* * Rename input_slider to input_number
* Update input_number to optionally display slider, input box, or both
* input_number support either input box or slider mode, but not both
* input_number : change service from select_value to set_value
* input_number : add test for mode setting to tests
* Added hysteresis attribute to threshold binary sensor
* Added threshold binary sensor hysteresis test case
* Changed threshold binary sensor property name to be more self explanatory
* Pulled default hysteresis value into top level declaration
* Fixed linter errors
* Fixed additional linter errors
* Move comment to docs
* New climate platform with MQTT
* Use STATE_OFF
* Basic tests for climate.mqtt
* lint
* actualy collect coverage
* First tests and fixes
* Add possibility to receive temperature via MQTT
* Require only either sensor or mqtt topic
* Add mqtt publishing for away mode, hold mode and aux heat.
* Use configurabe on/off payloads
* Add pessimistic mode
* Initialize aux and away with False instead of None
* Remove Sensor
* Use correct scheduling method
* Move all methods to coroutines
If an event contained a datetime.datetime object it would cause an
exception in the Splunk component. Most of the media_player
components do this in their `media_position_updated_at` attribute.
Use the JSONEncoder from homeassistant.remote instead of just using the
standard json.dumps encoder.
Fixes#9590
* Fixed away_mode for Ecobee thermostat. Now away mode is properly turned on using indefinite away hold.
* fixed lint warnings
* fixed lint warnings
* - now it is possible to use float values for ecobee temperature holds
- fixed a bug that caused an exception when temperature hold was set in away mode
- added unit tests for ecobee thermostat
* fixed lint errors
* fixed lint errors
* - Rewrite synology camera by intruducing Api and SurveillanceStation classes to get cameras, motion settings, enable/disable motion detection, etc ...
- Synology camera now shows correct state based on is_recording and is_streaming flag. Also it now supports enable / disable motion detection and show the correct motion detection status
- Newly added Api and SurveillanceStation classes will be moved to a lib but it's here just for review
* - Updated how payload are merged with kwargs so it works with python <3.5
* - Fixed class name conflict
* - Addressed flake8 error
* - Addressed pylint error
* - Moved synology API related code to py-synology lib
- Added py-synology==0.1.1 requirement
- Removed hass from SynologyCamera constructor
* - Updated requirements_all.txt
* - renamed variable back to original
* - Sync call to retrieve camera image should be done in camera_image() instead
* - Sync call to update camera info should be done in update() instead
* - Removed unused import
* Introducing support to Melnor RainCloud sprinkler systems
* Make monitored_conditions optional for sub-components
* Part 1/2 - Modified attributes, added DATA_ constant and using battery helper
* Part 2/2 - Refactored self-update hub
* Fixed change requested:
- Dispatcher signal connection
- Don't send raincloud object via dispatcher_send()
- Honoring the dynamic scan_interval value on track_time_interval()
* Inherents async_added_to_hass() on all device classes
* Makes lint happy
* * Refactored RainCloud code to incorporate suggestions.
Many thanks to @pvizelli and @martinhjelmare!!
* Removed Entity from RainCloud sensor and fixed docstrings
* Update raincloud.py
* Update raincloud.py
* fix lint
* second try on rflink / cover
* no newline at end of file
* changed entity
* fixed comments from pvizeli
* removed :
* removed return 'unknown'
* Fixed comments from Rytilahti
* removed newline
* Reverted to None
* cleanup
* Cleanup
* Initial proposal for the input_datetime
* Linting
* Further linting, don't define time validation twice
* Make pylint *and* flake8 happy at the same time
* Move todos to the PR to make lint happy
* Actually validate the type of date/time
* First testing
* Linting
* Address code review issues
* Code review: Remove forgotten print()s
* Make set_datetime a coroutine
* Create contains_at_least_one_key_value CV method, use it
* Add timestamp to the attributes
* Test and fix corner case where restore data is bogus
* Add FIXME
* Fix date/time setting
* Fix Validation
* Merge date / time validation, add tests
* Simplify service data validation
* No default for initial state, allow 'unknown' as state
* cleanup
* fix schema
* IMAP Unread sensor updated for async and push
* Implement renames suggested in review
* Use async_timeout
* Keep push capability in a variable
* Reword for Hound
* allow customizable action for webos tv turn on as not all models allow for WOL
* trying to fix the houndci-bot
* last few fixes hopefully
* I guess not
* last time!
* This is a breaking change. I have removed the build-in wake-on-lan functionality and have opted for a script which can be a wake-on-lan switch. I have also removed any reference to wol.
* hoping to fix formatting
* linter errors
* Increase Comed timeout since it sometimes takes a long time for the API to respond
* Rewrite ComEd sensor to use asyncio
* Fix whitespace and build issues
* Added new statistic attributes
Added new attributes:
- Cleaning count
- Total cleaning time
- Total cleaning area
- Time left to change main brush, side brush and filter
* Code corrections
Code corrections
* Remove wronge hanging indentation
* Added new attributes
ATTR_MAIN_BRUSH_LEFT
ATTR_SIDE_BRUSH_LEFT
ATTR_FILTER_LEFT
ATTR_CLEANING_COUNT
ATTR_CLEANED_TOTAL_AREA
ATTR_CLEANING_TOTAL_TIME
* Remove trailing white space
* Corrections of the unit test for new attributes
* Hound corrections
* Init self.clean_history, self.consumable_state
* Hound correction
* - Cleaning time and total cleaning time shown in minutes
- Cleaned area and total cleaned area shown in square meters
- Main brush left, side brush left, filter left time shown in hours
- Display of the unit of measurement
* Remove trailing white spaces
* Fixed wrong continued indentation
* Fixed Hound
* Fixed Hound
* Added new statistic attributes
Added new attributes:
- Cleaning count
- Total cleaning time
- Total cleaning area
- Time left to change main brush, side brush and filter
* Code corrections
Code corrections
* Remove wronge hanging indentation
* Init self.clean_history, self.consumable_state
* Hound correction
* Remove UOM
* Merge
* Init self.clean_history, self.consumable_state
* Hound correction
* Init self.clean_history, self.consumable_state
* Hound correction
* Removed double declarations
* MQTT Cover - Add availability_topic for online/offline status
Added topic, configurable payloads, and tests.
* Merge branch 'dev' into mqtt-cover-availability
* Revert "Merge branch 'dev' into mqtt-cover-availability"
This reverts commit 46d29794ba.
* Added newline at end of test_mqtt.py
* Fixed lint issue (newline at EOF)
* Fixed lint issue (newline at EOF)
* Updated call signature for other tests
* Fixed availability message callback
* - Added support for ARM_NIGHT for manual_mqtt alarm
* - port "Add post_pending_state attribute to manual alarm_control_panel #9291" to manuql_mqtt
* - port "Fixed manual alarm not re-arm after 2nd trigger #9249" to manuql_mqtt
* - port "Add manual alarm_control_panel pending time per state #9264" to manuql_mqtt
* - Updated test_trigger_with_specific_pending to simulate real scenario e.g. arm the system then trigger
* new geo rss events sensor
* SCAN_INTERVAL instead of DEFAULT_SCAN_INTERVAL
* removed redefinition CONF_SCAN_INTERVAL
* definition of self._name not required
* removed unnecessary check and unnecessary parameter
* changed log levels
* fixed default name not used
* streamlined sensor name and entity id generation, removed unnecessary parameter
* fixed issue for entries without geometry data
* fixed tests after code changes
* simplified code
* simplified code; removed unnecessary imports
* fixed invalid variable name
* shorter sensor name and in turn entity id
* increasing test coverage for previously untested code
* fixed indentation and variable usage
* simplified test code
* merged two similar tests
* fixed an issue if no data could be fetched from external service; added test case for this case
* Add support for multi-entity recent fetch of history. Add graph component
* Rename graph to history_graph. Support fast fetch without current state.
* Address comments
With this optimization we can send a single UDP packet to the light rather
than one packet per zone (up to 80 packets for LIFX Z). This removes a
potential multi-second latency on the frontend color picker.
* MQTT Binary Sensor - Add availability_topic for online/offline status
Added topic, configurable payloads, and tests.
* Relocated state subscribe function
Moved state subscribe function to follow the state listener function.
* Add reload service
* add reload test
* Use global variable
* remove white space ....
* adjust as suggested
* remove annoying white space....
* fix travis
* fix travis, again
* rename Load_scripts to Discover_scripts
Travis complains that "Load_scripts" is an invalid name (I don't know why)
* Update python_script.py
This gets displayed when clicking on the binary sensors. It is
useful to distinguish different devices with the same name (e.g.
the room name) but different types.
The aiolifx 0.6.0 release fixes an issue where an effect color could
remain set after stopping the effect. This only affected multi-zone
lights (i.e. LIFX Z) and only if the effect was stopped by setting
the light brightness or the color (but not both).
The aiolifx 0.6.0 release also defaults end_index to start_index+7,
so we can remove that argument.
Finally, aiolifx_effects 0.1.2 adds support for aiolifx 0.6.0.
* renamed add_devices to async_add_devices according to hass naming scheme
* replaced some occurencies of async_add_entites to async_add_devices
* fixed unit test
* fixed unit test
* Bump Axis requirement to v10
Fix issues related to non JSON serializable items and recorder component (8297)
Add support to configure HTTP port (8403)
* Changed local port definition to CONF_PORT
* On request config is now sent to the camera platform as well, and in order better explain what is what the old internal config is now device_config and hass own config is the only one referenced as config
* Missed to add device_config to setup in discovered device
* Bump to V12 that has got a dependency fix
* Update requirements_all
* Add port configuration to automatically discovered devices
Allow setup to pass without Axis being configured in configuration.yaml
* Added satel_integra alarm panel and binary sensor platform
* Fixed several issues after review: import cleanup, reduced messaging levels to debug, other.
* Fixes after review: removed dead code, improved loop, sorted imports.
* Changes after review, not yet working
* Changes after review - wrapped async code, killed ensure_future, moved async_load_platform into jobs
* Updated to latest AbodePy version. Added services and events. Added new device types. Added exclude, light, and polling config options.
* Disable the event service if polling is enabled.
* Addressed all CR's
* Removed duplicated super call.
* Name config option now used. Removed deprecated DEFAULT_NAME.
* Modified partial to move event to first param.
* Configuration parameter "host" introduced. Will skip the discovery of the host.
* Provide a proper default port. Log message reformatted.
* PyXiaomiGateway version bumped: The new feature was introduced with v0.4.0.
* requirements_all.txt updated.
* Native default for config parameter used.
BioSehnsucht
FletcherAU
Alan Fischer
Adam Mills
Mister Wil
Alok Saboo
Jeroen ter Heerdt
Matt White
Fabian Affolter
Sam Birch
Vignesh Venkat
Michel Weimerskirch
Paulus Schoutsen
Gabor SZOLLOSI
Lukas Barth
Phil Kates
Egor Tsinko
Jan Almeroth
Teemu R
Joe Lu
Marcelo Moreira de Mello
pascal
Dan Chen
Nolan Gilley
Pascal Vizeli
Aaron Bach
William Scanlon
Pierre Ståhl
rbflurry
Anders Melchiorsen
Mike Megally
joe248
Enrique Gonzalez
Timo S
marthoc
Johan Bloemberg
Paul Sokolovsky
happyleavesaoc
Malte Franken
Andrey
Tom Matheussen
Michael Prokop
Daniel Høyer Iversen
Julius Mittenzwei
Sébastien RAMAGE
Mahasri Kalavala
Daniel Perna
Kane610
Colin Dunn
nilzen
c-soft
Marcel Holle
Blender3D
Sebastian Muszynski