* initial version of qfes bushfire geolocation platform
* removed all occurrences of legally protected names; using new georss library
* regenerated codeowners
* fixed pylint
* added one more valid category
* moved library import to top and ran isort
* Update aioswitcher requirement to 2019.4.26.
* Removed unnecessary legacy function call.
* Fixed log message capital first letter.
* Replaced None argument with empty dict.
* Replaced guard.
* Added ServiceCallType.
* Added set_auto_off and update_device_name services to the component.
* Added test cases for service calls.
* Conditioned the component services registry with the platform discovery.
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Resolved change requests.
* Added ContextType.
* Addes permission verification for service calls.
* Added test cases for permision verification and more.
* Replaced POLICY_CONTROL with the more suited POLICY_EDIT.
* More appropriate function name.
* Added domain and entity_id validation for calling services.
* Removed service for setting the vendor's device name.
* Support ZLO device types
Support the device types that are added in https://github.com/zigpy/zigpy/pull/176
so newer Zigbee devices can be supported.
* Remove BINARY_SENSOR mappings
* Add back ON_OFF_LIGHT_SWITCH, DIMMER_SWITCH and COLOR_DIMMABLE_LIGHT
Since they are target devices I've added them as switch and lights,
which matches the Zigbee documentation.
* Upgrade to zigpy-homeassistant v0.5.0
To be able to use the new DeviceTypes
* Add APRS device tracker component
This component keeps open a connection to the APRS-IS infrastructure so
messages generated by filtered callsigns can be immediately acted upon.
Any messages with certain values for the 'format' key are position
reports and are parsed into device tracker entities.
* Log errors and return if startup failure
* Fix unit tests
* CREATE Somfy component
* CREATE cover Somfy platform
* USE somfy id as unique id
* UPDATE all the devices in one call to limit the number of call
* FIX Don't load devices if not yet configured
* IMP Replace configurator by a simple notification
* ADD log in case state does not match
* IMP wording
* REMOVE debug stuf
* ADD support for tilt position
* UPDATE requirements
* FIX Use code instead of authorization response
- Will allow to setup Somfy without https
* HANDLE stateless devices (Somfy RTS)
* FIX import locally 3rd party library
* UPDATE pymfy to 0.4.3
* ADD missing docstring
* FIX For Somfy 100 means closed and 0 opened
* FIX position can be None
* ENHANCE error management when error 500 occurs at setup
* FIX indent
* ROLLBACK tilt modification
- See https://community.home-assistant.io/t/somfy-tahoma-official-api/61448/90?u=tetienne
* FIX Look for capability instead of state
* DON'T use exception to test if a feature is available
* UPDATE dependency
* ADD device_info property
* AVOID object creation in each method
* REMOVE unused constants
* ADD missing doc
* IMP Only make one call to add_entities
* USE dict[key] instead of get method
* IMP Don't pass hass object to the entities
* FIX Don't end logging messages with period
* USE config entries instead of a cache file
* IMPLEMENT async_unload_entry
* CONSOLIDATE package
- see home-assistant/architecture#124
* UPDATE to pymfy 0.5.1
* SIMPLIFY config flow
* ADD French translation
* FIX 80 vs 79 max length
* ABORT flow asap
* FIX A tupple was returned
* MIGRATE to manifest.json
* ADD a placeholder async_setup_platform coroutine
- It's currently required and expected by the platform helper.
* FIX codeowner
* ADD missing translations file
* USE new external step
* UPGRADE pymfy version
* Close Somfy tab automatically
* ADD manufacturer
- Somfy only for the moment.
* HANDLE missing code or state in Somfy request
* REMOVE unused strings
* DECLARE somfy component to use config_flow
* APPLY static check remarks
* FIX async method cannot be called from sync context
* FIX only unload what has been loaded during entry setup
* DON't catch them all
* DON'T log full stacktrace
* ABORT conflig flow if configuration missing
* OMIT Somfy files for coverage
* ADD tests about Somfy config flow
* ADD pymfy to the test dependencies
* Adds AdGuard Home integration
* 👕 Addresses linting warnings
* 🚑 Fixes typehint in async_setup_entry
* 👕 Take advantage of Python's coalescing operators
* 👕 Use adguard instance from outer scope directly in service calls
* 👕 Use more sensible scan_interval default for sensors
* 👕 Adds specific files to .coveragerc
* ☔ Added tests and small changes to improve coverage
* 🔨 Import adguardhome dependencies at the top
* 🚑 Converted service handlers to be async
* 🔥 Removed init step from config flow
* Revert back to previously used library
* Fix test
* Remove unused import
* Fix import
* Update __init__.py
* Update __init__.py
* Fix test after rebase
* Use global import for ESPHome
* Add aioesphomeapi to test requirements
aioesphomeapi is also shipped as a pure-python wheel, so this should not impact test install time
* Improved sensors
* Lib update signalling
* Replace reason with changed
* Move imports to top of file
* Add support for secondary temperature reported by some Xiaomi devices
* Bump dependency to v59
* Proof of concept
* Follow comments
* Fix line length and bad imports
* Move imports to top
* Exception handling for unicode decoding
Create debug print for new service types
Add empty test files
* First try at a test
* Add type and name to service info
Fix static check
* Add aiozeroconf to test dependencies
* ptvsd debugger component.
* Add test case
* ptvsd as test dependency
* Fix for 3.5
* Fixed bootstrap test
* Use dict direct lookup.
* Don't need to load dependencies.
* Get the test working.
* 3.5 fix
* Set mock return value
* Put tests back, but skip them
* Change log level
* Implement EnOcean temperature and humidity sensors.
* Bump EnOcean version to 0.50
* Refactor components for more generic device handling
* Move radio packet data interpretation to specific devices
* Update CODEOWNERS
* Implement code review changes
* Added component named switcher_kis switcher water heater integration.
* Fixed conflicts.
* Updated requirements.
* Added manifest.json file and updated CODEOWNERS.
* Fixed requirements_all.txt.
* Better component tests.
* Removed unnecessary parameter from fixture function.
* Removed tests section from mypy.ini.
* Remove unused ENTITY_ID_FORMAT.
* Stop udp bridge when failed to setup the component.
* Replace DISCOVERY_ constants prefix with DATA_.
* Various change requests.
* Fixed constant name change remifications.
* Added explicit name to fixture.
* Various change requests.
* More various change requests.
* Added EventType for homeassistant.core.Event.
* Switched from event driven data distribution to dispatcher type plus clean-ups.
* Removed name and icon keys from the component configuration.
* Various change requests.
* Various change reqeusts and clean-ups.
* Removed unnecessary DEPENDENCIES constant from swith platform.
* Replaced configuration data guard with assert.
* Removed unused constants.
* Removed confusing type casting for mypy sake.
* Refactor property device_name to name.
* Removed None guard effecting mypy only.
* Removed unnecessary function from switch entity.
* Removed None guard in use by mypy only.
* Removed unused constant.
* Removed unnecessary context manager.
* Stopped messing around with mypy.ini.
* Referring to typing.TYPE_CHECKING for non-runtime imports.
* Added test requierment correctyly.
* Replaced queue.get() with queue.get_nowait() to avoid backing up intervals requests.
* Revert changes in mypy.ini.
* Changed attributes content to device properties instead of entity properties.
* Fixed typo in constant name.
* Remove unnecessary async keyword from callable.
* Waiting for tasks on event loop to end.
* Added callback decorator to callable.
* Load dependencies from manifests. Fallback to current DEPENDENCIES
* Fix typing
* Ignore typing correctly
* Split out dependency processing to a new method
* Fix tests
* Only pull from manifest if dependencies is non empty
* Inline temporary function
* Fix light tests [skip ci]
* Fix tests/common
* Fix some mqtt tests [skip ci]
* Fix tests and component manifests which have only one platform
* Fix rflink tests
* Fix more tests and manifests
* Readability over shorthand format
* Fix demo/notify tests
* Load dependencies from manifests. Fallback to current DEPENDENCIES
* Load requirements from manifests. Fallback to current REQUIREMENTS
* Fix typing
* Ignore typing correctly
* Split out dependency processing to a new method
* Only pull from manifest if dependencies is non empty
* Inline temporary function
* Fix tests and component manifests which have only one platform
* Fix rflink tests
* Readability over shorthand format
* Clean up requirements
* Use integration to resolve deps/reqs
* Lint
* Lint
* revert a change
* Revert a test change
* Fix types
* Fix types
* Add back cache for load component
* Fix test_component_not_found
* Move light.test and device_tracker.test into test package instead with manifest to fix tests
* Fix broken device_tracker tests
* Add docstrings to __init__
* Fix all of the light tests that I broke earlier
* Embed the test.switch platform to fix other tests
* Embed and fix the test.imagimage_processing platform
* Fix tests for nx584
* Add dependencies from platform file's DEPENDENCIES
* Try to setup component when entity_platform is setting up
Fix tests in helpers folder
* Rewrite test_setup
* Simplify
* Lint
* Disable demo component if running in test
Temp workaround to unblock CI tests
* Skip demo tests
* Fix config entry test
* Fix repeat test
* Clarify doc
* One extra guard
* Fix import
* Lint
* Workaround google tts
## Description:
Generate requirements_* from manifests (if present). If not, fallback to the current approach of reading `REQUIREMENTS` from the module attribute. I disabled exploring the children of the `homeassistant.components.*` packages since that will just add a dependency (from the manifest) due to each of the python files in the package. Just having one for the top level package should be sufficient.
**Related issue (if applicable):** relates to #22700
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
Co-authored-by: Jason Hu <awaregit@gmail.com>
* Use latest client library, evohomeclient v0.3.1
* Fix issue #22097: Failed to call service climate/turn_on...
* BUGFIX: handle case where a Zone doesn't have a temperature
* BUGFIX: missing exception handler, and inappropriate delint hints
* Improve exception handling, and also better messages
* improve code (REDACT secrets); remove TODOs
* minor refactor - improve error message
* more refactoring - improve error message
* remove TODOs
* update to latest evohomeclient library
* Use latest client library, evohomeclient v0.3.1
* Fix issue #22097: Failed to call service climate/turn_on...
* BUGFIX: handle case where a Zone doesn't have a temperature
* BUGFIX: missing exception handler, and inappropriate delint hints
* Improve exception handling, and also better messages
* improve code (REDACT secrets); remove TODOs
* minor refactor - improve error message
* more refactoring - improve error message
* remove TODOs
* update to latest evohomeclient library
* fix requests for houndci-bot
* Tidy up requests exception handling
* Correct lint error
* update to latest client library
* minor de-lint
* more cleanup of exceptions, messages
* refactored for new exception
* fix error in requirements*_all.txt
* de-lint
* delint unused import
* import 3rd-party library only inside methods
* change honeywell tests
* delint, fix typo
* we dont log usernames, passwords, etc.
* de-lint
* initial commit
initial commit
rewrite tests
fix merge issue with fan component
fix merge issue with fan component
* correct line length
* change to sync_setup_component for tests
* rename services and move services.yaml
* move hepa and carbon filter state from sensor to fan
* add test for duplicate entities
* fix method call tests
* fix docstring
* Add select source support
* Review feedback changes
* Removed unused import
* Ignore 'umused' import used in typing
* Only include trace back on useful errors
* Remove return from play_source
* The Great Migration
* removed outdated tests
* Upgraded enturclient to v0.2.0
- client has gone async
- configurable if non boarding departures should be omitted from result
- configurable how many departures should be shown
- more clear which attributes are included and when
* reduced nesting and clearing of attributes
* Removed test data
* ensure attribution and stop id in attributes
* docstring fixes
* fix rebase errors
went a bit too fast on continue on one of the conflicts..
* fix test requirements comment from gen
* Initial draft
* Add tests for init
Fix hound comments
* Add tests for device
Change parameter handling to make device easier to test
* Remove superfluous functionality per Martins request
* Fix hound comments
* Embedded platforms
* Fix device import
* Config flow retry
* Options default values will be set automatically to options in config entry before component can be used
* Clean up init
Add populate options
Fix small issues in config flow
Add tests covering init
* Improve device tests
* Add config flow tests
* Fix hound comments
* Rebase miss
* Initial tests for binary sensors
* Clean up
More binary sensor tests
* Hound comments
* Add camera tests
* Fix initial state of sensors
* Bump dependency to v17
* Fix pylint and flake8
* Fix comments
* Moved climate components with tests into platform dirs.
* Updated tests from climate component.
* Moved binary_sensor components with tests into platform dirs.
* Updated tests from binary_sensor component.
* Moved calendar components with tests into platform dirs.
* Updated tests from calendar component.
* Moved camera components with tests into platform dirs.
* Updated tests from camera component.
* Moved cover components with tests into platform dirs.
* Updated tests from cover component.
* Moved device_tracker components with tests into platform dirs.
* Updated tests from device_tracker component.
* Moved fan components with tests into platform dirs.
* Updated tests from fan component.
* Moved geo_location components with tests into platform dirs.
* Updated tests from geo_location component.
* Moved image_processing components with tests into platform dirs.
* Updated tests from image_processing component.
* Moved light components with tests into platform dirs.
* Updated tests from light component.
* Moved lock components with tests into platform dirs.
* Moved media_player components with tests into platform dirs.
* Updated tests from media_player component.
* Moved scene components with tests into platform dirs.
* Moved sensor components with tests into platform dirs.
* Updated tests from sensor component.
* Moved switch components with tests into platform dirs.
* Updated tests from sensor component.
* Moved vacuum components with tests into platform dirs.
* Updated tests from vacuum component.
* Moved weather components with tests into platform dirs.
* Fixed __init__.py files
* Fixes for stuff moved as part of this branch.
* Fix stuff needed to merge with balloob's branch.
* Formatting issues.
* Missing __init__.py files.
* Fix-ups
* Fixup
* Regenerated requirements.
* Linting errors fixed.
* Fixed more broken tests.
* Missing init files.
* Fix broken tests.
* More broken tests
* There seems to be a thread race condition.
I suspect the logger stuff is running in another thread, which means waiting until the aio loop is done is missing the log messages.
Used sleep instead because that allows the logger thread to run. I think the api_streams sensor might not be thread safe.
* Disabled tests, will remove sensor in #22147
* Updated coverage and codeowners.
* Consolidate
* Fix tests
* Update imports
* Fix import
* Use importlib because integration and package share name
* Fix more tests
* Update .coveragerc and CODEOWNERS
* initial commit of streams
* refactor stream component
* refactor so stream formats are not considered a platform
* initial test and minor refactor
* fix linting
* update requirements
* need av in tests as well
* fix import in class def vs method
* fix travis and docker builds
* address code review comments
* fix logger, add stream start/stop logs, listen to HASS stop
* address additional code review comments
* beef up tests
* fix tests
* fix lint
* add stream_source to onvif camera
* address pr comments
* add keepalive to camera play_stream service
* remove keepalive and move import
* implement registry and have output provider remove itself from stream after idle, set libav log level to error
* Initial pass of a mobile_app component
* Fully support encryption, validation for the webhook payloads, and other general improvements
* Return same format as original API calls
* Minor encryption fixes, logging improvements
* Migrate Owntracks to use the superior PyNaCl instead of libnacl, mark it as a requirement in mobile_app
* Add mobile_app to .coveragerc
* Dont manually b64decode on OT
* Initial requested changes
* Round two of fixes
* Initial mobile_app tests
* Dont allow making registration requests for same/existing device
* Test formatting fixes
* Add mobile_app to default_config
* Add some more keys allowed in registration payloads
* Add support for getting a single device, updating a device, getting all devices. Also change from /api/mobile_app/register to /api/mobile_app/devices
* Change device_id to fingerprint
* Next round of changes
* Add keyword args and pass context on all relevant calls
* Remove SingleDeviceView in favor of webhook type to update registration
* Only allow some properties to be updated on registrations, rename integration_data to app_data
* Add call service test, ensure events actually fire, only run the encryption tests if sodium is installed
* pylint
* Fix OwnTracks test
* Fix iteration of devices and remove device_for_webhook_id
* 🚜 Rewrite of Toon component
* 🔥 Removed manual state from list
* 👕 Addresses code review comments
* 🔥 Removes a log line that should not have been left behind
* 👕 Addresses linting warnings
* 👕 Addresses Hound CI warning
* 👕 Fixes small code styling issues
* ✨ Sets an appropriate SCAN_INTERVAL
* ✨ Sets min/max temperature for climate platform
* 👕 Makes imports more consistent with codebase
* 🚑 Fixes incorrect SCAN_INTERVAL value in climate platform
* 🚑 Uses OrderedDict for config_flow schema
* 👕 Adds return types for min/max temp
* 🚜 Refactors entities into their actual devices
* ⬆️ Updates toonapilib to 3.0.7
* 🚜 Refactors binary sensor state inversion
* 🚑 Fixes states of OpenTherm connection and Hot Tap Water
* ✨ Adds Boiler Preheat binary sensor
* ✨ Adds Toon Thermostat Program binary sensor
* ✨ Adds Boiler Modulation Level sensor
* ✨ Adds Daily Power Cost sensor
* 🔥 Cleanup of Toon Thermostat climate attributes
* 🚜 Adjusts config_flow with Tenant selection
* 🙋 Adds myself to codeowners file as maintainer
* ⬆️ Gen requirements
* ⬆️ Updates toonapilib to 3.0.9
* ☔ Adds config_flow tests
* {switch,light}.tplink: use deviceid as unique id, fetch name from the device during initialization
* raise PlatformNotReady when no device is available
* Use mac instead of deviceid
* remove name option as obsolete
* Add support for configuration flow / integration
Allows activating automatic discovery of supported devices from the configuration
* Fix linting, update requirements_all.txt
* start cleaning up tplink component based on feedback
* add device info, improve config handling
* Allow overriding detected devices via configuration file
* Update requirements.txt
* Remove debug logging
* make hound happy
* Avoid I/O during init and simplify the code, remove remains of leds_on
* Fix issues based on feedback, use consistent quotation marks for device info
* add async_setup_platform emiting a deprecation warning
* Avoid blocking the I/O, check for None on features
* handle some Martin's comments, schema-validation is still missing
* use async_create_task instead of async_add_job, let core validate the schema
* simplify configuration handling by storing the configuration data separately from initialized instances
* add default values to schema, make hound happy
* with defaults set by schema, simplify the checks. add async_unload_entry
* Use constant for data structure access
* REWORD add a short note about async_unload_entry
* handle feedback from Martin, config_data is checked against Noneness
* use pop to remove the domain on unload
* First steps to add tests for the new tplink component
* embed platforms under the component directory
* Fix tests by mocking the pyhs100 internals
* Fix linting
* Test against multiple instances of devices, tidy up
* (hopefully) final linting round
* Add pyHS100 to test requirements
* log always the warnings occured during an update to make them easy to see
* revert back the warning behavior (requirement for silver level in IQS)
* Unload only when an entry is being loaded and add tests for that
Thanks @MartinHjelmare for pointing this out!
* Fix linting
* Bump the upstream lib, fixes most prominently the HSV setting on bulbs
* Test unloading for all platforms, clear the data storage instead of popping it out, making it possible to reconfigure after removal without restarting hass first
* Use class variables instead of instance variables for bulb states, required for HS220
* Use new-style format string
* Fix indenting, uppercase the mock constant
* Run black on test_init, hopefully that will finally fix the weird formatting (pycharm, pylint and hound seems to have different opinions...)
* Add a prompt if bridge update is available.
* Change logger warning for light update
The self.light.swupdatestate only checks for updates of that specific light, it does not check for updates of the bridge.
Theirfore the warning message schould be updated.
* add space
* fix tests
* rename to swupdate2_bridge_state
* update aiohue to v1.9.1
* update aiohue to v1.9.1
* update aiohue to v1.9.1
* Improve component setup error logging/notification
* Prevent capabilities from being represented my multiple platforms
* Improved logging of received updates
* Updates based on review feedback
* Add ffmpeg version
* Add ffmpeg stream content type
* Change ffmpeg camera stream content type
* Change ffmpeg stream content type
* Lint
* Add a none guard
* Fix
* Fix
* Update onvif.py
* Fix version match regrex
* Fix regrex
* Upgrade ha-ffmpeg to 1.11
* Lint
* Get ffmpeg version in ffmpeg component setup
* start test setup
test cleanup
test deps
update switch test
actually update test deps
cleanup and remove switch from coveragerc
comment
refactor to use fixtures and shared components
lint
* remove availability part that isn't in zha yet
* review comments and cleanup
* review comments
* add switch back unil post reorg merge
* Added SmartThings component and switch platform
* Corrected comment typos.
* Embedded switch platform.
* Replaced custom view usage with webhook component.
* Replaced urls with tokens in strings.
* Fixed line length.
* Use generated webhook id instead of static one.
* Reuse core constant instead of defining again.
* Optimizations in anticipation of future platforms.
* Use async_generate_path instead of hard-coded path.
* Fixed line length.
* Updates per review feedback.
* Updates per latest review feedback.
* Moving existing sensor file
* Initial functionality in place
* Added test for config flow
* Updated coverage and CODEOWNERS
* Linting
* Linting
* Member comments
* Hound
* Moving socket disconnect on HASS stop
* Member comments
* Removed unnecessary dispatcher call
* Config entry fix
* Added support in config flow for good accounts with no devices
* Hound
* Updated comment
* Member comments
* Stale docstrings
* Stale docstring
* Add a test for a homekit_controller switch
* Add a test for a homekit_controller lightbulb
* Add a test for homekit_controller thermostat
* Changes from review
* Patch utcnow to known time in HK tests
* Neater fixture use per review
* fix for smoke detection
* a tilted window is now considered as "open"/on
* changed comparison to enum
* line length
* insert brackets for line length and comparison
* indentation should now be ok for hound
changed api version to 0.10.4
* indentation should now be ok for hound
changed api version to 0.10.4
* updating requirement files
* satisfy lint
* Added device tracker support for EE Brightbox 2
* removed timeago dependency
* get scanner checks and improved tests
* fixed lint issues
* removed redundant timeago from test requirements
* fixed variable naming in test
* removed unecessary blank line
* Add gamut capability to color util
* Include gamut in hue_test
* Improve Philips Hue color conversion
* correct import for new location hue.light
* include file changes between PR's
* update aiohue version
* update aiohue version
* update aiohue version
* fix hue_test
Now Idea why it failed compared to the previous time
* Include gamut in hue_test
* fix hue_test
* Try to test hue gamut conversion
supply a color that is well outside the color gamut of the light, and see if the response is correctly converted to within the reach of the light.
* switch from gamut A to gamut B for the tests.
* remove white space in blanck line
* Fix gamut hue test
* Add Gamut tests for the util.color
* fix hue gamut test
* fix hue gamut test
* Improve Philips Hue color conversion
* Initial pass of cleanup for shabbat_times
* Switch to async defs
* First pass of unit tests + fixture data
* Completion of first round of unit tests, 100% passing
* Unit tests for state restoring
* Style fixes
* More style fixes
* Lint fix
* Add upcoming candelighting and havdalah sensors
* Add unit tests, remove havdalah offset
* More unit tests + small bugfix for weekly_portion
* Add issur melacha sensor
* Remove old shabbat_times work-in-progress files
* Bump required version of hdate
* Add havdalah offset config parameter
* Bump hdate version required
* Pin hdate requirement
* Lint fixes
* Changes based on review + API changes for hdate 0.8.7
* Add three-day holiday unit tests
* Remove debugging line
* Add missing docstring
* Fix doc lint comment
* Add Mythic Beasts DNSAPI Component
* Added timeout, and tests for exceptions while updating
* Move API to external module
* Move mbddns import into function
* Updated tests to mock out mbddns library
* Allow verisure locks to be configured with a default code
* linting fix
* PR feedback
* PR feedback - try harder to prevent future typos
A python mock is a magical thing, and will respond to basicaly
any method you call on it. It's somewhat better to assert against
an explicit variable named 'mock', rather than to assert on the
method name you wanted to mock... could prevent a typo from messing up
tests.
* PR feedback: convert tests to integration-style tests
Set up a fake verisure hub, stub out a _lot_ of calls, then test
after platform discovery and service calls.
It should be noted that we're overriding the `update()` calls in
these tests. This was done to prevent even further mocking of
the verisure hub's responses.
Hopefully, this'll be a foundation for people to write more tests.
* more pr feedback
* Added Entur departure information sensor.
* Fixed houndci-bot comments.
* Removed tailing whitespace.
* Fixed some comments from tox lint.
* Improved docstring, i think.
* Fix for C1801
* Unit test for entur platform setup
* Rewritten entur component to have pypi dependecy.
* Propper client id for api usage.
* Minor cleanup of usage of constants.
* Made location output configurable.
* Cleaned up usage of constants.
* Moved logic to be contained within setup or update methods.
* Moved icon consts to root in module.
* Using config directly in test
* Minor changes
* Added Zones, and removed available() logic
flesh out Zones
tidy up init
some more tidying up
Nearly there - full functionality
passed txo - ready to send PR
Ready to PR, except to remove logging
Add Zones and associated functionality to evohome component
Add Zones to evohome (some more tidying up)
Add Zones to evohome (Nearly there - full functionality)
Add Zones to evohome (passed tox)
Add Zones to evohome (except to remove logging)
Add Zones and associated functionality to evohome component
Revert _LOGGER.warn to .debug, as it should be
Cleanup stupid REBASE
* removed a duplicate/unwanted code block
* tidy up comment
* use async_added_to_hass instead of bus.listen
* Pass evo_data instead of hass when instntiating
* switch to async version of setup_platform/add_entities
* Remove workaround for bug in client library
- using github version for now, as awaiting new PyPi package
* Avoid invalid-name lint - use 'zone_idx' instead of 'z'
* Fix line too long error
* remove commented-out line of code
* fix a logic error, improve REDACTION of potentially-sensitive infomation
* restore use of EVENT_HOMEASSISTANT_START to improve HA startup time
* added a docstring to _flatten_json
* Switch instantiation from component to platform
* Use v0.2.8 of client api (resolves logging bug)
* import rather than duplicate, and de-lint
* We use evohomeclient v0.2.8 now
* remove all the api logging
* Changed scan_interal to Throttle
* added a configurable scan_interval
* small code tidy-up, removed sub-function
* tidy up update() code
* minimize use of self.hass.data[]
* remove lint
* remove unwanted logging
* remove debug code
* correct a small coding error
* small tidyup of code
* remove flatten_json
* add @callback to _first_update()
* switch back to load_platform
* adhere to standards fro logging
* use new format string formatting
* minor change to comments
* convert scan_interval to timedelta from int
* restore rounding up of scan_interval
* code tidy up
* sync when in sync context
* fix typo
* remove raises not needed
* tidy up typos, etc.
* remove invalid-name lint
* tidy up exception handling
* de-lint/pretty-fy
* move 'status' to a JSON node, so theirs room for 'config', 'schedule' in the future
* Awair Sensor Platform
This commit adds a sensor platform for Awair devices, by accessing
their beta API. Awair heavily rate-limits this API, so we throttle
updates based on the number of devices found. We also allow for the
user to bypass API device listing entirely, because the device list
endpoint is limited to only 6 calls per day. A crashing or restarting
server would quickly hit that limit.
This sensor platform uses the python_awair library (also written
as part of this PR), which is available for async usage.
* Disable pylint warning for broad try/catch
It's true that this is generally not a great idea, but we really don't
want to crash here. If we can't set up the platform, logging it and
continuing is the right answer.
* Add space to satisfy the linter
* Awair platform PR feedback
- Bump python_awair to 0.0.2, which has support for more granular exceptions
- Ensure we have python_awair available in test
- Raise PlatformNotReady if we can't set up Awair
- Make the 'Awair score' its own sensor, rather than exposing it other ways
- Set the platform up as polling, and set a sensible default
- Pass in throttling parameters to the underlying data class, rather
than use hacky global variable access to dynamically set the interval
- Switch to dict access for required variables
- Use pytest coroutines, set up components via async_setup_component,
and test/modify/assert in generally better ways
- Commit test data as fixtures
* Awair PR feedback, volume 2
- Don't force updates in test, instead modify time itself and let
homeassistant update things "normally".
- Remove unneeded polling attribute
- Rename timestamp attribute to 'last_api_update', to better reflect
that it is the timestamp of the last time the Awair API servers
received data from this device.
- Use that attribute to flag the component as unavailable when data
is stale. My own Awair device periodically goes offline and it really
hardly indicates that at all.
- Dynamically set fixture timestamps to the test run utcnow() value,
so that we don't have to worry about ancient timestamps in tests
blowing up down the line.
- Don't assert on entities directly, for the most part. Find desired
attributes in ... the attributes dict.
* Patch an instance of utcnow I overlooked
* Switch to using a context manager for timestream modification
Honestly, it's just a lot easier to keep track of patches. Moreover,
the ones I seem to have missed are now caught, and tests seem to
consistently pass.
Also, switch test_throttle_async_update to manipulating time more
explicitly.
* Missing blank line, thank you hound
* Fix pydocstyle error
I very much need to set up a script to do this quickly w/o tox, because
running flake8 is not enough!
* PR feedback
* PR feedback
* Initial stuff
* More work in place
* Starting with tests
* Device registry in place
* Hound
* Linting
* Member comments (including extracting device registry)
* Member comments (plus I forgot cleanup!)
* Hound
* More Hound
* Removed old import
* Adding config entry test to coverage
* Updated strings
* Add srp_energy
* Update message on TypeError. Add check for None state.
* Add check for none in history
* Add srpenergy to Test requirements.
* Add srpenergy to requirments.
* Change = to ==.
* Change import for srpenergy
* Fix Flak8 errors
* Add srp to gen requirements script
* Change config name.
* Add daily usage test
* Add test for daily usage.
* Fix Flake8 message.
* Remove blank after docstring.
* Add srpenergy to coverage
* Bump requires version to srpenergy
* Fix type in coverage. Import from Sensor. Use dict.
* Update to 1.0.5. Check credentials on setup. Standalone test.
* Fix formating.
* Remove period. Rename _ variables.
* Fix rebase merge
* Add rebase requirement
* Improve Mock Patching.
In 0.7.x the API to HDate was cleaned up so as to move logic from homeassistant to
the HDate external library.
This commit removes all the superfluous code, updates the required tests and changes the
requirement from version 0.6.5 to 0.7.5
* initial tensorflow image_processing component
* linting fixes
* make displayed attribute a summary of objects
* fix missed merge conflict and add warning supression back in for CPU type
* restructure tensorflow component to install on the fly, remove from Docker
* add both matches and summary as attributes
* address review comments
* do not use deps folder as default, as it should only be managed by HA. Update to have tensorflow in root config directory
Fabian Affolter
Paulus Schoutsen
Ville Skyttä
Anders Melchiorsen
Alexei Chetroi
David F. Mulcahey
ktnrg45
Andrew Sayre
Paulus Schoutsen
Malte Franken
Otto Winter
Daniel Høyer Iversen
Aaron Bach
Tomer Figenblat
Franck Nijhof
Reinder Reinders
Jurriaan Pruis
Philip Rosenberg-Watt
tetienne
Robert Svensson
Daniel Perna
Johan Bloemberg
teliov
Penny Wood
Jc2k
Beat
Josef Schlehofer
damarco
Pascal Vizeli
Mike Megally
Jason Hu
Teemu R
Austin Drummond
Markus Jankowski
Rohan Kapoor
Andrew Hayworth
Robbie Trencheny
Per Osbäck
David Bonnes
Johann Kellerman
etheralm
Heine Furubotten
Daniel Shokouhi
Franck Nijhof
Jason Hunter
Joakim Sørensen
Tomas Hellström
starkillerOG
Markus Jankowski
David F. Mulcahey
coreGreenberet
mindigmarton
krygal
Caleb Dunn
arigilder
sander76
Mattias Welponer
cdce8p
Bob Clough
Carlos Gustavo Sarmiento
Darren Foo
Brig Lamoreaux
Tsvi Mostovicz
Matt Schmitt
Dav0815
Bram Kragten
Evan Bruhn
kennedyshead
Raymon de Looff