* non optimistic
* test restored state
* ups
* review
* Ensure the entity is not in optimistic mode
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Disambiguate HTTPUnauthorized on user/password validation
The HA core API usually returns 401 when the request does not
have proper authentication tokens or they have expired.
However the user/password validation endpoint may also return
401 when the given user/password is invalid.
The supervisor is currently unable to distinguish both scenarios,
and it needs to.
See https://github.com/home-assistant/supervisor/issues/2408
* Return 404 if user& password are not found/valid
* Fix test for invalid user/password
* Use parent_id to find cause of events with new contexts
When looking up the causing event for logbook display, use the `parent_id`
of the current context if the current context just points back to the
current event.
This now shows in the logbook the cause of an event in the case that a
component has created a new context from an existing context and tied
them together via the `Context.parent_id`.
* Fix exception when parent event not available
* Use async_Log_entry to avoid jump into executor
* useEndTime2hour - 2 hours
* useEndTime4hour - 4 hours
* indefinite - Until I change it
These changes have been tested with an ecobee3 lite running firmware
version 4.5.81.200
Signed-off-by: Jamin W. Collins <jamin.collins@gmail.com>
* Remove sensor-scaling, handled by the back-end
* Correct assert-values
* Update test-fixtures
* Revert "Correct assert-values"
This reverts commit f1a1891f73.
* Adapt value to the updated userdata set
* Link to plugwise v0.8.5, update fixtures
* Correct test-values
* Fix typo
* Make async_get_device connections Optional, default None
* Remove unnecessary async_get_device connections arg usages
Some of these were using an incorrect collection type, which didn't
cause issues mostly just due to luck.
* Capture nest still images from events
Use python google-nest-sdm API for fetching images. Update home assistant
to use the google-nest-sdm API for fetching the image contents generated
by the server. This uses the existing websession object for server fetches,
reducing the amount of new code and facilites unit testing using the existing
mechanism.
Simplify tests using the image fetch API rather than a snapshot API
* Updates following comments in PR 44728
* Make all api calls in same thread context
* Set API as parameter to get_all_pools_data
* extract pools data retrieval function to api class
* Re-add support for dynamic groups
* Add tests
* Add support for manufacturer
* Refactor support for dynamic groups
* Bump pychromecast to 7.7.0
* Bump pychromecast to 7.7.1
* Tweak tests
* Apply review suggestion
* Adding switch code for harmony activities
* Working on-off
* Removing poll code for now
* Async updates for current activity
* Update our state based on events
* Notifications we got connected or disconnected
* Remove unncessary constructor arg
* Initial switch tests
* Additional tests for switch transitions
* Test transitions for availability
* Testing switch state changes
* Tests passing
* Final tests
* Updating manifest.
* Correctly mock the return value from a call to the library
* Adding new subscriber classes
* Update class name and location
* Got the refactor working locally.
* Tests passing
* Tracking state changes
* Remove write_to_config_file - this appears to never be read.
It was added far back in the past to account for a harmony library
change, but nothing ever reads that path.
Removing that side effect from tests is a pain - avoid the side effect
completely.
* Connection changes tested
* Clean up temporary code
* Update .coveragerc for harmony component
Specifically exclude untested files instead of the whole module
* Fix linting
* test sending activity change commands by id
* Improving coverage
* Testing channel change commands
* Splitting subscriber logic into it's own class
* Improve coverage and tighten up .coveragerc
* Test cleanups.
* re-add config file writing for harmony remote
* Create fixture for the mock harmonyclient
* Reduce duplication in subscription callbacks
* use async_run_job to call callbacks
* Adding some tests for async behaviors with subscribers.
* async_call_later for delay in marking remote unavailable
* Test disconnection handling in harmony remote
* Early exit if activity not specified
* Use connection state mixin
* Lint fix after rebase
* Fix isort
* super init for ConnectionStateMixin
* Adding @mkeesey to harmony CODEOWNERS
* Add nearest method
* Add tests
* Move urls to consts
* Simplify config flow
* Fix tests
* Update tests
* Use in instead get
* Fix AirlyError message in tests
* Fix manual update entity tests
* Clean up tests
* Fix after rebase
* Increase test coverage
* Format the code
* Fix after rebase
* Add logbook and device trigger platforms to Shelly
Add `logbook` platform for describing “shelly.click” event
Add `device_trigger` platform for adding automation based on click events:
Example of logbook event:
Shelly 'single' click event for Test I3 channel 3 was fired.
(Test I3 is the name of the device)
Example of automation triggers:
First button triple clicked
First button long clicked and then single clicked
First button double clicked
First button long clicked
First button single clicked and then long clicked
First button single clicked
Second button triple clicked
..
Second button single clicked
* Fix codespell
* Remove pylint added for debug
* Add tests
* Rebase
* Fix Rebase & Apply PR review suggestions
Fix tests after rebasing
Use `INPUTS_EVENTS_DICT` for input triggers
Apply PR suggestions
* First implementationof Ondilo component support
* Update manifest toadd pypi pkg dependency
* Update entities name and corrected refresh issue
* Changed percentage unit name
* Corrected merge issues
* Updated coveragerc
* cleaned up code and corrected config flow tests
* Code cleanup and added test for exisitng entry
* Changes following PR comments:
- Inherit CoordinatorEntity instead of Entity
- Merged pools blocking calls into one
- Renamed devices vars to sensors
- Check supported sensor types
- Stop relying on array index position for pools
- Stop relying on attribute position in dict for sensors
* Corrected unit test
* Reformat sensor type check
* Bump PyTado to v0.10.0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Tado: switch to getDeviceInfo
This function has been introduced in version 0.10.0 of PyTado.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Tado: update tests
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Add tilt control for RFXtrx Rfy venetian blinds
* Update Rfy cover test
* Update the required version of pyRFXtrx
* Update required pyRFXtrx version to 0.26.1
* Revert "Update required pyRFXtrx version to 0.26.1"
This reverts commit d54f1645d5.
* Revert "Update the required version of pyRFXtrx"
This reverts commit ac36d65326.
* Update required version of pyRFXtrx to 0.26.1
* @dzukero
Update required version of pyRFXtrx to 0.26.1
* Make requested changes from review
* Fix isort
* Remove set tilt position support
* Remove set tilt position support per review
Erik Montnemery
Diogo Gomes
Sergio Oller
Joakim Sørensen
J. Nick Koston
Michael Chisholm
Jamin Collins
Bouwe Westerdijk
jjlawren
Paulus Schoutsen
Ville Skyttä
Allen Porter
JeromeHXP
mvn23
Shane Qi
Mike Keesey
Maciej Bieniek
Shay Levy
Joakim Plate
On Freund
Simone Chemelli
Pascal Vizeli
Álvaro Fernández Rojas
dzukero
Will Hughes
Franck Nijhof
Sian
Clifford Roche
Raman Gupta