* Removed test data
* ensure attribution and stop id in attributes
* docstring fixes
* fix rebase errors
went a bit too fast on continue on one of the conflicts..
* fix test requirements comment from gen
## Description:
Add support for AC-models that follows the Tfiac protocol. Built together with @mellado.
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#8910
## Example entry for `configuration.yaml` (if applicable):
```yaml
climate:
platform: tfiac
host: 192.168.10.26
```
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
If user exposed functionality or configuration variables are added/changed:
- [x] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [x] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [x] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [x] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [x] New files were added to `.coveragerc`.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
Co-authored-by: Robbie Trencheny <me@robbiet.us>
* Initial draft
* Add tests for init
Fix hound comments
* Add tests for device
Change parameter handling to make device easier to test
* Remove superfluous functionality per Martins request
* Fix hound comments
* Embedded platforms
* Fix device import
* Config flow retry
* Options default values will be set automatically to options in config entry before component can be used
* Clean up init
Add populate options
Fix small issues in config flow
Add tests covering init
* Improve device tests
* Add config flow tests
* Fix hound comments
* Rebase miss
* Initial tests for binary sensors
* Clean up
More binary sensor tests
* Hound comments
* Add camera tests
* Fix initial state of sensors
* Bump dependency to v17
* Fix pylint and flake8
* Fix comments
* Fire events with websocket messages.
* Added tests to validate
* Fixed api_streams sensor to use new sensor
* Delete from coverageac as now works.
* Removed websocket request event.
* Use dispatcher instead of events.
* Moved sensor to under websocket_api
* Changes as per code review
* Fixed tests.
* Modified test
* Patch
* Moved climate components with tests into platform dirs.
* Updated tests from climate component.
* Moved binary_sensor components with tests into platform dirs.
* Updated tests from binary_sensor component.
* Moved calendar components with tests into platform dirs.
* Updated tests from calendar component.
* Moved camera components with tests into platform dirs.
* Updated tests from camera component.
* Moved cover components with tests into platform dirs.
* Updated tests from cover component.
* Moved device_tracker components with tests into platform dirs.
* Updated tests from device_tracker component.
* Moved fan components with tests into platform dirs.
* Updated tests from fan component.
* Moved geo_location components with tests into platform dirs.
* Updated tests from geo_location component.
* Moved image_processing components with tests into platform dirs.
* Updated tests from image_processing component.
* Moved light components with tests into platform dirs.
* Updated tests from light component.
* Moved lock components with tests into platform dirs.
* Moved media_player components with tests into platform dirs.
* Updated tests from media_player component.
* Moved scene components with tests into platform dirs.
* Moved sensor components with tests into platform dirs.
* Updated tests from sensor component.
* Moved switch components with tests into platform dirs.
* Updated tests from sensor component.
* Moved vacuum components with tests into platform dirs.
* Updated tests from vacuum component.
* Moved weather components with tests into platform dirs.
* Fixed __init__.py files
* Fixes for stuff moved as part of this branch.
* Fix stuff needed to merge with balloob's branch.
* Formatting issues.
* Missing __init__.py files.
* Fix-ups
* Fixup
* Regenerated requirements.
* Linting errors fixed.
* Fixed more broken tests.
* Missing init files.
* Fix broken tests.
* More broken tests
* There seems to be a thread race condition.
I suspect the logger stuff is running in another thread, which means waiting until the aio loop is done is missing the log messages.
Used sleep instead because that allows the logger thread to run. I think the api_streams sensor might not be thread safe.
* Disabled tests, will remove sensor in #22147
* Updated coverage and codeowners.
* Consolidate
* Fix tests
* Update imports
* Fix import
* Use importlib because integration and package share name
* Fix more tests
* Update .coveragerc and CODEOWNERS
* Working on adding androidtv functionality to firetv component
* 'should_poll' must return True
* Change 'properties' to 'device_properties'
* Also mention 'Android TV' in services.yaml
* Use GitHub for 'androidtv' requirement
* Add 'androidtv==0.0.10' to requirements, remove 'firetv==1.0.9'
* Add 'GET_PROPERTIES' adb command option; use pypi for REQUIREMENTS
* Rename integration from 'firetv' to 'androidtv'
* Change default name to 'Android TV'
* Rename integration from 'firetv' to 'androidtv'
* Change firetv to androidtv in .coveragerc
* Change firetv to androidtv in requirements_all.txt
* Remove 'DEFAULT_APPS'
Nanoleaf component now supports both nanoleaf lights, Aurora and Canvas
Changed the dependency to pynanoleaf, nanoleaf does not seem to be
maintained anymore
* Move cisco me to new layout
* Add docstring
* Move items out of init method and pass the controller instance to the scanner in get_scanner
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Fix build error
* Cleanup based on comments.
* Add Time of Flight Sensor using VL53L1X
* Fix issues found by bot
* Fix issues from bot
* Remove extra logs
* Keep removing logs dependencies not used
* Remove log from update
* Add logger info to async_update
* Fix over-indented line
* Fix pylint error
* Remove logger reporting successful operation
* Update requirements
* Update requirements_all.txt
* Update requirements_test_all.txt
* Used isort to keep imports and added STMicroelectronics to docstring
* Replace time.sleep by asyncio.sleep
* Add requirements to COMMENT_REQUIREMENTS and fix typo
* Using async_add_executor_job to schedule the call in the pool
* Fix typo
* Optimize async_update
* Updated requirements files
* Group and schedule calls that should be run sequentially
* Fix lint errors
* Revision showing development history
* Cleaning and typos
* Cleaning and typos
* Fix wrong-import-order
* Fix gen_requirements_all
* Schedule rpi_gpio I/O on the executor thread pool
* Fix partial parameters
* Fix bot error - add blank line
* Fix lint error
* Remove dependencies from requirements
* Review initial commits
* Move all device I/O to async_update
* Update requirements_all.txt
* Revised header with no url to the docs
* Use async_added_to_hass to add and initialize the sensor
* Add docstring to init()
* Move sensor.open() to async_setup_platform
* Remove logging and async
* Fix typo
* Move sensor.open to safe initialization
* Fix typo
* Fix typo
* Add the new tof module to .coveragerc
* Move the sensor platform under a tof package
* Update .coveragerc and requirements_all for tof package
* Initial pass of a mobile_app component
* Fully support encryption, validation for the webhook payloads, and other general improvements
* Return same format as original API calls
* Minor encryption fixes, logging improvements
* Migrate Owntracks to use the superior PyNaCl instead of libnacl, mark it as a requirement in mobile_app
* Add mobile_app to .coveragerc
* Dont manually b64decode on OT
* Initial requested changes
* Round two of fixes
* Initial mobile_app tests
* Dont allow making registration requests for same/existing device
* Test formatting fixes
* Add mobile_app to default_config
* Add some more keys allowed in registration payloads
* Add support for getting a single device, updating a device, getting all devices. Also change from /api/mobile_app/register to /api/mobile_app/devices
* Change device_id to fingerprint
* Next round of changes
* Add keyword args and pass context on all relevant calls
* Remove SingleDeviceView in favor of webhook type to update registration
* Only allow some properties to be updated on registrations, rename integration_data to app_data
* Add call service test, ensure events actually fire, only run the encryption tests if sodium is installed
* pylint
* Fix OwnTracks test
* Fix iteration of devices and remove device_for_webhook_id
* Register 'media_player.firetv_adb_cmd' service
* Wrap the 'firetv_adb_cmd' service with 'adb_decorator'
* Address reviewer comments
* Move firetv to its own platform
* Move 'adb_command' service description
* Rename DOMAIN to FIRETV_DOMAIN
* Import KEYS in __init__ method
* Change 'self.KEYS' to 'self.keys'
* Update firetv in .coveragerc
* 'homeassistant.components.media_player.firetv' -> 'homeassistant.components.firetv'
* 'homeassistant.components.firetv' -> 'homeassistant.components.firetv.media_player'
* Move iperf3 sensor to a standalone component
* Split out iperf3 into a component with a sensor platform
* Update coverage and requirements
* Add services.yaml
* Clean up a little bit
* Lint
* Lint
* Added work so far.
* Change interval so nobody drains their battery when I put this online
* Added the warning notice.
* Async setup
* Still broken, but we're getting there.
* Back to synchronous, moved refresh stuff into DataStore
* Functional sensors!
* Added working switches, tweaked intervals a bit
* Fixed turn off result
* Moved plug status to binary_sensor, added smart intervals
* Documentation and car nickname stuff
* Syntax fixes and coveragerc additions
* Style fixes
* Fixing the final line length
* Fixed an issue with newer models and bad climate data
* Forgot to check my line endings.
* New icons for most of the components
* Hotfix for handling Nissan's awful servers
* Merge in fixes made by Phil Cole
Remove invalid FIXMEs and update TODOs
Fixes for pylint and test for CarwingsError exception rather than Exception
Flake8 fixes
Add pycarwings2 to requirements_all.txt
Add extra configuration documentation.
Use pycarwings2 from pip. Check server dates between requests.
Add sensor device class for battery.
Async conversion fixes
flake8 fixes and docstrings
Non-async charging is OK
Handle multiple cars in the configuration
Convert to async. Better imports for platforms
Fix scanning interval & prevent extra refreshes. async switchover
Check discovery_info to prevent load of platforms
Ensure update frequency is always above a minimum interval (1 min).
Platforms don't have return values
Use values() instead of items() when not using key
Use snake_case (LeafCore becomes leaf_core)
commit 418b6bbcc49cf2909aac85869440435410abf3fd
* Add pycarwings2 to requirements_all.txt
* Make stopping charge error an 'info'. Remove TODO.
* Request update from car after sending start charging command.
* Delay initial (slow) update for 15 seconds and make async
* Flake8 line length fixes
* Try to fix D401 'imperative mood' git diff tox errors
* Try to fix more D401 'imperative mood' tox errors
* Default interval of an hour in code, to match comments.
* Update to pycarwings2 2.3
* Update to pycarwings2 2.3 in requirements_all.txt
* Remove documentation, instead refering to home-assistant.io
* Remove unneeded dispatcher_send()
* Remove unneeded requirements comments
* Combine excess debugging.
* Remove single line method signal_components()
* Bump to version 2.4 of pycarwings2
* Remove unused dispatcher_send
* Simplify logging of LeafEntity registration
* Update requirements_all.txt
* Multiple changes
Increase timeout to 30 seconds
Only consider battery_status
Fix plugged in status
Better attempts at try/exception handling
* Fix line length
* Use pycarwings 2.5
* Remove pointless 'is True'
* Remove unnecessary 'is True/False'
* Remove unnecessary 'is True/False'
* Use LENGTH_MILES and LENGTH_KILOMETERS
* Remove excess logging in setup_platform()
* Remove unnecessary 'is True'
* Use pycarwings2 version 2.6
* Require pycarwings2 version 2.7.
* Increase sleep delay for climate and location reponses.
* Remove unnecessary 'is True'
* Increase frequent polling warning to _LOGGER.warning()
* Use DEVICE_CLASS_BATTERY
* Remove extraneous 'is True'.
* Move icon strings to constants.
* Remove unneeded key.
* LeafRangeSensor ac_on property is internal.
* Flake8 missing line
* Remove homebridge attributes.
* Remove round battery % and range to whole numbers
* Use pycarwings2 2.8
* Move to embedded component model
* Reduce maximum attempts to 10 (5 mins)
* Include attempt count in 'waiting' log message
* Use await instead of yield. Remove @asyncio.coroutine decorators.
* Add @filcole as nissan_leaf codeowner
* Fix checking for if not data returned from vehicle. Don't double send signal on location update.
* Exposed updated_on, update_in_progress and next_update attributes.
* Add nissan_leaf.update service that triggers an update.
* Flake8 line fixes
* Remove excess and double logging.
* Add updated_on attribute for device tracker.
* Fix crash if pycarwings2 doesn't provide cruising ranges.
* Minor changes
* Minor changes
* Minor changes
* Minor changes
* Minor changes
* new weather component for meteofrance
* linting
* upgrade meteofrance package version
* Update .coveragerc
* Remove updates to the weather component architecture
* Rewrite Météo-France as a component
* Update .coveragerc
* Update requirements_all.txt
* remove Weather Card option
* Update conf name
Changing conf name to something more universal for worldwide weather forecast (postal code was only relevent for France)
* Update meteofrance pypi package
* fix line too long
* Update requirements_all.txt
* prevent from calling an API endpoint if not in monitored conditions
* fix stale url and remove blank line
* Insure that all cities are unique
* rename CONF_ATTRIBUTION
* Updating data from component setup
* fix missing extra lines
* Add Rejseplanen danish public transport sensor component
* Removed commented out code and fixed style errors
* Use rjpl pypi package for API calls.
* Fix platform schema config and code cleanup.
* Use updated rjpl library with specific exceptions
* API error message is now logged, unknown state attributes excluded
* added xs1 main component
added implementations for switch, sensor, climate and binary_sensor
* updated code
fixed styling
added comments
removed binary_sensor (wasn't working)
* ran "gen_requirements_all.py" script
* fixed linting issues
* added config options for port and ssl
small fixes
* use already defined config constants instead of defining new ones
* avoid passing in hass to the entity
* use async keyword and proper asyncio calls
limit updates with a global lock to prevent overwhelming the gateway with concurrent requests
change info logger calls to debug
* update dependency
* removed unneeded constant
* fix lint issues
* updated requirements
* removed unused imports
* fixed some flake8 errors
* fixed some flake8 errors
* changed imports to absolute paths
* fixed some lint errors
* fixed some lint errors
* fix update of attached sensor
* reordered imports
added config defaults
check if platform is available
changed docstring
* lint fix
* review fixes
* isort
* import fix
* review fix
* review fix
* review fix
* removed unused imports
* lint fix
* lint fix
* climate fix
exclude sensors that will be used in climate component from default sensor category
* .coveragerc fix
* lint fix
* moved platform to it's own package
* Move sensor.speedtest to the new speedtestdotnet component.
* Split out speedtest.net into a component and sensor platform
* Remove the throttle and add async_track_time_interval
* Add should_poll and cleanup
* Update requirements_all.txt
* Move time interval tracking out of the data class and into the setup method
* Add now=None argument to update
* Split out fastdotcom into a component and a sensor platform
* Update .coveragerc
* Switching to async and using a Throttle
* Add the async_track_time_interval call
* Remove the throttle
* Reorder sensor methods and add should_poll property
* Add component for googlehome
* Add missing name in CODEOWNERS
* Linting issues
* googledevices version bump
* Use NAME from component instead of DOMAIN
* Cleaner handling of accepted devices in for loop
* Fixes one linting issue
* Validate device_types
* Fixes one linting issue
* Fixes linting issue
* Revert 0abb642 and import DOMAIN as GOOGLEHOME_DOMAIN
* Return false if discovery_info is None
* Combine if's in for loop
* Use async_load_platfrom
* Fix line length
* Add error message to user
* Shorter log message
* error -> warning, remove period
* Update .coveragerc
* Move to correct place
* Adding sensor for SolarEdge Monitoring API support
* Adding support for Rova garbage calendar
* Added Rova platform to retrieve garbage pickup times
* Update async to new syntax
Added async_update to sensor class
Added Throttle to Rova update function
Minor code style changes
* Small style fixes
* Removed domain
* Update debug to error messages
Change CONF_MONITORED_VARIABLES to CONF_MONITORED_CONDITIONS
Update async update call to normal update
* Update requirements to rova v0.0.2
Add address check to see if ROVA collects in the given area
* Rename entity names to English
Add json_key to Sensor entities
* Add device_class to the RovaSensor
* Fix pylint and flake8 messages
* Add check for None in case collection date is unknown
* Return device class constant
* New Transmission component and interaction
First commit for New Transmission component and interaction
* Fix commit
* Fix commit
* Fix + Switch checkin
Fix according to failed build and request, first checkin for Turtle Mode Switch in Transmission, still have to figure it out why it's not working.
* Bugfixing
* Fix commit
Multiple fix
* Fix
* fix for missing config
* Update on requirements_all.txt
* Fix in requirements_all.txt
* Fix
* Fix for build
* fix
* Fix
* Fix (again)
* Fix
* Fix indentation
* Fix indentation
* Fix Throttle
* Update .coveragerc
* Fix import and coveragerc
* Added Recollect Waste Curbside Collection sensor for tracking next collection date and for which types of waste.
* Added missing schema attributes.
* Adding requirements and coverage entries for Recollect Waste platform.
* Added exception handling, some other fixes and suggestions from code review.
* Fixed reference to incorrect exception type.
* Updated requirements_all.txt with new version of recollect-waste.
* Added true to add_entities. Created constant for default time interval. Used different pylint exclusion comment.
* Using HA's CONF_SCAN_INTERVAL now. Unique_id is now set in @property.
* Changed parameter of timedelta from seconds to days.
* Added test run of recollect client during setup_platform. Using built in SCAN_INTERVAL now.
* Return nothing in setup_platform if there is an exception.
* Moving existing sensor file
* Initial functionality in place
* Added test for config flow
* Updated coverage and CODEOWNERS
* Linting
* Linting
* Member comments
* Hound
* Moving socket disconnect on HASS stop
* Member comments
* Removed unnecessary dispatcher call
* Config entry fix
* Added support in config flow for good accounts with no devices
* Hound
* Updated comment
* Member comments
* Stale docstrings
* Stale docstring
* Add nilu air_pollutants platform
* Code Review - validation, DRYs, rm state override, new attr
- Repeated code moved to own method.
- Removed override of state property.
- New attr for showing nilu pollution recommendations.
- More validation of stations input.
- Minor fixes and typos.
* Removed unused prop
* Check for none result from client before entity add
* Moved platform to air_quality component
* Updated outdated docstrings
* Minor changes
* Split out dovado to a component and sensor platform
* Lint
* Address code review comments (#20339)
* Switch to using a notify platform for dovado SMS (#20339)
* Optimizing imports
* Remove return on `setup_platform`.
* Clean up unneeded constants
* Add support for Danfoss Air HRV systems.
* Correct lint errors after initial commit of Danfoss Air HRV support.
* A couple of lint fixes for danfoss_air.
* Refactor to comply with HA standards.
* Style fix.
* Use wildcard for danfoss_air in .coveragerc.
* Remove config example from header documentation.
Correct import name for platforms.
* Starting work on ecoal boiler controller iface.
* Sending some values/states to controller.
* Basic status parsing, and simple settings.
* Platform configuration.
* Temp sensors seems be working.
* Switch from separate h/m/s to datetime.
* Vocabulary updates.
* secondary_central_heating_pump -> central_heating_pump2
* Pumps as switches.
* Optional enabling pumps via config.
* requests==2.20.1 added to REQUIREMENTS.
* Optional enabling temp sensors from configuration yaml.
* autopep8, black, pylint.
* flake8.
* pydocstyle
* All style checkers again.
* requests==2.20.1 required by homeassistant.components.sensor.ecoal_boiler.
* Verify / set switches in update().
Code cleanup.
* script/lint + travis issues.
* Cleanup, imperative mood.
* pylint, travis.
* Updated .coveragerc.
* Using configuration consts from homeassistant.const
* typo.
* Replace global ECOAL_CONTR with hass.data[DATA_ECOAL_BOILER].
Remove requests from REQUIREMENTS.
* Killed .update()/reread_update() in Entities __init__()s.
Removed debug/comments.
* Removed debug/comments.
* script/lint fixes.
* script/gen_requirements_all.py run.
* Travis fixes.
* Configuration now validated.
* Split controller code to separate package.
* Replace in module docs with link to https://home-assistant.io .
* Correct component module path in .coveragerc.
More vals from const.py.
Use dict[key] for required config keys.
Check if credentials are correct during component setup.
Renamed add_devices to add_entities.
* Sensor/switch depends on ecoal_boiler component.
EcoalSwitch inherits from SwitchDevice.
Killed same as default should_poll().
Remove not neede schedule_update_ha_state() calls from turn_on/off.
* lint fixes.
* Move sensors/switches configuration to component setup.
* Lint fixes.
* Invalidating ecoal iface cache instead of force read in turn_on/off().
* Fail component setup before adding any platform entities.
Kill NOTE.
* Disallow setting entity names from config file, use code defined default names.
* Rework configuration file to use monitored_conditions like in rainmachine component.
* Killed pylint exception.
Log error when connection to controller fails.
* A few fixes.
* Linted.
* EverLights light integration. Supports single color (with color and brightness parameters) or saved pattern (with effect parameter).
* Fix pylint parameter name warning.
* Code review feedback.
* Add tests for the two helper functions of EverLights component.
* Fixes for review feedback.
* Change test style.
* Style fixes for hound.
* Preparing for transition to config flow
Added multiple gateway support
Reworked parameter flow to platforms to enable multiple controllers
Breaking change to config, now a list of gateways is expected instead of a single config
* Updated coveragerc
Added new location of fibaro component
* Fixes based on code review and extended logging
Addressed issues raised by code review
Added extended debug logging to get better reports from users if the device type mapping is not perfect
* Changhes based on code review
Changes to how configuration is read and schemas
Fix to device type mapping logic
* simplified reading config
* oops
oops
* grr
grr
* change based on code review
* changes based on code review
changes based on code review
* reconfigure zha device service
add log line to reconfigure service for consistency
* add entity functions to support new services
* added new services and web socket api and split them into their own module
* support manufacturer code
logging to debug
get safe value for manufacturer
* update services.yaml
* add comma back
* update coveragerc
* remove blank line
* fix type
* api cleanup - review comments
* move static method to helpers - review comment
* convert reconfigure service to websocket command - review comment
* change path
* fix attribute
* Moved component to a package and added a services.yaml file.
* Fixing coverage issue and grammar issue on the services.yaml file.
* Fixed typo in the services.yaml file.
* added components and requirement
* change config to allow the definition of multiple switches without redefining the gateway
* dont assume false state
fix default value
* added exclude to coveragerc
* sorted imports
* review fixes
* review fixes
* bugfix
review fixes
* review fix
* Initial commit of LCN component and light platform
* Corrected pre-review comments
* Fixed dimming behaviour in combination with transitions for lcn lights
* Removed unused logger
* Combined __init__.py and core.py into lcn.py component. Bumped to pypck==0.5.6
* Fixed .coveragerc
* Bumped to pypck==0.5.7
* Bump to pypck==0.5.8
* Fixed requirements_all.txt
* Moved unique generation of connection names to config schema's validator
* Minor changes due to review comments.
Bump to pypck==0.5.9.
* Address_connection is passed into LcnDevice
* Set should_poll property on LcnDevice to return False
* Moved platform config validation to component. Load platform using discovery helper
* Furtehr changes due to the review
* Light configuration is set required as there are no other platforms up to now
* Added Lutron Homeworks components.
* Made all requested changes other than config.
* Removed commented out code.
* Removed binary_sensor.
Implemented new signal/events for button presses.
Cleaned up some data passing.
* Fixed minor formatting.
* Got rid of unused config stuff.
Reordered imports.
* Missed removing vol, and forgot an extra line.
* More requested changes
Removed HomeworksController, it wasn't needed.
* Removed stale code.
* Imperative doc change.
* Adding sensor for SolarEdge Monitoring API support
* Adding support for Rova garbage calendar
* Update solaredge to pass lint and flake8
* Added solaredge.py to .coveragerc
* Added extend for Voluptuous schema
* Fixed styling issues
* Removed rova.py for later feature
* Replaced API requests with python pip package
* Fixed styling issues
* Updated to new async syntax
Added async_update to sensor class
Added Throttle to SolarEdge data update
Added CONF_NAME to platform settings
Added credentials check for api
Minor code style changes
* Remove unnecessary debug logging
* Updated dict keys
* Added SCAN_INTERVAL
Updated platform setup
* Remove DOMAIN variable
Correct import for PLATFORM_SCHEMA
* Change some debug to error messages
Correct return statements
Remove initial update call
* Fix pylint and flake8 errors
* complete(?)
* fixed linting
* update requirements
* added to coveragerc
* fixed linting
* added ability to set custom name
* fixed linting
* added filter
* spacing
* Added list of possible fuels
* Minor updates
* added gtt sensor
* removed trailing space
* updated requirements_all
* fixed two errors in the code style
* fixed imperative in docstring
* disabled pylint false positive
* fixed description on top of the file
* added files to .coveragerc
* fixes
* linting
* fixed linting 👍
* left a trailing space, now it's gone.
* fix
* Added brottsplatskartan sensor
* Update brottsplatskartan sensor
* Remove redundant configuration checks.
* Set attributes during initialization.
* Setup brottsplatskartan module in setup_platform().
* Just do a simple return, no need for returning false.
* Remove file that was used during testing
* Better variable name and remove excessive newline.
* More updates to brottsplatskartan
* Import uuid at the top of the module.
* Use sensor as domain.
* Don't fire custom events.
* Remove period from logging message.
* Adding validation for area parameter
* Validate empty area configuration
* Fixing indentation.
* Fixing the config schema
* Adding ambient_station.py sensor and updating requirements file
* Cleaning up code and fixing flake8 warnings
* Fixing flake8 and pylint warnings
* Adding ambient_station.py sensor and updating requirements file
* Cleaning up code and fixing flake8 warnings
* Fixing flake8 and pylint warnings
* Fixing bug, things are working well now
* removing nosetests file
* Adding changes as requested in pull request #18551
* Updating with more change requests from PR code review
* Removing SCAN_INTERVAL from PLATFORM_SCHEMA
* Removing unused import
* Adding platform schema validation for monitored_conditions and conf_units
* Updating link to documentation in doc-string. File already named in doc repo
* Only setup platform if component can successfully communicate with API
* Inverting check for platform setup success
* Adding basic Plum Lightpad support - https://plumlife.com/
* Used Const values
is_on is a bool
* Added LightpadPowerMeter Sensor to the plum_lightpad platform
* Moved to async setup, Introduced a PlumManager, events, subscription, Light and Power meter working
* Added PlumMotionSensor
* Added Glow Ring support
* Updated plum library and re-normalized
* set the glow-ring's icon
* Naming the glow ring
* Formatting and linting
* Cleaned up a number of linting issues. Left a number of documentation warnings
* setup_platform migrated to async_setup_platform Plum discovery run as a job
* bumped plumlightpad version
* On shutdown disconnect the telnet session from each plum lightpad
* Cleanup & formatting. Worked on parallell cloud update
* Moved setup from async to non-async
* Utilize async_call_later from the helpers
* Cleanedup and linted, down to documentation & one #TODO
* Remove commented out debug lines
* Fixed Linting issues
* Remove TODO
* Updated comments & fixed Linting issues
* Added plumlightpad to requirements_all.txt
* Fixing imports with isort
* Added components to .coveragerc
* Added PLUM_DATA constant for accessing hass.data[PLUM_DATA]
* used dictionary syntax vs get(...) for config
* Linting needed an additonal line
* Fully async_setup now. removed @callback utilize bus events for detecting new devices found.
* Upgraded to plumlightpad 0.0.10
* Removed extra unused PLATFORM_SCHEMA declarations
* Moved listener attachment to `async_added_to_hass` and removed unused properties & device_state_attributes
* Utilized Discovery when devices were located
* Linting and cleanup
* used `hass.async_create_task` instead of `hass.async_add_job` per Martin
* Removed redundant criteria in if block
* Without discovery info, there is no need to setup
* Better state management and async on/off for Glow Ring
* renamed async_set_config back to set_config, fixed cleanup callback and Plum Initialization
* Fixed flake8 linting issues
* plumlightpad package update
* Add 'motion' device_class to Motion Sensor
* Fixed last known Linting issue
* let homeassistant handle setting the brightness state
* String formatting vs concatenation
* use shared aiohttp session from homeassistant
* Updating to use new formatting style
* looks like @cleanup isn't neccesary
* ditch the serial awaits
* Ensure async_add_entities is only called once per async_setup_platform
* Creating tasks to wait for vs coroutines
* Remove unused white component in the GlowRing
* Used local variables for GlowRing colors & added a setter for the hs_color property to keep the values in sync
* Linted and added docstring
* Update the documentation path to point to the component page
* Removed the extra sensor and binary_sensor platforms as requested. (To be added in later PRs)
* Update plum_lightpad.py
* Update plum_lightpad.py
* Add custom component to core
* Add pyrail to reqs
* Format & lint
* Sort nmbs.py into place on coveragerc
* Only set up station live if provided
* Only set up sensor if config is provided
* Fix line too long linting error
* PR Remarks
* Add docstrings
* Fix hound line to long error
* Fix quotes
* Rebase coveragerc
* PR Review
* Init empty attrs
* Dont include delay if there is none
* PR review
* Safer check
* Rebase reqs
* Generate req
* Update homeassistant/components/sensor/nmbs.py
Co-Authored-By: thibmaek <thibault.maekelbergh@iCloud.com>
* PR remarks
* Feature: support for the HK AVR
* Remove testcode
* Feature: support for the HK AVR
* Remove testcode
* Added checklist
* Review fixes whitespaces
* Lint fixes
* Review fixes, add current source
* Remove unused imports
* Review fixes; State constants, dict[key]
* More review fixes, Unknown state and Sources
* Review fix; rename devices to entities
* event foundation
* implement quirks
* lock zha-quirks version
* allow quirks handling to be toggled on and off
* revert event commit
* disable warning
* update requirements_all
* Remove fix in favor of #19141#19141 should be what ultimately corrects this issue.
* review comment
* move component to a package
* move TelldusLiveEntry to separate file
* refactor
* move entities from a shared container
* using the dispatch helper instead for communication between component and platforms
* updated covereagerc and codeowners
* suggestions from MartinHjelmare
* don't make update async
* "Strip is good!"
* Initial hlk-sw16 relay switch support
* remove entity_id and validate relay id's
* Bump hlk-sw16 library version and cleanup component
* refactor hlk-sw16 switch platform loading
* Use voluptuous to coerce relay id to string
* remove force_update for SW16Switch
* Move to callback based hlk-sw16 relay state changes
* fix hlk-sw16 default port and cleanup some unused variables
* Refactor to allow registration of multiple HLK-SW16 device
* Store protocol in instance variable instead of class variable
* remove is_connected
* flake8 style fix
* Move reconnect logic into HLK-SW16 client library
* Cleanup and improve logging
* Load hlk-sw16 platform entities at same time per device
* scope SIGNAL_AVAILABILITY to device_id
* Fixes for connection resume
* move device_client out of switches loop
* Add timeout for commands and keep alive
* remove unused variables
* Added lightwave components for switches and lights.
* Address warnings raised by Hound
* Correcting lint messages and major typo. This time tested before commit.
* Trying to fix author
* Minor lint changes
* Attempt to correct other lint error.
* Another lint attempt.
* More lint issues.
* Last two lint errors! Hurrah.
* Changes after review from fabaff.
* Moved device dependent code to PyPi.
* Replaced DEPENDENCIES with REQUIREMENTS
* Updated following code review from Martin Hjelmare.
* Added lightwave to requirements_all.txt
* Omit lightwave from tests.
* Updated requirements_all.txt
* Refactored how lightwave lights and switches load.
* Removed imports that were no longer required.
* Add guard for no discovery_info.
* Make it a guard clause and save indentation. Rename LRFxxx to LWRFxxx.
* Sorted imports to match style guidelines.
* Correct return value.
* Update requirements_all.txt
* Catch case where we have no lights or switches configured.
* Improve configuration validation.
* Initial stuff
* More work in place
* Starting with tests
* Device registry in place
* Hound
* Linting
* Member comments (including extracting device registry)
* Member comments (plus I forgot cleanup!)
* Hound
* More Hound
* Removed old import
* Adding config entry test to coverage
* Updated strings
* Fibaro HC connection, initial commit
Very first steps working, connects, fetches devices, represents sensors, binary_sensors and lights towards HA.
* Cover, switch, bugfixes
Initial support for covers
Initial support for switches
Bugfixes
* Some cleanup and improved lights
pylint based cleanup
light switches handled properly
light features reported correctly
* Added status updates and actions
Lights, Blinds, Switches are mostly working now
* Code cleanup, fiblary3 req
Fiblary3 is now in pypi, set it as req
Cleanup based on pylint
* Included in .coveragerc and added how to use guide
Included the fibaro component in coveragerc
Added usage instructions to file header
* PyLint inspired fixes
Fixed pylint warnings
* PyLint inspired fixes
PyLint inspired fixes
* updated to fiblary3 0.1.5
* Minor fixes to finally pass pull req
Fixed fiblary3 to work with python 3.5
Updated fiblary3 to 0.1.6
(added energy and batteryLevel dummies)
* module import and flake8 fixes
Finally (hopefully) figured out what lint is complaining about
* Fixed color support for lights, simplified callback
Fixed color support for lights
Simplified callback for updates
Uses updated fiblary3 for color light handling
* Lean and mean refactor
While waiting for a brave reviewer, I've been making the code smaller and easier to understand.
* Minor fixes to please HoundCI
* Removed unused component
Scenes are not implemented yet
* Nicer comments.
* DEVICE_CLASS, ignore plugins, improved mapping
Added support for device class and icons in sensors and binary_sensors
Improved mapping of sensors and added heuristic matching
Added support for hidden devices
Fixed conversion to float in sensors
* Fixed dimming
Fibaro apparently does not need, nor like the extra turnOn commands for dimmers
* flake8
* Cleanup, Light fixes, switch power
Cleanup of the component to separate init from connect, handle connection error better
Improved light handling, especially for RGBW strips and working around Fibaro quirks
Added energy and power reporting to switches
* Missing comment added
Missing comment added to please flake8
* Removed everything but bin.sensors
Stripdown, hoping for a review
* better aligned comments
OMG
* Fixes based on code review
Fixes based on code review
* Implemented stopping
Implemented stopping of StateHandler thread
Cleanup for clarity
* Minor fix
Removed unnecessary list copying
* Nicer wording on shutdown
* Minor changes based on code review
* minor fixes based on code review
* removed extra line break
* Add srp_energy
* Update message on TypeError. Add check for None state.
* Add check for none in history
* Add srpenergy to Test requirements.
* Add srpenergy to requirments.
* Change = to ==.
* Change import for srpenergy
* Fix Flak8 errors
* Add srp to gen requirements script
* Change config name.
* Add daily usage test
* Add test for daily usage.
* Fix Flake8 message.
* Remove blank after docstring.
* Add srpenergy to coverage
* Bump requires version to srpenergy
* Fix type in coverage. Import from Sensor. Use dict.
* Update to 1.0.5. Check credentials on setup. Standalone test.
* Fix formating.
* Remove period. Rename _ variables.
* Fix rebase merge
* Add rebase requirement
* Improve Mock Patching.
* Initial commit of w800rf32 component and binary_sensor.
The W800 family is an X10 RF receiver used with keypads and motion sensors etc.
* Initial commit of w800rf32 switch platform.
The W800 family is an X10 RF receiver used with keypads and motion sensors etc.
* Remove unused code.
* Additions for w800rf32 component and platform code
* Fix w800rf32 minor lint issues and make sure gen_requirements.py correctlly adds w800rf32
* Added dispatch_connect/send and refactor somewhat
* Fix missed indentation lint
* Removed shared entity dict and use async_dispatch code
* Fix long line not caught by lint
* One more line too long, missed it
* Remove unused code and changes for async
* Remove @callback that shouldn't be there.
* Remove switch platform, can't have read only switch.
* Remove unused CONF_DEBUG
* Remove used vars and make CONF_DEVICES required
* Move CONF_OFF_DELAY to platform, only used there
* Add new launch sensor to keep track of space launches.
* Added attribution to Launch Library.
* Adds data class and throtle, reuse aiohttp session.
* Add one extra blank line before the new class..
* Change throttle to simpler SCAN_INTERVAL.
* Remove the usage of the LaunchData class.
* Bump pylaunches, remove . from log, fix line breaker for agency_country_code, remove CONF_ from ATTRIBUTION.
* Adds support for Lupusec alarm control panel
* fixed various mostly cosmetic issues
* fixed generic type of binary sensors
* fixed some formatting; removed scan interval completely -> defaults now to 2 secs
* removed unused data caches; added check if binary sensor class exists
* cosmetics
* generic type fix
* small fix
* small fixes
* guard clause added
* small fixes
* Add Norwegian Public Transportation sensor (Ruter).
* Corrected typo.
* change stopid to stop_id, actually use attributes, changed logging, corrected link, removed unused variable.
* Change to RuterSensor for the class, and move logic to me more readable.
* Use correct sensor class.
* Add return if blank list, remove else
* Add support for Google Home device tracking.
* Use dict[key] for options.
* Delete googlehome.py.save
* Change stylling of name, and attr mac_address to btle_mac_address, removed unesssesarry attributes copying.
* Implemented tplink_lte components and notify service
* Device discovery for the notify component
* Improved the config schema. Small fixes
* Improved login retry mechanism
* Log successful connection only on retries
* Removed CancelledError handlers and small fixes
* Adds Tautulli as a sensor platform.
* Remove blank last line.
* Rewrite the platform to comply with review.
* Linting issues.
* Remove tailing newline.
* Corrected typo
* Correcte check_connection, removed wierd defaults, added line in imports, removed unused var, use the correct user list.
* Use dict[key] for required config options.
* Minor changes
* initial tensorflow image_processing component
* linting fixes
* make displayed attribute a summary of objects
* fix missed merge conflict and add warning supression back in for CPU type
* restructure tensorflow component to install on the fly, remove from Docker
* add both matches and summary as attributes
* address review comments
* do not use deps folder as default, as it should only be managed by HA. Update to have tensorflow in root config directory
* Added error handling for sense API timeouts
* Moved imports in function
* Moved imports to more appropriate function
* Change exception to custom package version
* Updated sense_energy library to 0.4.2
* Added binary sensors for individual devices
* Whitespace updates
* Split into component, sensors, binary sensors
* Fixed whitespace
* Fixed whitespace
* Moved time constant into sensor file
* Regenerated requirements
* Fixed whitespace
* Updated component dependency
* Fixed whitespace
* Code cleanup
* High and low target temps are also supported if target is supported
* Revert "High and low target temps are also supported if target is supported"
This reverts commit 66b33dc2b8.
* Added all sense components to .coveragerc
* Added check authentication exception
* binary/sensor platforms loaded in setup
* Changed to add all detected devices
* Changed to add all sensors on setup
* Code cleanup
* Whitespace
* Whitespace
* Added sense as requirement for platform
* pylint fixes
* Whitespace
* Switched requirement to dependency
* Made non-class function
* Whitespace
* Removed unneeded checks
* Increased API delay to 60 seconds
* Added guard clause for discovery_info
* Tidy code
* Whitespace
* Add a component for GreenEye Monitor
[GreenEye Monitor](http://www.brultech.com/greeneye/) is an energy
monitor that can monitor emergy usage of individual circuits, count pulses
from things like water or gas meters, and monitor temperatures. This component
exposes these various sensors in Home Assistant, for both data tracking and
automation triggering purposes.
* Consolidate sensors
* lint
* .coveragerc
* - cv.ensure_list
- DOMAIN, where appropriate
- defaults to schema
- single invocation of async_load_platform
- async_create_task instead of async_add_job
- fail if no sensors
- monitors required
- async_add_entities
- call add_devices once
- remove unused schema
- use properties rather than set fields
- move _number and unique_id to GEMSensor
- remove unnecessary get(xxx, None)
- keep params on one line when possible
- new-style string format
* Fix `ensure_list` usage, log message
* Pass config through
* Move components/opentherm_gw.py to components/opentherm_gw/__init__.py
* Update requirements-all.txt
* Await set_clock coroutine rather than scheduling it.
* Create task for async_load_platform
* Fix Vera climate component to use correct states
Changed the Vera climate component so it uses the STATE_* states from the base climate component. This will allow it to work with Google Assistant.
* Wemo Humidifier - Initial Commit
* WeMo Humidifier - First draft of component
* WeMo Humidifier - Removed direct IO from property
* WeMo Humidifier - Trivial comment change
* Added myself as codeowner for WeMo
* WeMo Humidifier - Fixed various syntax & lint issue
* WeMo Humidifier - Small comment addition
* WeMo Humidifier - Fix TypeError: 'WemoHumidifier' object is not iterable
* WeMo Humidifier - Rename set humidity service
* WeMo Humidifier - Add to .coveragerc
* WeMo Humidifier - Fixed lint/pylint issues
* WeMo Humidifier - First round of requested changes
* WeMo Humidifier - Round two of requested changes
* WeMo Humidifier - Third round of requested changes
* WeMo Humidifier - Fixed whitespace issue on dict comprehension
* WeMo Humidifier - Fourth round of requested changes
* WeMo Humidifier - Corrected typo in async_add_executor_job call
* WeMo Humidifier - Fixed spacing before inline comments
* 🌧 Meteo France rain forecast
* do not fail on wrong config
* Update name of sensor class
* do not show sensor if not working
* Update .coveragerc
* ability to submit insee location code without final 0 needed by meteo-france
* Lynting
* more lynting
* update comment
* block comment linting
* reducing length of long lines
* linting
* Update météo-france platform
Now work with pypi package and monitored conditions
* remove error log
* Update requirements_all.txt
* Increase scan interval to 5 minutes
* Update meteo_france according to review
* better error handling of location missing some monitored conditions
* fix lint error
* moving error log
Errors are now catched at sensor initialization and state is set when updating the data
* Update updating of sensor
* Switch mailgun to use webhook api
* Generalize webhook_config_entry_flow
* Add tests for webhook_config_entry_flow
* Add tests for mailgun
* Remove old mailgun file from .coveragerc
* Refactor WebhookFlowHandler into config_entry_flow
* Remove test of helper func from IFTTT
* Lint
* New rtorrent sensor
* Fix lint issue
* Fix another lint issue
* Fix pylint issue
* how many python linters do you guys use
* Cleanup code
* python linting
* newline
* Add OpenTherm Gateway sensor platform.
* Add OTGW_ variables to list of supported sensors.
* Order imports.
* Add OpenTherm Gateway binary sensor support.
* Revert "Add OpenTherm Gateway binary sensor support."
This reverts commit 115acaa912.
* Import COMP_SENSOR from sensor component rather than defining it.
* Update opentherm_gw sensor platform docs url.
* Update dependency to v0.2b1
Old version had incorrect variable names for some of the sensors
* Update requirements_all.txt
* Address review findings.
* Update .coveragerc
* Add LG soundbar support
We can autodiscover these, so for now let's skip any local configuration.
Currently we expose volume, source and equaliser preset - we can expose the
other volume controls and options as well if necessary, but I don't know
whether it's worth it.
* Add discovery of LG devices
This is a generic discovery type that doesn't obviously contain enough
information to identify whether we're talking to a speaker system or any
other kind of device - on the other hand I haven't been able to find any
other LG devices that respond like this, so we can cross that bridge when
we get to it.
* Lint
* Add notify.homematic_signalgen
* Update homematic_signalgen.py, test_homematic_signalgen.py
* Added new files to .coveragerc
* Fixed review comments from houndci-bot
* Fixed pylint errors
* Regenerate requirements_test_all.txt by script/gen_requirements_all.py
* Fix flake8 warnings
* Renamed notify.homematic_signalgen to notify.homematic and made it generic
* Update .coveragerc and requirements_test_all.txt
* Removed the terms signal generator from the sources.
* Add support for monitoring the temperature of a thermoworks smoke thermometer.
* Use string formatting.
* Add line break.
* Add error handling for authentication.
* Fix linting errors.
* Fix quotes.
* Bump thermoworks_smoke library version.
* Review changes for @MartinHjelmare
* Add unique id attribute and change battery attribute to the standard "battery_level".
* requested changes to snake case and monitored conditions
* fix lint error
* exclude firmware from state attrs. rename original_unit to unit_of_min_max so it's more clear what it is for.
* add device_info
* add regex validator for exclude
* undo device info stuff
* remove serial number from attributes even though other components are allowed to have it...
* exclude firmware
* YesssSMS handling more errors, upgrade to version 0.2.1
- handling missing internet connection nicely
- disabling login with non-working credentials (website locked account for 1 hour)
- upgrade to new upstream version of YesssSMS
* notify.yessssms tests
* test requirements
* flake8 fix
* fixing tests, new upstream version 0.2.3
fixing tests based on requested changes, coverage
* removing unmotivated print
* passing exception to ConnectionError and SMSSendingError logger
* Using new methods for blink camera
- Refactored blink platform (breaking change)
- Camera needs to be uniquely enabled in config from now on
- Added motion detection enable/disable to camera platform
* Fix motion detection
- bumped blinkpy to 0.8.1
- Added wifi strength sensor
* Added platform schema to sensor
- Added global variables for brand and attribution to main platform
* Removed blink binary sensor
* Add alarm control panel
* Fixed dependency, added alarm_home
* Update requirements
* Fix lint errors
* Updated throttle times
* Add trigger_camera service (replaced snap_picture)
* Add refresh after camera trigger
* Update blinkpy version
* Wait for valid camera response before returning image
- Motion detection now working!
* Updated for new blinkpy 0.9.0
* Add refresh control and other fixes for new blinkpy release
* Add save video service
* Pushing to force bot to update
* Changed based on first review
- Pass blink as BLINK_DATA instead of DOMAIN
- Remove alarm_arm_home from alarm_control_panel
- Re-add discovery with schema for sensors/binar_sensors
- Change motion_detected to a binary_sensor
- Added camera_armed binary sensor
- Update camera device_state_attributes rather than state_attributes
* Moved blink.py to own folder. Added service hints.
* Updated coveragerc to reflect previous change
* Register services with DOMAIN
- Change device add for loop order in binary_sensor
* Fix lint error
* services.async_register -> services.register
* Add support for Honeywell evohome CH/DHW systems
More flake8 corrections
Passes Flake8 tests
Almost passed flake8.pylint!
Passed all tox tests
Now it needs serious testing!
Almost ready to submit
BUGFIX: DHW state now functional
More improvements to available()
Solved the DHW temp units problem!
Last minute bug squash
to improve dicts merge
Trying to rebase
fixing more rbase errors
revert to creating HTTP_error_code internally for now
ready to submit PR
Added support for Honeywell evohome CH/DHW systems
* Updated requirements_test_all.txt
* Fix: D401 First line should be in imperative mood
* Remove _LOGGER.info (replace with _LOGGER.debug)
* raise PlatformNotReady when RequestException during setup()
* Revert some LOGGER.debug to LOGGER.warning
* Improved logging levels, and removed some unwanted comments
* Improvments to logging - additional self._status info
* BUGFIX: DHW wrongly showing available = False (and some other tweaks)
* Fix trailing whitespace
* Remove state_attributes override and API_VER code
* Removed heating zones, DHW and heuristics to reduce # lines of code
* Removed some more lines of code
* Removed unused configuration parameters
* Remove some more un-needed lines
* Removed more (uneeded) lines of code & fixed two minor typos
* Improvements to debug logging of available() = False
* Improvements to code, and code clean-up
* Corrected a minor typo
* A small tidy up
* reduces precision of emulated temps floats to 0.1
* Some code improvements as suggested by JeardM
* Rewrite of exception handler
* Removed another unwanted logging in properties
* Remove async_ version of various methods
* moved available heuristics to update()
* Cleanup of code, and re-work linter hints
* fixed a minor documentation typo
* scan_interval is now no longer a configurable option
* Change from Master/Slave to Parent/Child
* Removed the last of the slaves
* Removed the last of the masters
* Move -PARALLEL_UPDATES to .\climate\evohome.py'
* main code moved to climate/evohome.py
* merge EvoEntity into EvoController class
* remove should_poll (for now)
* woops! left a hint in
* removed icon
* only log a WARNING the first time available = False
* cleanup dodgy exception handling
* Tidy up exception handling
* Many changes as suggested by @MartinHjelmare, thanks
* remove hass from init, part 1
* use async_added_to_hass instead of dispatcher_connect
* remove hass from init, part 2 (done)
* add 1-2 arrays, and tidied up some comments
* from dispatcher to async_added_to_hass
* cleaned up some logging, and removed others
* Many changes as request by @MartinHjelmare
* Homage to the lint
* Changed to the HA of doing operating_mode
* Now using update_before_add=True
* reduced logging further still...
* fixed minor lint
* fix a small logic error
* Add device_state_attributes to track actual operating mode
* Clean up doc quotes caused by previous changes
* Woops! removed some debug lines that shoudln't have stayed in
* Add a complete set of device_state_attributes
* Cleanup some constants
* Remove more legacy code
* domain_data to evo_data & this else should be a finally
* minor change for readability
* Minor change for readability #2
* removed unused code
* small tidy up - no code changes
* fix minor lint
* Correct URLs & descriptions in docstring
* whoops - fixed a typo in docstrings
* remove an unused line of cide & a small tidy-up
* Updates to GitLab Sensor
* Updates to GitLab_CI sensor.
* Added GitLab_CI sensor.
* Updated interval to a more appropriate 300 seconds.
* Added GitLab_CI.py to ommitted files.
* Initial refactor to use python-gitlab PyPI module.
* Fixes to dict parsing.
* Updated required packages for GitLab_CI requirements.
* Updates and refactoring to more closely align with Home-Assistant standards.
* Moved import to init, removed unreachable requests exception.
* Removed references to STATE_UNKNOWN and replaced with None
* Removed extra whitespace
* Changed PLATFORM_SCHEMA and renamed add_devices.
Changed PLATFORM_SCHEMA to use SCAN_INTERVAL and add_devices to add_entities
* Added configurable name, changed logger and removed cruft.
* Removed _status to use _state instead, as both held same value.
* Fixed ATTR_BUILD_BRANCH, removed more extraneous cruft.
* Changed required config keys to dict[key] format.
* Removed extraneous CONF_SCAN_INTERVAL as it's already defined.
* Added Logi Circle platform, camera and sensor
* Integrated with Logo Circle API’s feature detection to exclude sensors not supported by device. Added services for recording livestream and taking a snapshot from the livestream.
* Migrated livestream snapshot and recording functionality out of home assistant components and into the logi circle API wrapper. Added services.yaml entries for logi services.
* Added new Logi sensor types, updated to latest version of `logi_circle` and tidy up in preparation for pull request.
- Renamed `logi_set_mode` to `logi_set_config`.
- Live stream recording and snapshot methods now respect whitelisted path configuration.
- Added `streaming_mode` and `speaker_volume` sensors.
- Moved model-specific turn on/off logic to `logi_circle` library.
* Renamed `logi` component domain to `logi_circle`.
* Updates based on PR feedback
* Added timeout of 15s to logi_circle initial setup requests (login and grabbing cameras).
* Added unique ID (uses MAC address for camera platform, MAC address + sensor type for sensor platform).
* Added battery level and battery charging attributes to camera.
* Removed static attributes from device_state_attributes.
* Replaced STATE_UNKNOWN with None, replaced ‘on’ & ‘off’ with STATE_ON and STATE_OFF.
* Removed redundant SCAN_INTERVAL in sensor, removed redundant hass param from async_setup_platform in camera and sensor.
* Style tweaks.
* Replaced `asyncio.wait_for` with `async_timeout` to be consistent with other components.
* Add met.no weather component
* requirements .coveragerx
* use lib
* style
* style
* renam function to _fetch_data
* Only update once per hour
* style
* add 'default_conversations' parameter
* remove the empty message segment at the end of every message
* add 'HangoutsHelp' intent
* add hangouts/intents.py
* Initial OpenTherm Gateway support.
* Fix coveragerc and requirements_all*.txt
Overall cleanup and polishing
* Make hound/flake/travis happy
* Basic improvements to comply with Home Assistant's style guidelines
Changed wording from "component" to more appropriate terms where necessary
Fixed small mistakes that snuck in during testing and/or due to my own ignorance ;)
* Fixed overwriting state property
* Fixed a bug with ROOM_SETPOINT_OVRD
Updated dependency pyotgw to latest version
* Remove unit_of_measurement from OpenThermGateway class
* Cleanup after previous commits
* Moved initialisation and configuration from async_setup_platform to async_added_to_hass
* Make travis happy
* Disable polling for this platform
Improve update flow
* Small improvements/optimisations
* Add Smart Alarm Component
* Lint fixes
* Update coverage
* Update coverage with the correct file name
* PR Fixes. Update client version (to include timeouts). Cleaned up clien tcreation and improved authentication failure error. Added state map to replace nasty if blocks.
* PR Fixes. Update client version (to include timeouts). Cleaned up clien tcreation and improved authentication failure error. Added state map to replace nasty if blocks.
* Remove test file added in error.
* PR Fixes
* Added support for Habitica
Second refactoring
Moved all config to component.
Sensors are autodiscovered.
Signed-off-by: delphi <cpp.create@gmail.com>
* Apply requested changes
Signed-off-by: delphi <cpp.create@gmail.com>
* Made event fire async. Made `sensors` config implicit and opt-out-style.
Signed-off-by: delphi <cpp.create@gmail.com>
* Removed unneeded check and await.
Signed-off-by: delphi <cpp.create@gmail.com>
* Moved into separate component package and added service.yaml
Signed-off-by: delphi <cpp.create@gmail.com>
* Fix coveralls
Signed-off-by: delphi <cpp.create@gmail.com>
* add a component for hangouts
* add a notify component for hangouts
* add an extra message as title
* add support to listen to all conversations hangouts has
* move hangouts to package and add parameter documentation
* update .coveragerc and requirements_all.txt
* makes linter happy again
* bugfix
* add conversations parameter to command words
* Move the resolution of conversation names to conversations in own a function
* typo
* rename group of exclusion form 'id' to 'id or name'
* refactoring and use config_flow
* makes linter happy again
* remove unused imports
* fix not working regex commands
* fix translations
* cleanup
* remove step_init
* remove logging entry
* clean up events
* move constant
* remove unsed import
* add new files to .converagerc
* isort imports
* add hangouts_utils to ignored packages
* upadte doc and format
* fix I/O not in executor jon
* rename SERVICE_UPDATE_USERS_AND_CONVERSATIONS to SERVICE_UPDATE
* move EVENT_HANGOUTS_{CONNECTED,DISCONNECTED} to dispatcher
* add config flow tests
* Update tox.ini
* Adding noaa-tides changes to new branch.
* Fix typo in .coverageac
* Incorporate @MartinHjelmare and @fabaff changes.
* Disable pylint error and add error message for unavailable station.
* Two spaces before inline comments
* Increment py_noaa version to 0.3.0
* Updated requirements.py
* Minor changes
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Add host to config options
* Add username and password to config for hub connectivity
* Add username and password to config for hub
* Convert port to int if host is defined
* Add KeypadLinc
* Update config schema to require either port or host
* Solidify Hub and PLM configuration to ensure proper settings
* Update hub schema
* Bump insteonplm version
* Fix pylint and flake issues
* Bump insteonplm to 0.12.1
* Merge insteon_plm and insteon_local to insteon
* Rename insteon_plm to insteon
* Bump insteonplm to 0.12.2
* Flake8 cleanup
* Update .coveragerc for insteon_plm, insteon_local and insteon changes
* Add persistent notification
* Fix reference to insteon_plm
* Fix indentation
* Shorten message and fix grammer
* Add comment to remove in release 0.90
* Hound fix
* Ecovacs Deebot vacuums
* All core features implemented
Getting fan speed and locating the vac are still unsupported until sucks adds support
* Move init queries to the added_to_hass method
* Adding support for subscribing to events from the sucks library
This support does not exist in sucks yet; this commit serves as a sort of TDD approach of what such support COULD look like.
* Add OverloadUT as ecovacs code owner
* Full support for Ecovacs vacuums (Deebot)
* Add requirements
* Linting fixes
* Make API Device ID random on each boot
* Fix unique ID
Never worked before, as it should have been looking for a key, not an attribute
* Fix random string generation to work in Python 3.5 (thanks, Travis!)
* Add new files to .coveragerc
* Code review changes
(Will require a sucks version bump in a coming commit; waiting for it to release)
* Bump sucks to 0.9.1 now that it has released
* Update requirements_all.txt as well
* Bump sucks version to fix lifespan value errors
* Revert to sucks 0.9.1 and include a fix for a bug in that release
Sucks is being slow to release currently, so doing this so we can get a version out the door.
* Switch state_attributes to device_state_attributes
* Add a sensor for netatmo public data
* A bit of cleanup before submitting pull request
* Add netatmo_public file to .coveragerc, as per pull request template instructions
* Fixes for tox complaining
* make calculations simpler, based on review feedback
* explicitly pass required_data parameter to netatmo API
* remove unnecessary spaces
* remove debug code
* code style fix
* add pjlink media player component
* retrieve pjlink device name from projector if name isn't specified in configuration
* update .coveragerc
* fix style
* add missing docstrings
* address PR comments from @MartinHjelmare
* fix code style
* use snake case string for source names
* add missing period at the end of comment string
* rewrite method as function
* revert to use source name provided by projector
* Add media_player.dlna_dmr component
* PEP 492
* Move DIDL-template up
* Remove max_volume-override option
* Remove picky_device support
* Use DEFAULT_NAME
* Make supported_features static
* Remove unneeded argument
* Proper module-docstring
* Add http dependency
* Remove additional_configuration options, no longer used
* Change default name to 'DLNA Digital Media Renderer'
* Use python-didl-lite for DIDL-Lite-xml construction/parsing
* Handle NOT_IMPLEMENTED for UPnP state variables RelativeTimePosition and CurrentMediaDuration
* Use UPnP-UDN for unique_id
* Proper handling of upnp events
* Keeping flake8 happy
* Update requirements_all.txt
* Make UDN optional
* Ensure NotifyView is started, before using it
* Only subscribe to services we're interested in
* Don't update state_variables if value has not been changed + minor refactoring
* Improve play_media, follow flow of DLNA more closely
* Hopefully fix ClientOSError problems
* Flake8 fixes
* Keep pylint happy
* Catch errors and report gracefully
* Update async_upnp_client to 0.11.0
* Don't be so noisy
* Define/use constants for HTTP status codes
* Add discovery entry for dlna_dmr
* More robustness with regard to state variable not being set (yet)
* Keep privates hidden
* Handle NOT_IMPLEMENTED for CurrentTrackMetaData state variable
* Fixes in async_upnp_client + renew UPnP subscriptions regularly
* Not too eager
* Refactor duplicate code to _current_transport_actions and improve parsing of actions
* Support RC:1 to RC:3 and AVT:1 to AVT:3
* Moved DLNA-specifics to async_upnp_client.dlna.DmrDevice
* Use our own HTTP server to listen for events.
* More clear and explicit log message for easier troubleshooting
* Follow changes by hass, fixes traceback
* Fix not being able to do next
* Changes after review by @MartinHjelmare
* Linting
* Use homeassistant.util.get_local_ip
* Moved upnp event handling to async_upnp_client
* Keeping pylint happy
* Changes after review by @MartinHjelmare
* add enphase envoy component
* Add Enphase Envoy component for energy monitoring
* Fix formatting problems
* Fix formatting errors
* Fix formatting errors
* Fix formatting errors
* Change unit of measurement to W or Wh. Return sensor states as integers
* Fix formatting errors
* Fix formatting errors
* Fix formatting errors
* Move import json to update function
* Fix formatting. Add file to .coveragerc
* Add new component to requirements_all.txt
* Move API call to third party library on PyPi
* Refactor
* Run gen_requirements_all.py
* Minor refactor
* Fix indentation
* Fix indentation
* Add Genie Aladdin Connect cover component
* Fix lines being too long
* Fix issues found in review
* remove Unknown state, use None instead
* Fixed requirements_all
* Add a component for Sisyphus Kinetic Art Tables
The [Sisyphus Kinetic Art Table](https://sisyphus-industries.com/) uses a
steel ball to draw intricate patterns in sand, thrown into sharp relief by a
ring of LED lights around the outside.
This component enables basic control of these tables through Home Assistant.
* Fix lints
* Docstrings, other lints
* More lints
* Yet more.
* Feedback
* Lint
* Missed one piece of feedback
* - Use async_added_to_hass in media player
- async_schedule_update_ha_state in listeners
- constants for supported features
- subscripting for required keys
- asyncio.wait
- update to sisyphus-control with passed-in session
* Update requirements
* lint
* Added support for FutureNow light platform and relay/dimmer units
* Pinned specific version for requirement
* Added support for FutureNow light platform and relay/dimmer units
* Added futurenow.py to .coveragerc.
* Minor fixes and enhancements as requested in the code review.
* Minor fixes and enhancements as requested in the code review.
* Use device_config's value directly as it's validated as boolean.
* Simplify state check.
* Fixed brightness update that was broken in previous commit.
* add spider thermostats
* Added load_platform. Added operation dictionary. Minor improvements
* loop over spider components for load_platform
* added empty dict to load_platform. changed add_devices
* moved logic to the API
* fix requirements_all.txt
* minor code improvements
* support for tuya platform
* support tuya platform
* lint fix
* change dependency
* add tuya platform support
* remove tuya platform except switch. fix code as required
* fix the code as review required
* fix as required
* fix a mistake
* Add Cloudflare DNS component
* Removed man
* Update .coveragerc
* Update cloudflare.py
* Update cloudflare.py
* Changed records to be required
* Fix typos, update order and other minor changes
* Added support for Duke Energy smart meters
* Fixed hound
* Added function docstring
* Moved strings to constants, implemented unique_id, and cleaned up setup.
* Added doc string.
* Fixed review issues.
* Updated pydukenergy to 0.0.6 and set update interval to 2 hours
* Updated requirements_all
* Added support for Xiaofang Camera
* Added entry for Xiaofang 1080p camera
* Code fix
* Minor comment fix
* Updated coveragerc for Xiaomi cameras
* Added Xiaomi Camera
Added Xiaomi Camera to accommodate multiple models like Yi, Xiaofang, etc.
* Minor code fix
* Minor code fix
* Added model property
* Update xiaomi.py
* Minor code fix
* Update xiaomi.py
* Update xiaomi.py
* Minor code fix
* Package requirement fix due to Version conflict
* To fix conflicts
* Update package_constraints.txt
* Minor fix
* Update xiaomi.py
* Update xiaomi.py
Changes made per comment
* Update xiaomi.py
* Don't update on add.
* first blood for ZhongHong HVAC Controller
* add requirements
* requirements_all.txt updated
* add zhong_hong.py to coveragerc
* add comments
* unique_id add platform name
* zhong_hong_hvac version bump to 1.0.1
* improve some coding style to match the project standard
* zhong_hong_hvac version bump to 1.0.4
* zhong_hong_hvac version require 1.0.7
* update requirements by script/gen_requirements_all.py
* zhong_hong_hvac version bump to 1.0.8
* fix startup problem
* remove unused import
* zhong_hong_hvac version bump to 1.0.9
- operation_mode: cold -> cool
* start hub listen event when all climate entities is ready
* use dispatcher to setup hub
* var name change
SIGNAL_DEVICE_SETTED_UP -> SIGNAL_DEVICE_ADDED
* async problem fix
* bugfix: set_operation_mode forget to use upper case
* stringify the exception instead of print full stack of traceback
* avoid to call str(exception) explicity
* remove unnecessary try...except clause
* remove unused import
* Epson projector support. Version based on external library
* Epson projector support. Version based on external library
* modified epson according to MartinHjelmare review.
Added description of cmode to services.yaml
* renamed EPSON_SCHEMA to epson_schema
* removed method of getting cmode property
* removed unnecessary checks
change name of cmode service
* renamed SERVICE_ATTR_CMODE to SERVICE_SELECT_CMODE
* initial commit for kiwi door locks
bugfixes
improved attribute display
flake8
more style adjustments
* added session handling
flake8
* added requirements_all
reordered imports and flake8
attempt to pelase a very picky linter
also pleasing pylint now :)
* re-try the build
* added kiwi.py to .coveragerc
* reorganized datetime handling and attribute naming
* created pypi package for door lock library
* updated requirements_all.txt
* code review changes
* added async lock state reset for locking state
* refactored lat/lon attribute updates
* initial locked state changed from undefined to locked
* refactored is_locked property check
* handling authentication exception in setup_platform
* added more check in setup_platform
* code review changes: return type in setup_platform
* fixed logging issue
* event handling in main thread
* updated kiwiki-client to version 0.1.1
* renamed alias e to exc
* added new platform for the Unitymedia Horizon HD Recorder
* improve connection handling of the horizon platform
* remove unneeded parameters and fix spelling in the horizon platform
* abort or raise exception if connection to the device could not be established
* remove channel/source list and SELECT_SOURCE feature
* remove useless type check after cast and use a try block instead
* abort or raise exception if reconnect to device fails
* remove protocol specific code and restructure sending logic accordingly
* fix indentation to be pep8 complaint
* remove unused methods/properties
* fix unnecessary pylint commands and use a return to abert outside of setup_platform
* directly access config values
* Added Uptime Robot sensor
* added newline at the end and corrected doclink
* Added changes form @cdce8p
* Convert to binary_sensor
* updated requirements
* moved to correct dir
* Update uptimerobot.py
* Initial version of wirelesstags platform support.
* Pinned wirelesstagpy, generated requirements_all.
* Fixed temperature units in imperial units systems, make binary events more tags specific.
* Lowercased tag name during entity_id generation.
* Fixed: tag_id template for tag_binary_events, support of light sensor for homebridge.
* Minor style cleanup.
* Removed state, define_name, icon. Reworked async arm/disarm update. Removed static attrs. Introduced available property. Custom events contains components name now. Cleaned dedundant items from schema definition.
* Removed comment and beep duration from attributes. Minor cleanup of documentation comment.
* Ignoring Wemo switches linked in iOS app.
* Reworked passing data from platform to components using signals.
This commit adds a new history component for the IBM Watson IoT
Platform. The IBM Watson IoT Platform allows for tracking of devices
and analytics on top of the device data. This new component allows
users to have home assistant automatically populate a watson iot
platform board with device data from devices managed by home assistant.
* Add a device tracker for Freebox routers
* Automatic setup of Freebox device tracker based on discovery
* Make the Freebox device tracker asynchronous
* Starting to add attributes
* All attributes added to programs
* Basic zone attributes in place
* Added advanced properties for zones
* We shouldn't calculate the MAC with every entity
* Small fixes
* Basic framework for push in play
* I THINK IT'S WORKING
* Some state cleanup
* Restart
* Restart part 2
* Added stub for service schema
* Update
* Added services
* Small service description update
* Lint
* Updated CODEOWNERS
* Moving to async methods
* Fixed coverage test
* Lint
* Removed unnecessary hass reference
* Lint
* Lint
* Round 1 of Owner-requested changes
* Round 2 of Owner-requested changes
* Round 3 of Owner-requested changes
* Round 4 (final for now) of Owner-requested changes
* Hound
* Updated package requirements
* Lint
* Collaborator-requested changes
* Collaborator-requested changes
* More small tweaks
* One more small tweak
* Bumping Travis and Coveralls
* Added the Hydrawise component.
* Fixed lint errors.
* Multiple changes due to review comments addressed.
* Simplified boolean test. Passes pylint.
* Need hydrawiser package version 0.1.1.
* Added a docstring to the device_class method.
* Addressed all review comments from MartinHjelmare.
* Changed keys to single quote. Removed unnecessary duplicate method.
* Removed unused imports.
* Changed state to lowercase snakecase.
* Changes & fixes from review comments.
* Added platform lw12wifi for Lagute LW-12 Wifi Lights
Supported features:
* RGB colors
* Variable brightness
* 29 effects
* Changing transitions speed for animated effects
* Added lw12wifi to the list of omitted files to test
* Added lw12 module as new requirement for lw12wifi platform
* Added configuration example docstring for platform lw12wifi
* Updating code according to review in PR:
* Removed unused imports: enum, socket.
* Unused and not imported feature SUPPORT_FLASH was removed.
* Unused import lw12 in setup_platform method removed.
* Fixed indention for valuptuous.
* Changed check if effect is None.
* Removed personal debug output.
* Blocking function are not async anymore.
* Further improvements to satisfy PR.
* Unused import asyncio removed.
* Fixed: Return value and docstring no match up for `assumed_state`.
* Check if the set effect is supported, otherwise revert to normal light.
* Added describing missing docstrings to all functions.
* Adopted code to work with HS color setting.
* Syntactical change in comment.
* Removed redefinition of DOMAIN.
* Refactored lw12 controller setup: removed requirement for host and port in LW12Wifi class.
* Rewritten supported feature setup to a more static expression.
* Removed unused rgb_color property
* Fixed typo in comment for set_light_option
* Changed RGB option validation schema
* Removed instance properties as config options
* Removed optional settings to be more inline with code style.
* Removed unused option from config example
* Removal of unused import
* Added property to disable state polling for this entity.
* Raise an exception if an unknown effect was selected.
* Fixed an issue with the check for known effects.
* As we do not need to set a default, use simple accessing by key.
* Log if an unknown effect was selected.
* Added link to future documentation.
* moved regular updates definition to own method to be able to override behaviour in subclass
* moved filter by max entries to own method to be able to override behaviour in subclass
* event type used when firing events to the bus now based on variable to be able to override behaviour in subclass
* feed id introduced instead of url for storing meta-data about the feed to be able to fetch the same feed from different configs with different filtering rules applied
* keep the status of the last update; continue processing the entries retrieved even if a recoverable error was detected while fetching the feed
* added test cases for feedreader component
* better explanation around breaking change
* fixing lint issues and hound violations
* fixing lint issue
* using assert_called_once_with instead of assert_called_once to make it compatible with python 3.5
* add familyhub.py camera
* fix import and REQUIREMENTS
* add to coveragerc
* fix formatting to make houndci-bot happy
* ran scripts/gen_requirements_all.py
* use CONF_IP_ADDRESS
* Revert "ran scripts/gen_requirements_all.py"
This reverts commit 3a38681d8a.
* fix library name
* add missing docstrings and enable polling
* Sort imports
* Add first version of the Matrix bot
* It's a stupid but necessary change…
* Dont list it twice
* All hail the linter!
* More linter-pleasing
* Use the correct user ID
* Add expression commands
* Add tests for new validators
* Fix room alias handling
* Wording
* Defer setup
* Simplify commands
* Handle exceptions
* Update requirements
* Review
* Move login back to constructor
* Fix review comments
* Add basic PostNL sensor (WIP)
* Update PostNL sensor
* Bump version
* Small updates to PostNL package based on feedback
* Remove unused import
* Pass api to sensor
* Refactor based on feedback
* Update based on feedback
* Fix feedback
* Clean up
* Bugfiix
* Bugfix
* SCAN_INTERVAL fix
* Remove unused import
* Refactor for new wrapper implementation
* Update postnl package requirement
* Change throttle logic
* Update package version
* Add new line
* Minor changes
* Change refresh time to 30 minutes
* Update requirements_all.txt
* Adding USCIS component
* Adding Line after the class DOC
* Update : Extract USCIS logic code to Component
* Update : Extract USCIS logic code to Component
* Adding CURRENT_STATUS
* Change Error handling, remove date from attributes
* Update the Version for USCIS
* Update uscis.py
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
* Google Maps location sharing device tracker.
* Use ConfigType and change debug logging to _LOGGER.debug()
* Update to locationsharinglib 0.3.0
* Remove unneeded lines.
* Use hass.config.path for config file location.
* Fixed remarks
* Return boolean in setup_scanner
* Create trafikverket_weatherstation.py
Created PR 12111 but due to permission issue I'm creating a new fork and PR.
* Added dot
Added dot to the first (second) row of the file, after the description.
* Corrections based on feedback
Done:
- Run flake8 before this commit
- Fixed invalid variables
- Shortened the xml variable/query via if statement (air_vs_road)
- Moved imports if update() to top of the file
- Imported CONF_API_KEY and CONF_TYPE
- Updated documentation (api_key): home-assistant/home-assistant.github.io#4562
Actions left:
- Error handling
- Request timeout
- Add sensor (file) to .coveragerc
* Multiple corrections
Done:
- Executed pylint and flake8 tests before commit
- Fixed import order
- Implemented request timeout
- Used variable air_vs_road in the return as well
Actions left:
- Error handling
- Add sensor (file) to .coveragerc
* Error handling
Done:
- Error handling for network
- Error handling for JSON response
* Added trafikverket_weatherstation.py
Added trafikverket_weatherstation.py in correct order.
* Road as default
Changed if statement to check for 'road' which means it will always defaulting to 'air' in other cases. Even if it will only accept 'air' and 'road' from the PLATFORM_SCHEMA.
* Updated variable names
Updated variable names to be more understandable as requested by @MartinHjelmare
* Standard Libraries
Grouped Standard Libraries
* Return None
Changed return None to only return as suggested.
* Added a simple component to support the BLNET
Adds a component based on pyblnet, that hooks up the blnet to home assistant
* Adds support for custimzation of blnet sensor devices
* Setting up blnet as a platfrom
* Updated use of state_attributes
Now the friendly_name (and for digital values the mode) is set in the state_attributes whereas the name is defined as "blnet_(analog|digital)_{sensornumber}" so you can reliably add them to groups.
* Added support for the SyncThru printer web service
* Added pysyncthru to the requirements
* Changed to Dependencis, import inside setup_platform
* Switch back to REQUIREMENTS
Looks like DEPENDENCIES is not meant for python packages but for other HA components
* Fixed access to _attributes
* Final fix
* Several Bugfixes
When the printer goes offline, the last state will be kept.
Also now checks if the printer is reachable upon setup
* Register syncthru as discoverable
* Included possible conditions to monitor
* Split the printer sensor in several seperate sensor entities
* Fixed bug at sensor creation, pep8 conform
* Bugfix
* Bugfix
* Removed Blnet components
* Fixed unused import
* Renamed discoverable to samsung_printer
* Removed unused Attribute _friendly_name
* Inserted missing space
* Pinned requirements and added to coveragerc
* Reduced redundancy by condensing into multiple sub-classes
* Fixed indentation
* Fixed super constructor calls
* Fixed super constructor calls
* Fixed format
* Resolving style issues and using name instead of friendly_name
* Pinned pysyncthru in requirements_all, having trouble with friendly_name
* Iterating over dictionary instead of dict.keys()
* ran gen_reqirements_all.py
* Fixed flake 8 issues
* Added a simple component to support the BLNET
Adds a component based on pyblnet, that hooks up the blnet to home assistant
* Implemented requested changes
* raised dependecies to pysyncthru version that has timeouts
* Raised required version for full timeout support
* Adds support for custimzation of blnet sensor devices
* Setting up blnet as a platfrom
* Updated use of state_attributes
Now the friendly_name (and for digital values the mode) is set in the state_attributes whereas the name is defined as "blnet_(analog|digital)_{sensornumber}" so you can reliably add them to groups.
* Added support for the SyncThru printer web service
* Added pysyncthru to the requirements
* Removed Blnet components
* Pinned requirements and added to coveragerc
* Fixed indentation
* Fixed format
* Pinned pysyncthru in requirements_all, having trouble with friendly_name
* ran gen_reqirements_all.py
* Updated requirements_all
* Renamed sensor objects, removed passing of hass entity
* Removed merge artifacts
* Reset syncthru to newest state
* Updated requirements_all
* switched to using the newest version of pysyncthru
* Sorted coveragerc
* Add IFTTT alarm control panel
* Update .coveragerc
* Add support for code
* Bugfix
* Fix logging problem
* Pin requirements
* Update requirements_all.txt
* Fix lint errors
* Use ifttt component as a dependency instead of interacting with ifttt manually
Take into account review comments
* No default value for code
* Take into account review comments
* Provide a "push_alarm_state" service to change the state from IFTTT
* Add service description
* Fix @balloob review comments. Thanks!
* Fix service description name
* Add initial support fo HomematicIP components
* Fix module import
* Update reqirments file as well
* Added HomematicIP files
* Update to homematicip
* Code cleanup based on highligted issues
* Update of reqiremnets file as well
* Fix dispatcher usage
* Rename homematicip to homematicip_cloud
* Added Foobot device sensor
* Added error handling tests
* Corrections after PR review.
* Migrated to async/await syntax
* lint fixes
* stop raising HomeAssistantError
* debug log for number of requests
* Moved shared data between sensors from a class attribute to a separate class
* Made test more async-aware
disabled setup error test for now as it's not working
* Working failure scenarios tests
* Added Zillow Zestimate sensor.
* Add zestimate.py to .coveragerc
* Fix line 167 81>80
* Incorporate tinloaf changes.
* Saving work
* Incorporate changes requested by MartinHjelmare
* Remove unnecessary import
* Add a blank line between standard library and 3rd party imports
* Support TekSavvy Unlimited Plans
Support TekSavvy account usage for unlimited plans.
Seeing cap limit to 0 will now provide unlimited behaviour on usage calculations.
* Add unit tests to sensor.teksavvy
Add coverage unit tests to TekSavvy Sensor component, none existing previously.
* Added Sense energy monitor sensor
* Added missing =
* Style updates
* Added newline, but not blank line at end of file
* Updated sense API to 0.2.2
* Moved import in function
* Fixed tabs
* Updated requirements
* Removed bare except
* Longer update times and more stats
* sense api update
* Updated to use string formatting
* Setup to use monitored_conditions
* Fix syntax
* API update
* blank space fixes
* More blank fixes
* API version update
* Fixed comment format
* removed unneeded function call
* Add Songpal ("Sony Audio Control API") platform
This adds support for a variety of Sony soundbars and potentially
many more devices using the same API.
See http://vssupport.sony.net/en_ww/device.html for list of
supported devices.
* add songpal requirement
* update coveragerc
* fix linting
* add service description to yaml
* add entity_id
* make pylint also happy.
* raise PlatformNotReady when initialization fails, bump requirement for better exception handling
* use noqa instead of pylint's disable, fix newline error
* use async defs and awaits
* Make linter happy
* Changes based on code review, fix set_sound_setting.
* define set_sound_setting schema on top of the file
* Move initialization back to async_setup_platform
* Fix linting
* Fixes based on code review
* Fix coveragerc ordering
* Do not print out the whole exception trace when failing to update
* Do not bail out when receiving more than one volume control
* Set to unavailable when no volume controls are available
* first attempt at synology chat as a notification platform
* quick fix
* houndci and coverage
* Cleanup
Some cleanup of the file
* Ugh underscore
* Use string formatting
* Remove `CONF_NAME`
* Added python-spotcrime sensor
* Added python-spotcrime sensor
* Remove accidental included file
* Update indentation to match PEP8
* Remove days from const.py
* Changed default days to 1
* Incorporate changes requested by MartinHjelmare
* Remove unnecessary import and fix lint error
* Adds folder sensor
The state of the sensor is the time that the most recently modified
file in a folder was modified.
* Address lint errors
* Edit docstrings
Makes the recommended edits to docstrings
* Update .coveragerc
Add sensor/folder.py
* Update folder.py
* Address requests
Address requests changes
* Adds folder
* Adds test, tidy up
* Tidy
* Update test_folder.py
* Update folder.py
* Fix setup
Fix setup with else statement
* Update folder.py
* Update folder.py
* Remove list of files from attributes
* Update test_folder.py
* Update folder.py
* Update test_folder.py
* Update folder.py
* Update folder.py
* first working version of BMW connected drive sensor
* extended coveragerc
* fixed blank line
* fixed pylint
* major refactoring after major refactoring in bimmer_connected
* Update are now triggered from BMWConnectedDriveVehicle.
* removed polling from sensor and device_tracker
* backend URL is not detected automatically based on current country
* vehicles are discovered automatically
* updates are async now
resolves:
* https://github.com/ChristianKuehnel/bimmer_connected/issues/3
* https://github.com/ChristianKuehnel/bimmer_connected/issues/5
* improved exception handing
* fixed static analysis findings
* fixed review comments from @MartinHjelmare
* improved startup, data is updated right after sensors were created.
* fixed pylint issue
* updated to latest release of the bimmer_connected library
* updated requirements-all.txt
* fixed comments from @MartinHjelmare
* calling self.update from async_add_job
* removed unused attribute "account"
* added smappee component
* Fixed pylint errors and a few use cases when starting up with invalid credentials
Added coverage omit
* Added support to run only locally
Added a few more sensors
Added more error handling
Better parsing and debug message
* fixed smappee switch after local/remote support was added
* Smappee - update switches for local support (#3)
* Merged with local version
* Updated smappy library with the patched one
Fixed lint, added merge missing param
Fixed missing run for requirements_all.txt
Fixed lint
* Fixed on/off based on library. Reverted change used for testing stacktrace
* Fixed switches to work with both remote and local active
Fixed lint
Fixed switches
Fixed lint
* nothing to update per switch as the states are not saved by smappee system
* added better error handling for communication errors with smappee
* fixed lint errors
* fixed comment
* fixed lint error
* fixed lint error
* update smappee module with reviewer comments
- update smappy module
- cache cloud api requests
- added actuator info
- updated return states
* Add support for August doorbell
* Address PR comment for August platform
* Address PR comment for August binary sensor
* Address PR comment for August camera
* Addressed PR comment for August lock
* - Fixed houndci-bot error
* - Updated configurator description
* - Fixed stale docstring
* Added august module to .coveragerc
* Added the Xiaomi TV platform.
* Implemented a more efficient default name.
* Fixed a few style errors that slipped past the eye.
* Indicate that state is assumed.
* First version of remote xiaomi-miio
* added to coveragerc
* fixed pylint error
* misc fixes and input validation
* address syssi's requests except device and async_service_handler
* forgot to run linter
* implemented async_service_handler
* fixed delay == None, honor timeout given by user, pythonic compare of None
* Added some whitespace for readability, added error message to turn_on and turn_off, fixed services.yaml examples
* fixed pylint errors
* readd pass for readability
* fixed small stuff
* Use RemoteDevice, Make send_command non-async
* Ready code for next version of python-miio (Support for pronto hex codes)
* cast command_optional to int, better input validation, fixed index out of bounds error.
* revert code now in python-miio
* ready for python-miio 0.3.5
* Removed unneccary return statements
* require 0.3.5
* Rebase and update requirements_all.txt
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* Add baudrate option
* merge
* Added Mediaroom media_player component
* Updated header
Works with MEO and VDF set-top boxes in Portugal
* formatting
* Development Checklist (done)
* fix formatting according to houndci-bot
* more format fixing (tks houndci-bot)
* more fixes
* too much cleanup...
* too much
* pylint check
* Initial commit
Basic configuration testing
* flake8 and lint
* Add Mercedes me component
* pump api version to 0.1.2
* Add Mercedes me component
* pump api version to 0.1.2
* clean up code
* Code cleanup
* Remove unneeded return statement
* Return statements added again
* Implement requested changes
* Rework component, move data load to component
* lint
* remove debug logging
* Change RainCloud comments, change from track_utc_time to track_time_interval
* Final cleanup for version 1
* Base platform in place
* Logic in place
* Requirements and coverage
* Fixed some linting issues
* Small attribute reorganization
* Collaborator-requested changes round 1
* Updated documentation
* worked on first version of IOTA wallet
* added sensor for IRI node
* added requirements
* ignored new component in test coverage
* changed length of line
* fixed linter issues
* changed requested changes
* moved attributes of IRI node
* change coverage definitions
* changed loading of platforms
* changed loading of platforms
* changed initial state of wallet sensor
* changed handling of config
* changed attribute handling for IOTA node sensor
* Follow the component style
* Fix ordering and docstring
* Fix pylint issue
* New venstar climate component
* Corrected items raised during the PR process.
* Corrected flak8 issues.
* Add support for venstar models without humidity control.
* Changed the idle operation mode to off. Few other adjustments.
* Minor changes (log messages, sorting, etc.)
* Adding BME680 Sensor Component
* Flake8 lint fixes
* PyLint fixes
* Fix for log line
* Updating requirements for testing
* Fix PyLint Log format errors and add to coveragerc ommisions as requires sensor connected
* Regenerated requirements_all.txt
* Added Pylint exception for import error of system specific library
* Refactored async_add_platform to move IO out to avoid heavy yield usage
Add waterfurnace platform
This adds support for waterfurnace geothermal systems. This is
implemented as a component as there will eventually be some active
control elements. This is not done as a climate platform because
geothermal systems work best when set at a constant temperature as
they are tuned to keep within 0.5 degrees F of a setpoint, and large
temperature shifts are slow and expensive.
This is done in the Data + Sensors model, with the Data component
having a regular update thread. That thread needs to call the read()
function at least every 30 seconds otherwise the underlying websocket
is closed by the server.
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Updated requirements_all.txt with gen_requirements_app.py
* Pylint fix: No space allowed around keyword argument assignment
* PR review changes
* Moved auto setup from platforms to ihc component
* Do no auto setup if there are no IHC products found
* Changes from PR review
* Added support for TekSavvy bandwidth sensor
* Variable name fix
* Units are Gigabytes and not Gigabits
* Change REST calls to use asyncio
* houndci violation fix
* pylint fix
* Fix for code review
* Import order asyncxxx:wq
* Tweak docstrings and log message
* mychevy: added basic mychevy component
This implements a component using the mychevy library (which utilizes
selenium to webscrape the mychevy website for onstar for your
car). The architecture works by having a background thread doing
periodic polling of the website, and updating the sensors when new
data is found.
This requires rather more setup than most platforms, as you need
working selenium. Instructions will be provided on the component
list. All the sensors are spawned and coordinated from a single "hub"
as they are really just attributes of the same web scraping session.
* mychevy: only poll every 30 minutes
* mychevy: update sensors
* mychevy: better error handling
* mychevy: tweaking for refactor
* mychevy: bump version to handle odometer > 1000
* mychevy: great sensor reorg
* mychevy: add binary sensors
* mychevy: bump mychevy requirement
* mychevy: use dispatcher
Instead of directly modifying the sensors, this lets us use a
dispatcher to have sensors pull information from the car object when
there is a relevant update for them.
* mychevy: remove from coverage
* mychevy: dedicated constants for dispatch signals
This makes the dispatch signals dedicated topics, and fixes updating
the state on the sensors so that they are correctly updated.
* mychevy: updated with comments from martinhjelmare
* mychevy: set battery icon based with helper function
* Address additional review feedback
* Address additional review comments
* Add new iGlo component
* Missing comma
Add extra blank lines
* Dont change state in turn_on
Remove unused variables
Update before add
* Fixing some lint issues
* Add toucline platform
* Fix bugs suggested by houndci-bot
* Fix bugs suggested by houndci-bot
* Fix style based on comments and lint
* Remove target temperature
* Fix unexpected EOF
* Fix unexpected EOF
* Fix wrongfully named numberOfDevices variable
* Add target temperature
* Update requirements_all.txt
* Change after review
* Add supported features
* Remove update in constructor
* Set member variables to none in constructor
* Minor changes
* Added Daikin climate component
* Fixed tox & hound
* Place up the REQUIREMENTS var
* Update .coveragerc
* Removed unused customization
* Prevent setting invalid operation state
* Fixed hound
* Small refactor according to code review
* Fixed latest code review comments
* Used host instead of ip_address
* No real change
* No real change
* Fixed lint errors
* More pylint fixes
* Shush Hound
* Applied suggested changes for temperature & humidity settings
* Fixed hound
* Fixed upper case texts
* Fixed hound
* Fixed hound
* Fixed hound
* Removed humidity since even the device has the feature it cant be set from API
* Code review requested changes
* Fixed hound
* Fixed hound
* Trigger update after adding device
* Added Daikin sensors
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed coverage decrease issue
* Do less API calls and fixed Travis failures
* Distributed code from platform to climate and sensor componenets
* Rename sensor state to device_attribute
* Fixed hound
* Updated requirements
* Simplified code
* Implemented requested changes
* Forgot one change
* Don't allow customizing temperature unit and take it from hass (FOR NOW)
* Additional code review changes applied
* Condensed import even more
* Simplify condition check
* Reordered imports
* Disabled autodiscovery FOR NOW :(
* Give more suggestive names to sensors
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
* Support for EcoNet water heaters.
* Fixed requested changes.
* Added logging when temp or operation mode are None
* More fixes from PR review.
* Updated pyeconet version to fix natural gas water heater error. Last PR review fix.
* add required files
* add sochain sensor
* add missing schema
* end first sentence with a period to make travis happy
* upgrade to python-sochain-api 0.0.2 and use asyncio
* add missing _LOGGER and fix long line
* move object setup to async_setup_platform
* rename chainSo variable to chainso
* Add support for Logitech UE Smart Radios.
* Removed full stops to please Hound's line limit.
* Updated with requested changes.
* Fix Pylint Flake8 problem.
* Updated with requested changes.
* Add Canary component
* Made some change to how canary data is updated and stored
* Updated to use py-canary:0.1.2
* Addressed flake8 warnings
* Import canary API locally
* Import canary API locally again
* Addressed pylint errors
* Updated requirements_all.txt
* Fixed incorrect unit of measurement for air quality sensor
* Added tests for Canary component and sensors
* Updated canary component to handle exception better when initializing
* Fixed tests
* Fixed tests again
* Addressed review comments
* Fixed houndci error
* Addressed comment about camera force update
* Addressed comment regarding timeout when fetching camera image
* Updated to use py-canary==0.2.2
* Increased update frequency to 30 seconds
* Added support for Canary alarm control panel
* Address review comments
* Fixed houndci error
* Fixed lint errors
* Updated test to only test setup component / platform
* Fixed flake error
* Fixed failing test
* Uptake py-canary:0.2.3
* canary.alarm_control_panel DISARM is now mapped to canary PRIVACY mode
* Fixed failing tests
* Removed unnecessary methods
* Removed polling in canary camera component and update camera info when getting camera image
* Added more tests to cover Canary sensors
* Address review comments
* Addressed review comment in tests
* Fixed pylint errors
* Excluded canary alarm_control_panel and camera from coverage calculation
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f823.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Add iAlarm support
* Minor fixes to iAlarm
* Rename ialarmpanel to ialarm and add a check for the host value
* corrections in the value validation of ialarm
* add a missing period on ialarm
* test the facebook notification component
* respond to hound feedback
* remove unnecessary line breaks
* parse_qs not needed with requests_mock
* remove facebook notifier from .coveragerc
* New sensor viaggiatreno.
I've messed up the previous PR so here it is in a new one.
Should include also all corrections from @pvizeli
* fixes from PR 10522
* fixed import order
* requested changes from MartinHjelmare
* Support presence detection using Hitron Coda router
* at least 2 spaces before inline comment
* Update hitron_coda.py
* rewrote authentication code, it actually works now
* make line slightly shorter to comply with hound
* Removed hardcoded IP address
* Fix string formatting, add timeout, and use generator
* Update hitron_coda.py
* Update hitron_coda.py
* Update hitron_coda.py
* typo
* update .coveragerc
* Update stale URL
* Add sensor platform for luftdaten.info
* Add monitored conditions to platform schema
* Make monitored conditions config obligatory
* Improve inline documentation
* Import first standard libs then 3rd party libs
* Combine resource url using format
* Remove unnecessary try..except block
* Use state “None” instead of STATE_UNKNOWN
* Minor changes incl. removal of unused vars
* Add missing spaces
* MVP integration with Remember The Milk.
This version offers a service allowing you to create new issues in Remember The Milk.
* fixed pylint issue with import path
* - added files to .coveragerc as the server inerface is hard to test
- added tests for config file handling
* fixed lint error
* added missing docstrings
* removed stray edit
* fixed minor issues reported by @fabaff
* changed naming of the service, so that serveral accounts can be used
* added disclaimer
* moved service description to services.yaml
* fixed blank lines
* fixed structure of configuration
* added comment about httplib2
* renamed internal config file
* improved logging statements
* moved entry in services.yaml into separate folder.
Had to move the component itself as well.
* fixed static analysis findings
* mocked first test case
* fixed bug in config handling, fixed unit tests
* mocked second test case
* fixed line length
* fixed static analysis findings and failing test case
* also renamed file in .coveragerc
* control flow changes as requested by @balloob
* Add unit test for hddtemp sensor.
* Remove sample fixture and include it in the code.
* Add test to raise coverage.
* Fix bug when host is not reachable.
* Minor code cleanups.
* More code cleanups.
* Add Nederlandse Spoorwegen sensor
* Remove unused 'delay' option.
* Apply requested code reviewed changes
- use constants from const.py
- ensure the configuration is a list
- verify credentials upon platform setup
- verify station input
- add True as second param to add_device
- only call add_device if at least 1 sensor was setup
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Added Base Support for Linode
* Removed unused Attr
* Corrected some Typos
* updated requirements & coveragerc
* added import to prevent var not declared errors in linter
* Fixed Typo
* Added Switch Component for Linode and corrected some errors if data was blank
* Updated api lib to hopefully remove dependancy on enum34
* Fixed Reference error
* fix pylint errors
* Update linode.py
* Update linode.py
* Update linode.py
* Update linode.py
* Add support for different display currencies in CoinMarkerCap sensor.
* Add test for CoinMarketCap sensor.
* Add test dependency to gen_requirements_all.
* Fix review comments: use string formatting and less string case chanes.
* Initial support for SNMP switch
Supports setting integer values
* Resolves styling issues
* Updates requirements
* Remove commented out import
* Changes default community to private. Fixes linting errors.
* More linter fixes and bugfix in #state()
* Refactors the code to make it simpler.
* Xiaomi Air Purifier 2 integration
* Flake8 errors fixed.
Changes based on review.
* Service domain ("fan") updated and services properly prefixed by xiaomi_miio.
* The underlying library is called python-miio now. Imports and requirements updated.
* Version bumped. The underlying library is called python-miio now.
* Init commit of new whois sensor
* Updated requirements
* Resolved updated showing expired, added expired attr
* Added missing attribute in init, added whois to coveragerc
* Various PR comment changes
- Now more resiliant to invalid hostnames
- Removed various assumed STATE_UNKOWN setting
- Upfront check for valid hostname preventing the sensor starting with dud
- Resolved unit of measurement Day, Days, None issue
- Datetime formatting now done to iso 8601 standard
- Removed all expired usage, not really that useful
- Unused hass assignment
* More PR comment resolutions
- Resolved the dilemma with hosts / single host per sensor. Now running
single domain per sensor.
- Renamed host(s) to domain
* Moved coveragerc sensor location
* Re-phrased the expiration_date warning
* Resolved assumed updated_date existence
* Resolved missing indent
* Resolved discover_info typo
* Update whois.py
* add eph ember controls
* updates based on review
* remove unused import
* update to new version of pyephember
* added myself to codeowners as requested
* make codeowners alphabetical
* run fixed gen_requirements_all
* Update ephember.py
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.
* Added Toon support again
* Forgot about .coveragerc
* Fixed style issues
* More styling and importing fixes
* Implemented the suggestions made by @pvizeli
* The smallest fix possible
* Removed custom names for Toon states
* Fix last push with 2 outdated lines
* Removed HOME and NOT_HOME, moved to just climate states
* Bumped dependency for better handling of smartplugs that don't report power consumption
* Implemented changes as suggested by @balloob
* Rebase, gen_requirements_all.py finally working
* Xiaomi Smart WiFi Socket and Smart Power Strip integration
* Comment updated.
* Blank line removed.
* Typo fixed.
* Version of python-mirobo bumped.
* Version of python-mirobo bumped: Lightweight API changes.
* Additional API changes.
* Library version properly pinned again.
* Platform not ready behavior fixed.
Expose the device model as sensor attribute.
Device initialized log message added. Provides device model, firmware and hardware version.
* Component renamed: switch.xiaomi_plug -> switch.xiaomi_miio
* Revise based on review: Unused code removed. Filename updated.
* New Skybell platform with components
* Added skybell components to omit.
* Preemptively fixing lint issues (hopefully).
* Removed unused variable.
* Requested changes.
* Additional CRs
* Hopefully the last of the CR's!
* Introduced support to Travis CI
* Added Last Build Started sensor and simplified code
* Fixed logic error
* Simplified _LOGGER.debug statement
* Introduced support to Travis CI
* Added Last Build Started sensor and simplified code
* Fixed logic error
* Simplified _LOGGER.debug statement
* Renamed parameter since the repository_names expects a list
* Refactoring code to synchronous
* Simplified variables names
* Introducing support to Melnor RainCloud sprinkler systems
* Make monitored_conditions optional for sub-components
* Part 1/2 - Modified attributes, added DATA_ constant and using battery helper
* Part 2/2 - Refactored self-update hub
* Fixed change requested:
- Dispatcher signal connection
- Don't send raincloud object via dispatcher_send()
- Honoring the dynamic scan_interval value on track_time_interval()
* Inherents async_added_to_hass() on all device classes
* Makes lint happy
* * Refactored RainCloud code to incorporate suggestions.
Many thanks to @pvizelli and @martinhjelmare!!
* Removed Entity from RainCloud sensor and fixed docstrings
* Update raincloud.py
* Update raincloud.py
* fix lint
* Added satel_integra alarm panel and binary sensor platform
* Fixed several issues after review: import cleanup, reduced messaging levels to debug, other.
* Fixes after review: removed dead code, improved loop, sorted imports.
* Changes after review, not yet working
* Changes after review - wrapped async code, killed ensure_future, moved async_load_platform into jobs
* Basic MQTT vacuum support
* PR feedback
* Support for fan_speed and send_command services
* Fix configurable topics
* Use configurable bools for cleaning/docked/stopped state
* Fix language in docstring
* PR feedback
* Remove duplicate vacuum/state topic defaults
* Fix incorrect template for docked value
* Move direction like default mqtt platfom/components
* fix None on templates
* fix tests
* fix int
* fix tests
* ready to merge
* rename xiaomi to xiaomi_aqara
* rename xiaomi vacuum and xiaomi phillips light to xiaomi miio
* update discovery and tests
* style
* update discovery and tests
* Still use Philips as name
* Added basic Todoist support
Creating a new platform for Todoist - https://todoist.com
* Added more robust support for creating new custom projects.
This means you can now specify things such as 'all tasks due today', 'all tasks due this week', etc.
* Changed logging from warning to info.
* Added label and comment support.
* Added support for overdue tasks.
* Changed logging to info instead of warning; fixed labels.
* Added ability to filter projects by name.
* Rename 'extra_projects' to 'custom_projects'.
* Updated code to follow proper HASS style guidelines.
* Got new_task service running.
* Update .coveragerc.
* Remove old try-catch block.
This is left over from before we validated the inputs using the service schema.
* Updated to use PLATFORM_SCHEMA.
* Updated component to use Todoist API.
* Removed commented-out code.
This also removes functionality regarding finding out how many comments a task has.
This functionality may be added back in the future.
* Clarified TodoistProjectData, removed fetching comments.
* Fixed bug where projects were grabbing all tasks.
* Fixed bug where due dates were being ignored.
* Removed debug logging.
* Fixed linter errors.
* Fixed Todoist docstring to be in line with HASS' style rules.
* Organized imports.
* Fixed voluptuous schema.
* Moved ID lookups into .
* Moved ID lookups into setup_platform.
* Cleaned up setup_platform a bit.
* Cleaned up Todoist service calls.
* Changed debug logging level.
* Fixed issue with configuration not validating.
* Changed from storing the token to storing an API instance.
* Use dict instead of Project object.
* Updated to use list comprehension where possible.
* Fixed linter errors.
* Use constants instead of literals.
* Changed logging to use old-style string formatting.
* Removed unneeded caching.
* Added comments explaining 'magic' strings.
* Fixed bug where labels were always on the whitelist.
* Fixed linter error.
* Stopped checking whitelist length explicitly.
* Adds the AirVisual air quality sensor platform
* Updated .coveragerc
* Removed some un-needed code
* Adding strangely-necessary pylint disable
* Removing a Python3.5-specific dict combiner method
* Restarting stuck coverage test
* Added units to AQI sensor (to get nice graph)
* Making collaborator-requested changes
* Removing unnecessary parameter from data object
* Add Tank Utility sensor
* Fix, disable Pylint errors
* Move coverage omission to single platform section
* Do not catch unknown exceptions
* Check for invalid credentials in setup
* Update tank_utility.py
* Adds support for the Xiaomi Philips LED Ball and Ceiling Lamp
* Documentation url updated.
* New component to .coveragerc added.
* Unused import removed.
* translate labeled as static method.
* Mixed parameters in log message fixed.
* Order of requirements_all.txt fixed.
* Plattform updated. It's async now.
* Simplifiable if-statement fixed.
* Some more clean-up of unneeded stuff.
* Platform schema updated.
* Component is called xiaomi_philipslight now.
* Requirements all updated.
* Initialization of some variables updated.
* Raise PlatformNotReady exception if light cannot be discovered.
* Import of math removed.
Missing space added.
* Remove unnecessary updates
* Add support for Prowl notifications.
* Use HA session handler.
* Simplify http request logic.
* flake
* fix double fetch data
* Remove periods from log messages
* Inital USPS Camera expansion
* Cleanup debugging, add camera change interval
* Change to local nomail image
* Explicitly pass in date
* Move camera date info to model property
* Fix copy typo
* Fix hound line-length
* Fix lint whitespace
* Fix requirements
* Bump myusps version, clarify interval, alter update scheme
* Add units
* Code cleanup, address comments
* Use built-in scan interval, remove nomail image
* Remove logging line
* Add HipChat notify service.
* Change HipChat notify service to use python-simple-hipchat-v2.
* Change HipChat notify service to use hipnotify
* Change HipChat notify service to remove redundant validation
* Add new device tracker for Huawei Routers.
This was tested with the HG8247H model, used by Vodafone
Portugal for the Fiber service.
* add to .coveragerc; remove import and space
* add comments and fix lint
* rename methods
* huawei_router: add constants to scanner class
* huawei_router: remove lock; use format() in string
* huawei_router: use tupple instead of member only class
* huawei_router: reduce min scan time
* huawei_router: lint
* huawei_router: lint
* huawei_router: add missing lines in imports
* huawei_router: correctly decode string after router firmware update
* Remove things that is done on core now
* Add RainMachine switch platform
* Updated requirements_all.txt
* Cleaning up CI and coverage results
* Small update to deal with older pylint
* Fixed small indentation-based error
* Added some more defensive try/except logic around calls
* I'm not a fan of importing a library multiple times :)
* Making PR-requested changes
* Fixed ref to positional parameter
* Attempting to fix broken linting
* Ignoring no-value-for-parameter pylint error
* Initial implementation of Asterisk Mailbox
* Rework asterisk_mbox handler to avoid using the hass.data hash. Fix requirements.
* Handle potential asterisk server disconnect. bump asterisk_mbox requirement to 0.4.0
* Use async method for mp3 fetch from server
* Add http as dependency
* Minor log fix. try to force Travis to rebuild
* Updates based on review
* Fix error handling as per review
* Fix error handling as per review
* Refactor voicemail into mailbox component
* Hide mailbox component from front page
* Add demo for mailbox
* Add tests for mailbox
* Remove asterisk_mbox sensor and replace with a generic mailbox sensor
* Fix linting errors
* Remove mailbox sensor. Remove demo.mp3. Split entity from platform object.
* Update mailbox test
* Update mailbox test
* Use events to indicate state change rather than entity last-updated
* Make mailbox platform calls async. Fix other review concerns
* Rewrite mailbox tests to live at root level and be async. Fixmailbox dependency on http
* Only store number of messages not content in mailbox entity
* Added support for Egardia / Woonveilig alarm control panel
* Added support for Egardia / Woonveilig alarm control panel
* Added support for Egardia / Woonveilig alarms
* Updating egardia support with exception handling and other fixes
* Egardia platform, requirements file updated
* Fixing state checking
* Adding exception handling
* Removing unnecessary logging
* Removing unnecessary logging
* Updating to egardiadevice component 1.0.10
* Improving exception handling
* Adding implementation of egardiaserver for alarm triggered status
* Clean-up
* Fix my previous change
* Fix tests for Demo vacuum platform (and increase coverage)
* increase coverage of xiaomi vacuum tests and include in coverage
Also little fixes
* remove print statement
* Xiaomi vacuum as component with switch, sensors and services
- Conversion from switch platform to async component.
- Add services proposed in #8416 to the new component, with shorter names.
- Add sensors for the vacuum robot as a selectable list from `battery`, `state`, `error`, `fanspeed`, `clean_time` and `clean_area` (the state attributes of the switch). The sensors don't poll, but listen to a signal to update the state, the switch fires this signal when updating.
- Assign default icons to sensors and the switch (`mdi:google-circles-group` looks like the robot!)
* path change in requirements_all (from switch platform to component)
* copy pasting is a bad habit
* services to the components services.yaml, modify .coveragerc
* review: use with multiple hosts, fix calls to async_add_devices, fix ranges for services
* `icon_for_battery_level` util method
* Xiaomi vacuum as platform of new component vacuum
- Created new component `vacuum` from a ToggleEntity.
- Add services `turn_on`, `turn_off`, `cleaning_play_pause`, `stop`, `return_to_base`, `locate`, `set_fanspeed` and `send_command`.
- Remove the main switch for the xiaomi vacuum (the toggable main entity is the switch).
- Add `support flags` for the common services
- Assign default icons to sensors and the switch (`mdi:google-circles-group` looks like the robot!)
- Move services descriptions to a yaml file for the new component.
- Update requirements_all.
- Update coveragerc.
* fix coveragerc
* fix battery icon helper to use more icons
* remove sensors, create properties and support flags for custom UI
* cleaning
* updated state_attrs for filtering in UI, renamed platform to simply `xiaomi`
* fix platform rename
* change fanspeed and expose `fanspeed_list` to use speed steps
* minor fixes
- Rename service `start_pause`
- Add 'Error' attribute only if `got_error`.
- Minor changes
* rename state attrs
* rename state attrs
* review changes: cut fan__speed, style changes, remove logging, and more
* add ATTR_COMMAND = 'command' to const
* pop entity_id from service data
* remove property accessor for vacuum object
* lint fix
* fix extra attrs names
* module level functions for calling the services
* params as optional keyword for `send_command`
* params as optional keyword for `send_command`, remove debug logs
* explicit parameters for `set_fan_speed` and `send_command`
* Demo platform for the vacuum component
* vacuum tests for the Demo platform
* some fixes
* don't omit vacuum
* vacuum tests for the Xiaomi platform
* fix test
* fix
* fix xiaomi test
* fix coveragerc
* test send command
* fix coveragerc
* fix string formatting
* The coverage is to low. It need 93% or more
* New media_player platform for Russound devices using the RIO protocol
Auto discovers zones and sources
Handles media metadata from sources that support it
asyncio implementation
Push updates for any zone or source changes so no polling required.
* Fixed up linting issues
* Addressing PR feedback
Updated russound_rio dependency to 0.1.3
Use enumerate_zones and enumerate_sources methods instead of doing it in
the platform.
Register callbacks in async_added_to_hass coroutine
Corrected behavior of async methods
* Manual alarm with MQTT control
* Duplicate manual control panel code instead of extending it
* Duplicate manual alarm test as well; modify for manual_mqtt
* Add MQTT-specific tests for manual_mqtt alarm
* Refactored Amcrest to use central hub component
* Set default streaming source to snapshot
* Simplified code by using discovery platforms
* Makes lint happy
* Update authentication method to basic
* Fixed lint issues
* Makes Amcrest hub async
* Make Amcrest hub IO synchronous and disabled ffmpeg dependency on sensor/amcrest.
* Removed async to load component
* Organized import order
* Update amcrest.py
Prometheus (https://prometheus.io/) is an open source metric and alerting
system. This adds support for exporting some metrics to Prometheus, using
its Python client library.
* New component to connect to VELUX KLF 200 Interface
* Issue #8203: modifications as suggested by hound
* Issue #8203: added entries to .coveragerc
* moving velux/__init__p.y to velux.py
* Issue #8203: Using hass.data for storing global object, updated docstrings
* Issue #8203: validation of config, using standard approach for getting config values
* Issue #8203: Exception handling if connection to velux component fails
* Issue #8203: removed unused import
* Issue #8203: Some minor changes within docstrings
* Issue #8203: Some minor changes within docstrings
* Issue #8203: added dependency for pyvlx to requirements_all.txt
* Issue #8203: less broad exception
* Issue #8203: increased version
* Issue #8203: changed position of pyvlx within requirements_all.txt
* Issue #8203: bumped version of pyvlx to 0.1.3 (better handling of retries when token expires)
* reset pointer to home-assistant-polymer
* Issue #8203: modifications as suggested by fabaff
* hound *sigh*
* First version of a LaMetrci platform with a Notify module
* Cleanup, fix formatting bugs
* More formatting
* Formatting
* Updated requirements
* formatting
* Formatting
* More formatting
* Dummy commit for new Travis CI run
* Refactoring class methods to instance methods
* Cleanup unused classed
* Removed Eddystone_weatherurl that had nothing to do with this component
* Cleanup class methods
* Cleanup requirements
* Removed broad excepts
Removed storage of LaMetric devices
* Removed unused import
* Initial commit - new CityBikes platform
* Several syntax fixes.
* Added imperial unit support.
* Added station list lenght validation.
* Style fixes.
* Updated requirements.
* Updated .coveragerc.
* Fixed style problems according to pylint output.
* Updated SCAN_INTERVAL value.
* Fixed station names.
Removed unnecessary calls to `slugify`.
Changed the base name to reflect the name of the bike sharing
network, instead of the more generic `citybikes`.
* Small style fix.
* Use async version of python-citybikes
* Made platform setup async.
* Made some more things async.
* Switched to constants.
* WIP: different approach to async.
* Removed python-citybikes depnedency to fix async issues.
* Removed unnecessary hidden property.
* Style fixes.
* Retry network detection.
* Style fixes, and base name usage.
* Fixes according to comments.
* Use cv.latitude instead of coercing to float.
* Updated requirements.
* Several fixes and improvements.
* Started using PlatformNotReady exception.
* Cached the networks list result to avoid unnecessary API requests.
* Switched the asyncio.timeout to use a constant.
* Refactored CityBikes API requests into a separate function
* Fixed linting errors.
* Removed unnecessary requirement.
Phil Bruckner
z0p
cpopp
Дубовик Максим
michaeldavie
David Roberts
Franck Nijhof
Otto Winter
Morten Trab
Eduard van Valkenburg
jgriff2
Robin Wohlers-Reichel
Jardi Martinez
András Rutkai
Baptiste Candellier
Jc2k
David Bonnes
rolfberkenbosch
Fabian Affolter
UgaitzEtxebarria
Daniel Høyer Iversen
Penny Wood
Sylvia van Os
Aaron Bach
Tomer Figenblat
Pascal Roeleven
ThaStealth
GeoffAtHome
Michał Węgrzynek
cgtobi
Martin Fuchs
Evan Bruhn
Paul Madden
Ben Dews
panosmz
Markus Ressel
Jason Hu
Finbarr Brady
Klaudiusz Staniek
Andrew Sayre
Andreas Rydbrink
Robbie Trencheny
Rohan Kapoor
Heine Furubotten
Fredrik Erlandsson
Robert Svensson
Paulus Schoutsen
Jeff Irion
Marco Orovecchia
Zak
Jose Motta Lopes
Colby Rome
Leonardo Merza
Alistair Galbraith
Miroslav Ždrale
David F. Mulcahey
ktnrg45
Matt Snyder
Phil Cole
Victor Cerutti
Thomas Passer Jensen
CrazYoshi
On Freund
Timmo
Joakim Sørensen
Gido
MatteGary
Stealth Hacker
Julien Brochet
Eliseo Martelli
Jonas Pedersen
Mateusz Korniak
Mattias Welponer
Jon Caruana
zhujisheng
Spencer Oberstadt
pbalogh77
Dan Cinnamon
Robin
Michael Dubno
Andre Lengwenus
SNoof85
Max Rydahl Andersen
Christian Biamont
tmd224
Colin Harrington
Thibault Maekelbergh
Sander Geerts
James Hilliard
Jonathan McDowell
Levi Govaerts
Brig Lamoreaux
horga83
majuss
Andrea Tosatto
Jason Hunter
kbickar
Andy Castille
Jonathan Keljo
mvn23
Adam Belebczuk
jxwolstenholme
Richard Patel
Matthew Garrett
William Scanlon
Keiran S
Martin Mois
marcolertora
Nick Horvath
Glenn Waters
Florian Klien
Heiko Thiery
Diogo Gomes
Kevin Fronczak
Sean Wilson
cdce8p
Steven Looman
Jedmeng
Daniel Winks
Baptiste Lecocq
PhracturedBlue
Adam Dullage
Abílio Costa
Ville Skyttä
Marcel Hoppe
Dom
Pavel Pletenev
JC Connell
Tom Harris
Greg Laabs
Colin Frei
Benoit Louy
Jesse Rizzo
Wim Haanstra
Josh Shoemaker
Juha Niemi
Peter Nijssen
huangyupeng
Joakim Sørensen
Martin Hjelmare
Sriram Vaidyanathan
Paulus Schoutsen
ruohan.chen
Nick Whyte
Pawel
Christoph Gerneth
Ben Lebherz
Anders Melchiorsen
Sergiy Maysak
Matthew Treinish
Luc Touraille
Thomas Krüger
Paulus Schoutsen
guillaume1410
David Ryan
Marcelo Moreira de Mello
Charles Garwood
Julian Knauer
ChristianKuehnel
Malte Franken
Nate Clark
c727
Gregory Benner
Pascal Vizeli
Jerad Meisner
Lukas Barth
Mick Vleeshouwer
Mohamad Tarbin
Mitko Masarliev
Viorel Stirbu
Johann Kellerman
David Broadfoot
Rene Nulsch
Michaël Arnauts
Qxlkdr
nielstron
maxclaey
BioSehnsucht
Fabien Piuzzi
Jeroen ter Heerdt
Mike O'Driscoll
Teemu R
Adam Mills
Robin
Mike Megally
Gerard
Henrik Nicolaisen
Joe Lu
Simon Nørager Sørensen
Conrad Juhl Andersen
kennedyshead
Craig J. Ward
Johannes Innerbichler
arcsur
Sean Dague
Jens Østergaard Nielsen
Jean-Philippe Jodoin
Nolan Gilley
Dan Nixon
Jesse Hills
abondoe
Frantz
William Scanlon
Thibault Cohen
Jordy
David Fiel
maxlaverse
GreenTurtwig
Menno Blom
Roman
Stefan Lehmann
Ludovico de Nittis
Rendili
Philip Kleimeyer
Derek Brooks
Fabrizio Furnari
Ari Lotter
Markus
lichtteil
David Grant
Greg. A
Ryan McLean
Richard Leurs
Georgi Kirichkov
Hydreliox
Sebastian Muszynski
Adam Cooper
Thom Troy
boltgolt
Rob Connolly
Mister Wil
nilzen
c-soft
Marcel Holle
Andrey Kupreychik
John Boiles
Jay Stevens
Jan Almeroth
runningman84
happyleavesaoc
Sergey Isachenko
Kris Molendyke
J.J.Barrancos
Brian Hopkins
aetolus
Martin Berg
Alok Saboo
John Mihalic
Philipp Schmitt
Tim Lyakhovetskiy
Eugenio Panadero
Julian Kahnert
thrawnarn
Martin Donlon
Thomas Delaet
Sean Gollschewsky
Colin O'Dell
Vlad Korniev
Aliaksandr
Russell Cloran
Julius Mittenzwei
Open Home Automation
Pierre Ståhl
Lev Aronsky