* Fixed NDMS for latest firmware.
Now using telnet instead of Web Interface
* Using external library for NDMS interactions
* updated requirements_all
* renamed `mac` to `device` back
* Using generators for name and attributes fetching
* Change to newer pip package
The package Adafruit_Python_DHT==1.3.2 was broken and would not install, breaking DHT sensor support in Home assistant. It has since been fixed in Adafruit-DHT==1.3.3.
See: https://github.com/adafruit/Adafruit_Python_DHT/issues/99
* Update requirements_all.txt
New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
* Comment out Adafruit-DHT
Adafruit_Python_DHT changed name to Adafruit-DHT, which still need pyx support breaking our CI, need to be comment out.
* Update requirements_all.txt
* Add Genie Aladdin Connect cover component
* Fix lines being too long
* Fix issues found in review
* remove Unknown state, use None instead
* Fixed requirements_all
* Remember last brightness value and use it on turn_on()
* Pyfnip-0.2 now returns state reliably, no manual changes needed.
* Split too long line of code
* Updated pyfnip library version
* Add a component for Sisyphus Kinetic Art Tables
The [Sisyphus Kinetic Art Table](https://sisyphus-industries.com/) uses a
steel ball to draw intricate patterns in sand, thrown into sharp relief by a
ring of LED lights around the outside.
This component enables basic control of these tables through Home Assistant.
* Fix lints
* Docstrings, other lints
* More lints
* Yet more.
* Feedback
* Lint
* Missed one piece of feedback
* - Use async_added_to_hass in media player
- async_schedule_update_ha_state in listeners
- constants for supported features
- subscripting for required keys
- asyncio.wait
- update to sisyphus-control with passed-in session
* Update requirements
* lint
* Added support for FutureNow light platform and relay/dimmer units
* Pinned specific version for requirement
* Added support for FutureNow light platform and relay/dimmer units
* Added futurenow.py to .coveragerc.
* Minor fixes and enhancements as requested in the code review.
* Minor fixes and enhancements as requested in the code review.
* Use device_config's value directly as it's validated as boolean.
* Simplify state check.
* Fixed brightness update that was broken in previous commit.
* Add spider power plug component
* rounding down the numbers
* ability to throttle the API
* updated to the lastest api
* resolved an issue within the API
* add spider thermostats
* Added load_platform. Added operation dictionary. Minor improvements
* loop over spider components for load_platform
* added empty dict to load_platform. changed add_devices
* moved logic to the API
* fix requirements_all.txt
* minor code improvements
* Add event handler to capture binary sensor on messages
* Log event trigger
* Log event firing
* Capture platform correctly
* Fix test for platform eq binary_sensor
* Create sensor events
* Add light and battery sensors
* Bump insteonplm version to 0.11.6
* Fix naming of BUTTON_PRESSED_STATE_NAME
* Fix naming of fire event methods
* Add logging
* Add DOMAIN definition
* Get state name from plm.devices
* Remove stale reference to button ID
* Fix reference to state name
* Remove incorrect ref to self
* Log remote button pressed event
* Change mode to button_mode and fix values to array
* Rename CONF_MODE to CONF_BUTTON_MODE
* Log platform create with mode
* Properly assign button_mode to track mode
* Implement is_on
* Change mini-remotes to events only
* Remove button_mode config option
* Fix reference to _fire_button_on_off_event
* Bump insteon version to 0.11.7
* Flake8 clean up
* Flake8 cleanup
* Use % format in logging per pylint
* Code review updates
* Resolve conflict
* Lint
* Support latest tplink Archer D9 Firmware version / Device Scanner
* tplink integration on pypi package
* initialize the client only once
* remove unnecessary instance attributes
This fixes a bunch of bugs, including issues with concurrency in devices
that present multiple accessories, devices that insist on the TLV entries
being in the order that Apple use, and handling devices that send headers
and data in separate chunks. This should improve compatibility with
a whole bunch of HomeKit devices.
* Update to next version with enum states
* Change to generic dimmer class
* Update of requirement files
* Update to hmip lib to v0.9.7
* Missing update of requirements files
* Cleanup of icon properties
* support for tuya platform
* support tuya platform
* lint fix
* change dependency
* add tuya platform support
* remove tuya platform except switch. fix code as required
* fix the code as review required
* fix as required
* fix a mistake
* Add Cloudflare DNS component
* Removed man
* Update .coveragerc
* Update cloudflare.py
* Update cloudflare.py
* Changed records to be required
* Fix typos, update order and other minor changes
* Add sound mode support
* continuation line indent
* indentation
* indentation
* Remove option to configure sound_mode_dict
* Sound mode support
- removed the sound_mode_raw propertie because it was not used, (still available through self._sound_mode_raw (as device attribute for automations and diagnostics)
* Detect sound mode support from device
Removed the config option to indicate if sound mode is supported.
Added detection if sound mode is supported from the receiver itself.
Pushed denonavr library to V.0.7.4
* Pushed denonavr to v.0.7.4
* Add python 3.7 to travis and tox
* Use pyyaml from github
* Don't version constraints
* Fix version tag
* Change to new pyyaml release
* Python 3.7 requires xenial
* Fix namespace detection
* Use correct RegEx type
* Update pexpect to 4.6
* Use correct validation for dictionaries
* Disable Py37 incompatible packages
* Upgrade all pexpect to 4.6
* Add explicit None as default param
* Add HomematicIP Cloud to config flow
* Inititial trial for config_flow
* Integrations text files
* Load and write config_flow and init homematicip_cloud
* Split into dedicated files
* Ceanup of text messages
* Working config_flow
* Move imports inside a function
* Enable laoding even no accesspoints are defined
* Revert unnecassary changes in CONFIG_SCHEMA
* Better error handling
* fix flask8
* Migration to async for token generation
* A few fixes
* Simplify config_flow
* Bump version to 9.6 with renamed package
* Requirements file
* First fixes after review
* Implement async_step_import
* Cleanup for Config Flow
* First tests for homematicip_cloud setup
* Remove config_flow tests
* Really remove all things
* Fix comment
* Update picture
* Add support for async_setup_entry to switch and climate platform
* Update path of the config_flow picture
* Refactoring for better tesability
* Further tests implemented
* Move 3th party lib inside function
* Fix lint
* Update requirments_test_all.txt file
* UPdate of requirments_test_all.txt did not work
* Furder cleanup in websocket connection
* Remove a test for the hap
* Revert "Remove a test for the hap"
This reverts commit 968d58cba1.
* First tests implemented for config_flow
* Fix lint
* Rework of client registration process
* Implemented tests for config_flow 100% coverage
* Cleanup
* Cleanup comments and code
* Try to fix import problem
* Add homematicip to the test env requirements
* Added support to HTTPS URLs on SynologyDSM
* Bumped python-synology to 0.1.1
* Makes lint happy
* Added attribution to Synology and fixed 3rd library version
* Fixed requirements_all.txt
* Makes SynologyDSM defaults to 5001 using SSL
* Added support for Duke Energy smart meters
* Fixed hound
* Added function docstring
* Moved strings to constants, implemented unique_id, and cleaned up setup.
* Added doc string.
* Fixed review issues.
* Updated pydukenergy to 0.0.6 and set update interval to 2 hours
* Updated requirements_all
## Description:
Switch to own packaged version of pylgnetcast
Request to make a pypi package didn't get any response: https://github.com/wokar/pylgnetcast/issues/1
**Related issue (if applicable):** #7069
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* first blood for ZhongHong HVAC Controller
* add requirements
* requirements_all.txt updated
* add zhong_hong.py to coveragerc
* add comments
* unique_id add platform name
* zhong_hong_hvac version bump to 1.0.1
* improve some coding style to match the project standard
* zhong_hong_hvac version bump to 1.0.4
* zhong_hong_hvac version require 1.0.7
* update requirements by script/gen_requirements_all.py
* zhong_hong_hvac version bump to 1.0.8
* fix startup problem
* remove unused import
* zhong_hong_hvac version bump to 1.0.9
- operation_mode: cold -> cool
* start hub listen event when all climate entities is ready
* use dispatcher to setup hub
* var name change
SIGNAL_DEVICE_SETTED_UP -> SIGNAL_DEVICE_ADDED
* async problem fix
* bugfix: set_operation_mode forget to use upper case
* stringify the exception instead of print full stack of traceback
* avoid to call str(exception) explicity
* remove unnecessary try...except clause
* remove unused import
* wink: Update to python-wink 1.8.0
This pulls in a patch to expose the GE Z-Wave in wall fan switch
as a fan component instead of a light dimmer switch component.
* Update requirements_all.txt
* Epson projector support. Version based on external library
* Epson projector support. Version based on external library
* modified epson according to MartinHjelmare review.
Added description of cmode to services.yaml
* renamed EPSON_SCHEMA to epson_schema
* removed method of getting cmode property
* removed unnecessary checks
change name of cmode service
* renamed SERVICE_ATTR_CMODE to SERVICE_SELECT_CMODE
* initial commit for kiwi door locks
bugfixes
improved attribute display
flake8
more style adjustments
* added session handling
flake8
* added requirements_all
reordered imports and flake8
attempt to pelase a very picky linter
also pleasing pylint now :)
* re-try the build
* added kiwi.py to .coveragerc
* reorganized datetime handling and attribute naming
* created pypi package for door lock library
* updated requirements_all.txt
* code review changes
* added async lock state reset for locking state
* refactored lat/lon attribute updates
* initial locked state changed from undefined to locked
* refactored is_locked property check
* handling authentication exception in setup_platform
* added more check in setup_platform
* code review changes: return type in setup_platform
* fixed logging issue
* event handling in main thread
* updated kiwiki-client to version 0.1.1
* renamed alias e to exc
* start arlo refactoring
* Refactored Arlo Hub to avoid uncessary and duplicated GETs to Arlo API
* Refactored Arlo camera component to avoid duplicate queries
* Added debug and error messages when video is not found
* Transformed Arlo Control Panel to Sync
* Makes linter happy
* Uses total_seconds() for scan_interval
* Added callback and fixed scan_interval issue
* Disable multiple tries and supported custom modes set in Arlo
* Bump PyArlo version to 0.1.4
* Makes lint happy
* Removed ArloHub object and added some tweaks
* Fixed hub_refresh method
* Makes lint happy
* Ajusted async syntax and added callbacks decorators
* Bump PyArlo version to 0.1.6 to include some enhacements
* Refined code
* added new platform for the Unitymedia Horizon HD Recorder
* improve connection handling of the horizon platform
* remove unneeded parameters and fix spelling in the horizon platform
* abort or raise exception if connection to the device could not be established
* remove channel/source list and SELECT_SOURCE feature
* remove useless type check after cast and use a try block instead
* abort or raise exception if reconnect to device fails
* remove protocol specific code and restructure sending logic accordingly
* fix indentation to be pep8 complaint
* remove unused methods/properties
* fix unnecessary pylint commands and use a return to abert outside of setup_platform
* directly access config values
* Added Uptime Robot sensor
* added newline at the end and corrected doclink
* Added changes form @cdce8p
* Convert to binary_sensor
* updated requirements
* moved to correct dir
* Update uptimerobot.py
* Initial version of wirelesstags platform support.
* Pinned wirelesstagpy, generated requirements_all.
* Fixed temperature units in imperial units systems, make binary events more tags specific.
* Lowercased tag name during entity_id generation.
* Fixed: tag_id template for tag_binary_events, support of light sensor for homebridge.
* Minor style cleanup.
* Removed state, define_name, icon. Reworked async arm/disarm update. Removed static attrs. Introduced available property. Custom events contains components name now. Cleaned dedundant items from schema definition.
* Removed comment and beep duration from attributes. Minor cleanup of documentation comment.
* Ignoring Wemo switches linked in iOS app.
* Reworked passing data from platform to components using signals.
This commit adds a new history component for the IBM Watson IoT
Platform. The IBM Watson IoT Platform allows for tracking of devices
and analytics on top of the device data. This new component allows
users to have home assistant automatically populate a watson iot
platform board with device data from devices managed by home assistant.
* Add a device tracker for Freebox routers
* Automatic setup of Freebox device tracker based on discovery
* Make the Freebox device tracker asynchronous
* initial commit
* lint
* update with pyipma
* Added test
* Added test
* lint
* missing dep
* address comments
* lint
* make sure list is iterable
* don't bother with list
* mock dependency
* no need to add test requirements
* last correction
* Version Requirement bump
Bump required version to 0.5 to allow component to work with Genie Mini clients using the clientAddr variable.
* Ran script/gen_requirements_all.py as requested.
* Change nest component to Cloud Push
Change sensors.nest, binary_sensors.nest and climate.nest to push mode
nest camera still need poll to update snapshot image
Also change nest component to async
* Flake8 lint
* Fix async_notify_errors, it is not a coroutine
* Fix pylint
* Fix pylint, function name should shall shorter than 32
* Use dispatcher helper instead event bus
* Use async_update_ha_state(True)
* Refactoring load_platform
Move service registration into async_setup_nest(),
resolve an issue that before the first time configuration done,
set_mode service should not be registered
* Fix an issue that authorization failure may leave a blocked thread
* Pylinting
* async_nest_update_callback => async_update_state to avoid confusion
* Move signal handler register to async_added_to_hass
* Better handle nest api error
* Remove unnecessary register for binary_sensor
* Remove unused import
* Upgrade to python-nest 4.0.1
Fix a thread race condition issue
* Address my own comments
* Address my own comment
* Starting to add attributes
* All attributes added to programs
* Basic zone attributes in place
* Added advanced properties for zones
* We shouldn't calculate the MAC with every entity
* Small fixes
* Basic framework for push in play
* I THINK IT'S WORKING
* Some state cleanup
* Restart
* Restart part 2
* Added stub for service schema
* Update
* Added services
* Small service description update
* Lint
* Updated CODEOWNERS
* Moving to async methods
* Fixed coverage test
* Lint
* Removed unnecessary hass reference
* Lint
* Lint
* Round 1 of Owner-requested changes
* Round 2 of Owner-requested changes
* Round 3 of Owner-requested changes
* Round 4 (final for now) of Owner-requested changes
* Hound
* Updated package requirements
* Lint
* Collaborator-requested changes
* Collaborator-requested changes
* More small tweaks
* One more small tweak
* Bumping Travis and Coveralls
* Added the Hydrawise component.
* Fixed lint errors.
* Multiple changes due to review comments addressed.
* Simplified boolean test. Passes pylint.
* Need hydrawiser package version 0.1.1.
* Added a docstring to the device_class method.
* Addressed all review comments from MartinHjelmare.
* Changed keys to single quote. Removed unnecessary duplicate method.
* Removed unused imports.
* Changed state to lowercase snakecase.
* Changes & fixes from review comments.
* Add support for climatic devices
* Update requirements_all
* Change icon to mdi:thermostat
* Update of homematicip-rest-api lib version
* Remove all mode or state relevant things - will come later
* Add current_operation again to see proper status
* Remove STATE_PERFORMANCE import
* Remove trailing whitespace
* Update requirements file
* Added platform lw12wifi for Lagute LW-12 Wifi Lights
Supported features:
* RGB colors
* Variable brightness
* 29 effects
* Changing transitions speed for animated effects
* Added lw12wifi to the list of omitted files to test
* Added lw12 module as new requirement for lw12wifi platform
* Added configuration example docstring for platform lw12wifi
* Updating code according to review in PR:
* Removed unused imports: enum, socket.
* Unused and not imported feature SUPPORT_FLASH was removed.
* Unused import lw12 in setup_platform method removed.
* Fixed indention for valuptuous.
* Changed check if effect is None.
* Removed personal debug output.
* Blocking function are not async anymore.
* Further improvements to satisfy PR.
* Unused import asyncio removed.
* Fixed: Return value and docstring no match up for `assumed_state`.
* Check if the set effect is supported, otherwise revert to normal light.
* Added describing missing docstrings to all functions.
* Adopted code to work with HS color setting.
* Syntactical change in comment.
* Removed redefinition of DOMAIN.
* Refactored lw12 controller setup: removed requirement for host and port in LW12Wifi class.
* Rewritten supported feature setup to a more static expression.
* Removed unused rgb_color property
* Fixed typo in comment for set_light_option
* Changed RGB option validation schema
* Removed instance properties as config options
* Removed optional settings to be more inline with code style.
* Removed unused option from config example
* Removal of unused import
* Added property to disable state polling for this entity.
* Raise an exception if an unknown effect was selected.
* Fixed an issue with the check for known effects.
* As we do not need to set a default, use simple accessing by key.
* Log if an unknown effect was selected.
* Added link to future documentation.
After 2 months of being offline, the my.chevy website seems to be
working again. Some data structures changed in the mean time. The new
library will handle multiple cars. This involves a breaking change in
slug urls for devices where these now include the car make, model, and
year in them.
Discovery has to be delayed until after the initial site login to get
the car metadata.
* add familyhub.py camera
* fix import and REQUIREMENTS
* add to coveragerc
* fix formatting to make houndci-bot happy
* ran scripts/gen_requirements_all.py
* use CONF_IP_ADDRESS
* Revert "ran scripts/gen_requirements_all.py"
This reverts commit 3a38681d8a.
* fix library name
* add missing docstrings and enable polling
* Sort imports
This commit bumps the pycmus version used by the cmus component. There
was a bug in the previous version used, 1.0.0, when running in local
mode. This was caused by a mtreinish/pycmus#1 and also was reported in
the home-assistant forums (but not as an issue):
https://community.home-assistant.io/t/cant-install-cmus-component/7961
Version 0.1.1 of pycmus fixes this issue so it should work properly for
users running cmus and home-assistant on the same machine.
* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Gogogate2 - bump version
Uses latest version of library which ensures commands to device are idempotent
* Update requirements_all
* Expose sensor temperature
* update version
* import attribute
* Set temperature
* Remove temperature attribute
Removed temperature attribute until it can be re-implemented as a separate sensor.
* Update ordering
* Fix copy-&-paste issue
* Setup all-linking service
* Remove extra line
* Remove linefeed and tab escape chars
* Add services delete_all_link, load_all_link_database and print_all_link_database
* Check if reload is set
* Confirm entity is InsteonPLMEntity before attempting to load or print ALDB
* Debug load and print ALDB
* Debug print aldb
* Debug print_aldb
* Get entity via platform
* Track Insteon entities in component
* Store entity list in hass.data
* Add entity to hass.data
* Add ref to hass in InsteonPLMEntity
* Pass hass correctly to InsteonPLMBinarySensor
* Fix reference to ALDBStatus.PARTIAL
* Print ALDB record as string
* Get ALDB record from memory address
* Reformat ALDB log output
* Add print_im_aldb service
* Remove reference to self in print_aldb_to_log
* Remove reference to self in print_aldb_to_log
* Fix spelling issue with load_all_link_database service
* Bump insteonplm to 0.9.1
* Changes from code review
* Code review changes
* Fix syntax error
* Correct reference to cv.boolean and update requirements
* Update requirements
* Fix flake8 errors
* Reload as boolean test
* Remove hass from entity init
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Add first version of the Matrix bot
* It's a stupid but necessary change…
* Dont list it twice
* All hail the linter!
* More linter-pleasing
* Use the correct user ID
* Add expression commands
* Add tests for new validators
* Fix room alias handling
* Wording
* Defer setup
* Simplify commands
* Handle exceptions
* Update requirements
* Review
* Move login back to constructor
* Fix review comments
* Add basic PostNL sensor (WIP)
* Update PostNL sensor
* Bump version
* Small updates to PostNL package based on feedback
* Remove unused import
* Pass api to sensor
* Refactor based on feedback
* Update based on feedback
* Fix feedback
* Clean up
* Bugfiix
* Bugfix
* SCAN_INTERVAL fix
* Remove unused import
* Refactor for new wrapper implementation
* Update postnl package requirement
* Change throttle logic
* Update package version
* Add new line
* Minor changes
* Change refresh time to 30 minutes
* Update requirements_all.txt
There's one particular QNAP model which sometimes return empty/null temperatures
for certain disks. This commit ensures that this model can be integrated with HASS
without causing KeyErrors or other exceptions - if this edge case is hit, the
sensor will simply show `0` instead.
* Recode to async version of homematicip-rest-api
* Remove blank line
* Cleanup of access point status class
* Fix to loong line
* Fix import errors
* Bugfix missing wait the _retry_task for sleep command
* Update comment
* Updates after review
* Small updates of logging and property name
* Fix DOMAIN and revert back to lowercase snakecase strings
* Fix intention and tripple double quotes
* Fix travis build
* Remove unnecessary state attributes
* Fix optional name in configuration
* Further reduction of state attributes
* Handle HomeKit configuration failure more cleanly
Add support for handling cases where HomeKit configuration fails, and give
the user more information about what to do.
* Don't consume the exception for a homekit.UnknownError
If we get an UnknownError then we should alert the user but also still
generate the backtrace so there's actually something for them to file in
a bug report.
* Fix up Eufy handling of colour lights
The Eufy colour lights have separate colour and temperature modes, and give
much less light output when in colour mode. Brightness is also handled in
a slightly confusing way, which means that state must be maintained in
order to avoid switching the light between modes by accident. Add some
additional handling for that.
* Bump the lakeside version
This version has important bugfixes for colour bulbs.
* Hound fixes
* Adding USCIS component
* Adding Line after the class DOC
* Update : Extract USCIS logic code to Component
* Update : Extract USCIS logic code to Component
* Adding CURRENT_STATUS
* Change Error handling, remove date from attributes
* Update the Version for USCIS
* Update uscis.py
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
Fabian Affolter
John Arild Berentsen
Andrey Kupreychik
superpuffin
Josh Shoemaker
Juha Niemi
starkillerOG
Peter Nijssen
Jonathan Keljo
Alan Fischer
JC Connell
Paulus Schoutsen
Eduard van Valkenburg
Jan Collijs
Daniel Shokouhi
Daniel Perna
Anders Melchiorsen
Martin Hjelmare
William Scanlon
Giel Janssens
Tom Harris
Dario Iacampo
Matthew Garrett
Luke Fritz
Andrey
Mattias Welponer
huangyupeng
Joakim Sørensen
Ville Skyttä
Marcelo Moreira de Mello
Aaron Bach
Robert Svensson
Andy Castille
Vignesh Venkat
Alex Barcelo
Luc Touraille
Jason Hu
Paulus Schoutsen
Thibault Cohen
Dejan Dakić
gstorer
Teemu R
John Mihalic
ruohan.chen
Nick Whyte
ArrayLabs
Pawel
Hate-Usernames
Christoph Gerneth
Ben Lebherz
Dan Klaffenbach
Fabian Affolter
Sergiy Maysak
Matthew Treinish
Roman
Simon Nørager Sørensen
Hugo Dupras
Sebastian Muszynski
Diogo Gomes
Jason Woodford
Mick Vleeshouwer
Tristan Caulfield
Pierre Ståhl
cdce8p
Enrico Berndt
MizterB
guillaume1410
David Ryan
Marius Kotlarz
Gregory Benner
Robert Beal
Julian Knauer
Russell Cloran
Oliver
Kerwin Bryant
Greg Dowling
Sean Dague
thelittlefireman
ChristianKuehnel
Nate Clark
c727
Daniel Høyer Iversen
David Broadfoot
Gerard
Javier Gonel
Jerad Meisner
Jesse Newland
Lukas Barth
Erik Eriksson
Mathieu Velten
Mohamad Tarbin
engrbm87
Charles Garwood
ratcash
Colin O'Dell
Mitko Masarliev
Johann Kellerman
Rohan Kapoor
Viorel Stirbu
koolsb
Mister Wil
Heiko Thiery
karlkar
Fabien Piuzzi
Khole
geekofweek
Marco Orovecchia
citruz