* Fire events for ISY994 control events
This allows hass to react directly to Insteon button presses (on switches and remotes), including presses, double-presses, and long holds
* Move change event subscription to after entity is added to hass
The event handler method requires `self.hass` to exist, which doesn't have a value until the async_added_to_hass method is called. Should eliminate a race condition.
* Overhaul binary sensors in ISY994 to be functional "out of the box"
We now smash all of the subnodes from the ISY994 in to one Hass binary_sensor, and automatically support both paradigms of state reporting that Insteon sensors can do. Sometimes a single node's state represents the sensor's state, other times two nodes are used and only "ON" events are sent from each. The logic between the two forunately do not conflict so we can support both without knowing which mode the device is in.
This also allows us to handle the heartbeat functionality that certain sensors have - we simply store the timestamp of the heartbeat as an attribute on the sensor device. It defaults to Unknown on bootup if and only if the device supports heartbeats, due to the presence of subnode 4.
* Parse the binary sensor device class from the ISY's device "type"
Now we automatically know which sensors are moisture, motion, and openings! (We also reverse the moisture sensor state, because Insteon reports ON for dry on the primary node.)
* Code review tweaks
The one material change here is that the event subscribers were moved to the `async_added_to_hass` method, as the handlers depend on things that only exist after the entity has been added.
* Handle cases where a sensor's state is unknown
When the ISY first boots up, if a battery-powered sensor has not reported in yet (due to heartbeat or a change in state), the state is unknown until it does.
* Clean up from code review
Fix coroutine await, remove unnecessary exception check, and return None when state is unknown
* Unknown value from PyISY is now -inf rather than -1
* Move heartbeat handling to a separate sensor
Now all heartbeat-compatible sensors will have a separate `binary_sensor` device that represents the battery state (on = dead)
* Add support for Unknown state, which is being added in next PyISY
PyISY will report unknown states as the number "-inf". This is implemented in the base ISY994 component, but subcomponents that override the `state` method needed some extra logic to handle it as well.
* Change a couple try blocks to explicit None checks
* Bump PyISY to 1.1.0, now that it has been published!
* Remove -inf checking from base component
The implementation of the -inf checking was improved in another branch which has been merged in to this branch already.
* Restrict negative-node and heartbeat support to known compatible types
Not all Insteon sensors use the same subnode IDs for the same things, so we need to use different logic depending on device type. Negative node and heartbeat support is now only used for leak sensors and open/close sensors.
* Use new style string formatting
* Add binary sensor detection for pre-5.x firmware
Meant to do this originally; writing documentation revealed that this requirement was missed!
* Allow using more than one keyboard remote
This sets up one thread per keyboard remote, listening for events.
* Remove enclosing block in keyboard_remote
* Remove unnecessary semantic check for keyboard_remote
* Add media progress information
* Remove unnecessary comments
* Remove datetime import
* Remove pysonyavr dependency
* Fix doc syntax (D205)
* Lint fix: no-else-return
* Don't attempt to set media progress info if program is None
* Fix Python 3.4 compatibility
* Explicitely depend on pyteleloisirs
* Only update remaining play time when it changed
* Fix floot state table
* Introduce a new Hue component that knows how to talk to a Hue bridge, but doesn't actually set up lights.
* Refactor the hue lights platform to use the HueBridge class from the hue component.
* Reimplement support for multiple bridges
* Auto discover bridges.
* Provide some migration support by showing a persistent notification.
* Address most feedback from code review.
* Call load_platform from inside HueBridge.setup passing the bridge id.
Not only this looks nicer, but it also nicely solves additional bridges being added after initial setup (e.g. pairing a second bridge should work now, I believe it required a restart before).
* Add a unit test for hue_activate_scene
* Address feedback from code review.
* After feedback from @andrey-git I was able to find a way to not import phue in tests, yay!
* Inject a mock phue in a couple of places
* Add support for Logitech UE Smart Radios.
* Removed full stops to please Hound's line limit.
* Updated with requested changes.
* Fix Pylint Flake8 problem.
* Updated with requested changes.
All mochad devices are sharing a single socket interface. When multiple
threads are issuing requests to the mochad daemon at the same time the
write read cycle might get crossed between the threads. This is normally
not an issue for 1-way X10 devices because as long as the request issued
successfully and data is read over the socket then we know as much as
mochad will tell us (since there is no ACK from the request for most
X10 devices). However, where it does matter is on the device __init__()
because we're relying on the mochad daemon's internal state to take an
educated guess at the device's state to intialize things with. When
there are multiple devices being initialized at the same time the wires
can get crossed between and the wrong device state may be read.
To address this potential issue this commit adds locking using a
semaphore around all pairs of send_cmd() and read_data() (which is what
pymochad.device.Device.get_status() does internally) calls to the mochad
controller to ensure we're only ever dealing with a single request at a
time.
Fixesmtreinish/pymochad#4
* Updated snips to listen on new mqtt topic and use rawValue if value not present in slot
* Too late at night
* Trying to make minor changes via web
* Update test_snips.py
* Update __init__.py
* Updated wrong branch cause I'm a monkey
* Add Canary component
* Made some change to how canary data is updated and stored
* Updated to use py-canary:0.1.2
* Addressed flake8 warnings
* Import canary API locally
* Import canary API locally again
* Addressed pylint errors
* Updated requirements_all.txt
* Fixed incorrect unit of measurement for air quality sensor
* Added tests for Canary component and sensors
* Updated canary component to handle exception better when initializing
* Fixed tests
* Fixed tests again
* Addressed review comments
* Fixed houndci error
* Addressed comment about camera force update
* Addressed comment regarding timeout when fetching camera image
* Updated to use py-canary==0.2.2
* Increased update frequency to 30 seconds
* Added support for Canary alarm control panel
* Address review comments
* Fixed houndci error
* Fixed lint errors
* Updated test to only test setup component / platform
* Fixed flake error
* Fixed failing test
* Uptake py-canary:0.2.3
* canary.alarm_control_panel DISARM is now mapped to canary PRIVACY mode
* Fixed failing tests
* Removed unnecessary methods
* Removed polling in canary camera component and update camera info when getting camera image
* Added more tests to cover Canary sensors
* Address review comments
* Addressed review comment in tests
* Fixed pylint errors
* Excluded canary alarm_control_panel and camera from coverage calculation
* initial commit of shuffle option for sonos
* added test
* Small adjustments to adhere to review requests
* Removed unnessesary setting of variable. Use shuffle state from soco instead
In a case where either (a) an incorrect source name is used, or (b) the
TV isn't currently queryable (e.g. it's off), we get tracebacks because
we assume the source that we are being asked to select exists in
self._source_list.
This makes the lookup code a little more rugged, and adds in a warning
message (in place of the current exception).
* Device tracker for meraki AP
* styles fix
* fix again
* again
* and again :)
* fix hide if away
* docs and optimization
* tests and fixes
* styles
* styles
* styles
* styles
* styles fix. Hope last
* clear track new
* changes
* fix accuracy error and requested changes
* remove meraki from .coveragerc
* tests and minor changes
* remove location
Mike Megally
Pascal Vizeli
Paulus Schoutsen
Adam Mills
Daniel Perna
Greg Laabs
BryanJacobs
Michael Pollett
Andrea Campi
Nolan Gilley
Philipp Schmitt
Ryan McLean
Dan Nixon
Pierre Ståhl
Fabian Affolter
Jan Almeroth
Erik Eriksson
uchagani
Adde Lovein
maxlaverse
perfalk
GreenTurtwig
Andrey Kupreychik
Andrey
Matthew Treinish
tschmidty69
Anders Melchiorsen
Joe Lu
Marcus Schmidt
Lewis Juggins
Jeroen ter Heerdt
Alan Fischer
Daniel Watkins
Mitko Masarliev