* remove velbus fan and light platforms
these platforms should not be there since they can be created with template components based on switch platform
* use latest version of python-velbus which supports auto-discovery of modules
* fix linting errors
* fix linting errors
* fix linting errors
* address review comments from @MartinHjelmare
* update based on automatic feedback
* fix linting errors
* update dependency
* syntax corrections
* fix lint warning
* split out common functionality in VelbusEntity
use sync methods for loading platforms
support unique_ids so that entities are registred in entity registry
* fix linting errors
* fix linting errors
* fix linting errors
* integrate review comments (common functionality in VelbusEntity class)
* rename DOMAIN import to VELBUS_DOMAIN
* revert change created by requirements script
* regen
* Initial commit for deCONZ switch support
* Fix hound comment
* Fix martins comment; platforms shouldn't depend on another platform
* Fix existing tests
* New tests
* Clean up unnecessary methods
* Bump requirement to v43
* Added device state attributes to light
* Add context
* Add context to switch/light services
* Test set_state API
* Lint
* Fix tests
* Do not include context yet in comparison
* Do not pass in loop
* Fix Z-Wave tests
* Add websocket test without user
* Add spider power plug component
* rounding down the numbers
* ability to throttle the API
* updated to the lastest api
* resolved an issue within the API
Switches by default use the payload_on and payload_off configuration parameters to specify both the payload the switch should send for a state but also what will be returned for the current state - which isnt always the same
As a toggle switch might always send an ON or TOGGLE to toggle the switch, but still receive an ON or an OFF for the state topic - This change allows for splitting them apart
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* support for tuya platform
* support tuya platform
* lint fix
* change dependency
* add tuya platform support
* remove tuya platform except switch. fix code as required
* fix the code as review required
* fix as required
* fix a mistake
* Add HomematicIP Cloud to config flow
* Inititial trial for config_flow
* Integrations text files
* Load and write config_flow and init homematicip_cloud
* Split into dedicated files
* Ceanup of text messages
* Working config_flow
* Move imports inside a function
* Enable laoding even no accesspoints are defined
* Revert unnecassary changes in CONFIG_SCHEMA
* Better error handling
* fix flask8
* Migration to async for token generation
* A few fixes
* Simplify config_flow
* Bump version to 9.6 with renamed package
* Requirements file
* First fixes after review
* Implement async_step_import
* Cleanup for Config Flow
* First tests for homematicip_cloud setup
* Remove config_flow tests
* Really remove all things
* Fix comment
* Update picture
* Add support for async_setup_entry to switch and climate platform
* Update path of the config_flow picture
* Refactoring for better tesability
* Further tests implemented
* Move 3th party lib inside function
* Fix lint
* Update requirments_test_all.txt file
* UPdate of requirments_test_all.txt did not work
* Furder cleanup in websocket connection
* Remove a test for the hap
* Revert "Remove a test for the hap"
This reverts commit 968d58cba1.
* First tests implemented for config_flow
* Fix lint
* Rework of client registration process
* Implemented tests for config_flow 100% coverage
* Cleanup
* Cleanup comments and code
* Try to fix import problem
* Add homematicip to the test env requirements
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Initial version of wirelesstags platform support.
* Pinned wirelesstagpy, generated requirements_all.
* Fixed temperature units in imperial units systems, make binary events more tags specific.
* Lowercased tag name during entity_id generation.
* Fixed: tag_id template for tag_binary_events, support of light sensor for homebridge.
* Minor style cleanup.
* Removed state, define_name, icon. Reworked async arm/disarm update. Removed static attrs. Introduced available property. Custom events contains components name now. Cleaned dedundant items from schema definition.
* Removed comment and beep duration from attributes. Minor cleanup of documentation comment.
* Ignoring Wemo switches linked in iOS app.
* Reworked passing data from platform to components using signals.
* Starting to add attributes
* All attributes added to programs
* Basic zone attributes in place
* Added advanced properties for zones
* We shouldn't calculate the MAC with every entity
* Small fixes
* Basic framework for push in play
* I THINK IT'S WORKING
* Some state cleanup
* Restart
* Restart part 2
* Added stub for service schema
* Update
* Added services
* Small service description update
* Lint
* Updated CODEOWNERS
* Moving to async methods
* Fixed coverage test
* Lint
* Removed unnecessary hass reference
* Lint
* Lint
* Round 1 of Owner-requested changes
* Round 2 of Owner-requested changes
* Round 3 of Owner-requested changes
* Round 4 (final for now) of Owner-requested changes
* Hound
* Updated package requirements
* Lint
* Collaborator-requested changes
* Collaborator-requested changes
* More small tweaks
* One more small tweak
* Bumping Travis and Coveralls
* Added the Hydrawise component.
* Fixed lint errors.
* Multiple changes due to review comments addressed.
* Simplified boolean test. Passes pylint.
* Need hydrawiser package version 0.1.1.
* Added a docstring to the device_class method.
* Addressed all review comments from MartinHjelmare.
* Changed keys to single quote. Removed unnecessary duplicate method.
* Removed unused imports.
* Changed state to lowercase snakecase.
* Changes & fixes from review comments.
* Simplify conditionals.
* Send white_value on service call.
* Remove extra blank line
* Further simplification of conditionals
* Requested changes
* Do not call getRgb if not needed
* Update log message
* make device_discovered synchronous
* small fixes from code review
* use dispatcher to update sensor state
* update switch state based on response from the device
* interpolate entity_id into dispatcher signal
* cleanup lint
* change coroutine to callback
* Added option to invert aREST pin switch logic for active low relays
* Fixed line lengths
* Changed naming and set optional invert default value.
* Fixed line length
* Removed default from get
* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Starting to add attributes
* All attributes added to programs
* Basic zone attributes in place
* Added advanced properties for zones
* Working to move common logic into component + dispatcher
* We shouldn't calculate the MAC with every entity
* Small fixes
* Small adjustments
* Owner-requested changes
* Restart
* Restart part 2
* Added ID attribute to each switch
* Collaborator-requested changes
* Add support for shutter contact and motion detector device
* Add support for power switch devices
* Add support for light switch device
* Cleanup binary_switch and light platform
* Update comment
* Setup all-linking service
* Remove extra line
* Remove linefeed and tab escape chars
* Add services delete_all_link, load_all_link_database and print_all_link_database
* Check if reload is set
* Confirm entity is InsteonPLMEntity before attempting to load or print ALDB
* Debug load and print ALDB
* Debug print aldb
* Debug print_aldb
* Get entity via platform
* Track Insteon entities in component
* Store entity list in hass.data
* Add entity to hass.data
* Add ref to hass in InsteonPLMEntity
* Pass hass correctly to InsteonPLMBinarySensor
* Fix reference to ALDBStatus.PARTIAL
* Print ALDB record as string
* Get ALDB record from memory address
* Reformat ALDB log output
* Add print_im_aldb service
* Remove reference to self in print_aldb_to_log
* Remove reference to self in print_aldb_to_log
* Fix spelling issue with load_all_link_database service
* Bump insteonplm to 0.9.1
* Changes from code review
* Code review changes
* Fix syntax error
* Correct reference to cv.boolean and update requirements
* Update requirements
* Fix flake8 errors
* Reload as boolean test
* Remove hass from entity init
* Converts RainMachine to hub model (part 2)
* Small style adjustments for consistency
* Moving MAC calculation to one-time call in component
* Removing unneeded attribute
* Bumping Travis
* Lint
According to my observations, the "switch_energy" value displayed by Pyfritzhome is the sum of Wh over the last week since measurement.
As a result, the correct divisor for representing output as kWh would be 1000 instead of 10000.
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
* Added the ability to switch Tahoma Garage door relay.
Those are special switches that can only be pushed.
Their state is always OFF, they react to the turn_on action, perform it, but stay OFF
* fixing indents and so on
* CI fix
* Added switch component to Amcrest IP Camera.
* Fixes to new switch component after review
* Removed redundant branching, as well as requirement declaration.
* Changes to requirements after rerunning generation script
* Minor changes
* Accept and report both xy and RGB color for lights
* Fix demo light supported_features
* Add new XY color util functions
* Always make color changes available as xy and RGB
* Always expose color as RGB and XY
* Consolidate color supported_features
* Test fixes
* Additional test fix
* Use hue/sat as the hass core color interface
* Tests updates
* Assume MQTT RGB devices need full RGB brightness
* Convert new platforms
* More migration
* Use float for HS API
* Fix backwards conversion for KNX lights
* Adjust limitless min saturation for new scale
* Added vesync platform
Support for power toggling, current power, and daily energy kWh
* Adds vesync to requirements file.
* Reorder vesync item in requirements_all.txt from gen_requirements_all
* Removes unnecessary global values that are not used in this component
* Removes try/catch from setup_platform -no throws. Guard check login()
* Remove unnecessary boolean convert
* Fix indentation of log messages
* Get zha switch and binary_sensor state on startup
* Removed unused var
* Make zha switch report status
* Use right method name
* Formatting fix
* Updates to match latest dev
* PR feedback updates
* Use async for cluster commands
* Unavailable state introduced if the device isn't reachable.
* Redundancy removed.
* Pylint fixed.
* Missing space added.
* Pylint fixed.
* Use format instead of concatenation.
* Next generation of Xiaomi Aqara devices added: ctrl_neutral1.aq1, ctrl_neutral2.aq1, ctrl_ln1.aq1, ctrl_ln2.aq1, ctrl_86plug.aq1
* The Aqara wireless button (3rd gen, sensor_switch.aq3) supports a click_type called "shake".
* Warning added to spot new features.
* Merge from current dev
* Update for Sensor approach
* Update reference to state classes
* Reference stateKey correctly
* Reference stateKey
* Change deviceInfo to a dict
* Pass state to properties method
* Add state info to device_state_attributes
* Update entity name to include state name
* Update for on() off() vs light_on/off
* Flag newnames option
* Update configuration schema
* Update configuration schema
* Spell False correctly
* Rename state to statekey
* Rename statekey to stateKey
* Call new device with stateKey and newname
* Simplify use of newnames
* Add workdir to save devices
* Fix newnames config setup
* Propogate OnOffSensor to VariableSensor change
* Upgrade insteonplm version to 0.8.0
* Pass address rather than device object to platform
* Set inteon_plm data variable to PLM
* Consistant use of conn and plm
* Consistant use of conn and plm
* Proper reference to device and address
* Fixed platform setup issues
* Correct issue with missing _supported_features attr
* Properly reference self._state vs self.state
* Bump insteonplm version to 0.8.1
* Remove subplatform and map based on state name
* Correct refrence to State
* Correct reference to device.states
* Bump insteonplm to 0.8.2
* Fix format errors
* Fix format issues
* Fix trailing whitespace
* Correct format issues
* Fix format issues
* Fix format issues
* Fixed format issues
* Fixed format issues
* Move imports inside classes
* Simplify import of modules
* Correct reference to OnOffSwitch_OutletTop and bottom
* Remove unnessary references
* Fix format issues
* Code review adjustments
* Fix format issue
* Use new nameing format for groups that are not group 0x01
* Remove newname feature
* Fix binary_sensor type to default to None
* Fix device_class property to return the sensor type correctly.
* rename _device and _state to avoid conflicts with Entity
* Format long lines
* Pylint clean up
* Insteon_PLM
* lint cleanup
* Check device_override has address
* 3.4 lint clean up
* Changes per code review
* Change discovered from a list of dict to a dict
* Correct common_attributes usage
* Change discovered from a list of dict to a dict
* Add debugging message to confirm platform setup
* Debug messages
* Debug messages
* Debug async_added_to_hass
* Debug async_added_to_hass async_add_job
* Debug async_added_to_hass
* Debug devices not loading in hass
* Debug new entities not being added to hass
* Debug adding devices to hass
* Revert "3.4 lint clean up"
This reverts commit 0d8fb992b1.
* 3.4 lint clean up
* Revert "Debug adding devices to hass"
This reverts commit ec306773d4.
* Revert "Debug new entities not being added to hass"
This reverts commit 55fb724d06.
* Revert "Debug devices not loading in hass"
This reverts commit 07814b4f14.
* Revert "Debug async_added_to_hass"
This reverts commit 4963a255d8.
* Revert "Debug async_added_to_hass async_add_job"
This reverts commit 22cadff91f.
* Revert "Debug async_added_to_hass"
This reverts commit 12c5651fe4.
* Pylint clean up
* pylint cleanup
* Clean up naming
* Enhance config schema. Fix logging issue
* Reapply changes after squash
* added smappee component
* Fixed pylint errors and a few use cases when starting up with invalid credentials
Added coverage omit
* Added support to run only locally
Added a few more sensors
Added more error handling
Better parsing and debug message
* fixed smappee switch after local/remote support was added
* Smappee - update switches for local support (#3)
* Merged with local version
* Updated smappy library with the patched one
Fixed lint, added merge missing param
Fixed missing run for requirements_all.txt
Fixed lint
* Fixed on/off based on library. Reverted change used for testing stacktrace
* Fixed switches to work with both remote and local active
Fixed lint
Fixed switches
Fixed lint
* nothing to update per switch as the states are not saved by smappee system
* added better error handling for communication errors with smappee
* fixed lint errors
* fixed comment
* fixed lint error
* fixed lint error
* update smappee module with reviewer comments
- update smappy module
- cache cloud api requests
- added actuator info
- updated return states
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* Add error handling to TP-LInk LED state set
Handles errors when setting the LED state of TP-Link sockets.
If the socket is unavailable then the raised exception will cause the
compoent to not be added to HA.
* Move LED state setting out of __init__
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* fixed error with wrong arguments number during callback call
* reset unavailability state on new message received from device
* use locks to fix race condition during managing _state property
* overriden state() method for some components to check for STATE_UNAVAILABLE and return it instead e.g. STATE_OFF
* fixed linter
* removed blank line
* use available() method instead of changing _state
* filter motion sensors 'heartbeat', was removed from PyXiaomiGateway
* remove self._hass, use self.hass set by HA on attach
* self.push_data now running in the event loop, use async_schedule_update_ha_state()
* merge fix
* removed accidentally added home-assistant-polymer
* bump PyXiaomiGateway version to 0.8.0
* bump PyXiaomiGateway to 0.8.0
* updated methods names and annotations
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Updated requirements_all.txt with gen_requirements_app.py
* Pylint fix: No space allowed around keyword argument assignment
* PR review changes
* Moved auto setup from platforms to ihc component
* Do no auto setup if there are no IHC products found
* Changes from PR review
* Make the rpi_rf component thread-safe
The previous implementation suffered from race conditions when two rpi_rf switches are triggered at the same time. This implementation uses an RLock to give one thread at a time exclusive access to the rfdevice object.
* cleanup
* fix lint
* Deprecate explicit entity_id in template platforms
* Use config validator for deprecation
* Fix copy/paste typos
* Also print the config value
* Add test for config validator
* Assert the module name that logged the message
* trying to rework device discovery. now the main component will do the getlinked and pass it to the sub-components. no longer any config needed other than what is needed to connect to the hub. device names are no longer stored. core team told us to stop using configurator to ask for names. there should be a way to set names in hass...possibly this https://home-assistant.io/docs/configuration/customizing-devices/
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Fixing Rebase Conflicts
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Update Insteon_Local for performance improvements
* Fix errors from get_linked
* Fix typo
* Requested changes
* Fix spacing
* Clean up
* Requested Changes
* Connection to mochad occasionally stalls on RPi and CM19A. Reconnect one switch send command.
* Formatting and exception hanling fixes
* Moved import inside the method. Logging outside the try-catch.
* Tailing whitespaces.
* MockDependency on pymochad in unit tests to resolve exceptions
* patch pymochad MochadException in unit tests to resolve exceptions
* patch pymochad MochadException in unit tests to resolve exceptions
* cleaned unused import
* lint issue fixed
* pylint issue fixed
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
* Correct units used in TP-Link energy monioring
- Energy is measured in kWh for swtches
- Power is reported in mW for bulbs
- Energy is reported in Wh for bulbs
* TP-Ling energy: store units in attribute names
Stores the unit in the attrbute names for TP-Link devices that support
energy monitoring.
* Huge ISY994 platform cleanup, fixes support for 5.0.10 firmware
# * No more globals - store on hass.data
# * Parent ISY994 component handles categorizing nodes in to Hass components, rather than each individual domain filtering all nodes themselves
# * Remove hidden string, replace with ignore string. Hidden should be done via the customize block; ignore fully prevents the node from getting a Hass entity
# * Removed a few unused methods in the ISYDevice class
# * Cleaned up the hostname parsing
# * Removed broken logic in the fan Program component. It was setting properties that have no setters
# * Added the missing SUPPORTED_FEATURES to the fan component to indicate that it can set speed
# * Added better error handling and a log warning when an ISY994 program entity fails to initialize
# * Cleaned up a few instances of unecessarily complicated logic paths, and other cases of unnecessary logic that is already handled by base classes
* Use `super()` instead of explicit base class calls
* Move `hass` argument to first position
* Use str.format instead of string addition
* Move program structure building and validation to component
Removes the need for a bunch of duplicate exception handling in each individual platform
* Fix climate nodes, fix climate names, add config to disable climate
Sensor platform was crashing when the ISY reported climate nodes. Logic has been fixed. Also added a config option to prevent climate sensors from getting imported from the ISY. Also replace the underscore from climate node names with spaces so they default to friendly names.
* Space missing in error message
* Fix string comparison to use `==`
* Explicitly check for attributes rather than catch AttributeError
Also removes two stray debug lines
* Remove null checks on hass.data, as they are always null at this point
* Fire events for ISY994 control events
This allows hass to react directly to Insteon button presses (on switches and remotes), including presses, double-presses, and long holds
* Move change event subscription to after entity is added to hass
The event handler method requires `self.hass` to exist, which doesn't have a value until the async_added_to_hass method is called. Should eliminate a race condition.
* Overhaul binary sensors in ISY994 to be functional "out of the box"
We now smash all of the subnodes from the ISY994 in to one Hass binary_sensor, and automatically support both paradigms of state reporting that Insteon sensors can do. Sometimes a single node's state represents the sensor's state, other times two nodes are used and only "ON" events are sent from each. The logic between the two forunately do not conflict so we can support both without knowing which mode the device is in.
This also allows us to handle the heartbeat functionality that certain sensors have - we simply store the timestamp of the heartbeat as an attribute on the sensor device. It defaults to Unknown on bootup if and only if the device supports heartbeats, due to the presence of subnode 4.
* Parse the binary sensor device class from the ISY's device "type"
Now we automatically know which sensors are moisture, motion, and openings! (We also reverse the moisture sensor state, because Insteon reports ON for dry on the primary node.)
* Code review tweaks
The one material change here is that the event subscribers were moved to the `async_added_to_hass` method, as the handlers depend on things that only exist after the entity has been added.
* Handle cases where a sensor's state is unknown
When the ISY first boots up, if a battery-powered sensor has not reported in yet (due to heartbeat or a change in state), the state is unknown until it does.
* Clean up from code review
Fix coroutine await, remove unnecessary exception check, and return None when state is unknown
* Unknown value from PyISY is now -inf rather than -1
* Move heartbeat handling to a separate sensor
Now all heartbeat-compatible sensors will have a separate `binary_sensor` device that represents the battery state (on = dead)
* Add support for Unknown state, which is being added in next PyISY
PyISY will report unknown states as the number "-inf". This is implemented in the base ISY994 component, but subcomponents that override the `state` method needed some extra logic to handle it as well.
* Change a couple try blocks to explicit None checks
* Bump PyISY to 1.1.0, now that it has been published!
* Remove -inf checking from base component
The implementation of the -inf checking was improved in another branch which has been merged in to this branch already.
* Restrict negative-node and heartbeat support to known compatible types
Not all Insteon sensors use the same subnode IDs for the same things, so we need to use different logic depending on device type. Negative node and heartbeat support is now only used for leak sensors and open/close sensors.
* Use new style string formatting
* Add binary sensor detection for pre-5.x firmware
Meant to do this originally; writing documentation revealed that this requirement was missed!
All mochad devices are sharing a single socket interface. When multiple
threads are issuing requests to the mochad daemon at the same time the
write read cycle might get crossed between the threads. This is normally
not an issue for 1-way X10 devices because as long as the request issued
successfully and data is read over the socket then we know as much as
mochad will tell us (since there is no ACK from the request for most
X10 devices). However, where it does matter is on the device __init__()
because we're relying on the mochad daemon's internal state to take an
educated guess at the device's state to intialize things with. When
there are multiple devices being initialized at the same time the wires
can get crossed between and the wrong device state may be read.
To address this potential issue this commit adds locking using a
semaphore around all pairs of send_cmd() and read_data() (which is what
pymochad.device.Device.get_status() does internally) calls to the mochad
controller to ensure we're only ever dealing with a single request at a
time.
Fixesmtreinish/pymochad#4
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f823.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Refactored to new global json saving and loading
* Fixed emulated_hue tests
* Removed unnecassary error handling
* Added missing newline
* Remove unused imports
* Fixed linting error
* Moved _load_json wrapper out of the config class
* Initial commit of Vultr components
Have a working Vultr hub and binary sensor which pulls down the
following attributes of your VPS:
- Date created
- Subscription id (server id)
- Cost per month (in US$)
- Operating System installed
- IPv4 address
- label (human readable name)
- region
- number of vcpus
- which storage package chosen
- IPV6 address (if applicable)
- RAM amount
Working next on sensor and then testing / coverage.
* Added Vultr sensor for pending charges and current bandwidth. Refactored binary_sensor and hub too
* Corrected is_on bases
* Added basic tests for Vultr binary & platform
* Updated require files
* Changing test fixture to highlight different cases
* Written basic test for sensor.vultr
* Resolved linting errors and broken test
* Increase test coverage and corrected docs
* Resolved hound issues
* Revert back negative binary test
* Another hound resolve
* Refactoring and adding is switch, moving over to vultr branch
* Made Vultr components more resiliant to invalid configs
* Added negetive test for vultr binary sensor
* Added better testing of vultr sensor
* Resolved vultr platform test affecting subsequent vultr tests
* Moving VULTR components to single use design
* Added in sensor name config
* Added missing sensors var
* Resolved init data setting of sensors, added in name conf to switch
* Made the Vultr component more resiliant to startup failure with better alerting
* Various Vultr component changes
- Refactored sensor, binary_sensor, and switch to reference one subscription
- Renamed CURRENT_BANDWIDTH_GB monitored condition to CURRENT_BANDWIDTH_USED
- Improved test coverage
* Resolved local tox linting issue
* Added more testing for Vultr switch
* Improved test coverage for Vultr components
* Made PR comment changes to vultr binary sensor
* Made PR comment changes to Vultr sensor
* resolved PR comments for Vultr Switch
* Resolved vultr sensor name and improved tests
* Improved Vultr switch testing (default name formatting)
* Removed vultr hub failure checking
* Refactor Neato botvac components as a vacuum
A switch is still use to enable/disable the schedule
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* CI Hound fixes
* Fix lint errors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* [Neato vacumm] Add sensor attributes to vacuum
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Remove line breaks and fix docstring
* PR fixes
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Added Base Support for Linode
* Removed unused Attr
* Corrected some Typos
* updated requirements & coveragerc
* added import to prevent var not declared errors in linter
* Fixed Typo
* Added Switch Component for Linode and corrected some errors if data was blank
* Updated api lib to hopefully remove dependancy on enum34
* Fixed Reference error
* fix pylint errors
* Update linode.py
* Update linode.py
* Update linode.py
* Update linode.py
* Support for different device types of MIIO switches: Xiaomi Smart WiFi Socket (called Plug), Xiaomi Smart Power Strip and Xiaomi Chuang Mi Plug V1.
* Line too long fixed.
* Trailing whitespace removed.
* Changes based on review.
* Line too long fixed.
* No blank lines allowed after function docstring fixed.
* The underlying library is called python-miio now. Imports and requirements updated.
* TODO comment removed. Travis complains about.
* Blank line removed.
* Code clean-up.
* Revert "Code clean-up."
This reverts commit 96b191c7a6.
* Unused platform constant removed.
* Initial support for SNMP switch
Supports setting integer values
* Resolves styling issues
* Updates requirements
* Remove commented out import
* Changes default community to private. Fixes linting errors.
* More linter fixes and bugfix in #state()
* Refactors the code to make it simpler.
* Xiaomi Air Purifier 2 integration
* Flake8 errors fixed.
Changes based on review.
* Service domain ("fan") updated and services properly prefixed by xiaomi_miio.
* The underlying library is called python-miio now. Imports and requirements updated.
* Version bumped. The underlying library is called python-miio now.
* Added Toon support again
* Forgot about .coveragerc
* Fixed style issues
* More styling and importing fixes
* Implemented the suggestions made by @pvizeli
* The smallest fix possible
* Removed custom names for Toon states
* Fix last push with 2 outdated lines
* Removed HOME and NOT_HOME, moved to just climate states
* Bumped dependency for better handling of smartplugs that don't report power consumption
* Implemented changes as suggested by @balloob
* Rebase, gen_requirements_all.py finally working
* Xiaomi Smart WiFi Socket and Smart Power Strip integration
* Comment updated.
* Blank line removed.
* Typo fixed.
* Version of python-mirobo bumped.
* Version of python-mirobo bumped: Lightweight API changes.
* Additional API changes.
* Library version properly pinned again.
* Platform not ready behavior fixed.
Expose the device model as sensor attribute.
Device initialized log message added. Provides device model, firmware and hardware version.
* Component renamed: switch.xiaomi_plug -> switch.xiaomi_miio
* Revise based on review: Unused code removed. Filename updated.
* New Skybell platform with components
* Added skybell components to omit.
* Preemptively fixing lint issues (hopefully).
* Removed unused variable.
* Requested changes.
* Additional CRs
* Hopefully the last of the CR's!
* bump the pyhs100 version and fix api changes
* switch.tplink: avoid I/O during __init__
* initialize _name to None in __init__
* update requirements_all.txt for the new version
* Introducing support to Melnor RainCloud sprinkler systems
* Make monitored_conditions optional for sub-components
* Part 1/2 - Modified attributes, added DATA_ constant and using battery helper
* Part 2/2 - Refactored self-update hub
* Fixed change requested:
- Dispatcher signal connection
- Don't send raincloud object via dispatcher_send()
- Honoring the dynamic scan_interval value on track_time_interval()
* Inherents async_added_to_hass() on all device classes
* Makes lint happy
* * Refactored RainCloud code to incorporate suggestions.
Many thanks to @pvizelli and @martinhjelmare!!
* Removed Entity from RainCloud sensor and fixed docstrings
* Update raincloud.py
* Update raincloud.py
* fix lint
* renamed add_devices to async_add_devices according to hass naming scheme
* replaced some occurencies of async_add_entites to async_add_devices
* fixed unit test
* fixed unit test
* Updated to latest AbodePy version. Added services and events. Added new device types. Added exclude, light, and polling config options.
* Disable the event service if polling is enabled.
* Addressed all CR's
* Removed duplicated super call.
* Name config option now used. Removed deprecated DEFAULT_NAME.
* Modified partial to move event to first param.
* rename xiaomi to xiaomi_aqara
* rename xiaomi vacuum and xiaomi phillips light to xiaomi miio
* update discovery and tests
* style
* update discovery and tests
* Still use Philips as name
* Add HTTP Basic auth to RESTful Switch
* Remove redundant hass passing
* Initialize to current state
The state used to be None until the first periodic poll.
This commit refactors async_update so it can be used during setup as well,
allowing the state to start out with the correct value.
* Refactor turn_on/turn_off device communication
* Remove lint
* Fix Travis errors
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
* flux: fix for when stop_time is after midnight
* flux: fix imports
* flux: add missing check when now is after midnight
* flux: one more try; should fix all use cases now
* flux switch: fix lint
* flux switch: add new tests
* flux switch: fix tests lint
* flux switch: fix tests docstrings
* Updated abodepy version to 0.7.1
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Bumped version to 0.8.2. Modified code to work with new constants and properties. Added cover and switch.
* Fixed hound violations.
* Updated to 0.8.3 to fix small bug with standby mode. Fixed comment in cover/abode.py.
* Fix lint issues
* Removed excessive logging. Moved device callback registration to async_added_to_hass. Moved abode controller from global into hass data.
* Removed explicit None from dict.get()
* Move device class into the constructor.
* Changed constant name to platforms.
* Changes as requested.
* Removing stray blank line.
* Added blank line of which I'm not sure how it was removed.
* Updated version to 0.9.0. Fixed motion sensor. Added power_switch_meter device type.
* Update abode.py
* fix lint
* Fix and optimize digitalloggers platform
* Fix line length
* Fix hanging indentation
* Add missing docstring
* Add period to end of docstring
* Add second blank line
- pyrainbird 0.0.9 allows the override (if ever needed) connection retry/sleep
- Forces state towards the Entity when switching the switches. Gives better UI experience.
* Refactor mysensors callback and add validation
* Add mysensors entity class. The mysensors entity class inherits from
a more general mysensors device class.
* Extract mysensors name function.
* Add setup_mysensors_platform for mysensors platforms.
* Add mysensors const schemas.
* Update mysensors callback and add child validation.
* Remove gateway wrapper class.
* Add better logging for mysensors callback.
* Add discover_persistent_devices function.
* Remove discovery in mysensors component setup.
* Clean up gateway storage in hass.data.
* Update all mysensors platforms.
* Add repr for MySensorsNotificationDevice.
* Fix bug in mysensors climate target temperatures.
* Clean up platforms. Child validation simplifies assumptions in
platforms.
* Remove not needed try except statements. All messages are validated
already in pymysensors.
* Clean up logging.
* Add timer debug logging if callback is slow.
* Upgrade pymysensors to 0.11.0.
* Make dispatch callback async
* Pass tuple device_args and optional add_devices
* Also return new_devices as list instead of dictionary.
* Pilight switch: restore last state after restart
This uses the restore_state helper to set the last known state to
pilight switches when the devices are initialized after a HA
restart.
Without this HA forget the state on every restart and needs to be told
the sttae by retoggling the switches. This can cause unwanted effects
as a switch toggling may emit an RF signal.
* Make hound happy
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Remove entity_id generation as requested in review.
* Make hound happy again.
* fix comments
* fix lint
* Add support for Automatic OAuth2 authentication
* Fix async conversion of configurator
* Rename method for async
* Use hass.components to get configurator component
* Fix typo
* Move session data to hidden directory
* Make configurator callback optional
Nate Clark
Robert Svensson
rafale77
Fabian Affolter
Thomas Delaet
Paulus Schoutsen
Jens Østergaard Nielsen
Peter Nijssen
Ville Skyttä
Anders Melchiorsen
Ryan Davies
Tom Harris
huangyupeng
Paul Klingelhuber
Mattias Welponer
Andy Castille
Daniel Shokouhi
Adam Mills
Martin Hjelmare
Marcelo Moreira de Mello
Thibault Cohen
Andrey
Sebastian Muszynski
Teemu R
Matt Snyder
Aaron Bach
Sergiy Maysak
David Ryan
William Scanlon
damarco
thepotoo
Diogo Gomes
Simon Hörrle
Otto Winter
engrbm87
Kerwin Bryant
Daniel Høyer Iversen
Heiko Thiery
Khole
Josh Anderson
Matthew Garrett
Timmo
ikucuze
Andrew
Johann Kellerman
Dan Nixon
Erik Eriksson
Sergio Viudes
Per Osbäck
Andrei Pop
Mark Perdue
Steve Easley
Alan Tse
Maximilian Früh
Pascal Vizeli
Julius Mittenzwei
Henrik Nicolaisen
Jon Maddox
tadly
Gerben Meijer
Otto Winter
Nash Kaminski
Paul Annekov
Wolf-Bastian Pöttner
Ulrich Dobramysl
Cameron Llewellyn
Alex Osadchyy
Greg Laabs
Frantz
Jordy
Zio Tibia
Dan Chen
Matthew Treinish
Alan Fischer
Stefan Lehmann
Rendili
Markus Nigbur
ziotibia81
Alok Saboo
Steve Edson
Matthew Donoughe
Stefan Jonasson
Adam Cooper
Hugo Dupras
David Grant
Ryan McLean
Georgi Kirichkov
Hydreliox
Abílio Costa
William Scanlon
boltgolt
J.J.Barrancos
Sergey Isachenko
Mister Wil
Johan Bloemberg
Michael Prokop
Marcel Holle
giangvo
upsert
emlt
Christian Brædstrup
Dale Higgs
Jan Losinski
timstanley1985
karlkar