* New Transmission component and interaction
First commit for New Transmission component and interaction
* Fix commit
* Fix commit
* Fix + Switch checkin
Fix according to failed build and request, first checkin for Turtle Mode Switch in Transmission, still have to figure it out why it's not working.
* Bugfixing
* Fix commit
Multiple fix
* Fix
* fix for missing config
* Update on requirements_all.txt
* Fix in requirements_all.txt
* Fix
* Fix for build
* fix
* Fix
* Fix (again)
* Fix
* Fix indentation
* Fix indentation
* Fix Throttle
* Update .coveragerc
* Fix import and coveragerc
* Starting work on ecoal boiler controller iface.
* Sending some values/states to controller.
* Basic status parsing, and simple settings.
* Platform configuration.
* Temp sensors seems be working.
* Switch from separate h/m/s to datetime.
* Vocabulary updates.
* secondary_central_heating_pump -> central_heating_pump2
* Pumps as switches.
* Optional enabling pumps via config.
* requests==2.20.1 added to REQUIREMENTS.
* Optional enabling temp sensors from configuration yaml.
* autopep8, black, pylint.
* flake8.
* pydocstyle
* All style checkers again.
* requests==2.20.1 required by homeassistant.components.sensor.ecoal_boiler.
* Verify / set switches in update().
Code cleanup.
* script/lint + travis issues.
* Cleanup, imperative mood.
* pylint, travis.
* Updated .coveragerc.
* Using configuration consts from homeassistant.const
* typo.
* Replace global ECOAL_CONTR with hass.data[DATA_ECOAL_BOILER].
Remove requests from REQUIREMENTS.
* Killed .update()/reread_update() in Entities __init__()s.
Removed debug/comments.
* Removed debug/comments.
* script/lint fixes.
* script/gen_requirements_all.py run.
* Travis fixes.
* Configuration now validated.
* Split controller code to separate package.
* Replace in module docs with link to https://home-assistant.io .
* Correct component module path in .coveragerc.
More vals from const.py.
Use dict[key] for required config keys.
Check if credentials are correct during component setup.
Renamed add_devices to add_entities.
* Sensor/switch depends on ecoal_boiler component.
EcoalSwitch inherits from SwitchDevice.
Killed same as default should_poll().
Remove not neede schedule_update_ha_state() calls from turn_on/off.
* lint fixes.
* Move sensors/switches configuration to component setup.
* Lint fixes.
* Invalidating ecoal iface cache instead of force read in turn_on/off().
* Fail component setup before adding any platform entities.
Kill NOTE.
* Disallow setting entity names from config file, use code defined default names.
* Rework configuration file to use monitored_conditions like in rainmachine component.
* Killed pylint exception.
Log error when connection to controller fails.
* A few fixes.
* Linted.
* Preparing for transition to config flow
Added multiple gateway support
Reworked parameter flow to platforms to enable multiple controllers
Breaking change to config, now a list of gateways is expected instead of a single config
* Updated coveragerc
Added new location of fibaro component
* Fixes based on code review and extended logging
Addressed issues raised by code review
Added extended debug logging to get better reports from users if the device type mapping is not perfect
* Changhes based on code review
Changes to how configuration is read and schemas
Fix to device type mapping logic
* simplified reading config
* oops
oops
* grr
grr
* change based on code review
* changes based on code review
changes based on code review
* added components and requirement
* change config to allow the definition of multiple switches without redefining the gateway
* dont assume false state
fix default value
* added exclude to coveragerc
* sorted imports
* review fixes
* review fixes
* bugfix
review fixes
* review fix
* Improve Lutron RadioRA2 support, adding switch and scene support.
- Update the version of pylutron to 0.2 which has various bug fixes.
- Switch to pylutron's per-device subscribe
- Add switch support, and configure any non-dimmable output as a switch.
- Add scene support, using any configured keypad button with a corresponding LED as a scene.
* Fixes for comments in pull request home-assistant/home-assistant#18330
* More fixes for comments in pull request #18330
* Remove unused imports
* Cleanup in docstrings for Lutron scene support.
* Implement async_configure() method for ZHA entities.
Allow attribute reporting configuration to be stored as dict of zha
entity.
* Update ZHA platform to use new attribute reporting configuration.
* Use const declaration instead of magic numbers.
* Add support for manufacturer_id in ZCL attribute reporting configuration.
* Refactor async_configure() method.
Rename attribute reporting dict to zcl_reporting_config.
* WeMo - Various fixes and improvements
Various fixes & improvements to the WeMo components, including:
-- Fixes to rediscovery
-- New reset filter service for the WeMo Humidifier
-- Switched the remainder of the WeMo components to async IO
-- Removed any remaining IO in entity properties and moved them to the polling/subscription update process
* WeMo - Fix pywemo version and remove test code from WeMo fan component
* WeMo Humidifier - Add services.yaml entry for reset filter life service
* WeMo - Update binary_sensor component to use asyncio
* WeMo - Add available property to binary_sensor component
* WeMo - Fixed line length issue
* WeMo - Fix issue with discovering the same device multiple times
* WeMo - Fix for the fix for discovering devices multiple times
* WeMo - Fix long lines
* WeMo - Fixes from code review
* WeMo - Breaking Change - entity_ids is now required on wemo_set_humidity
* WeMo - Code review fixes
* WeMo - Code review fixes
* WeMo - Code review fixes
* move component to a package
* move TelldusLiveEntry to separate file
* refactor
* move entities from a shared container
* using the dispatch helper instead for communication between component and platforms
* updated covereagerc and codeowners
* suggestions from MartinHjelmare
* don't make update async
* "Strip is good!"
* Initial hlk-sw16 relay switch support
* remove entity_id and validate relay id's
* Bump hlk-sw16 library version and cleanup component
* refactor hlk-sw16 switch platform loading
* Use voluptuous to coerce relay id to string
* remove force_update for SW16Switch
* Move to callback based hlk-sw16 relay state changes
* fix hlk-sw16 default port and cleanup some unused variables
* Refactor to allow registration of multiple HLK-SW16 device
* Store protocol in instance variable instead of class variable
* remove is_connected
* flake8 style fix
* Move reconnect logic into HLK-SW16 client library
* Cleanup and improve logging
* Load hlk-sw16 platform entities at same time per device
* scope SIGNAL_AVAILABILITY to device_id
* Fixes for connection resume
* move device_client out of switches loop
* Add timeout for commands and keep alive
* remove unused variables
* Added lightwave components for switches and lights.
* Address warnings raised by Hound
* Correcting lint messages and major typo. This time tested before commit.
* Trying to fix author
* Minor lint changes
* Attempt to correct other lint error.
* Another lint attempt.
* More lint issues.
* Last two lint errors! Hurrah.
* Changes after review from fabaff.
* Moved device dependent code to PyPi.
* Replaced DEPENDENCIES with REQUIREMENTS
* Updated following code review from Martin Hjelmare.
* Added lightwave to requirements_all.txt
* Omit lightwave from tests.
* Updated requirements_all.txt
* Refactored how lightwave lights and switches load.
* Removed imports that were no longer required.
* Add guard for no discovery_info.
* Make it a guard clause and save indentation. Rename LRFxxx to LWRFxxx.
* Sorted imports to match style guidelines.
* Correct return value.
* Update requirements_all.txt
* Catch case where we have no lights or switches configured.
* Improve configuration validation.
* Restore states through a JSON store
* Accept entity_id directly in restore state helper
* Keep states stored between runs for a limited time
* Remove warning
* Added Fibaro omcponents
Added cover, light, sensor and switch components
* Improvements based on code review
Improvements based on code review
* Fixes based on code review
Fixes based on code review
* Changes to light behavior based on code review
Changes to light behavior based on code review
* Internal changes
Changed how brightness is represented internally.
It should have no impact on functionality.
* Initial stuff
* More work in place
* Starting with tests
* Device registry in place
* Hound
* Linting
* Member comments (including extracting device registry)
* Member comments (plus I forgot cleanup!)
* Hound
* More Hound
* Removed old import
* Adding config entry test to coverage
* Updated strings
* Adds support for Lupusec alarm control panel
* fixed various mostly cosmetic issues
* fixed generic type of binary sensors
* fixed some formatting; removed scan interval completely -> defaults now to 2 secs
* removed unused data caches; added check if binary sensor class exists
* cosmetics
* generic type fix
* small fix
* small fixes
* guard clause added
* small fixes
* Add additional property to HomeKitSwitch to show whether the Homekit outlet is in use or not
* Fix issues from review - Remove unused property, simplify and rename the device_state_attributes method
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
* First commit
* Feature complete?
* Add dependency
* Move setting poe mode logic to library
* Use guard clauses
* Bump requirement to 2
* Simplify saving switches with poe off
* Store and use poe mode
* Fix indentation
* Fix flake8
* Configuration future proofing
* Bump dependency to v3
* Add first test
* Proper use of defaults with config flow (thanks helto)
* Appease hound
* Make sure there can't be duplicate entries of combination host+site
* More tests
* More tests
* 98% coverage of controller
* Fix hound comments
* Config flow step init not necessary
* Use async_current_entries to check if host and site for controller is used
* Remove storing/restoring poe off devices to slim PR
* First batch of switch tests
* More switch tests.
* Small improvements and clean up
* Make tests pass
Don't name device in device registry
* Dont process clients that belong to non-UniFi POE switches
* Allow selection of site from a list in config flow
* Fix double blank lines in method
* Update codeowners
Stefan Burke
Paulus Schoutsen
Daniel Høyer Iversen
OleksandrBerchenko
emontnemery
MatteGary
Jc2k
Mateusz Korniak
Johann Kellerman
Andre Lengwenus
Rohan Kapoor
Robert Svensson
Aaron Bach
Otto Winter
David F. Mulcahey
pbalogh77
Jarle B. Hjortand
Sebastian Muszynski
Fabian Affolter
Rendili
Markus Ressel
Adam Belebczuk
Michael Dubno
sander76
cdheiser
Alexei Chetroi
javicalle
Fredrik Erlandsson
Ville Skyttä
Teemu R
James Hilliard
GeoffAtHome
Vladimir Eremin
Erik Eriksson
Adam Mills
damarco
mopolus
Jeff Wilson
majuss
Filip Bednárik
Anders Melchiorsen
Andy Castille
Nikolay Vasilchuk
Charles Garwood
Julius Mittenzwei
J4nsen
Daniel Shokouhi
Glenn Waters
zhumuht
marcolertora