* Reapply "Add support for subentries to config entries" (#133470) (#136061)
* Reapply "Add support for subentries to config entries" (#133470)
This reverts commit ecb3bf79f3.
* Update test snapshot
* Add config subentry support to device registry (#128157)
* Add config subentry support to device registry
* Apply suggestions from code review
* Update syrupy serializer
* Update snapshots
* Address review comments
* Allow a device to be connected to no or a single subentry of a config entry
* Update snapshots
* Revert "Allow a device to be connected to no or a single subentry of a config entry"
This reverts commit ec6f613151cb4a806b7961033c004b71b76510c2.
* Update test snapshots
* Bump release version in comments
* Rename config_subentries to config_entries_subentries
* Add config subentry support to entity registry (#128155)
* Add config subentry support to entity registry
* Update syrupy serializer
* Update snapshots
* Update snapshots
* Accept suggested changes
* Clean registries when removing subentry (#136671)
* Clean up registries when removing subentry
* Update tests
* Clean up subentries from deleted devices when removing config entry (#136669)
* Clean up subentries from deleted devices when removing config entry
* Move
* Add config subentry support to entity platform (#128161)
* Add config subentry support to entity platform
* Rename subentry_id to config_subentry_id
* Store subentry type in subentry (#136687)
* Add reconfigure support to config subentries (#133353)
* Add reconfigure support to config subentries
* Update test
* Minor adjustment
* Rename supported_subentry_flows to supported_subentry_types
* Address review comments
* Add subentry support to kitchen sink (#136755)
* Add subentry support to kitchen sink
* Add subentry reconfigure support to kitchen_sink
* Update kitchen_sink tests with subentry type stored in config entry
* Update kitchen_sink
* Update kitchen_sink
* Adjust kitchen sink tests
* Fix hassfest
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Improve docstrings and strings.json
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Ensure config_flow abort reasons have translations
* Ignore fake_integration in application_credentials
* Mark gardena_bluetooth as needs fixing
* Mark google as needs fixing
* Mark google_assistant_sdk as needs fixing
* Mark homewizard as needs fixing
* Mark homeworks as needs fixing
* Mark honeywell as needs fixing
* Mark jewish_calendar as needs fixing
* Mark lg_netcast as needs fixing
* Mark lifx as needs fixing
* Mark lyric as needs fixing
* Mark madvr as needs fixing
* Mark matter as needs fixing
* Mark melcloud as needs fixing
* Mark motioneye as needs fixing
* Mark ollama as needs fixing
* Mark philips_js as needs fixing
* Mark spotify as needs fixing
* Mark srp_energy as needs fixing
* Mark subaru as needs fixing
* Mark tplink as needs fixing
* Mark yolink as needs fixing
* Mark youtube as needs fixing
* Fix incorrect comment
* Index config entry discovery_keys by discovery domain
* Add new signal
* Update tests
* Update homeassistant/config_entries.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix imports
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* Reinitialize zeroconf discovery flow on unignore
* Adjust tests
* Improve comments
* Fix logic for updating discovery keys
* Add tests
* Use mock_config_flow helper in new config_entries test
* Add discovery_keys attribute to ConfigEntry
* Update zeroconf rediscovery
* Change type of ConfigEntry.discovery_keys
* Update tests
* Fix DiscoveryKey.from_json_dict and add tests
* Fix test
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* Adding initial setup
* Update homeassistant/components/melcloud/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Adding ConfigEntryNotReady exception
* Update homeassistant/components/melcloud/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/melcloud/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/melcloud/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Placing exception handling in setup_entry
* Expanding test cases
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add MELCloud integration
* Provides a climate and sensor platforms. Multiple platforms on one go
is not the best option, but it does not make sense to remove them and
commit them later either.
* Email and access token are stored to the ConfigEntry. The token can be
updated by adding the integration again with the same email address. The
config flow is aborted and the update is performed on the background.
* Run isort
* Fix pylint errors
* Run black
* Increase coverage
* Update pymelcloud dependency
* Add HVAC_MODE_OFF emulation
* Remove print
* Update pymelcloud to enable device type filtering
* Collapse except blocks and chain ClientNotReadys
* Add preliminary documentation URL
* Use list comp for creating model info
Filters out empty model names form units.
* f-string galore
Dropped 'HVAC' from AtaDevice name template.
* Delegate fan mode mapping to pymelcloud
* Fix type annotation
* Access AtaDevice through self._device
* Prefer list comprehension
* Update pymelcloud to leverage device type grouping
The updated backend lib returns devices in a dict grouped by the device
type. The devices do not necessarily need to be in a single list and
this way isinstance is not required to extract devices by type.
* Remove DOMAIN presence check
This does not seem to make much sense after all.
* Fix async_setup_entry
Entry setup used half-baked naming from few experimentations back.
The naming conventiens were unified to match the platforms.
A redundant noneness check was also removed after evaluating the
possible return values from the backend lib.
* Simplify empty model name check
* Improve config validation
* Use config_validation strings.
* Add CONF_EMAIL to config schema. The value is not strictly required
when configuring through configuration.yaml, but having it there makes
things more consistent.
* Use dict[key] to access required properties.
* Add DOMAIN in config check back to async_setup. This is required if an
integration is configured throught config_flow.
* Remove unused manifest properties
* Remove redundant ClimateDevice property override
* Add __init__.py to coverage exclusion
* Use CONF_USERNAME instead of CONF_EMAIL
* Use asyncio.gather instead of asyncio.wait
* Misc fixes
* any -> Any
* Better names for dict iterations
* Proper dict access with mandatory/known keys
* Remove unused 'name' argument
* Remove unnecessary platform info from unique_ids
* Remove redundant methods from climate platform
* Remove redundant default value from dict get
* Update ConfigFlow sub-classing
* Define sensors in a dict instead of a list
* Use _abort_if_unique_id_configured to update token
* Fix them tests
* Remove current state guards
* Fix that gather call
* Implement sensor definitions without str manipulation
* Use relative intra-package imports
* Update homeassistant/components/melcloud/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Erik Montnemery
epenet
Robert Resch
Erwin Douna
Joost Lekkerkerker
Marc Mueller
Jan Bouwhuis
G Johansson
Franck Nijhof
Ville Skyttä
Daniel Hjelseth Høyer
Vilppu Vuorinen
Paulus Schoutsen
Chris Talkington
springstan