* Growatt Server Config flow
* Use reference strings
Co-authored-by: SNoof85 <snoof85@gmail.com>
* Remove configuration.yaml import logic
* Removed import test
* Re-added PLATFORM_SCHEMA validation
* Import yaml from old yaml configuration
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Feedback
* Use Executor for IO only
* Fix imports
* update requirements
* Fix flake8
* Run every section of fetching devices in single executor
* Config flow feedback
* Clean up
* Fix plan step
* Fix config flow test
* Remove duplicate test
* Test import step
* Test already configured entry
* Clean up tests
* Add asserts
* Mock out entry setup
* Add warning if set up via yaml
Co-authored-by: SNoof85 <snoof85@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Scaffold the integration
* Add config flow data schema
* Handle configuration errors
* Get folder states
* Support https
* Fix translations
* Listen to syncthing events in a separate thread
* Bump syncthing
* Automatically reconnect to the syncthing server
* Renames
* Improve loading and unloading
* Update folder states from events
* Refactoring, handle FolderPaused event
* Dynamic folder icons
* Refactoring
* Mark folders as unavailable when senrver is unavailable
* Update folder satus when server is available
* Raise PlatformNotReady
* Implement additional polling
* Stop polling when the server is not available
* Minor fixes
* Remove logging
* Check name uniqueness
* Refactoring
* Minor refactorings
* Bump python-syncthing
* Migrate to aiosyncthing
* Minor fixes
* Update .coveragerc
* Set quality scale
* Bump aiosyncthing, properly handle invalid token
* Fix logging
* Fix logging
* Use CONF_VERIFY_SSL from homeassistant.const
* Bump aiosyncthing. Add Syncthing device
* Fix device name
* Bump aiosyncthing
* Bump aiosyncthing
* Extract SyncthingClient
* Add folder to device_state_attributes
* Do not pass the loop
* Cover config_flow.py
* Move self.async_create_entry outside of the try block
* Raise ConfigEntryNotReady if syncthing server is not reachable
* Fix already configured error message
* Change default name to Syncthing
* Bump aiosyncthing
* Fix formatting
* Fix formatting
* Fix tests
* Fix typo, use lis comprehension
* Fix typo, remove unused CONFIG_SCHEMA
* Bump aiosyncthing
* Remove periods from log messages W0001
* Fix tests
* Black, isort
* Remove empty items from manifest.json
* Fix variable naming
* Remove async_setup
* Use SensorEntity
* Use asyncio.create_task instead of self._hass.loop.create_task
* Do not pass hass to FolderSensor initializer
* Rename device_state_attributes to extra_state_attributes
* Use callbacks
* Simplify tests
* Refactor _listen()
* Use url for the title
* Use the url instead of the name to identify the config entry
* Explicitly set sensor attributes, extract _filter_state
* Use server url instead of name in device_info
* Use server url instead of name in logs
* User server id as a device identifier
* Use URL instead of name to identify config entry
* Use shortened server id instead of name to build entity name and unique id
* Do not use CONF_NAME
* Cleanup unused strings
* Cleanup unused strings
* Add IOT class
* Scaffold the integration
* Add config flow data schema
* Handle configuration errors
* Get folder states
* Support https
* Fix translations
* Listen to syncthing events in a separate thread
* Bump syncthing
* Automatically reconnect to the syncthing server
* Renames
* Improve loading and unloading
* Update folder states from events
* Refactoring, handle FolderPaused event
* Dynamic folder icons
* Refactoring
* Mark folders as unavailable when senrver is unavailable
* Update folder satus when server is available
* Raise PlatformNotReady
* Implement additional polling
* Stop polling when the server is not available
* Minor fixes
* Remove logging
* Check name uniqueness
* Refactoring
* Minor refactorings
* Bump python-syncthing
* Migrate to aiosyncthing
* Minor fixes
* Update .coveragerc
* Set quality scale
* Bump aiosyncthing, properly handle invalid token
* Fix logging
* Fix logging
* Use CONF_VERIFY_SSL from homeassistant.const
* Bump aiosyncthing. Add Syncthing device
* Fix device name
* Bump aiosyncthing
* Bump aiosyncthing
* Extract SyncthingClient
* Add folder to device_state_attributes
* Do not pass the loop
* Cover config_flow.py
* Move self.async_create_entry outside of the try block
* Raise ConfigEntryNotReady if syncthing server is not reachable
* Fix already configured error message
* Change default name to Syncthing
* Bump aiosyncthing
* Fix formatting
* Fix formatting
* Fix tests
* Fix typo, use lis comprehension
* Fix typo, remove unused CONFIG_SCHEMA
* Bump aiosyncthing
* Remove periods from log messages W0001
* Fix tests
* Black, isort
* Remove empty items from manifest.json
* Fix variable naming
* Remove async_setup
* Use SensorEntity
* Use asyncio.create_task instead of self._hass.loop.create_task
* Do not pass hass to FolderSensor initializer
* Rename device_state_attributes to extra_state_attributes
* Use callbacks
* Simplify tests
* Refactor _listen()
* Use url for the title
* Use the url instead of the name to identify the config entry
* Explicitly set sensor attributes, extract _filter_state
* Use server url instead of name in device_info
* Use server url instead of name in logs
* User server id as a device identifier
* Use URL instead of name to identify config entry
* Use shortened server id instead of name to build entity name and unique id
* Do not use CONF_NAME
* Cleanup unused strings
* Cleanup unused strings
* Add IOT class
* Apply suggestions from code review
* Clean up
* Fix dict comprehension
* Clean sensor
* Use the server ID as a config entry unique ID
* Remove the AlreadyConfigured exception
* Clean up old error string
* Format json
* Convert sensor attributes to snake case
* Force CI
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
The previous iAlarm integration has been removed because it used
webscraping #43010.
Since then, the pyialarm library has been updated to use the iAlarm API
instead.
With this commit I reintroduce the iAlarm integration, leveraging the
new HA config flow.
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
* Update Ezviz Component
* Update Ezviz for pylint test
* Update Ezviz component pylint tests
* Update Ezviz component tests
* Update Ezviz Component tests
* Update Ezviz component pylint error
* Fix ezviz component config flow tests
* Update ezviz component
* Update Ezviz component
* Add sensor platforms
* issue with requirements file
* Update binary_sensor to include switches
* Updates to Ezviz sensors
* Removed enum private method.
* Fix switch args
* Update homeassistant/components/ezviz/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* config flow checks login info
* Config_flow now imports ezviz from camera platform
* Update test
* Updated config_flow with unique_id and remove period from logging
* Added two camera services and clarified service descryptions in services.yaml
* Fixed variable name mistake with new service
* Added french integration translation
* Config_flow add camera rtsp credentials as seperate entities, with user step and import step
* rerun hassfest after rebase
* Removed region from legacy config schema, removed logging in camera platform setup that could contain credentials, removed unused constant.
* Regenerate requirements
* Fix tests and add config_flow import config test
* Added addition test to config_flow to test successfull camera entity create.
* Add to tests method to end in create entry, config_flow cleanup, use entry instead of entry.data
* Removed all services, sorted platforms in init file.
* Changed RTSP logging to debug from warning. (Forgot to change this before commit)
* Cleanup typing, change platform order, bump pyezviz version
* Added types to entries, allow creation of main entry if deleted by validating existance of type
* Config_flow doesn't store serial under entry data, camera rtsp read from entry and not stored in hass, removed duplicate abort if unique id from config flow
* Fix test of config_flow
* Update tests/components/ezviz/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/ezviz/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/ezviz/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bumped pyezviz api version, added api pyezvizerror exception raised in api (on HTTPError), cleanup unused imports.
* rebase
* cleanup coordinator, bump pyezviz api version, move async_setup_entry to add entry options to camera entries. (order change)
* Added discovery step in config_flow if cameras detected without rtsp config entry
* Reload main integration after addition or completion of camera rtsp config entry
* Add tests for discovery config_flow, added a few other output asserts
* Camera platform call discover flow with hass.async_create_task. Fixes to config_flow for discovery step
* Fix config_flow discovery, add check to legacy yaml camera platform import, move camera private method to camera import step
* Remove not needed check from config_flow import step.
* Cleanup config_flow
* Added config_flow description for discovered camera
* Reordered description in config_flow confim step.
* Added serial to flow_step description for discovered camera, readded camera attributes for rtsp stream url (allows user to check RTSP cred), added local ip and firmware upgade available.
* Bumped pyezviz version and changed region code to region url. (Russia uses a completly different url). PyEzviz adds a Local IP sensor, removed camera entity attributes.
* Add RSTP describe auth check from API to config_flow
* url as vol.in options in Config_flow
* Config_flow changes to discovery step, added exceptions, fixed tests, added rtsp config validate module mock to test disovery confirm step
* Add test for config_flow step user_camera
* Added tests for abort flow
* Extend tests on custom url flow step
* Fix exceptions in config_flow, fix test for discovery import exception test
* Bump pyezviz api version
* Bump api version, added config_flow function to wake hybernating camera before testing credentials, removed "user camera" step from config flow not needed as cameras are discovered.
* Create pyezviz Api instance for config_flow wake hybernating camera, fixed tests and added fixture to mock method
* Added alarm_control_panel with support to arm/disarm all cameras, fixed camera is available attribute (returns 2 if unavailable, 1 if available)
* Skip ignored entities when setup up camera RTSP stream
* Remove alarm_control_panel, add additional config_flow tests
* Cleanup tests, add tests for discovery_step.
* Add test for config_flow rtsp test step1 exceptions
* Removed redundant except from second step in test RTSP method
* All tests to CREATE or ABORT, added step exception for general HTTP error so user can retry in case of trasient network condition
* Ammended tests with output checks for step_id, error, data, create entry method calls.
* bumped ezviz api now rases library exceptions. Config_flow, coordiantor and init raises library exceptions. Updated test sideeffect for library exceptions
* Bump api version, Create mock ezviz cloud account on discovery tests first to allow more complete testing of step.
* Add abort to rtsp verification method if cloud account was deleted and add tests
* Update tests/components/ezviz/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/const.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/ezviz/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Undo config import change to password key for yaml, move hass.data.setdefault to async_setup_entry and remove async_setup
* Fixed tests by removing _patch_async_setup as this was removed from init.
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/ezviz/camera.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Changed L67 on camera config to complete suggestion for cleanup
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* New integration for Kostal Plenticore solar inverters.
* Fix errors from github pipeline.
* Fixed test for py37.
* Add more test for test coverage check.
* Try to fix test coverage check.
* Fix import sort order.
* Try fix test code coverage .
* Mock api client for tests.
* Fix typo.
* Fix order of rebased code from dev.
* Add new data point for home power.
* Modifications to review.
Remove service for write access (for first pull request). Refactor
update coordinator to not use the entity API.
* Fixed mock imports.
* Ignore new python module on coverage.
* Changes after review.
* Fixed unit test because of config title.
* Fixes from review.
* Changes from review (unique id and mocking of tests)
* Use async update method. Change unique id. Remove _dict
* Remove _data field.
* Removed login flag from PlenticoreUpdateCoordinator.
* Removed Dynamic SoC sensor because it should be a binary sensor.
* Remove more sensors because they are binary sensors.
* Add config flow for Waze Travel Time
* update translations
* setup entry is async
* fix update logic during setup
* support old config method in the interim
* fix requirements
* fix requirements
* add abort string
* changes based on @bdraco review
* fix tests
* add device identifier
* Update homeassistant/components/waze_travel_time/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* fix tests
* Update homeassistant/components/waze_travel_time/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* log warning for deprecation message
* PR feedback
* fix tests and bugs
* re-add name to config schema to avoid breaking change
* handle if we get name from config in entry title
* fix name logic
* always set up options with defaults
* Update homeassistant/components/waze_travel_time/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update config_flow.py
* Update sensor.py
* handle options updates by getting options on every update
* patch library instead of sensor
* fixes and make sure first update writes the state
* validate config entry data during config flow and entry setup
* fix input parameters
* fix tests
* invert if statement
* remove unnecessary else
* exclude helpers from coverage
* remove async_setup because it's no longer needed
* fix patch statements
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Added a new weather integration - Met Éireann
* Fix codespell error
* Update met_eireann to use CoordinatorEntity
* Remove deprecated platform setup
* Fix merge conflict
* Remove unnecessary onboarding/home tracking code
* Use common strings for config flow
* Remove unnecessary code
* Switch to using unique IDs in config flow
* Use constants where possible
* Fix failing tests
* Fix isort errors
* Remove unnecessary DataUpdateCoordinator class
* Add device info
* Explicitly define forecast data
* Disable hourly forecast entity by default
* Update config flow to reflect requested changes
* Cleanup code
* Update entity naming to match other similar components
* Convert forecast time to UTC
* Fix test coverage
* Update test coverage
* Remove elevation conversion
* Update translations for additional clarity
* Remove en-GB translation
* add config flow support to google_travel_time
* fix bugs and add strings
* fix import and add new test
* address comments in #43419 since this is a similar PR
* fix default name and test
* add unique ID and device info
* fix test
* feedback from waze PR
* continue incorporating feedback from waze PR
* final fixes and update tests
* call update in lambda
* Update homeassistant/components/google_travel_time/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* additional fixes
* validate config entry data during config flow and config entry setup
* don't store entity
* patch dependency instead of HA code
* fixes
* improve tests by moving all patching to fixtures
* use self.hass instead of setting self._hass
* invert if
* remove unnecessary else
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add config flow to philips_js
* Adjust name of entry to contain serial
* Use device id in event rather than entity id
* Adjust turn on text
* Deprecate all fields
* Be somewhat more explicit in typing
* Switch to direct coordinator access
* Refactor the pluggable action
* Adjust tests a bit
* Minor adjustment
* More adjustments
* Add missing await in update coordinator
* Be more lenient to lack of system info
* Use constant for trigger type and simplify
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* MySensors: Add type annotations
Adds a bunch of type annotations that were created
while understanding the code.
* MySensors: Change GatewayId to string
In preparation for config flow.
The GatewayId used to be id(gateway).
With config flows, every gateway will have its own
ConfigEntry. Every ConfigEntry has a unique id.
Thus we would have two separate but one-to-one related ID systems.
This commit removes this unneeded duplication by using the id of the ConfigEntry
as GatewayId.
* MySensors: Add unique_id to all entities
This allows entities to work well with the frontend.
* MySensors: Add device_info to all entities
Entities belonging to the same node_id will now by grouped as a device.
* MySensors: clean up device.py a bit
* MySensors: Add config flow support
With this change the MySensors can be fully configured from the GUI.
Legacy configuration.yaml configs will be migrated by reading them once.
Note that custom node names are not migrated. Users will have to re-enter
the names in the front-end.
Since there is no straight-forward way to configure global settings,
all previously global settings are now per-gateway. These settings include:
- MQTT retain
- optimistic
- persistence enable
- MySensors version
When a MySensors integration is loaded, it works as follows:
1. __init__.async_setup_entry is called
2. for every platform, async_forward_entry_setup is called
3. the platform's async_setup_entry is called
4. __init__.setup_mysensors_platform is called
5. the entity's constructor (e.g. MySensorsCover) is called
6. the created entity is stored in a dict in the hass object
* MySensors: Fix linter errors
* MySensors: Remove unused import
* MySensors: Feedback from @MartinHjelmare
* MySensors: Multi-step config flow
* MySensors: More feedback
* MySensors: Move all storage in hass object under DOMAIN
The integration now stores everything under hass.data["mysensors"]
instead of using several top level keys.
* MySensors: await shutdown of gateway instead of creating a task
* MySensors: Rename Ethernet to TCP
* MySensors: Absolute imports and cosmetic changes
* MySensors: fix gw_stop
* MySensors: Allow user to specify persistence file
* MySensors: Nicer log message
* MySensors: Add lots of unit tests
* MySensors: Fix legacy import of persistence file name
Turns out tests help to find bugs :D
* MySensors: Improve test coverage
* MySensors: Use json persistence files by default
* MySensors: Code style improvements
* MySensors: Stop adding attributes to existing objects
This commit removes the extra attributes that were being
added to the gateway objects from pymysensors.
Most attributes were easy to remove, except for the gateway id.
The MySensorsDevice class needs the gateway id as it is part of its DevId
as well as the unique_id and device_info.
Most MySensorsDevices actually end up being Entities.
Entities have access to their ConfigEntry via self.platform.config_entry.
However, the device_tracker platform does not become an Entity.
For this reason, the gateway id is not fetched from self.plaform but
given as an argument.
Additionally, MySensorsDevices expose the address of the gateway
(CONF_DEVICE). Entities can easily fetch this information via self.platform,
but the device_tracker cannot. This commit chooses to remove the gateway
address from device_tracker. While this could in theory break some automations,
the simplicity of this solution was deemed worth it.
The alternative of adding the entire ConfigEntry as an argument to MySensorsDevices
is not viable, because device_tracker is initialized by the async_setup_scanner function
that isn't supplied a ConfigEntry. It only gets discovery_info.
Adding the entire ConfigEntry doesn't seem appropriate for this edge case.
* MySensors: Fix gw_stop and the translations
* MySensors: Fix incorrect function calls
* MySensors: Fewer comments in const.py
* MySensors: Remove union from _get_gateway and remove id from try_connect
* MySensors: Deprecate nodes option in configuration.yaml
* MySensors: Use version parser from packaging
* MySensors: Remove prefix from unique_id and change some private property names
* MySensors: Change _get_gateway function signature
* MySensors: add packaging==20.8 for the version parser
* MySensors: Rename some stuff
* MySensors: use pytest.mark.parametrize
* MySensors: Clean up test cases
* MySensors: Remove unneeded parameter from devices
* Revert "MySensors: add packaging==20.8 for the version parser"
This reverts commit 6b200ee01a.
* MySensors: Use core interface for testing configuration.yaml import
* MySensors: Fix test_init
* MySensors: Rename a few variables
* MySensors: cosmetic changes
* MySensors: Update strings.json
* MySensors: Still more feedback from @MartinHjelmare
* MySensors: Remove unused strings
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* MySensors: Fix typo and remove another unused string
* MySensors: More strings.json
* MySensors: Fix gateway ready handler
* MySensors: Add duplicate detection to config flows
* MySensors: Deal with non-existing topics and ports.
Includes unit tests for these cases.
* MySensors: Use awesomeversion instead of packaging
* Add string already_configured
* MySensors: Abort config flow when config is found to be invalid while importing
* MySensors: Copy all error messages to also be abort messages
All error strings may now also be used as an abort reason,
so the strings should be defined
* Use string references
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Run zwave_js scaffold (#44891)
* Add zwave_js basic connection to zwave server (#44904)
* add the basic connection to zwave server
* fix name
* Fix requirements
* Fix things
* Version bump dep to 0.1.2
* fix pylint
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Bump zwave-js-server-python to 0.2.0
* Use zwave js server version check instead of fetching full state (#44943)
* Use version check instead of fetching full state
* Fix tests
* Use 0.3.0
* Also catch aiohttp client errors
* Update docstring
* Lint
* Unignore zwave_js
* Add zwave_js entity discovery basics and sensor platform (#44927)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Complete zwave_js typing (#44960)
* Type discovery
* Type init
* Type entity
* Type config flow
* Type sensor
* Require typing of zwave_js
* Complete zwave_js config flow test coverage (#44955)
* Correct zwave_js sensor device class (#44968)
* Fix zwave_js KeyError on entry setup timeout (#44966)
* Bump zwave-js-server-python to 0.5.0 (#44975)
* Remove stale callback signal from zwave_js (#44994)
* Add light platform to zwave_js integration (#44974)
* add light platform
* styling fix
* fix type hint
* Fix typing
* Update homeassistant/components/zwave_js/const.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* color temp should be integer
* guard Nonetype error
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* some fixes after merging
* add additional guards for None values
* adjustments for rgb lights
* Fix typing
* Fix black
* Bump zwave-js-server-python to 0.6.0
* guard value updated log
* remove value_id lookup as its no longer needed
* fiz sending white value
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js test foundation (#44983)
* Exclude text files from codespell
* Add basic dump fixture
* Add test foundation
* Fix test after rebase
* Exclude jsonl files from codespell
* Rename fixture file type to jsonl
* Update fixture path
* Fix stale docstring
* Add controller state json fixture
* Add multisensor 6 state json fixture
* Update fixtures
* Remove basic dump fixture
* Fix fixtures after library bump
* Update codeowner
* Minor cleanup Z-Wave JS (#45021)
* Update zwave_js device_info (#45023)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Marcel van der Veldt <m.vanderveldt@outlook.com>
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* First implementationof Ondilo component support
* Update manifest toadd pypi pkg dependency
* Update entities name and corrected refresh issue
* Changed percentage unit name
* Corrected merge issues
* Updated coveragerc
* cleaned up code and corrected config flow tests
* Code cleanup and added test for exisitng entry
* Changes following PR comments:
- Inherit CoordinatorEntity instead of Entity
- Merged pools blocking calls into one
- Renamed devices vars to sensors
- Check supported sensor types
- Stop relying on array index position for pools
- Stop relying on attribute position in dict for sensors
* Corrected unit test
* Reformat sensor type check
* Add Config Flow to bmw_connected_drive
* Fix checks for bmw_connected_drive
* Adjust code as requested
* Clean .coveragerc after merge
* Use references for config flow
* Fix execute_service check against allowed accounts
* Adjust translation as username can be email or phone no
* Add BMWConnectedDriveBaseEntity mixin, remove unnecessary type casts
* Use BaseEntity correctly, fix pylint error
* Bump bimmer_connected to 0.7.13
* Adjustments for review
* Fix pylint
* Fix loading notify, move vin to entity attrs
* Remove vin from device registry
* Remove commented-out code
* Show tracker warning only if vehicle (currently) doesn't support location
* Remove unnecessary return values & other small adjustments
* Move original hass_config to own domain in hass.data
* Move entries to separate dict in hass.data
* Remove invalid_auth exception handling & test as it cannot happen
Co-authored-by: rikroe <rikroe@users.noreply.github.com>
* Add twinkly integration
* Add tests for the Twinkly integration
* Update Twinkly client package to fix typo
* Remove support of configuration.yaml from Twinkly integration
* Add ability to unload Twinkly component from the UI
* Remove dead code from Twinkly
* Fix invalid error namespace in Twinkly for python 3.7
* Fix tests failing on CI
* Workaround code analysis issue
* Move twinkly client init out of entry setup so it can be re-used between entries
* Test the twinkly component initialization
* React to PR review and add few more tests
* Add Ruckus Unleashed integration
* Tweak catches to better rely on CoordinatorEntity error handling, rename LoginError to AuthenticationError
* Make router_update be a callback function
* Make name property return hint match the newer value
* Add entity to tracked set when restoring on boot
* Add a device's MAC to the attributes
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Fixed ORP method not being @property, fixed unique_id potential issue. Does not address comments from PR.
* Rewrote coordinator for updated dict structure, rewrote sensors to parse new data structure.
* Added alarms as attributes on all entities which support alarm reporting.
* Updated SENSOR_TYPES to sensor_types to adhere to snake case in pylint.
* Addressed PR comments.
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed binary sensor conditions (alarms, on/off sensor types) and added ability for multiple guard conditions
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Updated per comments in PR for Pump Type and removal of force_update().
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/common.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Correctly asserting conditions for the login exception case.
* Update .coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Mike Hershberger <mike.hershberger@gmail.com>
Co-authored-by: Chad <54695185+chadlyy@users.noreply.github.com>
Co-authored-by: Tim Empringham <tim.empringham@live.ca>
Co-authored-by: djtimca <60706061+djtimca@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Opened a new fresh page to clean my mess.
* Solved pylint warnings
* Fixing pylint issue of defining attr outside init.
* Excluded files from being tested by codecov.
* Solved binary sensor error.
* Fixed some stylisation errors.
* Resolved input not updating problem.
* Added port entry to test file.
* Added tests for create_entry.
* Added support for better state management.
* Increased code coverage of config_flow.py & made some tweaks.
* Increased coverage of config_flow.py by adding tests for unknown exceptions.
* A small bugfix.
* Stylised code as per Chris' suggestions.
* Stylised code again.
* Improved quality of test code.
* Added step_id in config flow tests.
* Implement config flow in the Broadlink integration
* General improvements to the Broadlink config flow
* Remove unnecessary else after return
* Fix translations
* Rename device to device_entry
* Add tests for the config flow
* Improve docstrings
* Test we do not accept more than one config entry per device
* Improve helpers
* Allow empty packets
* Allow multiple config files for switches related to the same device
* Rename mock_device to mock_api
* General improvements
* Make new attempts before marking the device as unavailable
* Let the name be the template for the entity_id
* Handle OSError
* Test network unavailable in the configuration flow
* Rename lock attribute
* Update manifest.json
* Import devices from platforms
* Test import flow
* Add deprecation warnings
* General improvements
* Rename deprecate to discontinue
* Test device setup
* Add type attribute to mock api
* Test we handle an update failure at startup
* Remove BroadlinkDevice from tests
* Remove device.py from .coveragerc
* Add tests for the config flow
* Add tests for the device
* Test device registry and update listener
* Test MAC address validation
* Add tests for the device
* Extract domains and types to a helper function
* Do not patch integration details
* Add tests for the device
* Set device classes where appropriate
* Set an appropriate connection class
* Do not set device class for custom switches
* Fix tests and improve code readability
* Use RM4 to test authentication errors
* Handle BroadlinkException in the authentication
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Avoid reading meters on startup
Cherrypick @bdraco's suggestion
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Remove unnecessary try/except block
This checks for the same exception just prior in execution on L51.
* Remove unused return values
* Add tests
* Improve tests and coverage
* Use more pythonic control flow
* Remove all uses of hass.data
Co-authored-by: J. Nick Koston <nick@koston.org>
* Squashed
* Fix requirements_all
* Update homeassistant/components/insteon/__init__.py
Only update options if the result is to create the entry.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/insteon/__init__.py
No return value needed.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Ref RESULT_TYPE_CREATE_ENTRY correctly
* Return result back to import config process
* Make DOMAIN ref more clear
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add config flow to HLK-SW16
* Use entry_id for unique_id
* Add options update capability
* Refactor entry_id under domain
* Remove name from config
* Set options
* Remove options flow
* remove unneccesary else block from validate_input and move domain cleanup to async_unload_entry
* Add tests and config import
* Add back config schema
* Remove config import
* Refactor unload
* Add back config import
* Update coveragerc
* Don't mock validate_input
* Test duplicate configs
* Add import test
* Use patch for timeout test
* Use mock for testing timeout
* Use MockSW16Client for tests
* Check mock_calls count
* Remove unused NameExists exception
* Remove title from strings.json
* Mock setup for import test
* Set PARALLEL_UPDATES for switch
* Move hass.data.setdefault(DOMAIN, {}) to async_setup_entry
* Add zeroconf discovery for bond integration
* Add zeroconf discovery for bond integration (fix typo)
* Add zeroconf discovery for bond integration (PR feedback)
* Add zeroconf discovery for bond integration (PR feedback)
* Add zeroconf discovery for bond integration (PR feedback)
* WOLF Smart-set integration
* Removed translations. Changed device class of timestamp. Added new test for unknown exception
* Remove unit_of_measurement from hours sensor
* Code cleanup. Pull Request comments fixes
* ConnectError import change. Removed DEVICE_CLASS_TIMESTAMP
* Add unique id guard with tests. Use common translations. Move device_id resolution to config_flow.
* Remove debug print
* First step of an EnOcean integration refactoring, including code reorganisation and support of a setup config flow
* Moved title to root of strings file
* Fixed pre-commit checks failures
* Fixed linter errors
* Updated formatted string format in logs
* Removed leftover comment
* Multiple changes after PR change requests.
Using an import flow for yaml config, removed unnecessary logs, added proper unload in __init__ and EnOceanDongle
Replaced config state machine by several flows.
Serial port validity check done in the EnOceanDongle class asynchronously, removed unique ID from config flow
Multiple cosmetic changes
* Multiple changes after PR change requests
* Added variable to store default value, as setdefault was caught returning None when the empty dict literal was passed as an argument
* Literal used directly
* Added tests for EnOcean config flows, changed static methods to bundle methods for bundle
* Updated variable name
* Added missing mock to test, replaced repeated magic strings by constants
* Changed imports to avoid an unused import warning from pylint on DOMAIN
* Adding pylint exception for unused import
* Added proper propagation of setup and unload to platforms, removed dead code, some syntax changes
* Removed setup_entry forwarding as the entities can only be configured using yaml
* Removed forwarding of unload
* Enabled code coverage for config flow only
* Clean up coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Tom Scholten <tom@sue.nl>
Co-authored-by: Tom <CoMPaTech@users.noreply.github.com>
* Initial commit for Dexcom integration
* Dexcom config flow testing
* Clarify errors during setup
* Resolve minor test issues
* Update sensor availability, resolve linting issues
* Add sensor tests
* Remove title due to 0.109, add abort
* >94.97% codecov/patch
* Move .translations/ to translations/
* Add constants for servers and unit of measurements
* Bump pydexcom version
* Updated domain schema, Dexcom creation
* Support for different units of measurement
* Update tests
* Remove empty items from manifest
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Raise UpdateFailed if fetching new session fails
* Switch everything over to required
* Simplify state information
* Simplify async_on_remove
* Pydexcom package now handles fetching new session
* Only allow config flow
* Remove ternary operator
* Bump version, pydexcom handling session refresh
* Using common strings
* Import from test.async_mock
* Shorten variable names
* Resolve tests after removing yaml support
* Return false if credentials are invalid
* Available seems to handle if data is empty
* Now using option flow, remove handling import
* Add fixture for JSON returned from API
* Overhaul testing
* Revise update options
* Bump pydexcom version
* Combat listener repetition
* Undo update listener using callback
* Change sensor availability to use last_update_success
* Update sensor availability and tests
* Rename test
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add support for config flow for Plum Lightpad integration
* add support for config flow for Plum Lightpad integration (remove unintended change to requirements_test_all.txt)
* add support for config flow for Plum Lightpad integration (fix lint issues)
* add support for config flow for Plum Lightpad integration (PR feedback)
* add support for config flow for Plum Lightpad integration (fix lint)
* Update homeassistant/components/plum_lightpad/__init__.py
use debug instead of info for logging
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use generated references instead of hard-coded strings
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use references instead of hard-coded string
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing translated title per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* remove unnecessary deepcopy
* remove unnecessary logging warning, since ignoring is expected for configuration.yaml scenario
* switch to hass.loop.create_task per PR feedback
* show login errors when configuring integration via UI (PR feedback)
* disable wrongly flag pylint violation
* add except handler to handle connection errors when setting up config flow entry
* address PR feedback regarding exception handling
* Update homeassistant/components/plum_lightpad/config_flow.py
use helper instead of custom code/message-id
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Squeezebox add config flow and player discovery
* Fixes to config flow
* Unavailable player detection and recovery
* Improved error message for auth failure
* Testing for squeezebox config flow
* Import configuration.yaml
* Support for discovery integration
* Internal server discovery
* Fix bug restoring previously detected squeezebox player
* Tests for user and edit steps in config flow
* Tests for import config flow
* Additional config flow tests and fixes
* Linter fixes
* Check that players are found before iterating them
* Remove noisy logger message
* Update requirements_all after rebase
* Use asyncio.Event in discovery task
* Use common keys in strings.json
* Bump pysqueezebox to v0.2.2 for fixed server discovery using python3.7
* Bump pysqueezebox version to v0.2.3
* Don't trap AbortFlow exception
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor validate_input
* Update squeezebox tests
* Build data flow schema using function
* Fix linter error
* Updated en.json
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update .coveragerc for squeezebox config flow test
* Mock TIMEOUT for faster testing
* More schema de-duplication and testing improvements
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Testing and config flow improvements
* Remove unused exceptions
* Remove deprecated logger message
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Implement suggestions from code review
* Add async_unload_entry
* Use MockConfigEntry in squeezebox tests
* Remove unnecessary config schema
* Stop server discovery task when last config entry unloaded
* Improvements to async_unload_entry
* Fix bug in _discovery arguments
* Do not await server discovery in async_setup_entry
* Do not await start server discovery in async_setup
* Do not start server discovery from async_setup_entry until homeassistant running
* Re-detect players when server removed and re-added without restart
* Use entry.entry_id instead of unique_id
* Update unittests to avoid patching homeassistant code
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor / update Awair integration
This commit does a few things, all in service of making the Awair
integration more modern and reliable. Specifically we do the following:
- Update to python_awair 0.1.1
- Begin using config entries / flow for setting up the integration.
- YAML support is completely removed.
- The integration now allows adding multiple Awair accounts, should a
user wish to do so (I found it _very_ useful in development).
- Group various Awair sensors into devices, using the device registry.
- Renames various sensors and treats the "dust" sensor as a particulate sensor.
- Device update rate-limits are no longer dynamically calculated; the
Awair API now separates rate-limits on a per-device basis.
- Supports sound pressure and illuminance sensors found on some Awair devices.
- We report the "awair index" for certain sensors as part of device_state_attributes.
The "index" is a subjective measure of whether or not a sensor reading
is "good" or "bad" (and to what extent). It's a component of the Awair
score, and it is useful on its own as an input for those who wish to
do things like "display this color if the value is 'bad'".
This is a breaking change, and requires updates to documentation and a
warning in the README. The breaking changes in detail, are:
- Support for all YAML configuration is removed, and users will need to
re-add the integration via the UI.
- We no longer support overriding device discovery via manual
configuration of device UUIDs. This was previously supported because
the Awair API had severe limits on the device list endpoints; however
those have since been removed.
- Gen 1 devices no longer show a "dust" sensor; rather we create a PM2.5
sensor and a PM10 sensor and just keep the values in sync. This better
reflects the sensor capabilities: it can detect particles in a range
from 2.5 -> 10, but cannot differentiate between sizes.
- Sensors are renamed as follows:
- "sensor.devicename_co2" -> "sensor.devicename_carbon_dioxide"
- "sensor.devicename_voc" -> "sensor.devicename_volatile_organic_compounds"
- "sensor.devicename_score" -> "sensor.devicename_air_quality_index"
- I've chosen to call the "Awair Score" an "air quality index" sensor,
because fundamentally the "Awair Score" and other air quality indices
(such as CAQI) do the same thing: they calculate a value based on a
variety of other inputs.
Under the hood, the integration has seen some improvements:
- We use the DataUpdateCoordinator class to handle updates, rather than
rolling our own update class.
- The code no longer tracks availability based on a timestamp returned
from the Awair service; we assert that if we have received a response
and the response has data for our device, then we are available (and
otherwise, not available). We don't need to test the actual Awair API
so heavily.
- Test coverage has been expanded to handle a variety of products that
Awair produces, not just the one I happen to own.
- Test coverage no longer concerns itself with testing behavior that is
now handled by the DataUpdateCoordinator; nor is it concerned with
ensuring that the overall component sets up and registers properly.
These are assumed to be well-tested functionaity of the core and not
things we need to re-test ourselves.
Finally - between library updates and integration updates, this
integration is well-positioned to support future updates. I have a
proof-of-concept patch for device automations, and the underlying
library now supports subclassing authentication (which clears the way
for us to use OAuth authentication for Awair).
* Wrap test fixture in mock_coro
Truthfully I'm not sure why this was passing on my local dev
environment, but I was developing with python 3.8 before. After
installing python 3.7, I was able to reproduce the CI failures and fix
them.
* Fix broken tests after #34901 and/or #34989
* Do not rename sensors so broadly
We're going to keep the sensors named as they were before, pending the
outcome of any decisions around the air_quality component and what names
should be standardized for air-quality-like devices.
If standardized names are selected (which does seem likely), then we
will update this integration to match them - at which point, it would be
a breaking change.
But for now, we'll keep names mostly identical to what users had before.
Notable in this commit is that we generate the entity_id ourselves,
rather than just allowing it to be auto-generated from the name
attribute. This allows us to provide more human friendly names, while
keeping the old format for entity ids. For example, given an Awair
device called "Living Room", we'll generate an entity id of
"sensor.living_room_voc" but show set the name of the device to "Living
Room Volatile organic compounds".
* Support import from config.yaml
We'll create a config entry from config.yaml the first time we're
loaded, and then defer to it from then on.
We ignore all keys other than the access_token, since we no longer need
to deal with per-account rate-limits (rather, everything is per-device
now).
* Add myself to CODEOWNERS
Since I wrote the initial integration, and now this re-write, it feels
appropriate for me to take care of the integration along with `danielsjf`.
* Remove name mangling
* Update homeassistant/components/awair/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address some review feedback
* Set up reauth flow in a job, rather than awaiting
* Remove unnecessary title string
* Remove unnecessary config schema checking
As pointed out in review, because this comes in via import from
`configuration.yaml`, we can rely on the `PLATFORM_SCHEMA` validation instead.
* Fix tests
* Set unique_id appropriately for legacy devices
For users who have had this integration already installed (and who have
updated their home assistant installation sometime in recent history),
we want to ensure that unique_id's are set to the same thing as before,
to facilitate the upgrade process.
To do that, we add an additional property to the `SENSOR_TYPES` dict
(`ATTR_UNIQUE_ID`) which allows us to map modern sensor names from
python_awair to what older versions called them - ie: `humidity` ->
`HUMID`. We then use that value when constructing the unique ID. This
should allow users to upgrade and not lose configuration even if entity
IDs would otherwise change (because we have changed the name format that
generates entity IDs).
One note is that for the gen1 `DUST` sensor, we have to treat it
differently. This integration used to call that a "PM2.5" sensor, but
the unique_id generated would be something like `awair_12345_DUST`. So
we special-case that sensor, and do the same thing. We do not need to
special-case the PM10 sensor for gen1 devices, because we didn't create
a PM10 sensor in the past (we do now, because the "DUST" sensor is
really a hybrid PM2.5/PM10 sensor).
* Patch async_setup_entry for two tests
* Update awair config_flow to require / use an email address for unique_id
Also, only start one re-auth flow.
* Add a few more tests, try to get coverage up.
* Add another test
* Move attribution to device_state_attributes
* Don't require email
* Switch from Union[dict, None] to Optional[dict]
* Use a mock where requested
* Fix missing constant rename
* Use async_create_task
* Bump test coverage a bit for config_flow
* s/CONF_UNIQUE_ID/UNIQUE_ID/g
* Add warning about deprecated platform config
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add discovery to NUT integration
* implement async_step_zeroconf
* Update test to make sure unique id not set
* Remove host/port import when coming from discovery, add title placeholders
* fix mis-paste
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add config_flow to the dunehd integration
* Add tests
* Run gen_requirements_all
* Fix pylint error
* Better hostname validation
* Build device info in the class
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Fix formatting for pyupgrade
* Update homeassistant/components/plugwise/__init__.py
Co-Authored-By: Robert Svensson <Kane610@users.noreply.github.com>
* Add try/except on setup
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Readd already reviewd await try/except
* Readd already reviewed config_flow
* Fix pylint
* Fix per 0.109 translations
* Remove unused import from merge
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Bump module version
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Fix pylint
* Fix per 0.109 translations
* Translations and config_flow, module version bump with required changes
* Translations and config_flow, module version bump with required changes
* Fix requirements
* Fix requirements
* Fix pylint
* Fix pylint
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Include configentrynotready on import
* Update __init__.py
* DataUpdateCoordinator and comment non-PR-platforms
* Fix reqs
* Rename devices variable in favor of entities
* Rework updates with DataUpdateCoordinator
* Peer review
* Peer review second part
* Cleanup comments and redundant code
* Added required config_flow test
* Peer review third part
* Update service was replaced by DataUpdateCoordinator
* Corrected testing, version bump for InvalidAuth, move uniq_id
* Remove according to review
* Await connect (py38)
* Remove unneccesary code
* Show only when multiple
* Improve config_flow, rename consts
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Process review comments
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add support for Elexa Guardian water valve controllers
* Zeroconf + cleanup
* Sensors and services
* API registration
* Service bug fixes
* Fix bug in cleanup
* Tests and coverage
* Fix incorrect service description
* Bump aioguardian
* Bump aioguardian to 0.2.2
* Bump aioguardian to 0.2.3
* Proper entity inheritance
* Give device a proper name
* Code review
* First cut of Rollease Acmeda Pulse Hub integration.
* Acmeda integration improvements:
- Moved common code into a base entity
- Battery level sensor added
- Localisation now working
* Added requirement for aiopulse now that it has been uploaded to PyPI.
* Exclude acmeda integration from coverage check as it relies on a hub being present.
* Fix Travis CI build issues.
* Remove unused constants.
* Remove unused group logic from cover.py
* Removed commented code from base.py
* Remove sensors (battery entities) on removal of hub.
* Remove unused groups from sensor.py
* Acmeda device and entity update made fully asynchronous using subscriptions to remove need for config polling.
* Updated aiopulse version dependency.
Removed non-functional battery charging indication.
* Rationalised common code to update entities into helpers.py
* Fix linting issue.
* Correct additional CI pylint errors.
* Index config_entries by entry_id.
Move entity loading and unloading to __init__.py
Add entry_id to dispatcher signal
Removed now unused polling code hub
Added config_flow unit tests
* Tweak to integration config_entry title.
* Bumped aiopulse module to 0.3.2.
Reduced verbosity of aiopulse module.
* Changed to using direct write of device state.
Removed old style async_step_init config_flow step.
* Remove superfluous battery_level and device_state_attributes from battery entity.
* Removal of unused strings.
Removal of unused create_config_flow helper.
Removal of stale comment.
* Remove use of shared container to track existing enities.
Moved removal and deregistration of entities to base class through use of dispatch helper.
* Fixed strings.json
* Fix incorrect use of remove instead of pop on dict.
* Add support for tilting covers, bump aiopulse version number.
* Bump aiopulse version to v0.3.4.
Fixed bug in cover supported_features.
* Bumped aiopulse version to 0.4.0
Update acmeda .coveragerc exclusions
* Removed already configured hub check from __init__.py async_setup_entry
Removed passing in hass reference to base entity class
Renamed entity async_reset to async_will_remove_from_hass
Changed device_info and properties
Migrated to CoveEntity from CoverDevice
Added dispatched_connect cleanup on hub removal
Removed unused entries from manifest
Removed override of battery icon
Renamed translations folder
* Reversed unintended change to .coveragerc
* Fixed config flow for multi-hub discovery.
* Acmeda enhancements as requested by MartinHjelmare
* Force import to connect to hub to retrieve id prior to creating entry
* Remove YAML configuration support.
* Tidied up config_flow and tests:
- removed unnecessary steps
- fixed typos
* Removed storage of hub in config_flow.
* Add config flow to gogogate2 component.
* Using a more stable gogogate api.
* Getting config flows working better by using different downstream library.
* Fixing options not getting default values.
Adding availability to cover entity.
* Simplifying return types of function.
* Address PR feedback.
* Making user config flow not abort.
* Using DataUpdateCoordinator.
* Addressing PR feedback.
* Using standard method for using hass.data
* Split auth fail test into separate tests.
* Add config flow to pi-hole
* Add config flow tests
* Change PlatformNotReady to ConfigEntryNotReady
* Improve config flow
* Add @shenxn as codeowner
* Use entity_id as unique id
* Remove .get with [] for required fields
* Remove unique id from config flow
* Replace some strings with references
* Fix api_key string
* Fix service api_key check
* Remove unused DuplicatedNameException
* New forked_daapd component
* Bunch of changes
Add config flow and zeroconf
Add zones on callback when added by server
Add password auth
Add async_play_media for TTS
Add media_image_url
Add support for pipe control/input from librespot-java
Improve update callbacks
* Refactor as per code review suggestions
Move config_flow connection testing to pypi library (v0.1.4)
Remove use of ForkedDaapdData class
Decouple Master and Zone data and functions
Add updater class to manage websocket and entity updates
* More changes as per code review
Avoid direct access to entities in tests
Bump pypi version
Mark entities unavailable when websocket disconnected
Move config tests to test_config_flow
Move full url creation from media_image_url to library
Move updater entity from master to hass.data
Remove default unmute volume option
Remove name from config_flow
Remove storage of entities in hass.data
Use async_write_ha_state
Use signal to trigger update_options
Use unittest.mock instead of asynctest.mock
* Yet more changes as per code review
Add more assertions in tests
Avoid patching asyncio
Make off state require player state stopped
Only send update to existing zones
Split up some tests
Use events instead of async_block_till_done
Use sets instead of lists where applicable
Wait for pause callback before continuing TTS
* Remove unnecessary use of Future()
* Add pipes and playlists as sources
* Add support for multiple servers
Change config options to add max_playlists+remove use_pipe_control
Create Machine ID in test_connection and also get from zeroconf
Modify hass.data storage
Update host for known configurations
Use Machine ID in unique_ids, entity names, config title, signals
* Use entry_id as basis for multiple entries
* Use f-strings and str.format, abort for same host
* Clean up check for same host
* Add integration for wiffi devices
wiffi devices are DIY board manufactured by stall.biz.
Several devices are available, e.g. a weather station (weatherman), an
indoor environmental sensor (wiffi-wz) and some more.
This intgration has been developed using a weatherman device, but should
also work for other devices from stall.biz.
* Fix pylint warning
* Use WIFFI / STALL WIFFI instead of wiffi to be consistent with stall.biz
* Don't update disabled entities.
* fix complains
- move wiffi specific code to pypi
- remove yaml configuration code
* incorporate various suggestions from code review
* fix remaining comments from Martin
* fix comments
* add tests for config flow
* fix comments
* add missing requirements for tests
* fix pylint warnings
* fix comments
* fix comments
remove debug log
rename .translations to translations
* rebase and adapt to latest dev branch
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix missing import
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: add error logging when exception is encountered checking connectivity
* lutron_caseta: tests mock bridge creation, not ha-side connectivity check
* lutron_caseta: catch more specific Error types while checking bridge conn.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial commit for BSBLan Climate component
The most basic climate functions work.
* Delete manifest 2.json
wrongly added to commit
* fix incorrect name
current_hvac_mode
* update coverage to exclude bsblan
* sorted and add configflow
* removed unused code, etc
* fix hvac, preset mix up
now it sets hvac mode to none and preset to eco
* fix naming
* removed commented code and cleaned code that isn't needed
* Add test for the configflow
* Update requirements
fixing some issues in bsblan Lib
* Update coverage file to include configflow bsblan
* Fix hvac preset is not in hvac mode
rewrote how to handle presets.
* Add passkey option
My device had a passkey so I needed to push this functionality to do testing
* Update constants
include passkey and added some more for device indentification
* add passkey for configflow
* Fix use discovery_info instead of user_input
also added passkey
* Fix name
* Fix for discovery_info[CONF_PORT] is None
* Fix get value CONF_PORT
* Fix move translation to new location
* Fix get the right info
* Fix remove zeroconf and fix the code
* Add init for mockConfigEntry
* Fix removed zeroconfig and fix code
* Fix changed ClimateDevice to ClimatEntity
* Fix log error message
* Removed debug code
* Change name of device.
* Remove check
This is done in the configflow
* Remove period from logging message
* Update homeassistant/components/bsblan/strings.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add passkey
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add integration for Flick Electric NZ
* Start adding Config Flow and external API
* Second Wave of Config Flow and API implementation
* Fix test (errors is None instead of blank array?)
* Don't update sensor if price is still valid
* Add input validation
* Fix linting for DOMAIN
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove platform schema (config is by entries only)
* Don't catch AbortFlow exception
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update test
* Re-arrange try-catch in config flow
* Fix linting in sensor.py
* Staticly define list of components
* Fix test exceptions
* Fix _validate_input not being awaited
* Fix tests
* Fix pylint logger
* Rename test and remove print debug
* Add test for duplicate entry
* Don't format string in log function
* Add tests __init__ file
* Remove duplicate result assignment
* Add test for generic exception handling
* Move translations folder
* Simplify testing
* Fix strings/translation
* Move to "flick_electric" as domain
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ISY994 Add Config and Options Flow
Add tests for config flow
Fix test
Update Tests
* Fix merge errors
* Update homeassistant/components/isy994/strings.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix patching in tests to not actually start Home Assistant
Co-authored-by: J. Nick Koston <nick@koston.org>
* Initial version.
* Tests.
* Refactored tests.
* Update requirements_all
* Increase test coverage. Catch exception.
* Update .coveragerc
* Fix lint msg.
* Tweak test (more to force CI build).
* Update based on PR comments.
* Change unique_id to use stable string.
* Add Universal Powerline Bus "link" support.
* Fix missed call.
* Revert botched merge.
* Update homeassistant/components/upb/light.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Three changes.
Update service schema to require one of brightness/brightness_pct.
Fix bug in setting brightness to zero.
Replace async_update_status and replace with async_update.
Co-authored-by: J. Nick Koston <nick@koston.org>
Kevin Eifinger
Thomas Schamm
J. Nick Koston
indykoning
Gleb Sinyavskiy
Maciej Bieniek
Aidan Timson
Rob Bierbooms
Tom Toor
Simone Chemelli
Dermot Duffy
Guido Schmitz
bsmappee
corneyl
Paulus Schoutsen
René Klomp
Ludovico de Nittis
RenierM26
stegm
Raman Gupta
Dylan Gore
Ruslan Sayfutdinov
David F. Mulcahey
chemaaa
scyto
Kevin Worrel
Franck Nijhof
Khole
Nathan Tilley
MeIchthys
Jon Caruana
Nathan Spencer
Diogo Gomes
Garrett
Milan Meulemans
Ilja Leiko
Matt Zimmerman
Andrey Kupreychik
Álvaro Fernández Rojas
ollo69
Joakim Plate
Pascal Reeb
functionpointer
Brandon Rothweiler
Pascal Reeb
springstan
Dennis Schroer
William Scanlon
Robert Svensson
Penny Wood
Sergio Conde Gómez
Charles Garwood
JeromeHXP
J.P. Krauss
Chris Talkington
rikroe
Tim van Cann
Emily Mills
Pierre Ståhl
Ron Klinkien
starkillerOG
Brig Lamoreaux
David
Aaron Bach
djtimca
Pawel
epenet
Ville Skyttä
Clifford Roche
Jason Hunter
Brett
Gabe Cook
Erik Montnemery
Martin Hjelmare
tkdrob
Oliver Acevedo
Robert Van Gorkom
Xiaonan Shen
AJ Schmidt
Evgeny
Arda ŞEREMET
Andrew Marks
Leonardo Figueiro
On Freund
Eric Severance
Felipe Martins Diel
Graham Wetzler
Greg Dowling
Tom Harris
Jc2k
Marcio Granzotto Rodrigues
Quentame
Peter Nijssen
James Hilliard
Eugene Prystupa
Adam Król
lawtancool
jduquennoy
Baptiste Candellier
Bouwe Westerdijk
Gage Benne
Haemish Kyd
Oscar Calvo
rajlaud
Andrew Hayworth
Ian Harcombe
Tom Schneider
Rami Mosleh
Fredrik Erlandsson
Tom
Daniel Høyer Iversen
Alan Murray
Kevin Fronczak
uvjustin
Steffen Zimmermann
Chris Aljoudi
Willem-Jan
Brynley McDonald
shbatm
Glenn Waters