* Update aioswitcher requirement to 2019.4.26.
* Removed unnecessary legacy function call.
* Fixed log message capital first letter.
* Replaced None argument with empty dict.
* Replaced guard.
* Added ServiceCallType.
* Added set_auto_off and update_device_name services to the component.
* Added test cases for service calls.
* Conditioned the component services registry with the platform discovery.
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Resolved change requests.
* Added ContextType.
* Addes permission verification for service calls.
* Added test cases for permision verification and more.
* Replaced POLICY_CONTROL with the more suited POLICY_EDIT.
* More appropriate function name.
* Added domain and entity_id validation for calling services.
* Removed service for setting the vendor's device name.
* Support ZLO device types
Support the device types that are added in https://github.com/zigpy/zigpy/pull/176
so newer Zigbee devices can be supported.
* Remove BINARY_SENSOR mappings
* Add back ON_OFF_LIGHT_SWITCH, DIMMER_SWITCH and COLOR_DIMMABLE_LIGHT
Since they are target devices I've added them as switch and lights,
which matches the Zigbee documentation.
* Upgrade to zigpy-homeassistant v0.5.0
To be able to use the new DeviceTypes
* Add APRS device tracker component
This component keeps open a connection to the APRS-IS infrastructure so
messages generated by filtered callsigns can be immediately acted upon.
Any messages with certain values for the 'format' key are position
reports and are parsed into device tracker entities.
* Log errors and return if startup failure
* Fix unit tests
* CREATE Somfy component
* CREATE cover Somfy platform
* USE somfy id as unique id
* UPDATE all the devices in one call to limit the number of call
* FIX Don't load devices if not yet configured
* IMP Replace configurator by a simple notification
* ADD log in case state does not match
* IMP wording
* REMOVE debug stuf
* ADD support for tilt position
* UPDATE requirements
* FIX Use code instead of authorization response
- Will allow to setup Somfy without https
* HANDLE stateless devices (Somfy RTS)
* FIX import locally 3rd party library
* UPDATE pymfy to 0.4.3
* ADD missing docstring
* FIX For Somfy 100 means closed and 0 opened
* FIX position can be None
* ENHANCE error management when error 500 occurs at setup
* FIX indent
* ROLLBACK tilt modification
- See https://community.home-assistant.io/t/somfy-tahoma-official-api/61448/90?u=tetienne
* FIX Look for capability instead of state
* DON'T use exception to test if a feature is available
* UPDATE dependency
* ADD device_info property
* AVOID object creation in each method
* REMOVE unused constants
* ADD missing doc
* IMP Only make one call to add_entities
* USE dict[key] instead of get method
* IMP Don't pass hass object to the entities
* FIX Don't end logging messages with period
* USE config entries instead of a cache file
* IMPLEMENT async_unload_entry
* CONSOLIDATE package
- see home-assistant/architecture#124
* UPDATE to pymfy 0.5.1
* SIMPLIFY config flow
* ADD French translation
* FIX 80 vs 79 max length
* ABORT flow asap
* FIX A tupple was returned
* MIGRATE to manifest.json
* ADD a placeholder async_setup_platform coroutine
- It's currently required and expected by the platform helper.
* FIX codeowner
* ADD missing translations file
* USE new external step
* UPGRADE pymfy version
* Close Somfy tab automatically
* ADD manufacturer
- Somfy only for the moment.
* HANDLE missing code or state in Somfy request
* REMOVE unused strings
* DECLARE somfy component to use config_flow
* APPLY static check remarks
* FIX async method cannot be called from sync context
* FIX only unload what has been loaded during entry setup
* DON't catch them all
* DON'T log full stacktrace
* ABORT conflig flow if configuration missing
* OMIT Somfy files for coverage
* ADD tests about Somfy config flow
* ADD pymfy to the test dependencies
* Improve amcrest error handling and bump amcrest package to 1.5.3
amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter.
Get rid of persistent_notification.
Errors at startup, other than login errors, are no longer fatal.
Display debug messages about how many times an error has occurred in a row.
Remove initial communications test. If camera is off line at startup this just delays the component setup.
Handle urllib3 errors when getting data from commands that were sent with stream=True.
If errors occur during camera update, try repeating until it works or the camera is determined to be off line.
Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions.
Make entities unavailable if too many errors occur in a row.
Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again.
Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.)
* Update per review comments
Remove max_errors and recheck_interval configuration variables and used fixed values instead.
Move definition of AmcrestChecker class to module level.
Change should_poll in camera.py to return a fixed value of True and move logic to update method.
* Add Streamlabs Water Monitor
* Fail Streamlabswater component setup when given invalid parameters
The Streamlabs Water component is unable to recover if it is given
an invalid API key or location id so this change is to ensure
we validate they are correct during setup and return a failure
if they are not.
* Prime Streamlabswater component sensors so data is available immediately
The sensors for the component were not causing an immediate load of
data from the API when being set up so there was some lag after
startup before values would show up. This change does an explicit
update when the sensors are setup to ensure data is viewable
immediately after startup.
* Switch Streamlabswater logging to use %s for string formatting
* Update Streamlabswater component with correct dependencies
Dependencies were incorrectly specified using DEPENDS rather
than DEPENDENCIES
* Streamlabswater pull request feedback
Remove detailed class docstrings since they're in the documentation,
reduce code duplication in sensor classes, and remove periods from
the end of log messages.
* Reduce line length in Streamlabswater sensor
* Add docstring on Streamlabswater service callback method
* Get rid of unnecessary initializers in Streamlabswater sensor
* Add manifest file for Streamlabs Water Monitor
* Remove unused REQUIREMENTS
* Added Google Cloud TTS service component feature
* Added Neutral voice gender
* Added line break at the end of files
* Updated CODEOWNERS, reqirements_all.txt and .coveragerc
* Fixed some ci/circleci: static-check errors
* Fixed some ci/circleci: static-check error
* Fixed some ci/circleci: pylint errors
* Fixed some ci/circleci: pylint errors
* * made supported_options const
* fixed direct env variable access
* Fixed import order
* * Component renamed
* Added encoding parameter
* Other fixes
* Changed folder name in .coveragerc
* * Removed whitespaces in blank lines
* Split long line
* Removed whitespaces in blank lines
* ci/circleci: static-check
* Fixed requirements_all.txt
* Added speed, pitch and gain parameters
* Added speed, pitch and gain as supported options
* Split too long line
* * Added profiles parameter
* Changed supported languages and encodings values
* Added parameters validations
* Fixes
* Fixes
* Fixes
* Fixes
* Fixes
* Changed options validation
* Added ToggleEntity save and restore state mechanism
* Revert "Added ToggleEntity save and restore state mechanism"
This reverts commit 0e275014
* Basic local SolarEdge monitoring for energy / power
* Basic local SolarEdge monitoring for energy / power
* generated CODEOWNERS, requirements, excluded tests
* generated CODEOWNERS, requirements, excluded tests
* lint fixes, etc
* lint fixes, etc
* Fix docstyle for init
Of course thats the file I forgot to run tests on
* Load all sensors by default
They use the same API endpoint. This changes was made per https://github.com/home-assistant/architecture/pull/244
* remve unneded date/time
* ran hassfest again
* add throttle when updating
* readd solax, mistakenly removed
* Update sensor.py
Paulus Schoutsen
Otto Winter
Ben Dews
David Bonnes
Jeff Irion
Anders Melchiorsen
Daniel Høyer Iversen
Aaron Bach
Tomer Figenblat
BackSlasher
ktnrg45
rolfberkenbosch
Guy Khmelnitsky
Andrey Kupreychik
cgtobi
Franck Nijhof
Paulus Schoutsen
Reinder Reinders
Jurriaan Pruis
Philip Rosenberg-Watt
tetienne
Miroslav Ždrale
Robbie Trencheny
Robert Svensson
Phil Bruckner
William Scanlon
Fabian Affolter
Daniel Perna
Andre Lengwenus
z0p
cpopp
Дубовик Максим
michaeldavie
Victor Cerutti
Oliver
David Roberts
Johan Bloemberg