* Create zwave devices on OZW thread and only add them during discovery.
* Read and write devices dict from loop thread.
* More async
* replace callback with coroutine
* import common function instead of callin git
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connection working again
* Async add devices is working via callback now
* Beginning to interface with PLM library for control and state
* Deal with brightness in 255 levels with library
* Change sub names to match API changes
* Remove PLM-level update callback
* Support dimmable based on underlying PLM device attributes
* Expand to non-light platforms
* Stubs for turn on and off
* Current version of Python library
* Amend to use switch device attributes
* Use asyncio endpoints for control
* Add logging line
* Bump module version to 0.7.1
* Auto-load platforms, display device info/attributes
* Unify method name for getting a device attribute
* Require Current version of insteonplm module
* Import the component function in each platform in the balloob-recommend manner
* For consistency, handle switch state as onlevel just like lights
* Use level 0xff for on state, even with binary switches
Observing the behavior of a 2477S switch, it looks like even the non-dimmable
devices use 0x00 and 0xff for off/on respectively. I was using 0x01 for on
previously, but that yields unnecessary state change callbacks when message
traffic ends up flipping the onlevel from 0xff to 0x01 or 0x01 to 0xff.
* Use sensorstate attribute for sensor onoff
* Move new device callback to devices attribute
* Add support for platform override on a device
* Bump version of insteonplm module
* Default overrides is an empty list
* Avoid calling private methods when doing common attributes
* Remove unused CONF_DEBUG for now
* flake8 and pylint code cleanup
* Move get_component to local function where it is needed
* Update to include insteonplm module.
* New files for insteon_plm component
* Legitimate class doctring instead of stub
* Docstring changes.
* Style changes as requested by @SEJeff
* Changes requested by @pvizeli
* Add @callback decorator to callback functions
* Opportunistic platform loading triggered by qualifying device detection
Instead of loading all the constituent platforms that comprise the insteon_plm
component, instead we defer and wait until we receive a callback for a device
that requires the platform.
* First round of not using values directly
* Round two
* lint
* Round four
* Conflict
* Round five
* Update zwave.py
* round six
* Docstring
* flakywakie
* Fetch values in constructor
* Blank line removal
* Set attributes in callback
* Docstring
* Round seven
* Ughgit add homeassistant/components/lock/zwave.py!
* Sloppy code
* Add aurora sensor
* allow custom forecast threshold for aurora binary sensor
* move AuroraGateway functionality to Aurora data object to conform with HA standards
* improve warning message when template is none
* improve error message when template is none
* improve error message when template is none
* improve error message when template is none
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
* Fix for missing netatmo tags in 0.37
Also fix issue with SSL certificate for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Netatmo welcome: vpn_url can be empty
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* add config floag to disable SSL verification for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Import CONF_VERIFY_SSL from const
* add a small sleep before reading the sensor
The read of the sensor might be incorrect if it's read too soon after the setup_input call. It might be isolated to my case where I rely on the the PI internal PULL, but once I added this sleep I never get false initial read. If you think this change is appropriate please merge it.
* Update rpi_gpio.py
* Update rpi_gpio.py
* Update rpi_gpio.py
* Using new MaxShutterContact class
* Skip unnecessary function calls
* Added casting for VALUE
* Some renaming to clarify what's happening
* Bumped dependency version
* Bumped version in requirements
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* pylint disable import error
* read_input() changed to return boolean value, according changes in binary sensor
* example configuration in docstring changed to mention direct web link, pylint update
* read_input() updated according review
* Add mysensors notify platform
* Make add_devices optional in platform callback function.
* Use new argument structure for all existing mysensors platforms.
* Add notify platform.
* Update mysensors gateway.
* Refactor notify setup
* Enable discovery of notify platforms.
* Update and add tests for notify component and some platforms.
* Continue setup of notify platforms if a platform fails setup.
* Remove notify tests that check platform config. These tests are not
needed when config validation is used.
* Add config validation to APNS notify platform.
* Use discovery to set up mysensors notify platform.
* Add discovery_info to get_service and update tests
* Add discovery_info as keyword argument to the get_service function
signature and update all notify platforms.
* Update existing notify tests to check config validation using test
helper.
* Add removed tests back in that checked config in apns, command_line
and file platforms, but use config validation test helper to verify
config.
* Add a test for notify file to increase coverage.
* Fix some PEP issues.
* Fix comments and use more constants
* Move apns notify service under notify domain
* Update nx584 requirement to 0.4
There have been a few bug fixes to nx584 since 0.2, so this just updates
our requirement to pull in the newer version.
* Fix nx584 if no partitions are found
If we succeed in our connection to the panel but find no
configured partitions, then we will fall through to the bypass
probe and fail because 'zones' is never initialized. This fixes
both exception paths and adds a test that would poke it.
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
Pascal Vizeli
John Mihalic
Wolf-Bastian Pöttner
Andrey
Erik
David McNett
William Scanlon
Erik Eriksson
John Arild Berentsen
Walker Boyle
Adam Mills
Daniel Høyer Iversen
Fabian Affolter
Hugo Dupras
snagytx
Daniel Perna
Martin Vacula
R1chardTM
Giel Janssens
Martin Hjelmare
Dan Smith
Mark
Josh Nichols