* Fix webhook registration
* Only load camera platform with valid scope
* Add initial data handler and netatmo base class
* Update camera to use data handler
* Update init
* Parallelize API calls
* Remove cruft
* Minor tweaks
* Refactor data handler
* Update climate to use data handler
* Fix pylint error
* Fix climate update not getting fresh data
* Update climate data
* update to pyatmo 4.0.0
* Refactor for pyatmo 4.0.0
* Exclude from coverage until tests are written
* Fix typo
* Reduce parallel calls
* Add heating request attr
* Async get_entities
* Undo parallel updates
* Fix camera issue
* Introduce individual scan interval per device class
* Some cleanup
* Add basic webhook support for climate to improve responsiveness
* Replace ClimateDevice by ClimateEntity
* Add support for turning camera on/off
* Update camera state upon webhook events
* Guard data class registration with lock
* Capture errors
* Add light platform
* Add dis-/connect handling
* Fix set schedule service
* Remove extra calls
* Add service to set person(s) home/away
* Add service descriptions
* Improve service descriptions
* Use LightEntity instead of Light
* Add guard if no data is retrieved
* Make services entity based
* Only raise platform not ready if there is a NOC
* Register webhook even during runtime
* Fix turning off event
* Fix linter error
* Fix linter error
* Exclude light platform from coverage
* Change log level
* Refactor public weather sensor to use data handler
* Prevent too short coordinates
* Ignore modules without _id
* Code cleanup
* Fix test
* Exit early if no home data is retrieved
* Prevent discovery if already active
* Add services to (un-)register webhook
* Fix tests
* Not actually a coroutine
* Move methods to base class
* Address pylint comment
* Address pylint complaints
* Address comments
* Address more comments
* Add docstring
* Use single instance allowed
* Extract method
* Remove cruft
* Write state directly
* Fix test
* Add file to coverage
* Move nested function
* Move nested function
* Update docstring
* Clean up code
* Fix webhook bug
* Clean up listeners
* Use deque
* Clean up prints
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rename data_class variable
* Break when match
* Extract method
* Extract methods
* Rename variable
* Improve comment
* Some refinements
* Extra
* Extract method
* Simplify code
* Improve reability
* Code simplification
* Simplify code
* Simplify code
* Code cleanup
* Fix import
* Clean up
* Clean up magic strings
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with HOMEDATA_DATA_CLASS_NAME
* Replace data_class_name in public weather sensor
* Clean up
* Remove deprecated config options
* Schedule immediate update on camera reconnect
* Use UUID to clearly identify public weather areas
* Use subscription mode
* Move clean up of temporary data classes
* Delay data class removal
* Fix linter complaints
* Adjust test
* Only setup lights if webhook are registered
* Prevent crash with old config entries
* Don't cache home ids
* Remove stale code
* Fix coordinates if entered mixed up by the user
* Move nested function
* Add test case for swapped coordinates
* Only wait for discovery entries
* Only use what I need
* Bring stuff closer to where it's used
* Auto clean up setup data classes
* Code cleanup
* Remove unneccessary lock
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/netatmo/test_config_flow.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Clean up dead code
* Fix formating
* Extend coverage
* Extend coverage
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add public weather sensors back in
* Remove stale code
* Cleanup after before adding entities
* Fix pylint complaint
* Add test for options flow
* Change mode to listbox
* Update .coveragerc
* Address comments
* Don't process empty list
* Address comment
* Fix mistake
* Make signal unique
* Make string more unique
* Fix merge conflict
* Add prettier (in pre-commit and CI)
* Make all file prettier
* Change order
* Add to Azure Pipelines
* Fix a YAML file prettier caught as invalid
* Remove flow mapping using curly braces from all YAML service files
* Handle unavailabe entities
* Remove some logging
* Set valve to lowest temp when turned off
* Remove some logging
* Address comments
* Report entity as connected if update is successful
* Fix stupidness
* Fix
* Wait for cloud connection
* Just wait
* Remove redundant entry
* Drop webhook before unloading other platforms
* Add missing scope
* Update homeassistant/components/netatmo/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Start webhook implementation
* Add webhook implementation
* Bump pyatmo 3.2.5
* Fire event after data evaluation
* Setup webhooks after components
* Fix logging
* Wrap non async call
* Wrap non async call
* Add smoke detector and door tag webhook support
* Catch when webhook registration fails
* Log to debug
* Fix persons lookup
* Add dependency
* Remove false requirements
* Fix requirements
* Replace netatmo events by a single one
* Slim down code
* Clean up code
* Address review vomments
* Undo attribute removal
* Bump pyatmo to v3.3.0
* Only create webhook id once and reuse
* Store and reuse cloudhook url
* Wait for hass core to be up and running
* Register webhook once HA is ready
* Delay webhook registration
* Add and use speed constants
* Add and use meter based volume and area constants
* Add and use more mass unit constants
* Add and use concentration unit constants
* Add and use watts per square meter constant
* Use more time constants
* Use more data constants
* Add and use time related constants
* Sort time constants and reuse them in data rate constants
* Fix greeneyemonitor import
* Fix greeneyemonitor import V2
* Fix failing here_travel_time test
* Add TIME_MONTHS and TIME_YEARS
* Use TIME_MINUTES in opentherm_gw and isy994
* Add and use TIME_MILLISECONDS
* Change inconsistent ones
* Add TIME_MICROSECONDS and TIME_WEEKS
* Use constants in apcupsd and travisci
* Fix import error in upnp sensor.py
* Fix isy994 sensor.py using TIME_YEARS
* Fix dyson tests
* Use TIME_SECONDS in more places
* Use TIME_DAYS in google wifi
Paulus Schoutsen
Tobias Sauerwein
HomeAssistant Azure
Philip Allgaier
Christian Bilevits
J. Nick Koston
springstan
Martin Hjelmare
Joakim Sørensen
Franck Nijhof
Bram Kragten
Erik Montnemery
Daniel Høyer Iversen
Ville Skyttä