* Deprecate explicit entity_id in template platforms
* Use config validator for deprecation
* Fix copy/paste typos
* Also print the config value
* Add test for config validator
* Assert the module name that logged the message
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
* Allow disabling the DoorBird camera live view
* Support for push notifications from DoorBird devices
* use DoorBirdPy 0.1.1 instead of 0.1.0
* Fix lint errors in DoorBird binary sensor
* Change DoorBird push notifications from binary sensor to event
* Remove DoorBird camera options
* use DoorBirdPy 0.1.2 to fix history image urls
* clean up doorbird event code and remove unused doorbird camera imports
* use async for doorbird doorbell events
* Minor changes
* Update file header
* Fix my mess
* Fix docstring
Leak sensors were using the "wet" node as a negative node, which prevented them from ever gettng a Dry status unless the user pressed the button on the hardware after every Hass reboot.
This change ignores the Wet node, as it is just always the exact inverse of the Dry node. We don't need to watch both.
* Huge ISY994 platform cleanup, fixes support for 5.0.10 firmware
# * No more globals - store on hass.data
# * Parent ISY994 component handles categorizing nodes in to Hass components, rather than each individual domain filtering all nodes themselves
# * Remove hidden string, replace with ignore string. Hidden should be done via the customize block; ignore fully prevents the node from getting a Hass entity
# * Removed a few unused methods in the ISYDevice class
# * Cleaned up the hostname parsing
# * Removed broken logic in the fan Program component. It was setting properties that have no setters
# * Added the missing SUPPORTED_FEATURES to the fan component to indicate that it can set speed
# * Added better error handling and a log warning when an ISY994 program entity fails to initialize
# * Cleaned up a few instances of unecessarily complicated logic paths, and other cases of unnecessary logic that is already handled by base classes
* Use `super()` instead of explicit base class calls
* Move `hass` argument to first position
* Use str.format instead of string addition
* Move program structure building and validation to component
Removes the need for a bunch of duplicate exception handling in each individual platform
* Fix climate nodes, fix climate names, add config to disable climate
Sensor platform was crashing when the ISY reported climate nodes. Logic has been fixed. Also added a config option to prevent climate sensors from getting imported from the ISY. Also replace the underscore from climate node names with spaces so they default to friendly names.
* Space missing in error message
* Fix string comparison to use `==`
* Explicitly check for attributes rather than catch AttributeError
Also removes two stray debug lines
* Remove null checks on hass.data, as they are always null at this point
* Store raw state of RF sensors from alarmdecoder
* Fix resync. Fix issue with RFID not being truly optional
* Breakdown RF attributes per bit
* Preserve import style
* Fix detection of if a negative node is in use
Fix a problem where every negative node gets detected as in-use. Code was not checking the correct property.
* Allow protected access
* Extend Threshold binary sensor to support ranges
- Adds support for ranges
- Threshold type (lower, upper, range) is defined by supplied
thresholds (lower, upper)
- Adds verbose status/position relative to threshold as attribute
(position)
* Minor changes (ordering, names, etc.)
* Update name
* Update name
* Fire events for ISY994 control events
This allows hass to react directly to Insteon button presses (on switches and remotes), including presses, double-presses, and long holds
* Move change event subscription to after entity is added to hass
The event handler method requires `self.hass` to exist, which doesn't have a value until the async_added_to_hass method is called. Should eliminate a race condition.
* Overhaul binary sensors in ISY994 to be functional "out of the box"
We now smash all of the subnodes from the ISY994 in to one Hass binary_sensor, and automatically support both paradigms of state reporting that Insteon sensors can do. Sometimes a single node's state represents the sensor's state, other times two nodes are used and only "ON" events are sent from each. The logic between the two forunately do not conflict so we can support both without knowing which mode the device is in.
This also allows us to handle the heartbeat functionality that certain sensors have - we simply store the timestamp of the heartbeat as an attribute on the sensor device. It defaults to Unknown on bootup if and only if the device supports heartbeats, due to the presence of subnode 4.
* Parse the binary sensor device class from the ISY's device "type"
Now we automatically know which sensors are moisture, motion, and openings! (We also reverse the moisture sensor state, because Insteon reports ON for dry on the primary node.)
* Code review tweaks
The one material change here is that the event subscribers were moved to the `async_added_to_hass` method, as the handlers depend on things that only exist after the entity has been added.
* Handle cases where a sensor's state is unknown
When the ISY first boots up, if a battery-powered sensor has not reported in yet (due to heartbeat or a change in state), the state is unknown until it does.
* Clean up from code review
Fix coroutine await, remove unnecessary exception check, and return None when state is unknown
* Unknown value from PyISY is now -inf rather than -1
* Move heartbeat handling to a separate sensor
Now all heartbeat-compatible sensors will have a separate `binary_sensor` device that represents the battery state (on = dead)
* Add support for Unknown state, which is being added in next PyISY
PyISY will report unknown states as the number "-inf". This is implemented in the base ISY994 component, but subcomponents that override the `state` method needed some extra logic to handle it as well.
* Change a couple try blocks to explicit None checks
* Bump PyISY to 1.1.0, now that it has been published!
* Remove -inf checking from base component
The implementation of the -inf checking was improved in another branch which has been merged in to this branch already.
* Restrict negative-node and heartbeat support to known compatible types
Not all Insteon sensors use the same subnode IDs for the same things, so we need to use different logic depending on device type. Negative node and heartbeat support is now only used for leak sensors and open/close sensors.
* Use new style string formatting
* Add binary sensor detection for pre-5.x firmware
Meant to do this originally; writing documentation revealed that this requirement was missed!
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f823.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Add attribute to show who last un/set alarm.
This allows showing the name of the SPC user who last
issued an arm/disarm command and also allows for
automations to depend on this value.
* Optimize
* Update spc.py
* Update spc.py
* fix
* Fix test.
* Fix for removed is_state_attr.
* Simplified URL expiration calculation and fixed refresh method
* Remove support from Ring from StickupCams or floodlight cameras
* Makes lint happy
* Removed unecessary attributes
* Initial commit of Vultr components
Have a working Vultr hub and binary sensor which pulls down the
following attributes of your VPS:
- Date created
- Subscription id (server id)
- Cost per month (in US$)
- Operating System installed
- IPv4 address
- label (human readable name)
- region
- number of vcpus
- which storage package chosen
- IPV6 address (if applicable)
- RAM amount
Working next on sensor and then testing / coverage.
* Added Vultr sensor for pending charges and current bandwidth. Refactored binary_sensor and hub too
* Corrected is_on bases
* Added basic tests for Vultr binary & platform
* Updated require files
* Changing test fixture to highlight different cases
* Written basic test for sensor.vultr
* Resolved linting errors and broken test
* Increase test coverage and corrected docs
* Resolved hound issues
* Revert back negative binary test
* Another hound resolve
* Refactoring and adding is switch, moving over to vultr branch
* Made Vultr components more resiliant to invalid configs
* Added negetive test for vultr binary sensor
* Added better testing of vultr sensor
* Resolved vultr platform test affecting subsequent vultr tests
* Moving VULTR components to single use design
* Added in sensor name config
* Added missing sensors var
* Resolved init data setting of sensors, added in name conf to switch
* Made the Vultr component more resiliant to startup failure with better alerting
* Various Vultr component changes
- Refactored sensor, binary_sensor, and switch to reference one subscription
- Renamed CURRENT_BANDWIDTH_GB monitored condition to CURRENT_BANDWIDTH_USED
- Improved test coverage
* Resolved local tox linting issue
* Added more testing for Vultr switch
* Improved test coverage for Vultr components
* Made PR comment changes to vultr binary sensor
* Made PR comment changes to Vultr sensor
* resolved PR comments for Vultr Switch
* Resolved vultr sensor name and improved tests
* Improved Vultr switch testing (default name formatting)
* Removed vultr hub failure checking
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Added Base Support for Linode
* Removed unused Attr
* Corrected some Typos
* updated requirements & coveragerc
* added import to prevent var not declared errors in linter
* Fixed Typo
* Added Switch Component for Linode and corrected some errors if data was blank
* Updated api lib to hopefully remove dependancy on enum34
* Fixed Reference error
* fix pylint errors
* Update linode.py
* Update linode.py
* Update linode.py
* Update linode.py
* Trend sensor now uses linear regression to calculate trend
* Added numpy to trend sensor test requirements
* Added trendline tests
* Trend sensor now has max_samples attribute
* Trend sensor uses utcnow from HA utils
* Trend sensor now completes setup in async_added_to_hass
* Fixed linter issues
* Fixed broken import
* Trend tests make use of max_samples
* Added @asyncio.coroutine decorator to trend update callback
* Update trend.py
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Serial number is the only unique identifier, checks are still needed
* No async for setup_device
* Bump axis to 13 in preparation of friday the 13th
* Fix review comments
* Removed async after some discussions with @armills.
It wasn't possible to get past that aiohttp doesnt support digest auth, which makes it impossible to convert the full library at this point in time.
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.
* Fix missing timeout for Netatmo binary sensor
This fix also merges timeout and offset because there were the same thing
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Fix lint errors
* Fix style
Bob Anderson
Dan Nixon
Anders Melchiorsen
Paulus Schoutsen
cdce8p
Fabian Affolter
Julius Mittenzwei
hawk259
Kane610
Andy Castille
Matt Schmitt
Greg Laabs
PhracturedBlue
CTLS
Adam Mills
Alan Fischer
Stefan Lehmann
Daniel Perna
Rendili
Alok Saboo
Martin Berg
Marcelo Moreira de Mello
Simon
Adam Cooper
David Grant
Ryan McLean
Yannick POLLART
Daniel Høyer Iversen
Rasmus
Sam Birch
Fabian Affolter
Sebastian Muszynski
Pascal Vizeli
Hugo Dupras
William Scanlon
Sergey Isachenko