* Revert "Fix #14919. Should throw exception when camera stream closed by frontend (#15028)"
This reverts commit 508d0459a7.
* Revert "Fix pylintrc section order and option placements (#15120)"
This reverts commit dbae410cf4.
* Revert "Add storage helper and migrate config entries (#15045)"
This reverts commit ae51dc08bf.
* Revert "Add language to dark sky weather component (#15130)"
This reverts commit 672a3c7178.
* Add storage helper
* Migrate config entries to use the storage helper
* Make sure tests do not do I/O
* Lint
* Add versions to stored data
* Add more instance variables
* Make migrator load config if nothing to migrate
* Address comments
* Add discovery support to mqtt climate component.
* - Fix flake8 error (./homeassistant/components/climate/mqtt.py:130:1: D202 No blank lines allowed after function docstring)
- Fix test error (since climate component was expected not to work - changed it to "lock" component, which also does not have MQTT discovery support yet)
* Fix old assert statement to reflect new lock component usage
* Change invalid MQTT discovery component type from 'lock' to 'timer', since contrary to the documentation the lock component is properly supported when using MQTT discovery.
* Make configuration of invalid MQTT config component a single point of entry to prevent missing the assertion later in the code when changing.
* Add new testcases to cover not-yet-covered code paths in https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/climate/mqtt.py
* MQTT Alarm Control Panel: add retain option for publishing for cases where receiver is asleep
* MQTT Alarm Control Panel: add retain option for publishing for cases where receiver is asleep
* MQTT Alarm Control Panel: add retain option for publishing for cases where receiver is asleep
* Fix MQTT Light with RGB and Brightness
When an MQTT light is given an RGB and Brightness topic, the RGB
is scaled by the brightness *as well* as the brightness being set
This causes 255,0,0 at 50% brightness to be sent as 127,0,0 at 50%
brightness, which ends up as 63,0,0 after the RGB bulb has applied
its brightness scaling.
Fixes the same issue in mqtt, mqtt-json and mqtt-template.
Related Issue: #13725
* Add comment to mqtt_json as well
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Update condition.py
Added code that writes to warning-log what entity causes a problem when 'value cannot be processed as a number', making troubleshooting easier.
* Make a one-line warning
* Show running apps as sources for Fire TV
* Fix unnecessary 'else' after 'return' (no-else-return)
* Remove 'pylint: disable=unused-argument'
* cleanup
* Improve volume support for Vizio Smartcast
* Vizio: avoid an error when 'self._device.get_current_volume()' returns 'None'
* Improve volume support for Vizio Smartcast
* Vizio: avoid an error when 'self._device.get_current_volume()' returns 'None'
* First line should end with a period
* Expose Wemo component availability to home assistant
* Do not add availability feature to dimmer - it works differently
* Brain fade, deleted completely the wrong thing.
Revert "Do not add availability feature to dimmer - it works differently"
This reverts commit f64e717981.
* (2nd attempt) Do not add availability feature to dimmer - it works differently
Current version only supports latitude and longitude or an address for the origin and destination fields. This update allows those fields to use entity IDs of device_tracker, zone, and sensor.
* Added support for Xiaofang Camera
* Added entry for Xiaofang 1080p camera
* Code fix
* Minor comment fix
* Updated coveragerc for Xiaomi cameras
* Added Xiaomi Camera
Added Xiaomi Camera to accommodate multiple models like Yi, Xiaofang, etc.
* Minor code fix
* Minor code fix
* Added model property
* Update xiaomi.py
* Minor code fix
* Update xiaomi.py
* Update xiaomi.py
* Minor code fix
* Package requirement fix due to Version conflict
* To fix conflicts
* Update package_constraints.txt
* Minor fix
* Update xiaomi.py
* Update xiaomi.py
Changes made per comment
* Update xiaomi.py
* Don't update on add.
* Add Calendar API endpoint to get events
* Set default event color
* Fix PR comments
* Fix PR comments
* Fix PR comments
* Remote local.py file
* Use iso 8601
* Fix lint
* Fix PR comments
* Fix PR comments
* Add Support for todoist and demo calendar
* Todoist events are allday events
* Add calendar demo api endpoint test
* Register only one api endpoint for calendar
* Rename demo calendar
By default simulated sensors are relative to when they're activated,
instead we make this togglable with this new option 'relative_to_epoch',
and instead they become relative to 1970-01-01 00:00:00.
* first blood for ZhongHong HVAC Controller
* add requirements
* requirements_all.txt updated
* add zhong_hong.py to coveragerc
* add comments
* unique_id add platform name
* zhong_hong_hvac version bump to 1.0.1
* improve some coding style to match the project standard
* zhong_hong_hvac version bump to 1.0.4
* zhong_hong_hvac version require 1.0.7
* update requirements by script/gen_requirements_all.py
* zhong_hong_hvac version bump to 1.0.8
* fix startup problem
* remove unused import
* zhong_hong_hvac version bump to 1.0.9
- operation_mode: cold -> cool
* start hub listen event when all climate entities is ready
* use dispatcher to setup hub
* var name change
SIGNAL_DEVICE_SETTED_UP -> SIGNAL_DEVICE_ADDED
* async problem fix
* bugfix: set_operation_mode forget to use upper case
* stringify the exception instead of print full stack of traceback
* avoid to call str(exception) explicity
* remove unnecessary try...except clause
* remove unused import
* wink: Update to python-wink 1.8.0
This pulls in a patch to expose the GE Z-Wave in wall fan switch
as a fan component instead of a light dimmer switch component.
* Update requirements_all.txt
* Epson projector support. Version based on external library
* Epson projector support. Version based on external library
* modified epson according to MartinHjelmare review.
Added description of cmode to services.yaml
* renamed EPSON_SCHEMA to epson_schema
* removed method of getting cmode property
* removed unnecessary checks
change name of cmode service
* renamed SERVICE_ATTR_CMODE to SERVICE_SELECT_CMODE
Current uuid is ok when using only 1 snapserver
New uuid is needed when using multiple snapserver
Because the client can connect to more snapservers and
then uuid based on client MAC is not enough
* initial commit for kiwi door locks
bugfixes
improved attribute display
flake8
more style adjustments
* added session handling
flake8
* added requirements_all
reordered imports and flake8
attempt to pelase a very picky linter
also pleasing pylint now :)
* re-try the build
* added kiwi.py to .coveragerc
* reorganized datetime handling and attribute naming
* created pypi package for door lock library
* updated requirements_all.txt
* code review changes
* added async lock state reset for locking state
* refactored lat/lon attribute updates
* initial locked state changed from undefined to locked
* refactored is_locked property check
* handling authentication exception in setup_platform
* added more check in setup_platform
* code review changes: return type in setup_platform
* fixed logging issue
* event handling in main thread
* updated kiwiki-client to version 0.1.1
* renamed alias e to exc
* start arlo refactoring
* Refactored Arlo Hub to avoid uncessary and duplicated GETs to Arlo API
* Refactored Arlo camera component to avoid duplicate queries
* Added debug and error messages when video is not found
* Transformed Arlo Control Panel to Sync
* Makes linter happy
* Uses total_seconds() for scan_interval
* Added callback and fixed scan_interval issue
* Disable multiple tries and supported custom modes set in Arlo
* Bump PyArlo version to 0.1.4
* Makes lint happy
* Removed ArloHub object and added some tweaks
* Fixed hub_refresh method
* Makes lint happy
* Ajusted async syntax and added callbacks decorators
* Bump PyArlo version to 0.1.6 to include some enhacements
* Refined code
* Update mqtt_eventstream.py
Remove a line setting an internal state mqtt_eventstream.initialized to True since:
1. No other platform is doing this
2. This will create an annoying entity/item in the user interface which the user will have to explicitly hide
* Update mqtt_eventstream.py
* added new platform for the Unitymedia Horizon HD Recorder
* improve connection handling of the horizon platform
* remove unneeded parameters and fix spelling in the horizon platform
* abort or raise exception if connection to the device could not be established
* remove channel/source list and SELECT_SOURCE feature
* remove useless type check after cast and use a try block instead
* abort or raise exception if reconnect to device fails
* remove protocol specific code and restructure sending logic accordingly
* fix indentation to be pep8 complaint
* remove unused methods/properties
* fix unnecessary pylint commands and use a return to abert outside of setup_platform
* directly access config values
* Added Uptime Robot sensor
* added newline at the end and corrected doclink
* Added changes form @cdce8p
* Convert to binary_sensor
* updated requirements
* moved to correct dir
* Update uptimerobot.py
Unique id for client is generated from prefix 'snapcast_client_'
and MAC address
Unique id for group is generated from prefix 'snapcast_group_'
and UUID provided by snapcast library
When Samsung TV is idle for a period of time after issued a command,
subsequent 'turn_off' command won't turn off the TV. The issue is seen
in Samsung models with websocket as discussed in #12302.
== Reproducible Steps
1. Turn on TV (either via HA or directly).
2. Issue some commands e.g. volume ups / downs.
3. Wait for ~1 minute.
4. Issue turn_off command via HA. TV won't turn off.
5. Issue subsequent turn off commands won't turn off TV still.
6. However, issue some other commands e.g. volume ups / downs multiple
times in a row and then turn_off will turn off the TV.
== Root Cause
The underlying websocket connection opened by samsungctl get closed
after some idle time. There was no retry mechanism so issued commands
would intermittently fail but the subsequent one would succeed when
`_remote` get recreated. With `turn_off()`, however, there is an
additional call to `self.get_remote().close()` which indirectly caused
new connection to be created and then closed immediately. This causes the
component to stuck in failure mode when turn_off command is repeatly
issued.
== The Fix
Recreate the connection and retry the command if connection is closed
to avoid silent failures due to connection closed. Also set `_remote`
to None after calling close() to put it in correct state.
This fix eliminates intermittent command failure and failure mode in
turn_off().
* fixed tests: using correct camera configuration now and error handling tests must be separated out to ensure that the setup_component call is actually executed
* better error handling during setup; raising PlatformNotReady in likely recoverable cases; added tests
* reviewing this code min_temp and max_temp are always present and always in celsius
* revert change (preserve unit conversion)
* revert (due to unit conversion)
* self
* clean
* cleaner
* Hass configuration name is optional
* Check explicitly if name is none
* Reverted back to old logic for zones configured in configuration.yaml, where many zones can have the same name
* New test to verify use case of allowing multiple zones having the same name
* Fix too long line
* Add set_default_service to logger
* Fix 2-line lint error
* Add set_default_level to services.yaml
* Add tests for set_default_level
* Remove function and add else when setting default
Right now, "Hub Status" is very generic, I didn't know what component it was coming from, and the only way to tell was searching the source code to find the reference.
* Initial version of wirelesstags platform support.
* Pinned wirelesstagpy, generated requirements_all.
* Fixed temperature units in imperial units systems, make binary events more tags specific.
* Lowercased tag name during entity_id generation.
* Fixed: tag_id template for tag_binary_events, support of light sensor for homebridge.
* Minor style cleanup.
* Removed state, define_name, icon. Reworked async arm/disarm update. Removed static attrs. Introduced available property. Custom events contains components name now. Cleaned dedundant items from schema definition.
* Removed comment and beep duration from attributes. Minor cleanup of documentation comment.
* Ignoring Wemo switches linked in iOS app.
* Reworked passing data from platform to components using signals.
This commit adds a new history component for the IBM Watson IoT
Platform. The IBM Watson IoT Platform allows for tracking of devices
and analytics on top of the device data. This new component allows
users to have home assistant automatically populate a watson iot
platform board with device data from devices managed by home assistant.
* Media player: general sound mode support
* General sound mode support
* White spaces
* Add sound mode support to demo media player
* white space
* remove unnessesary code
* Add a device tracker for Freebox routers
* Automatic setup of Freebox device tracker based on discovery
* Make the Freebox device tracker asynchronous
* initial commit
* lint
* update with pyipma
* Added test
* Added test
* lint
* missing dep
* address comments
* lint
* make sure list is iterable
* don't bother with list
* mock dependency
* no need to add test requirements
* last correction
* Assign device class to nest sensors
sensor/nest.NestSensor => /nest.NestSensorDevice,
so that BinarySensor platform do not reference Sensor platform anymore
* Resolve code review comment
* Follow code review comment
* Version Requirement bump
Bump required version to 0.5 to allow component to work with Genie Mini clients using the clientAddr variable.
* Ran script/gen_requirements_all.py as requested.
Ville Skyttä
Jason Hu
Pascal Vizeli
Paulus Schoutsen
Adam Mills
dreizehnelf
b3nj1
Martin Hjelmare
Tom Harris
Aaron Bach
Robert Svensson
Marcelo Moreira de Mello
Andrey
Paulus Schoutsen
Bob Clough
hanzoh
Daniel Shokouhi
Daniel Perna
Thibault Cohen
William Scanlon
Dejan Dakić
gstorer
Raoul Teeuwen
Fabian Affolter
Jeff Irion
Kees Schollaart
Matt Schmitt
Petro31
Sebastian Muszynski
Teemu R
cdce8p
Johan Bloemberg
c727
John Mihalic
Albert Lee
Sriram Vaidyanathan
Benedict Aas
ruohan.chen
Nick Whyte
Robin
Marius
Vignesh Venkat
ArrayLabs
Pawel
Hate-Usernames
Ing. Jaroslav Šafka
Christoph Gerneth
Erik Eriksson
Matt Snyder
Ben Lebherz
Nate Clark
Dan Klaffenbach
Yevgeniy
Fabian Affolter
Joakim Sørensen
John Arild Berentsen
Ong Vairoj
vandenberghev
Malte Franken
Anders Melchiorsen
Mal Curtis
Diogo Gomes
Dale Higgs
Steve Edson
Alexei Chetroi
Sergiy Maysak
Philip Rosenberg-Watt
Matthew Treinish
starkillerOG
nielstron
Roman
Luc Touraille
Thomas Krüger
Simon Nørager Sørensen
Mischa Gruber
Hugo Dupras
quthla
Mattias Welponer
Jason Woodford
Mick Vleeshouwer
Tristan Caulfield
austinlg96