* Initial "group members assume state" implementation for ZHA
* Remove left-over debug flag (where polling was disabled)
* Implement _send_member_assume_state_event() method and also use after turn_off
* Only assume updated arguments from service call to group
* Make code more readable and change checks slightly
* Move "send member assume state" events to LightGroup on/off calls
* Include new config option in tests
* Check that member is available before updating to assumed state
* Lower "update group from child delay" for debouncer to basically 0 when using assumed member state
* Allow "child to group" updates regardless of config option
This is not needed, as group members will not update their state, as long as they're transitioning. (If a group transitions, it also sets its members to transitioning mode)
This fixes multiple issues. Previously, the state of a group was completely wrong when:
- turn on group with 10 second transition
- turn on members individually
- turn off members individually
- group state would not update correctly
* Move "default update group from child delay" constant
* Change to new constant name in test
* Also update fan test to new constant name
* Decrease "update group from child delay" to 10ms
In my testing, 0.0 also works without any issues and correctly de-bounces child updates when using the "assume state option".
This is just for avoiding multiple state changes when changing the group -> children issue individual updates.
With 2 children in a group and delay 0, both child updates only cause one group re-calculation and state change.
0.01 (10ms) should be plenty for very slow systems to de-bounce the update (and in the worst case, it'll cause just another state change but nothing breaks)
* Also implement "assuming state" for effect
Not sure if anybody even uses this, but this one is a bit special because the effect is always deactivated if it's not provided in the light.turn_on call.
* Move shortened delay for "assuming members" to a constant
* Add basic test to verify that group members assume on/off state
* Move _assume_group_state function declaration out of async_added_to_hass
* Fix rare edge-case when rapidly toggling lights and light groups at the same time
This prevents an issue where either the group transition would unset the transition flag or the single light would unset the group transition status midst-transition.
Note: When a new individual transition is started, we want to unset the group flag, as we actually cancel that transition.
* Check that effect list exists, add return type
* Re-trigger CI due to timeout
* Increase ASSUME_UPDATE_GROUP_FROM_CHILD_DELAY slightly
The debouncer is used when updating group member states either by assuming them (in which case we want to barely have any delay), or between the time we get the results back from polling (where we want a slightly longer time).
As it's not easily possible to distinguish if a group member was updated via assuming the state of the group or by the polling that follows, 50 ms seems to be a good middle point.
* Add debug print for when updating group state
* Fix issues with "off brightness" when switching between group/members
This fixes a bunch of issues with "off brightness" and passes it down to the members correctly.
For example, if a light group is turned off with a transition (so bulbs get their level set to 1), this will also set the "off brightness" of all individual bulbs to the last level that they were at.
(It really fixes a lot of issues when using the "member assume group state" option. It's not really possible to fix them without that.)
Furthermore, issues where polling was previously needed to get the correct state after "playing with transitions", should now get be resolved and get correct state when using the "members assume group state" option.
Note: The only case which still can't be fixed is the following:
If individual lights have off_with_transition set, but not the group, and the group is then turned on without a level, individual lights might fall back to brightness level 1 (<- at least now shows correctly in UI even before polling).
Since all lights might need different brightness levels to be turned on, we can't use one group call. But making individual calls when turning on a ZHA group would cause a lot of traffic and thereby be counter-productive.
In this case, light.turn_on should just be called with a level (or individual calls to the lights should be made).
Another thing that was changed is to reset off_with_transition/off_brightness for a LightGroup when a member is turned on (even if the LightGroup wasn't turned on using its turn_on method).
off_with_transition/off_brightness for individual bulbs is now also turned off when a light is detected to be on during polling.
Lastly, the waiting for polled attributes could previously cause "invalid state" to be set (so mid-transition levels).
This could happen when group and members are repeatedly toggled at similar times. These "invalid states" could cause wrong "off brightness" levels if transitions are also used.
To fix this, we check after waiting for the polled attributes in async_get_state to see if a transition has started in the meanwhile. If so, the values can be discarded. A new poll will happen later and if using the "members assume group state" config option, the values should already be correct before the polling.
* Enable "group members assume state" config option by default
The config tests are also updated to expect the config option be enabled by default.
For all tests, the config option is generally disabled though:
There are only two group related tests. The one that tests this new feature overrides the config option to be enabled anyway.
The other tests works in a similar way but also "sends" attribute reports, so we want to disable the feature for that test.
(It would also run with it enabled (if the correct CHILD_UPDATE value is patched), but then it would test the same stuff as the other test, hence we're disabling the config option for that test.)
* Implement WS API endpoints for zigpy backups
* Implement backup restoration
* Display error messages caused by invalid backup JSON
* Indicate to the frontend when a backup is incomplete
* Perform a coordinator backup before HA performs a backup
* Fix `backup.async_post_backup` docstring
* Rename `data` to `backup` in restore command
* Add unit tests for new websocket APIs
* Unit test backup platform
* Move code to overwrite EZSP EUI64 into ZHA
* Include the radio type in the network settings API response
* Add ZHA config option for "enhanced light transition from an off-state"
* Default option to disabled
* Always disable "enhanced light transition" for ZHA LightGroups
* Rename _enhanced_light_transition to _zha_config_enhanced_light_transition
* Remove LightGroup check, as config option always disables for groups
* Remove duplicated line
* Remove duplicated line
* Move ZHA config transition line below other config line
* Renamed comments of renamed variable in tests
color_provided_while_off -> new_color_provided_while_off
* Enable "enhanced light transitions" for testing
* Make unit tests pass
* Flip response type check to not rely on it being a list
https://github.com/zigpy/zigpy/pull/716#issuecomment-1025236190
* Bump zigpy and quirks versions to ZCLR8 releases
* Fix renamed zigpy cluster attributes
* Handle the default response for ZLL `get_group_identifiers`
* Add more error context to `stage failed` errors
* Fix unit test returning lists as ZCL request responses
* Always load quirks when testing ZHA
* Bump zha-quirks to 0.0.69
* Refactor HVAC channel to use zigpy cached attributes
* Allow named attributes in ZHA test attribute reports
* Let attribute write to update cache
* WIP Update tests
* Cleanup
* Replace ZHA tests FakeDevice
* Refactor ZHA tests to use zigpy devices and endpoints
* Use common consts for zigpy device mocks
Use the same dict key names for device signature mocks as zha quirks.
* Use const for test device list
* Update tests/components/zha/common.py
* start implementation of IAS ACE
* starting alarm control panel
* enums
* use new enums from zigpy
* fix import
* write state
* fix registries after rebase
* remove extra line
* cleanup
* fix deprecation warning
* updates to catch up with codebase evolution
* minor updates
* cleanup
* implement more ias ace functionality
* cleanup
* make config helper work for supplied section
* connect to configuration
* use ha async_create_task
* add some tests
* remove unused restore method
* update tests
* add tests from panel POV
* dynamically include alarm control panel config
* fix import
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
* Refactor ZHA config flow
Present more descriptive list of radio types when user has to pick one.
* Update docstring.
* Add some common models to EZSP radio.
* Add more model names
More model names, less english since radio types won't be translated.
* Start gateway using new zigpy init.
Update config entry data import.
Use new zigpy startup.
Fix config entry import without zha config section.
Auto form Zigbee network.
* Migrate config entry.
* New ZHA config entry flow.
Use lightweight probe() method for ZHA config entry validation when
available. Failback to old behavior of setting up Zigpy app if radio lib
does not provide probing.
* Clean ZHA_GW_RADIO
* Don't import ZHA device settings.
* Update config flow tests.
* Filter out empty manufacturer.
* Replace port path with an by-id device name.
* Rebase cleanup
* Use correct mock.
* Make lint happy again
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use executor pool for IO
* Address comments.
Use AsyncMock from tests.
* Use core interface to test config flow.
* Use core interface to test config_flow.
* Address comments. Use core interface.
* Update ZHA dependencies.
* Schema guard
* Use async_update_entry for migration.
* Don't allow schema extra keys.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* split entity into base and entity
* add initial light group support
* add dispatching of groups to light
* added zha group object
* add group event listener
* add and remove group members
* get group by name
* fix rebase
* fix rebase
* use group_id for unique_id
* get entities from registry
* use group name
* update entity domain
* update zha storage to handle groups
* dispatch group entities
* update light group
* fix group remove and dispatch light group entities
* allow picking the domain for group entities
* beginning - auto determine entity domain
* move methods to helpers so they can be shared
* fix rebase
* remove double init groups... again
* cleanup startup
* use asyncio create task
* group entity discovery
* add logging and fix group name
* add logging and update group after probe if needed
* test add group via gateway
* add method to get group entity ids
* update storage
* test get group by name
* update storage on remove
* test group with single member
* add light group tests
* test some light group logic
* type hints
* fix tests and cleanup
* revert init changes except for create task
* remove group entity domain changing for now
* add missing import
* tricky code saving
* review comments
* clean up class defs
* cleanup
* fix rebase because I cant read
* make pylint happy
* Add ZHA core typing helper.
* Add aux_channels to ZHA rule matching.
* Add match rule claim_channels() method.
* Expose underlying zigpy device.
* Not sure we need this one.
* Move "base" channels.
* Framework for channel discovery.
* Make DEVICE_CLASS and REMOTE_DEVICE_TYPE default dicts.
* Remove attribute reporting configuration registry.
* Refactor channels.
- Refactor zha events
- Use compound IDs and unique_ids
- Refactor signal dispatching on attribute updates
* Use unique id compatible with entities unique ids.
* Refactor ZHA Entity registry.
Let match rule to check for the match.
* Refactor discovery to use new channels.
* Cleanup ZDO channel.
Remove unused zha store call.
* Handle channel configuration and initialization.
* Refactor ZHA Device to use new channels.
* Refactor ZHA Gateway to use new discovery framework.
Use hass.data for entity info intermediate store.
* Don't keep entities in hass.data.
* ZHA gateway new discovery framework.
* Refactor ZHA platform loading.
* Don't update ZHA entities, when restoring from zigpy.
* ZHA entity discover tests.
* Add AnalogInput sensor.
* Remove 0xFC02 based entity from Keen smart vents.
* Clean up IAS channels.
* Refactor entity restoration.
* Fix lumi.router entities name.
* Rename EndpointsChannel to ChannelPool.
* Make Channels.pools a list.
* Fix cover test.
* Fix FakeDevice class.
* Fix device actions.
* Fix channels typing.
* Revert update_before_add=False
* Refactor channel class matching.
* Use a helper function for adding entities.
* Make Pylint happy.
* Rebase cleanup.
* Update coverage for ZHA device type overrides.
* Use cluster_id for single output cluster registry.
* Remove ZHA typing from coverage.
* Fix tests.
* Address comments.
* Address comments.
* add dispatching of groups to light
* added ha device registry device id
* added zha group object
* add group event listener
* add and remove group members
* get group by name
* api cleanup
* clean up get device info
* create and remove zigpy groups
* clean up create and remove group api
* use device id
* use device id
* cleanup
* update test
* update tests to allow group events to flow
* add skeleton to retrieve zigbee groups
* get single group
* add a group
* return group members with group
* add comment
* fix group members
* add function to add device to group
* add group members
* add remove from group method
* add api to remove members from group
* add remove groups method
* clean up group add and remove
* fix remove group
* fix remove groups
* add api to get only groupable devices
* change var init
* add tests
* address review comment
* start test setup
test cleanup
test deps
update switch test
actually update test deps
cleanup and remove switch from coveragerc
comment
refactor to use fixtures and shared components
lint
* remove availability part that isn't in zha yet
* review comments and cleanup
* review comments
* add switch back unil post reorg merge
TheJulianJES
puddly
epenet
David F. Mulcahey
Alexei Chetroi
Ville Skyttä
Franck Nijhof
Paulus Schoutsen
J. Nick Koston
Robert Svensson
David F. Mulcahey