* Add nibe local integration
* Add sensor platform
* Enable sensor platform
* Fix manifest
* Correct domain after rename
* Adjust tests for rename
* Correct codeowners
* Add requirements for tests
* Grab coil by name
* Switch to home assistant error
* Config entry always exist
* Switch to create task
* Bump to 0.5.0
* Use new coils access
* Remove unneeded check
* Use single instance of logger
* Test invalid ip
* Don't allow coil to be None
* Remove sleep
* Initialize data in coordinator init
* Add utils to ignore
* Update homeassistant/components/nibe_heatpump/manifest.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Use generator instead
* Use tenacity as retry decorator
* Use package instead of name to get logger
* Skip broad exception handling
* Catch missing coil exception
* Add missing test
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* fixes
* restored new line in .coveragerc
* test: increased config_flow test coverage
* removed two way type
* Updated CODEOWNERS
* fix: code review comments
* fixed review comments
* added device_info
* moved device info to attribute
* Bump thermopro-ble to 0.4.2
- Turns on rounding of long values
- Uses bluetooth-data-tools under the hood
- Adds the TP393 since it works without any changes to the parser
Changelog: https://github.com/Bluetooth-Devices/thermopro-ble/compare/v0.4.0...v0.4.2
* bump again for device detection fix
* Initial version of Nobø Ecohub.
* Options update listener for Nobø Ecohub
* Unit test for nobo_hub config flow
* Cleanup
* Moved comment re backwards compatibility
* Improved tests
* Improved tests
* Options flow test
Pylint
* Fix backwards compatibility mode
* Don't require Python 3.9
* Import form configuration.yaml
* Check if device is already configured.
Correct tests for only discovering serial prefix
Fix importing when only serial suffix is configured
* Use constants
* Pylint and variable name clenaup.
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Fix tests
* Correct disabling off_command and on_commands ("Default" is a hard coded week profile in the hub).
* Improve options dialog
* Configure override type in options dialog
* Formatting
* pyupgrade
* Incorporated review comments
* Incorporated review comments.
* Incorporated second round of review comments.
* Add polling to discover preset change in HVAC_MODE_AUTO.
* Added tests/components/nobo_hub to CODEOWNERS.
* Update homeassistant/components/nobo_hub/config_flow.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Update homeassistant/components/nobo_hub/climate.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Simplify if tests.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Separate config step for manual configuration.
* Fixed indentation
* Made async_set_temperature more robust
* Thermometer supports tenths even though thermostat is in ones.
* Preserve serial suffix in config dialog on error.
* Initial version of Nobø Ecohub.
* Improved tests
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Configure override type in options dialog
* Separate config step for manual configuration.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Formatting (prettier)
* Fix HA stop listener.
* Review
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Review
- Removed workaround to support "OFF" setting.
- Simplified config flow to add a new device.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fixed review comments
* Update en.json with correction in review.
* Implemented review comments:
- Register devices
- Simplifed async_set_temperature
* Register hub as device in init module
* Implemented review comments.
Upgraded pynobo to 1.4.0.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Avoid tacking on the device name in the entity name
* Inherit entity name from device name
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Allen Porter <allen.porter@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add BThome BLE
* Update BThome to latest version
* 0.3.4
* Rename to bthome 2
* Fix uuids not being found
* Make energy a total increasing state class
* Change unit of measurement of VOC
* Use short identifier
* Fix the reauth flow
* Bump bthome_ble
* Parameterize sensor tests
* Remove Move function to parameter
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* refactor volvooncall to use ConfigFlow
* remove unused constant SIGNAL_STATE_UPDATED
* implemented feedback
* improve ConfigFlow UX by giving an option for region=None
* implemented more feedback
* next round of feedback
* implemented more feedback
* improve test coverage
* more test coverage
* Apply suggestions from code review
* implemented feedback on tests
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add Landis+Gyr Heat Meter integration
* Add contant for better sensor config
* Add test for init
* Refactor some of the PR suggestions in config_flow
* Apply small fix
* Correct total_increasing to total
* Add test for restore state
* Add MWh entity that can be added as gas on the energy dashoard
* Remove GJ as unit
* Round MWh to 5 iso 3 digits
* Update homeassistant/components/landisgyr_heat_meter/const.py
* Update CODEOWNERS
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Joakim Plate
spycle
Ernst Klamer
Aaron Bach
Robert Hillis
J. Nick Koston
Erik Montnemery
Franck Nijhof
jafar-atili
Radu
Alex Thompson
Øyvind Matheson Wergeland
Pascal Vizeli
Justin Vanderhooft
guozi7788
Paulus Schoutsen
y34hbuddy
Rami Mosleh
Vincent Knoop Pathuis
Charles Garwood
Zach Berger