Back in "ubus: Refresh session on Access denied (#8111)" I added the
decorator _refresh_on_acccess_denied. Somehow that stopped multiple ubus
trackers from working in parallel, and only the one first init'ed
worked.
Changing the order of the decorators fixes the issue but, I'm sorry to
say I can't figure out why. There's some magic somewhere which I'm
missing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Fix TP-Link device tracker regression since 0.49
This regression was introduced by #8322.
Fix is to utf encode the password like the other TP-Link backends do.
* Fix linting issue introduced in previous commit
Commit in question: 677f3fbb7f
According to the documentation, the `value_template` for the REST
binary_sensor is not required. However, if you don't provide this when
setting up a binary sensor, the component fails. Looks like a variable
was not being set, which I've now included.
This should make the REST binary sensor act the same way as the REST
sensor now.
* make attributes in the fritzdect module easier to process
* remove spaces in attribute names
* move units to separate attributes
* make attributes in the fritzdect module easier to process
* remove spaces in attribute names
* move units to separate attributes
* Use new python formating syntax and attribute constant
* Shorten too long line
* Fix indent
* Add support for multiple ping utilities.
* Added support for differing flavours of ping included with
different distributions (specifically alpine linux for hassio's
homeassistant).
* Updated as per comments in PR
* Add intent component
* Add intent script component
* Add shopping list component
* Convert Snips to use intent component
* Convert Alexa to use intent component
* Lint
* Fix Alexa tests
* Update snips test
* Add intent support to conversation
* Add API to view shopping list contents
* Lint
* Fix demo test
* Lint
* lint
* Remove type from slot schema
* Add dependency to conversation
* Move intent to be a helper
* Fix conversation
* Clean up intent helper
* Fix Alexa
* Snips to use new hass.components
* Allow registering intents with conversation at any point in time
* Shopping list to register sentences
* Add HTTP endpoint to Conversation
* Add async action option to intent_script
* Update API.ai to use intents
* Cleanup Alexa
* Shopping list component to register built-in panel
* Rename shopping list intent to inlude Hass name
* The gateway configuration accepts a MAC address or a SID value in uppercase already.
The ringtone services accepts the same values now. I hope it will avoid confusion.
* Device support for the new wall switches with neutral lead (ctrl_ln1, ctrl_ln2) added.
* Measurement unit from pressure of weather.v1 fixed.
* Device support for sensor_magnet.aq2 added.
* Device support for sensor_motion.aq2 (motion and lux) added.
* Code reformatted.
* The ringtone service (start/stop) uses the parameter gw_mac instead of gw_sid now.
* Version of the required library updated.
* Enhance python_script to support "_getitem_"
In order to use dict / list structures in python scripts we need
_getitem_ allowed in the RestrictedPython environment. There is a
default_guarded_getitem included with RestrictedPython, which is a
pass through used in the Eval code paths.
* Add tests for dict/list support in python_scripts
* Lint
* Added a service to write to KNX group addressed including documentation
* Define parameters as required
* Reformating
* Moved service documentation to service.yaml
* Moved service documentation to services.yaml
* Update knx.py
* Upgrade the alarmdecoder dependency library from 0.12.1 to 0.12.3. Nutech software who owns this library have upgraded this library with some fixes regarding arming it to home/away and then disarming the alarm. Without this upgraded library, HASS is having a problem when we try to disarm an armed alarm after around 8 hours or so.
* Updated the requirements_all.txt by running the script gen_requirements_all.py
* Add support for different stream formats
* Encapsulate logic inside MediaExtractor class
* Add CONFIG_SCHEMA
* Fix for cases when youtube-dl returns content of playlist as list
* Some images are not supported by face_recognition, so this patch treats the error
messages instead throwing a traceback. Fixes#7867
* Makes lint happy
* Initial support for Google Wifi/OnHub
* Moved state logic to update function of API class
- Throttle added to update
- State logic implementation is cleaner
- Modified tests to work with the new throttle on update
* Return a 0 temperature value when none is found
It's well documented that these TRVs will only return the current temperature
for a short time after the actuator has moved. This means that, usually, they will
not return the current temperature. Setting a non-value here causes errors in the logs
and for the TRV to not show on the dashboard at all
* Fix lint issue
The citibykes API returns "null" as value for empty_slots on some
stations (see #8527). This causes the component to not process the data.
This is fixed by accepting None as valid data. The row in the frontend
is left empty if "null" was returned by the service.
fixes#8527
data may be None if twitter data property unconfigured:
File "/opt/homeassistant/homeassistant_venv/lib/python3.4/site-packages/homeassistant/components/notify/twitter.py", line 63, in send_message
media = data.get(ATTR_MEDIA)
* Fix TP-Link device tracker regression since 0.49
This regression was introduced by #8322.
Fix is to utf encode the password like the other TP-Link backends do.
* Fix linting issue introduced in previous commit
Commit in question: 677f3fbb7f
* Make it available during state paused.
* Don't adjust for media_position_updated_at. I.e. do as vlc, sonos etc
so that returned position is the position at the time of
media_position_updated_at, not now.
* Make aiolifx modules easily available
* Use aiolifx features_map for deciding bulb features
Also move the feature detection out of Light so it is available even
during the initial detection.
* Move each LIFX light type to a separate class
* Simplify AwaitAioLIFX
This has become possible with recent aiolifx that calls the callback even
when a message is lost.
Now the wrapper can be used also before a Light is added though the register
callback then has to become a coroutine.
* Refactor send_color
* Add support for multizone
This lets lifx_set_state work on individual zones.
Also update to aiolifx_effects 0.1.1 that restores the state for individual
zones.
* Make it available during state paused.
* Don't adjust for media_position_updated_at. I.e. do as vlc, sonos etc
so that returned position is the position at the time of
media_position_updated_at, not now.
* Make aiolifx modules easily available
* Use aiolifx features_map for deciding bulb features
Also move the feature detection out of Light so it is available even
during the initial detection.
* Move each LIFX light type to a separate class
* Simplify AwaitAioLIFX
This has become possible with recent aiolifx that calls the callback even
when a message is lost.
Now the wrapper can be used also before a Light is added though the register
callback then has to become a coroutine.
* Refactor send_color
* Add support for multizone
This lets lifx_set_state work on individual zones.
Also update to aiolifx_effects 0.1.1 that restores the state for individual
zones.
The default aiolifx timers are tuned for a network with few lost packets.
This means that lights can become "unavailable" from just a two second
dropout. An unavailable light is completely useless for HA until it is
rediscovered so this is an undesirable state to be in.
These tweaks make aiolifx try harder to get its messages through to the
bulbs, at the cost of some latency in detecting lights that actually are
unavailable.
* This change will enable the functionality for Arlo Q cameras. When we added the code to enable/disable motion detection, we assumed that base station will be present for all arlo type of cameras. But found recently that Arlo Q cameras does not have base station. So, removed the base_station dependency in the init code. Also added code in enable/disable motion detection code to first check if base station is detected by library. If base station is detected then it will use it to enable the motion detection. If not detected, even if service was called, it will not do anything. Enabling/disabling the motion detection for Arlo Q cameras have to added by someone who has that camera. I don't have the Arlo Q cameras.
* Fixed a typo in the code.
* Added support for temperature_offset and humidity_offset
Some DHT sensors require some offsets to work.
* Support for temperature and humidity offset
* Changed lines with 79 characters
* Moved const to dht.py from const.py
* Changed temperature_offset range
* Removed the const
const.py is at original state.
* Fixed continuation line under-indented
* Removed first round and added debug info
* Fix -1 value issue
Fixed issue where thermostat will sometimes return a current temperature or set temperature value of -1
* Update radiotherm.py
* Update radiotherm.py
* Update radiotherm.py
Added retry limit
* Update radiotherm.py
* Update radiotherm.py
* Refactored Amcrest to use central hub component
* Set default streaming source to snapshot
* Simplified code by using discovery platforms
* Makes lint happy
* Update authentication method to basic
* Fixed lint issues
* Makes Amcrest hub async
* Make Amcrest hub IO synchronous and disabled ffmpeg dependency on sensor/amcrest.
* Removed async to load component
* Organized import order
* Update amcrest.py
Prometheus (https://prometheus.io/) is an open source metric and alerting
system. This adds support for exporting some metrics to Prometheus, using
its Python client library.
bellows 0.3.0 changes the API to have both, renaming the attribute which used
to be for input clusters in the process.
This is in preparation for remotes.
* Allow notifications to include media, with Twitter as the first implementation. The Twitter notifier uses the Twitter-recommended async chunked media/upload approach and tries to convey the correct mime type of the media. Twitter implementation based on https://github.com/geduldig/TwitterAPI/blob/master/examples/upload_video.py.
* Changes based on balloob's review:
balloob: "Please remove this file. We fixed the issue in our tests that left this artifact."
balloob: "…prefer a guard clause"
balloob: "This is very inefficient. You are now generating up to 99 values."
balloob: "Since media_id is going to be None, why not just return None and you can remove the else."
* balloob: "Other notify platforms are using ATTR_DATA for it. That way if a platform requires extra metadata, we don't need to add extra fields. So please add it to Twitter via ATTR_DATA."
* New service `send_magic_packet` in new component `wake_on_lan`
* fix
* Unit tests for new component wake_on_lan
* Add wakeonlan to tests requirements
* remove wakeonlan from tests requirements and remake the component tests
* remove wakeonlan from tests requirements
* link domain and service names to component
* fix mocking in test_setup_component
* send_magic_packet as coroutine, better use of mock_calls in tests
* fix imports
* review changes
* better async calls
* Update test_wake_on_lan.py
This commit adds support for the set_operation_mode system call to the
generic thermostat component. This enables users to set whether the
thermostat is enabled or not by either setting it to auto or off.
* New component to connect to VELUX KLF 200 Interface
* Issue #8203: modifications as suggested by hound
* Issue #8203: added entries to .coveragerc
* moving velux/__init__p.y to velux.py
* Issue #8203: Using hass.data for storing global object, updated docstrings
* Issue #8203: validation of config, using standard approach for getting config values
* Issue #8203: Exception handling if connection to velux component fails
* Issue #8203: removed unused import
* Issue #8203: Some minor changes within docstrings
* Issue #8203: Some minor changes within docstrings
* Issue #8203: added dependency for pyvlx to requirements_all.txt
* Issue #8203: less broad exception
* Issue #8203: increased version
* Issue #8203: changed position of pyvlx within requirements_all.txt
* Issue #8203: bumped version of pyvlx to 0.1.3 (better handling of retries when token expires)
* reset pointer to home-assistant-polymer
* Issue #8203: modifications as suggested by fabaff
* hound *sigh*
* use upstream RachioPy, fix manual run switches
* Update requirements for PyPi version of rachiopy
* Use upstream RachioPy 0.1.2 (partial revert of 39c6484d89)
* Revert rachiopy downgrade
* First version of a LaMetrci platform with a Notify module
* Cleanup, fix formatting bugs
* More formatting
* Formatting
* Updated requirements
* formatting
* Formatting
* More formatting
* Dummy commit for new Travis CI run
* Refactoring class methods to instance methods
* Cleanup unused classed
* Removed Eddystone_weatherurl that had nothing to do with this component
* Cleanup class methods
* Cleanup requirements
* Removed broad excepts
Removed storage of LaMetric devices
* Removed unused import
* Use user-set device names for Linksys Smart Wi-Fi routers (3)
* Newline at end of linksys_smart.py
* Remove spaces in last line of linksys_smart.py
* Update linksys_smart.py
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* UPnP mapping overlap
Addressing: https://community.home-assistant.io/t/upnp-new-module/20839
* removed whitespaces
Some devices don't seem to return the information properly when asked for
multiple attributes in one read. This separates out the reads if it didn't
work as expected the first time.
Because this data is cached in bellows, I don't expect any extra reads in
the "happy" case.
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Fix pylint issue (#8325)
* Added support for TP-Link EAP 225
* code style changes
* more code style changes
* more understandable variable name
* Added support for TP-Link EAP 225
* code style changes
* Update snips.py
* Get the list of wireless interfaces from nvram so tri-band routers
work
* ARP checks don't work reliably for ap mode so remove it, associated
list seems pretty solid
* Match on 'mac' instead of 'ip' since we can't use it for ap mode
* The `client_info_tmp` nvram reference, Asus removed it some time ago
* Update AsusWrtResult
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
* Fix checking result from a modbus transaction
* Add missing decorator
* Added modbus write coil service and added descriptions
* Removed a hiding debug print
Anton Lundin
Russell Cloran
Phil Cole
Daniel Schaal
Marcelo Moreira de Mello
Chia-liang Kao
Yannick POLLART
Anders Melchiorsen
Pierre Ståhl
Eugenio Panadero
Pascal Vizeli
Maikel Wever
Phil Hawthorne
Fabian Affolter
Thomas Klingbeil
Open Home Automation
Sean Gollschewsky
Teemu R
William Scanlon
Paulus Schoutsen
Per Osbäck
Daniel Høyer Iversen
Sebastian Muszynski
Aaron Bach
namadori
pavoni
Sean Dague
Jeff Wilson
viswa-swami
Aliaksandr
Kevin Fronczak
Thibault Cohen
Phil Lavin
Jan Losinski
Fabian Affolter
Mike Christianson
Alexander Rust
Andrey
Bryce Edwards
dersger
Dougal Matthews
Daniel Perna
Abílio Costa
Niccolò Maggioni
gitmopp
Vlad Korniev
Alan Fischer
Andrew
thecynic
Julius Mittenzwei
James Marsh
Matthew Treinish
Oliver
Andy Castille
Charles Blonde
Tom Matheussen
Simao
Diogo Gomes
Alex
PhracturedBlue
Matthew Schick
Sabesto