* Add DROP integration
* Remove all but one platform for first PR
* Simplify initialization of hass.data[] structure
* Remove unnecessary mnemonic 'DROP_' prefix from DOMAIN constants
* Remove unnecessary whitespace
* Clarify configuration 'confirm' step description
* Remove unnecessary whitespace
* Use device class where applicable
* Remove unnecessary constructor and change its elements to class variables
* Change base entity inheritance to CoordinatorEntity
* Make sensor definitions more concise
* Rename HA domain from drop to drop_connect
* Remove underscores from class and function names
* Remove duplicate temperature sensor
* Change title capitalization
* Refactor using SensorEntityDescription
* Remove unnecessary intermediate dict layer
* Remove generated translations file
* Remove currently unused string values
* Use constants in sensor definitions
* Replace values with constants
* Move translation keys
* Remove unnecessary unique ID and config entry references
* Clean up DROPEntity initialization
* Clean up sensors
* Rename vars and functions according to style
* Remove redundant self references
* Clean up DROPSensor initializer
* Add missing state classes
* Simplify detection of configured devices
* Change entity identifiers to create device linkage
* Move device_info to coordinator
* Remove unnecessary properties
* Correct hub device IDs
* Remove redundant attribute
* Replace optional UID with assert
* Remove redundant attribute
* Correct coordinator initialization
* Fix mypy error
* Move API functionality to 3rd party library
* Abstract device to sensor map into a dict
* Unsubscribe MQTT on unload
* Move entity device information
* Make type checking for mypy conditional
* Bump dropmqttapi to 1.0.1
* Freeze dataclass to match parent class
* Fix race condition in MQTT unsubscribe setup
* Ensure unit tests begin with invalid MQTT state
* Change unit tests to reflect device firmware
* Move MQTT subscription out of the coordinator
* Tidy up initializer
* Move entirety of MQTT subscription out of the coordinator
* Make drop_api a class property
* Remove unnecessary type checks
* Simplify some unit test asserts
* Remove argument matching default
* Add entity category to battery and cartridge life sensors
* Skeleton for Vogel's MotionMount support.
* Generated updates.
* Add validation of the discovered information.
* Add manual configuration
* Use a mac address as a unique id
* Add tests for config_flow
* Add a 'turn' sensor entity.
* Add all needed sensors.
* Add number and select entity for control of MotionMount
* Update based on development checklist
* Preset selector now updates when a preset is chosen
* Fix adding presets selector to device
* Remove irrelevant TODO
* Bump python-MotionMount requirement
* Invert direction of turn slider
* Prepare for PR
* Make sure entities have correct values when created
* Use device's mac address as unique id for entities.
* Fix missing files in .coveragerc
* Remove typing ignore from device library.
Improved typing also gave rise to the need to improve the callback mechanism
* Improve typing
* Convert property to shorthand form
* Remove unneeded CONF_NAME in ConfigEntry
* Add small comment
* Refresh coordinator on notification from MotionMount
* Use translation for entity
* Bump python-MotionMount
* Raise `ConfigEntryNotReady` when connect fails
* Use local variable
* Improve exception handling
* Reduce duplicate code
* Make better use of constants
* Remove unneeded callback
* Remove other occurrence of unneeded callback
* Improve removal of suffix
* Catch 'getaddrinfo' exception
* Add config flow tests for invalid hostname
* Abort if device with same hostname is already configured
* Make sure we connect to a device with the same unique id as configured
* Convert function names to snake_case
* Remove unneeded commented-out code
* Use tuple
* Make us of config_entry id when mac is missing
* Prevent update of entities when nothing changed
* Don't store data in `hass.data` until we know we will proceed
* Remove coordinator
* Handle situation where mac is EMPTY_MAC
* Disable polling
* Fix failing hassfest
* Avoid calling unique-id-less discovery handler for situations where we've an unique id
* add config flow
* unit tests
* yaml config import flow
* change deprecation period and simply code
* keep name for legacy yaml
- removing the name now would break current implementations
- it will be removed together with the deprectation of yaml config flow
* improve error handling, simpler unique_id, cleanup
* simplify issues for yaml import flow
* improve typing and clean name handling
* streamline unit tests
- happy path + errors
- mock opendata instead of aiohttp
* parametrize unit tests
* improve strings
* add missing aborts
* update coverage ignore
* remove redundant test
* minor clean up of constants
* Add Valve integration.
This adds the valve integration discussed in https://github.com/home-assistant/architecture/discussions/975
Most of the code is taken from the cover integration but simplified since valves
can't tilt.
There are a couple outstanding errors I'm not sure how to solve and prevents
me from even making this commit without `--no-verify`.
* Apply PR feedback
* Apply more feedback: Intruduce the bare minimum
* Remove file commited by mistake
* Hopefully this fixes tests
* Match cover's typing and mypy settings
* Change some configuration files
* Fix test
* Increase code coverage a little
* Code coverate inproved to 91%
* 95% code coverage
* Coverate up to 97%
* Coverage 98%
* Apply PR feedback
* Even more feedback
* Add line I shouldn't have removed
* Derive closed/open state from current position
* Hopefully last feedback
* Update homeassistant/components/valve/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/valve/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Remove unnecesary translation
* Remove unused method arguments
* Complete code coverage
* Update homeassistant/components/valve/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Simplify tests
* Update homeassistant/components/valve/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Apply last feedback
* Update tests/components/valve/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/valve/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/testing_config/custom_components/test/valve.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* More feedback
* Apply suggestion
* And more feedback
* Apply feedback
* Remove commented code
* Reverse logic to unindent
* Update homeassistant/components/valve/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/valve/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Implement stop valve for Mock valve
* Fix tests now that I've implemented stop_valve
* Assert it's neither opening nor closing
* Use current position instead
* Avoid scheduling executor when opening or closing
* Fix incorrect bitwise operation
* Simplify toggle
* Remove uneeded partial functions
* Make is_last_toggle_direction_open private
* Remove valve from test custom integration
* Improve test coverage
* Address review comments
* Address review comments
* Address review comments
* Update homeassistant/components/valve/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Erik <erik@montnemery.com>
* Add config flow to Suez water
* fix tests
* Complete coverage
* Change version to 2024.7
* Fix final test
* Add issue when import is successful
* Move hassdata
* Do unique_id
* Remove import issue when entry already exists
* Remove import issue when entry already exists
* Add OSO Energy integration
* Add min/max for v40 level and bump pyosoenergyapi to 1.0.2
* OSO Energy address review comments
* Bump pyosoenergyapi to 1.0.3 and remove scan interval
* Remove unnecessary code
* Update homeassistant/components/osoenergy/__init__.py
Co-authored-by: Daniel Hjelseth Høyer <mail@dahoiv.net>
* Fixes to latest version
* Add support to set temperature
* Update homeassistant/components/osoenergy/config_flow.py
Co-authored-by: Daniel Hjelseth Høyer <mail@dahoiv.net>
* Fixes after review
* Remove unused code
* Add support for translations and modify services
* Apply suggestions from code review
Co-authored-by: Robert Resch <robert@resch.dev>
* Refactor services and constants according to the PR suggestions
* Remove unnecessary code
* Remove unused import in constants
* Refactoring and support for multiple instances
* Apply suggestions from code review
Co-authored-by: Robert Resch <robert@resch.dev>
* Refactor code and apply review suggestions
* Bump pyosoenergyapi to 1.0.5
* Remove services to reduce initial PR
* Remove extra state attributes and make OSO Entity generic
---------
Co-authored-by: Daniel Hjelseth Høyer <github@dahoiv.net>
Co-authored-by: Daniel Hjelseth Høyer <mail@dahoiv.net>
Co-authored-by: Robert Resch <robert@resch.dev>
* Add Holiday integration
* Localize holiday names
* Changes based on review feedback
* Add tests
* Add device info
* Bump holidays to 0.36
* Default to Home Assistant country setting
* Update homeassistant/components/holiday/calendar.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/holiday/calendar.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/holiday/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* black
* Move time
* Stop creating duplicate holiday calendars
* Set default language using python-holiday
* Use common translation
* Set _attr_name to None to fix friendly name
* Fix location
* Update homeassistant/components/holiday/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/holiday/calendar.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/holiday/calendar.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update tests/components/holiday/test_init.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* cleanup
* Set up the integration and test the state
* Test that configuring more than one instance is rejected
* Set default_language to user's language, fallback to country's default language
* Improve tests
* Update homeassistant/components/holiday/calendar.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Cleanup
* Add next year so we don't run out
* Update tests/components/holiday/test_init.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Cleanup
* Set default language in `__init__`
* Add strict typing
* Change default language: HA's language `en` is `en_US` in holidays, apart from Canada
* CONF_PROVINCE can be None
* Fix test
* Fix default_language
* Refactor tests
* Province can be None
* Add test for translated title
* Address feedback
* Address feedback
* Change test to use service call
* Address feedback
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Changes based on review feedback
* Update homeassistant/components/holiday/calendar.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/holiday/calendar.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add a test if next event is missing
* Rebase
* Set device to service
* Remove not needed translation key
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add Linear Garage Door integration
* Add Linear Garage Door integration
* Remove light platform
* Add tests for diagnostics
* Changes suggested by Lash
* Minor refactoring
* Various improvements
* Catch up to dev, various fixes
* Fix DeviceInfo import
* Use the HA dt_util
* Update tests/components/linear_garage_door/test_cover.py
* Apply suggestions from code review
---------
Co-authored-by: Robert Resch <robert@resch.dev>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Adding config flow and tests
* Removing update and adding to integrations.json
* Updating hassfest
* Removing comments
* Removing unique ID
* Putting the setup_platform out of order
* Adding feedback on issues and importing
* Removing uniqueID (again)
* Adjusting unload and typo
* Updating manifest properly
* Minor patching
* Removing hass.data.setdefault(DOMAIN, {})
* Moving load_platform to __init__.py
* Update homeassistant/components/fastdotcom/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/fastdotcom/strings.json
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/fastdotcom/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/fastdotcom/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Adding an unload function for the timer
* Adding issue on setup platform in sensor
* Update homeassistant/components/fastdotcom/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Removing platform
* Fixing strings.json
* Fine-tuning
* Putting back last_state
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* merge upstream
* Update homeassistant/components/weatherflow/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* feat: Removing unused keys
* feat: Addressing PR to remove DEFAULT_HOST from init
* feat: Addressing PR abort case
* feat: Ensure there is a default host always
* feat: Addressing PR comments and fixing entity names via local testing
* feat: Tested units
* feat: updated variable names to hopefully add some clarity to the function
* feat: added more var names for clarity
* feat: Fixed abort
* Update homeassistant/components/weatherflow/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* feat: Removed an unnecessary line
* feat: Test updates
* feat: Removed unreachable code
* feat: Tons of improvements
* removed debug code
* feat: small tweaks
* feat: Fixed density into HA Compatibility
* feat: Handled the options incorrectly... now fixed
* feat: Handled the options incorrectly... now fixed
* Update homeassistant/components/weatherflow/manifest.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Cleaned up callback in __init__
Cleaning up config_flow as well
* feat: Cleaned up a stupid test
* feat: Simulating a timeout event
* feat: Triggering timeout in mocking
* feat: trying to pass tests
* refactor: Moved code around so easier to test
* Update homeassistant/components/weatherflow/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* feat: Incremental changes moving along well
* feat: Last fix before re-review
* feat: Hopefully the tests shall pass
* feat: Remove domian from unique id
* feat: Fixed entity name
* feat: Removed unneeded lambda - to make thread safe
* Working version...
* working
* working
* feat: Remove tuff
* feat: Removed dual call
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* feat: updates based on pr
* feat: removed some self refrences
* feat: Mod RSSI
* feat: Removed the custom Air Density (will add in a later PR)
* feat: Significant cleanup of config flow
* feat: Reworked the configflwo with the help of Joostlek
* feat: Updated test coverage
* feat: Removing bakcing lib attribute
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* feat: Updated translations
* feat: Renamed CUSTOM to VOC
* feat: Extreme simplification of config flow
* feat: Pushing incremental changes
* feat: Fixing test coverage
* feat: Added lambda expressions for attributes and removed the custom AirDensity sensor
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* feat: Removed default lambda expression from raw_data_conv_fn
* feat: Added back default variable for lambda
* feat: Updated tests accordingly
* feat: Updated tests
* made sure to patch correct import
* made sure to patch correct import
* feat: Fixed up tests ... added missing asserts
* feat: Dropped model
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor: Updated code
* refactor: Removed commented code
* feat: close out all tests
* feat: Fixing the patch
* feat: Removed a bunch of stuff
* feat: Cleaning up tests even more
* fixed patch and paramaterized a test
* feat: Addressing most recent comments
* updates help of joostlek
* feat: Updated coverage for const
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* feat: Addressing more PR issues... probably still a few remain
* using const logger
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Add config flow to Hydrawise
* Raise an issue when a YAML config is detected
* Add a test for YAML import
* Add missing __init__.py
* Update CODEOWNERS
* Update requirements_test_all.txt
* Add config flow data to strings.json
* Hande scan_interval not being in YAML on import
* Fix requirements
* Update deprecation dates
* Update requirements_test_all.txt
* Changes from review
* Update homeassistant/components/hydrawise/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add already_configured to strings.json
* Add back setup_platform functions
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add back setup_platform
* Update requirements_test_all.txt
* Run black on hydrawise/*.py
* Add missing import of HOMEASSISTANT_DOMAIN
* Use more specific errors in config flow
* Add additional tests
* Update config flow to use pydrawise.legacy
* Re-work YAML deprecation issues
* Revert some changes to binary_sensor, as requested in review
* Changes requested during review
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Remove unused STE_USER_DATA_SCHEMA
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update comment in setup_platform
* Re-work the config flow again
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update tests
* Add back the _default_watering_timer attribute
* Bump deprecation dates
* Update requirements_test_all.txt
* Update CODEOWNERS
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Add ecoforest integration
* fix file title
* remove host default from schema, hints will be given in the documentation
* moved input validation to async_step_user
* ensure we can receive device data while doing entry setup
* remove unecessary check before unique id is set
* added shorter syntax for async create entry
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use variable to set unique id
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Use _attr_has_entity_name from base entity
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* remove unecessary comments in coordinator
* use shorthand for device information
* remove empty objects from manifest
* remove unecessary flag
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use _async_abort_entries_match to ensure device is not duplicated
* remove unecessary host attr
* fixed coordinator host attr to be used by entities to identify device
* remove unecessary assert
* use default device class temperature trasnlation key
* reuse base entity description
* use device serial number as identifier
* remove unused code
* Improve logging message
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Remove unused errors
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Raise a generic update failed
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use coordinator directly
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* No need to check for serial number
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* rename variable
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use renamed variable
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* improve assertion
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use serial number in entity unique id
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* raise config entry not ready on setup when error in connection
* improve test readability
* Improve python syntax
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* abort when device already configured with same serial number
* improve tests
* fix test name
* use coordinator data
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* improve asserts
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* fix ci
* improve error handling
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Switches via API
* Using external library
* UT and checlist
* Updating file .coveragerc
* Update homeassistant/components/switchbot_via_api/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/switchbot_via_api/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/switchbot_via_api/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Review fixes
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* This base class shouldn't know about Remote
* Fixing suggestion
* Sometimes, the state from the API is not updated immediately
* Review changes
* Some review changes
* Review changes
* Review change: Adding type on commands
* Parameterizing some tests
* Review changes
* Updating .coveragerc
* Fixing error handling in coordinator
* Review changes
* Review changes
* Adding switchbot brand
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Review changes
* Adding strict typing
* Removing log in constructor
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* New integration for Vodafone Station
* coveragerc
* Add ConfigFlow,ScannerEntity,DataUpdateCoordinator
* Introduce aiovodafone lib
* heavy cleanup
* bump aiovodafone to v0.0.5
* add config_flow tests (100% coverage)
* run pre-comimit scripts again
* Remove redundant parameter SSL
* rename and cleanup
* cleanup and bug fix
* cleanup exceptions
* constructor comment review
* improve test patching
* move VodafoneStationDeviceInfo to dataclass
* intriduce home field
* dispacher cleanup
* remove extra attributes (reduces state writes)
* attempt to complete test flow
* complete flow for test_exception_connection
* add comment about unique id
I picked up working on this integration because I wanted to make sure the new Bluetooth stack had a good test case to work out issues and did not generate unexpected breaking changes.
Since I do not use switchbot in production, I usually cannot help solve problems beyond the Bluetooth stack that is visible to HA.
While I am still happy to do code reviews here, the Bluetooth stack has matured to the point where watching for issues here is no longer helpful to maintaining the stack as the signal to noise ratio is too high
* ipma: remove abmantis from codeowners
I am not currently maintaining this integration.
* Run hassfest
* Try again
---------
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Add wake component
* Add wake support to Wyoming
* Add helper function to assist_pipeline (not complete)
* Rename wake to wake_word
* Fix platform
* Use send_event and clean up
* Merge wake word into pipeline
* Add wake option to async_pipeline_from_audio_stream
* Add start/end stages to async_pipeline_from_audio_stream
* Add wake timeout
* Remove layer in wake_output
* Use VAD for wake word timeout
* Include audio metadata in wake-start
* Remove unnecessary websocket command
* wake -> wake_word
* Incorporate feedback
* Clean up wake_word tests
* Add wyoming wake word tests
* Add pipeline wake word test
* Add last processed state
* Fix tests
* Add tests for wake word
* More tests for the codebot
* Create Opower integration
* fix tests
* Update config_flow.py
* Update coordinator.py
* Update sensor.py
* Update sensor.py
* Update coordinator.py
* Bump opower==0.0.4
* Ignore errors for "recent" PGE accounts
* Add type for forecasts
* Bump opower to 0.0.5
* Bump opower to 0.0.6
* Bump opower to 0.0.7
* Update requirements_all.txt
* Update requirements_test_all.txt
* Update coordinator
Fix exception caused by https://github.com/home-assistant/core/pull/92095
{} is dict but the function expects a set so change it to set()
* Improve exceptions handling
* Bump opower==0.0.9
* Bump opower to 0.0.10
* Bump opower to 0.0.11
* fix issue when integration hasn't run for 30 days
use last stat time instead of now when fetching recent usage/cost
* Allow username to be changed in reauth
* Don't allow changing username in reauth flow
* Migrate Linn / Openhome integration to SSDP config flow
* moved device initialisation into __init__
* wait for user step before adding openhome entities
* add CONFIG_SCHEMA
* cover confirmation step in config flow test
* Address comments
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Implemented Renson integration
* - renamed component to a better name
- Made cleaner code by splitting up files into different one
- Fixed issues regarding getting data from library
- Added service.yaml file
* Added Renson services
* cleanup translations
* added config_flow tests
* changed config_flow, removed all services
* use SensorEntityDescription + introduced new binarySensor
* fixed config_flow test
* renamed renson_endura_delta to renson
* refactored sensors and implemented binary_sensor
* Changed some sensors to non measurement and added entity_registery_enabled_default for config sensors
* Enabled binary_sensor
* changed import to new renamed module
* Merge files into correct files + cleaned some code
* Change use of EntityDescription
* Update codeowners
* Fixed lint issues
* Fix sensor
* Create test.yml
* Update test.yml
* add github action tests
* Format json files
* Remove deprecated code
* Update homeassistant/components/renson/binary_sensor.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use Coordinqte in Sensor
* Migrated binary sensor to use coordinate
* Removed firmwareSensor
* Add entity_catogory to binary_sensor
* Add services
* Revert "Add services"
This reverts commit 028760d8d8.
* update requirements of Renson integration
* Add services and fan
* Fixed some issue + fixed PR comments
* Cleanup code
* Go back 2 years ago to the bare minimum for PR approval
* Refactored code and added a lot of device classes to the entities
* Fix some bugs
* Add unique Id and some device class
* Show the level value for CURRENT_LEVEL_FIELD instead of the raw data
* Remove FILTER_PRESET_FIELD for now
* Make the _attr_unique_id unique
* Changed Renson tests
* Moved Renson hass data into @dataclass
* Changed test + added files to .coveragerc
* Add device_class=SensorDeviceClass.Duration
* Fix syntax
---------
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add discovergy integration
* Capitalize measurement type as it is in uppercase
* Some logging and typing
* Add all-time total production power and check if meter has value before adding it
* Add tests for Discovergy and changing therefor library import
* Disable phase-specific sensor per default, set user_input as default for schema and implement some other suggestions form code review
* Removing translation, fixing import and some more review implementation
* Fixing CI issues
* Check if acces token keys are in dict the correct way
* Implement suggestions after code review
* Correcting property function
* Change state class to STATE_CLASS_TOTAL_INCREASING
* Add reauth workflow for Discovergy
* Bump pydiscovergy
* Implement code review
* Remove _meter from __init__
* Bump pydiscovergy & minor changes
* Add gas meter support
* bump pydiscovergy & error handling
* Add myself to CODEOWNERS for test directory
* Resorting CODEOWNERS
* Implement diagnostics and reduce API use
* Make homeassistant imports absolute
* Exclude diagnostics.py from coverage report
* Add sensors with different keys
* Reformatting files
* Use new naming style
* Refactoring and moving to basic auth for API authentication
* Remove device name form entity name
* Add integration type to discovergy and implement new unit of measurement
* Add system health to discovergy integration
* Use right array key when using an alternative_key & using UnitOfElectricPotential.VOLT
* Add options for precision and update interval to Discovergy
* Remove precision config option and let it handle HA
* Rename precision attribute and remove translation file
* Some formatting tweaks
* Some more tests
* Move sensor names to strings.json
* Redacting title and unique_id as it contains user email address
* Add Dremel 3D Printer integration
* remove validators requirement
* ruff
* uno mas
* uno mas
* uno mas
* uno mas
---------
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Tom Harris <tomharris@harrisnj.net>
* Move constant values to separate file
* Move constant values to separate file
* Add config flow to lastfm
* Add tests
* Add config flow to lastfm
* Add tests
* Add tests
* Add tests
* Add extra form for main user and autofill with friends
* Add extra form for main user and autofill with friends
* Add extra form for main user and autofill with friends
* Add extra form for main user and autofill with friends
* Add OptionsFlow
* Add tests
* Fix feedback
* Fix feedback
* Fix feedback
* Fix feedback
* Fix test
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update config_flow.py
* Update config_flow.py
* Update config_flow.py
* Update homeassistant/components/lastfm/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add tests
* Cleanup
* Update config_flow.py
* Update config_flow.py
* Update config_flow.py
* Fix test
* Fix feedback
* Codeowner lastfm
* Fix feedback
* Fix feedback
* Parametrize errors
* Parametrize errors
* Parametrize errors
* Finish tests
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add new preset to Tado to enable geofencing mode
Add new 'auto' preset mode to enable Tado to be set to auto geofencing
mode. The existing ‘home’ and ‘away’ presets switched Tado into manual
geofencing mode and there was no way to restore it to auto mode.
Note 1: Since preset modes (home, away and auto) apply to the Tado home
holistically, irrespective of the Tado climate entity used to select
the preset, three new sensors have been added to display the state of
the Tado home
Note 2: Auto mode is only supported if the Auto Assist skill is enabled
in the owner's Tado home. Various checks have been added to ensure the
Tado supports auto geofencing and if it is not supported, the preset is
not listed in the preset modes available
* Update codeowners in manifest.json
* Update main codeowners file for Tado component
* Added new integration to support Electra Smart (HVAC)
* fixes + option to set scan interval
* renamed the module to electrasmart and added unittests
* added non tested files to .coveragerc
* changed the usage from UpdateCoordinator to each entity updates it self
* small fixes
* increased pypi package version, increased polling timeout to 60 seconds, improved error handling
* PARALLEL_UPDATE=1 to prevent multi access to the API
* code improvements
* aligned with the new HA APIs
* fixes
* fixes
* more
* fixes
* more
* more
* handled re-atuh flow
* fixed test
* removed hvac action
* added shabat mode
* tests: 100% coverage
* ran hassfest
* Update homeassistant/components/electrasmart/manifest.json
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Update homeassistant/components/electrasmart/manifest.json
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Update homeassistant/components/electrasmart/manifest.json
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Update homeassistant/components/electrasmart/climate.py
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* address Shay's comments
* address Shay's comments
* address more comments
---------
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Copy openai_conversation to google_generative_ai_conversation
This is to improve diff of the next commit with the actual implementation.
Commands used:
cp -r homeassistant/components/openai_conversation/ homeassistant/components/google_generative_ai_conversation/
cp -r tests/components/openai_conversation/ tests/components/google_generative_ai_conversation/
find homeassistant/components/google_generative_ai_conversation/ tests/components/google_generative_ai_conversation/ -type f | xargs sed -i \
-e 's@openai_conversation@google_generative_ai_conversation@g' \
-e 's@OpenAI Conversation@Google Generative AI Conversation@g' \
-e 's@balloob@tronikos@g'
* Add google_generative_ai_conversation to Google brand
* Google Generative AI Conversation
* Sync recent openai changes
* handle empty responses
* init setup of Anova Sous Vide
* bump anova-wifi to 0.2.4
* Removed yaml support
* Bump to anova-wifi 0.2.5
* Added support for adding sous vide while offline
* Added basic test for sensor
* added better tests for sensors and init
* expanded code coverage
* Decreased timedelta to lowest functioning value.
* Updating my username
* migrate to async_forward_entry_setups
* applying pr recommended changes
* bump anova-wifi to 0.2.7
* Improvements to hopefully get this review ready
* formatting changes
* clean ups for pr review
* remove unneeded unique id check.
* bump ao anova_wifi 0.3.0
* rename device_id to device_unique_id
* renamed to 'anova'
* added unique_id to MockConfigEntry
* removed leftover anova sous vides
* added device id to strings
* added error for incorrect device id
* add has_entity_name
* added attr name for tests
* added authentication functionality
* bump to 0.4.3
* split entity into its own class/object
* pulling firmware version out of async_setup
Co-authored-by: J. Nick Koston <nick@koston.org>
* addressed pr changes
* fixed pytest
* added anova data model
* removed unneeded time change
* add logging in package
* rework step_user
* Update homeassistant/components/anova/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Removed lower from attr unique id
Co-authored-by: J. Nick Koston <nick@koston.org>
* Removed unneeded member variables in sensor
Co-authored-by: J. Nick Koston <nick@koston.org>
* removed repeated subclass attr
Co-authored-by: J. Nick Koston <nick@koston.org>
* simplify update_failed test
* created descriptionentity
* bump to 0.6.1 limit ws connect
* add translation for sensor entities
* version bump - support pro model
* add anova to strict typing
* fixed sensor not getting datas type
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Check for new devices in init
* style changes
* return false instead of config entry not ready
* move serialize_device_list to utils
* move repeating device check into api
* moved unneeded code out of try except
* fixed tests to get 100% cov
* Update homeassistant/components/anova/strings.json
Co-authored-by: J. Nick Koston <nick@koston.org>
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* init roborock commit
* init commit of roborock
* removed some non-vacuum related code
* removed some non-needed constants
* removed translations
* removed options flow
* removed manual control
* remove password login
* removed go-to
* removed unneeded function and improved device_stat
* removed utils as it is unused
* typing changes in vacuum.py
* fixed test patch paths
* removed unneeded records
* removing unneeded code in tests
* remove password from strings
* removed maps in code
* changed const, reworked functions
* remove menu
* fixed tests
* 100% code coverage config_flow
* small changes
* removed unneeded patch
* bump to 0.1.7
* removed services
* removed extra functions and mop
* add () to configEntryNotReady
* moved coordinator into seperate file
* update roborock testing
* removed stale options code
* normalize username for unique id
* removed unneeded variables
* fixed linter problems
* removed stale comment
* additional pr changes
* simplify config_flow
* fix config flow test
* Apply suggestions from code review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* First pass at resolving PR comments
* reworked config flow
* moving vacuum attr
* attempt to clean up conflig flow more
* update package and use offline functionality
* Fixed errors and fan bug
* rework model and some other small changes
* bump version
* used default factory
* moved some client creation into coord
* fixed patch
* Update homeassistant/components/roborock/coordinator.py
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* moved async functions into gather
* reworked gathers
* removed random line
* error catch if networking doesn't exist or timeout
* bump to 0.6.5
* fixed mocked data reference url
* change checking if we have no network information
Co-authored-by: Allen Porter <allen.porter@gmail.com>
---------
Co-authored-by: Allen Porter <allen.porter@gmail.com>
Co-authored-by: Allen Porter <allen@thebends.org>
* Media playback working
* Working on OPUS audio
* Before rollback
* Fix is_end
* First working pipeline
* Clean up
* Remove asserts
* Send HA version in SDP
* Use async_pipeline_from_audio_stream
* Use config flow with allowed IP
* Satisfy ruff
* Remove use of regex for SIP IP
* Use voip-utils
* Fix imports
* Add Pipeline to __all__
* Fix voice assistant tests
* Basic VoIP test
* Run hassfest
* Generate requirements
* Bump voip utils (missing requirement)
* Allow tts_options to be passed in to pipeline run
* Add config flow tests
* Update test snapshots
* More tests
* Remove get_extra_info
* Appeasing the codebot
* Android TV Remote integration
* Add diagnostics
* Remove test pem files from when api was not mocked
* Address review comments
* Remove hass.data call in test
* Store the certificate and key in /config/.storage
* update comments
* Update homeassistant/components/androidtv_remote/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* import callback
* use async_generate_cert_if_missing
---------
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Initial commit
* Add websocket test tool
* Small tweak
* Tiny cleanup
* Make pipeline work with frontend branch
* Add some more info to start event
* Fixes
* First voice assistant tests
* Remove run_task
* Clean up for PR
* Add config_flow.py
* Remove CLI tool
* Simplify by removing stt/tts for now
* Clean up and fix tests
* More clean up and API changes
* Add quality_scale
* Remove data from run-finish
* Use StrEnum backport
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* TP-Link Omada integration
Support for PoE config of network switch ports
* Bump omada client version
* Fixing tests
* Refactored site config flow
* Code review comments
* Fixed tests and device display name issue
* Bump isort to fix pre-commit hooks
* Hassfest for the win
* Omada code review
* Black
* More config flow test coverage
* Full coverage for omada config_flow
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Add Thread integration
* Add get/set operational dataset as TLVS
* Add create operational dataset
* Add set thread state
* Adjust after rebase
* Improve HTTP status handling
* Improve test coverage
* Change domains from thread to otbr
* Setup otbr from a config entry
* Add files
* Store URL in config entry data
* Make sure manifest is not sorted
* Remove useless async
* Call the JSON parser more
* Don't raise exceptions without messages
* Remove stuff which will be needed in the future
* Remove more future stuff
* Use API library
* Bump library to 1.0.1
* redo Add sensor
* move back to ClientError
simplify washer_state
* Cleanup Sensor definitions
* Seperated EndTimeSensor
* Clean up WasherDryerTimeClass
* Start with Timestamp = None
* Clean up class description
* One more ClientError
* change to restore sensor
* Don't update when no state change
* Seperate washer tests
Add restore_state test
* Remove unused loop in washer sensor test
* No loops in sensor tests
* Remove unnecessary SensorTestInstance
* Added support for SwitchBot Lock
* Updated PySwitchbot to 0.32.1
* Updated .coveragerc
* Removed unnecessary condition
* Using library method to verify encryption key
* Added config flow tests
* Remove link from config flow description
* Added one more test for config flow
* Updated CODEOWNERS
* Bump pyrainbird to 0.7.0 and move to async library
* Share updates across sensors
* Fix test version and delete dead code
* Add test coverage for yaml configuration
* Address PR feedback
* Copy google_sheets to google_assistant_sdk
This is to improve diff of the next commit with the actual implementation.
Commands used:
cp -r homeassistant/components/google_sheets/ homeassistant/components/google_assistant_sdk/
cp -r tests/components/google_sheets/ tests/components/google_assistant_sdk/
find homeassistant/components/google_assistant_sdk/ tests/components/google_assistant_sdk/ -type f | xargs sed -i \
-e 's@google_sheets@google_assistant_sdk@g' \
-e 's@Google Sheets@Google Assistant SDK@g' \
-e 's@tkdrob@tronikos@g'
* Google Assistant SDK integration
Allows sending commands and broadcast messages to Google Assistant.
* Remove unnecessary async_entry_has_scopes check
* Bump gassist-text to fix protobuf dependency
* Add matter base (#79372)
Co-authored-by: Marcel van der Veldt <m.vanderveldt@outlook.com>
* Add matter server add-on flow (#82698)
* Add matter server add-on flow
* Fix stale error argument
* Clean docstrings
* Use localhost as default address
* Add matter websocket api foundation (#82848)
* Add matter config entry add-on management (#82865)
* Use matter refactored server/client library (#83003)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump python-matter-server to 1.0.6 (#83059)
* Extend matter websocket api (#82948)
* Extend matter websocket api
* Finish docstring
* Fix pin type
* Adjust api after new client
* Adjust api to frontend for now
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Added initial files for air-Q integration
* Allow FIXME comments in pylint (temporary)
Also reintroduce --ignore-missing-annotations=y
* Set up air-q entry to connect to aioairq's API (initial attempt)
Also add necessary constants
* Implement a class for sensors and its update logic
Very early stage, WIP
* Zeroconf and authentication are working
* Complete the bare-bone minimal working version
Specifically, make AirQSensor update its values.
* Handle invalid authentication gracefully
* Handle ClientConnectionError gracefully
* Add field hint for the login form
The key in the schema, which defines the form in
`ConfigFlow.async_show_form` is looked up in both `airq/strings/json`
and `airq/translations/en.json`. I am still not 100% sure how this
lookup is performed. WIP
* Minor cleanups
* Extend sensor list to all supported by SensorDeviceClass
Also manage warming up sensors
* aioairq is published to PyPI and mentioned in requirements
* Reordered constants and list content alphabetically
As required by style guides. Also turned SENSOR_TYPES to a list
* Updated file docstrings for a dev unfamiliar w/homeassistant like myself
* Adding a bit of logging for the integration setup process
* Expose scan interval & smoothing flag
Also streamline test_authentication in config_flow.
* Fix a type annotation mistake
* Use as many constants from homeassistant.const as possible
My only concern is using CONST_IP_ADDRESS = "ip_address" for smth which
stands for both IP address and mDNS...
* Temporarily rollback ConfigFlow.async_step_configure and use defaults
TODO: implement OptionFlowHandler instead
* Define custom Coordinator, w subset of airq config
The latter is then accessed from entity / sensor constructors to define
correct DeviceInfo
* Provide translations to de & fr + minor changes to en
* Provide translations to ru + a minor en changes
* Make translation a little more helpful and polite
* Fix devicename and entry title
* Remove stale commented out code
* Test config_flow
At this point two helper functions which interact with the external
library are not tested
* Clean up unrelated and meant as temporary changes
* Clean up unnecessary comments meant for internal use
* Move fetching config to a dedicated async coordinator method
As opposed to it being a potentially poorly justified step in
async_setup_entry
* Remove zeroconf support since it is not yet ready
* Remove translations other than en
* Remove unnecessary comments, manifest.json entries, and constants
* Improve exception handling
- `_LOGGER` uses `debug` and not `error` levels.
- Drop `ClientConnect` and catch `aiohttop.ClientConnectError` directly
- Drop `Exception` as it is not expected from `aioairq` (remove the
corresponding test too)
* Drop strings for obsolete errors and steps
Specifically, `unknown` error isn't caught any more. `configure` step
has also been removed.
* Refactor en.json to be consistent with strings.json
* Move target_route from a coordinator argument to a constant
At this point a user cannot configure the target_route route, thus it
does not make sense to expose it half-heartedly in
`AirQCoordinator.__init__`, since it cannot be accessed.
* Fix an async call in `AirQCoordinator.async_setup_entry`
* Refactor underlying aioairq API
- Use `homeassistant.helpers.aiohttp.async_get_clientsession` and pass a
single persistent session to `aioariq.AirQ.__init__`
- `aioairq.AirQ.fetch_device_info` now returns a `DeviceInfo` object heavily
inspired and almost compatible with `homeassistant.helpers.entity.DeviceInfo`.
Make heavier use of this object and define a single `DeviceInfo` in the
`AirQCoordinator` (instead of recreating the same object for each sensor
of the device in `sensor.AirQSensor`)
- Drop two helper functions in `config_flow.py` and operate on `aioariq.AirQ`
methods directly
* Fix the version of aioairq
* Add 15 more sensors + icons
* Remove cnt* & TypPS, change units of health & performance
* Add 12 more sensors
* Add a missing icon
* Gracefully handle device not being available on setup
If the device and the host are not on the same WiFi,
ServerTimeoutError is raised, which is caught by
ClientConnectionError.
If the device is powered off, ClientConnectionError is expected.
In both cases, ConfigEntryNotReady is raised, as prescribed by the docs.
Newer version of aioairq times-out far quicker than the default 5 mins.
* Rename two sensors
* Validate provided IP address / mDNS
aioairq now raises InvalidInput if provided IP / mDNS does not seem
valid. Handle this exception correctly
* Apply suggestions from code review
Clean up the comments and rename the logger
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during the first refresh
- Fetched info is stored in AirQCoordinator.device_info.
- In `AirQSensor.native_value` only multiply by the factor if
the sensor reading is not None
- Fix the tests for ConfigFlow for aioairq==0.2.3. Specifically
make the dummy data pass the new validation step upstream
+ add a test which fails it
* Drop custom device classes for now
* Apply suggestions from code review
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during ConfigFlow.async_step_user
Store the result obtained by `airq.fetch_device_info` it in
`config_entry.data`. Pass the entire config entry to `AirQCoordinator`
and build the entire `homeassistant.helpers.entity.DeviceInfo` in the
`AirQCoordinator.__init__`. This makes
`AirQCoordinator._async_fetch_device_info` and overloaded
`AirQCoordinator._async_config_entry_first_refresh` obsolete.
Bump aioairq version.
Turn update_interval from `AirQCoordinator.__init__` argument into a
contestant.
* Custom entity description exposing a hook to modify sensor value
Use a `AirQEntityDescription` with a callable `value_fn` which allows to
change the sensor value retrieved from the device. Note that the
callable does not handle data retrieval itself (even from
`coordinator.data`). Instead it is purely a hook to transform obtained
value.
* Avoid duplicated use of unique_id
Device info is fetched during the `ConfigFlow.async_user_step`.
`unique_id` is taken from the device info and is **not** stored
in `config_entry.data`. Subsequently `config_entry.unique_id` is
used instead.
* Drop unnecessary try-except
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Clarify the use of value_transform_fn
* Refactor the use of lambdas in AirQEntityDescription
Now it is the job of the callable under `value` to get the sensor
reading from the coordinator's data. Factoring this functionality into a
callback decouples the key of the description from the key of dict,
returned by the API, so `AirQEntityDescription` no longer requires its key
to be set to smth clearly internal (e.g. `nh3_MR100`).
* Use a callback to update native_value
Since all `native_value`s are updated synchronously, it can as well be
done in a callback for better state consistency (right?)
* Revert the description keys to match data keys
Must match given the current way of identifying available sensors. On a
broader scale, they must match to be able to relate the descriptions to
sensors, unless a separate lookup table is maintained.
* Reduce number of loops when adding sensors
Filtering warming up sensors and non-sensor keys can be combined with
adding entities.
* Remove obsolete imports
* Update integrations.json
* Add integration_type
Integration supports multiple devices => hub
Co-authored-by: dl2080 <daniel.lehmann@runbox.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
Co-authored-by: Daniel Lehmann <43613560+dl2080@users.noreply.github.com>
Co-authored-by: Martin Selbmann <job@martin-selbmann.de>
* mapping
* update
* working
* tests
* fixes
* temp add binary sensor platform to make sure it works
* fixes
* 100% cover
* adjust
* disable chatty sensors by default
* remove binary sensor_platform for next PR
* time is much nicer than counter
* Bump btsmarthub_devicelist
This PR bumps the btsmarthub_devicelist version to correct an issue
experienced by a recent firmware upgrade to the SmartHub2.
* Bump btsmarthub_devicelist to 0.2.3
This version bump fixes an issue where BT SmartHub2 devices cannot be
correctly autodetected. The current workaround is to specifiy it
manually, which isn't great UX (and did previously work until a recent
firmware upgrade).
I've also taken the opportunity to reassign ownership of the component
to myself as @jxwolstenholme no longer has a SmartHub so cannot do
manual testing and also has no need to use the component anymore.
* Add Config Flow to APCUPSd integration and remove YAML support.
* Hide the binary sensor if user does not select STATFLAG resource.
* Add tests for config flows.
* Simplify config flow code.
* Spell fix.
* Fix pylint warnings.
* Simplify the code for config flow.
* First attempt to implement import flows to suppport legacy YAML configurations.
* Remove unnecessary log calls.
* Wrap synchronous update call with `hass.async_add_executor_job`.
* Import the YAML configurations when sensor platform is set up.
* Move the logger call since the variables are not properly set up.
* Add codeowner.
* Fix name field of manifest.json.
* Fix linting issue.
* Fix incorrect dependency due to incorrect rebase.
* Update codeowner and config flows via hassfest.
* Postpone the deprecation warning to 2022.7.
* Import future annotations for init file.
* Add an newline at the end to make prettier happy.
* Update github id.
* Add type hints for return types of steps in config flow.
* Move the deprecation date for YAML config to 2022.12.
* Update according to reviews.
* Use async_forward_entry_setups.
* Add helper properties to `APCUPSdData` class.
* Add device_info for binary sensor.
* Simplify config flow.
* Remove options flow strings.
* update the tests according to the changes.
* Add `entity_registry_enabled_default` to entities and use imported CONF_RESOURCES to disable entities instead of skipping them.
* Update according to reviews.
* Do not use model of the UPS as the title for the integration.
Instead, simply use "APCUPSd" as the integration title and let the device info serve as title for each device instead.
* Change schema to be a global variable.
* Add more comments.
* Rewrite the tests for config flows.
* Fix enabled_by_default.
* Show friendly titles in the integration.
* Add import check in `async_setup_platform` to avoid importing in sensor platform setup.
* Add import check in `async_setup_platform` to avoid importing in sensor platform setup.
* Update comments in test files.
* Use parametrize instead of manually iterating different test cases.
* Swap the order of the platform constants.
* Avoid using broad exceptions.
* Set up device info via `_attr_device_info`.
* Remove unrelated test in `test_config_flow`.
* Use `DeviceInfo` instead of dict to assign to `_attr_device_info`.
* Add english translation.
* Add `async_create_issue` for deprecated YAML configuration.
* Enable UPS status by default since it could show "online, charging, on battery etc" which is meaningful for all users.
* Apply suggestions from code review
* Apply suggestion
* Apply suggestion
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Add nibe local integration
* Add sensor platform
* Enable sensor platform
* Fix manifest
* Correct domain after rename
* Adjust tests for rename
* Correct codeowners
* Add requirements for tests
* Grab coil by name
* Switch to home assistant error
* Config entry always exist
* Switch to create task
* Bump to 0.5.0
* Use new coils access
* Remove unneeded check
* Use single instance of logger
* Test invalid ip
* Don't allow coil to be None
* Remove sleep
* Initialize data in coordinator init
* Add utils to ignore
* Update homeassistant/components/nibe_heatpump/manifest.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Use generator instead
* Use tenacity as retry decorator
* Use package instead of name to get logger
* Skip broad exception handling
* Catch missing coil exception
* Add missing test
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* fixes
* restored new line in .coveragerc
* test: increased config_flow test coverage
* removed two way type
* Updated CODEOWNERS
* fix: code review comments
* fixed review comments
* added device_info
* moved device info to attribute
* Initial version of Nobø Ecohub.
* Options update listener for Nobø Ecohub
* Unit test for nobo_hub config flow
* Cleanup
* Moved comment re backwards compatibility
* Improved tests
* Improved tests
* Options flow test
Pylint
* Fix backwards compatibility mode
* Don't require Python 3.9
* Import form configuration.yaml
* Check if device is already configured.
Correct tests for only discovering serial prefix
Fix importing when only serial suffix is configured
* Use constants
* Pylint and variable name clenaup.
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Fix tests
* Correct disabling off_command and on_commands ("Default" is a hard coded week profile in the hub).
* Improve options dialog
* Configure override type in options dialog
* Formatting
* pyupgrade
* Incorporated review comments
* Incorporated review comments.
* Incorporated second round of review comments.
* Add polling to discover preset change in HVAC_MODE_AUTO.
* Added tests/components/nobo_hub to CODEOWNERS.
* Update homeassistant/components/nobo_hub/config_flow.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Update homeassistant/components/nobo_hub/climate.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Simplify if tests.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Separate config step for manual configuration.
* Fixed indentation
* Made async_set_temperature more robust
* Thermometer supports tenths even though thermostat is in ones.
* Preserve serial suffix in config dialog on error.
* Initial version of Nobø Ecohub.
* Improved tests
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Configure override type in options dialog
* Separate config step for manual configuration.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Formatting (prettier)
* Fix HA stop listener.
* Review
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Review
- Removed workaround to support "OFF" setting.
- Simplified config flow to add a new device.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fixed review comments
* Update en.json with correction in review.
* Implemented review comments:
- Register devices
- Simplifed async_set_temperature
* Register hub as device in init module
* Implemented review comments.
Upgraded pynobo to 1.4.0.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Avoid tacking on the device name in the entity name
* Inherit entity name from device name
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Allen Porter <allen.porter@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Floris272
Patrick Frazer
ashionky
RJPoelstra
Cyrill Raccaud
Niklas Wagner
Jan-Philipp Benecke
Sid
Miguel Camba
Franck Nijhof
Joost Lekkerkerker
Brett Adams
Lucas Mindêllo de Andrade
Viktor Andersson
Brandon Rothweiler
osohotwateriot
Jan Rieger
cdnninja
Jonas Fors Lellky
fwestenberg
Teemu R
ufodone
On Freund
Isak Nyberg
Malene Trab
IceBotYT
Martin Hjelmare
Erwin Douna
J. Nick Koston
Mark Coombes
Michael
Arie Catsman
Chris Straffon
Kevin Stillhammer
mkmer
Alex Tsernoh
sdb9696
Christopher Fenner
Diogo Gomes
Luke Lashley
Robert Van Gorkom
TheJulianJES
Allen Porter
Raman Gupta
Erik Montnemery
Matthias Alphart
Xitee
G Johansson
Guy Shefer
Tobias Sauerwein
Michael Thingnes
Shay Levy
Jeef
Edouard Lafargue
David Knowles
Pedro Januário
Fletcher
Jan-Philipp Benecke
Abílio Costa
jan iversen
Ravaka Razafimanantsoa
Marty Sun
Olen
John Hollowell
Niels Perfors
TJ Horner
Tony
Ståle Storø Hauknes
Jc2k
Paarth Shah
Keith Burzinski
Maciej Bieniek
Ian Foster
Simone Chemelli
Michael Arthur
Michael Hansen
Charles Garwood
epenet
Maikel Punie
Joakim Plate
tronikos
cpolhout
disforw
Barry Williams
jimmyd-be
Paul Frank
Rami Mosleh
Robert Hillis
Álvaro Fernández Rojas
chiefdragon
Aaron Bach
Jafar Atili
andarotajo
Artem Draft
Steve Easley
Tomer Figenblat
Jan Bouwhuis
Pablo Estevez
Christopher Bailey
Bouwe Westerdijk
Jan Čermák
dougiteixeira
Avi Miller
Hans Oischinger
luar123
Chris Xiao
Thijs W
Mark Adkins
Felix Rotthowe
Emory Penney
Thomas Dietrich
David Bonnes
Thomas Hollstegge
Marc-Olivier Arsenault
MarkGodwin
Nathan Spencer
Klaas Schoute
Paulus Schoutsen
Dan Simpson
mkmer
Brandon Rothweiler
Poltorak Serguei
Jack Boswell
930913
Aarni Koskela
Koen van Zuijlen
starkillerOG
Lukas Barth
Damian Sypniewski
PierreAronnax
Nyro
Sean Chen
Marcel van der Veldt
north3221
cdheiser
Jon Gilmore
StefanIacobLivisi
tstabrawa
Renat Sibgatulin
aschmitz
Daniel Gangl
mtdcr
PeteRager
Austin Brunkhorst
Steven Looman
Chris Talkington
Matthew Simpson
Vincent Giorgi
Yuxin Wang
Tom Puttemans
HarvsG
spycle
Ernst Klamer
Sergio Conde Gómez
Alex Thompson
Øyvind Matheson Wergeland