7d24ae88e6
Mark Unifi bandwidth sensors as unavailable when client disconnects ( #109812 )
...
* Set sensor as unavailable instead of resetting value to 0 on disconnect
* Update unit test on unavailable bandwidth sensor
2024-02-06 18:33:10 +01:00
8b0c9d3d18
Use builtin TimeoutError [t-z] ( #109683 )
2024-02-05 12:20:36 +01:00
f1392f8519
Try to reconnect to UniFi on 403 ( #109067 )
2024-01-29 21:39:15 +01:00
fb62b6f01e
Fix unifi test_tracked_clients test ( #108638 )
...
Fix unifi test_tracked_clients client
This test relied on the sensor platform getting set up and creating
the device before the device_tracker platform was setup since the
device_tracker platform will disable the entity because there is
not matching device entry for it via
4ee6735cbb/homeassistant/components/device_tracker/config_entry.py (L336)
2024-01-22 08:35:24 +01:00
d94421e1a4
Reset UniFi bandwidth sensor when client misses heartbeat ( #104522 )
...
* Reset UniFi bandwidth sensor when client misses heartbeat
* Fix initialization sequence
* Code simplification: remove heartbeat_timedelta, unique_id and tracker logic
* Add unit tests
* Remove unused _is_connected attribute
* Remove redundant async_initiate_state
* Make is_connected_fn optional, heartbeat detection will only happen if not None
* Add checks on is_connected_fn
2024-01-14 15:19:43 +01:00
1271f16385
Add Unifi device state for additional diagnostics ( #105138 )
...
* Add device state for additional diagnostics
* Add state test and fix existing tests
* Utilize IntEnum and dict for state lookup
* Update aiounifi to v68
2023-12-16 08:38:21 +01:00
6908497c3d
Add minor version to config entries ( #105479 )
2023-12-12 08:44:35 +01:00
b5785003a3
Migrate unifi tests to use freezegun ( #105343 )
2023-12-09 12:55:40 +01:00
6271fe333d
Rework some UniFi unique IDs ( #104390 )
2023-11-24 11:18:55 +01:00
d78c0bd948
Handle 403 errors in UniFi ( #104387 )
...
UniFi handle 403 error
2023-11-23 20:25:26 +01:00
edf18df0e6
Add PoE power cycle button to UniFi integration ( #104332 )
2023-11-22 07:02:49 +01:00
f1fd8a0d2b
Bump aiounifi to v66 ( #104336 )
2023-11-22 07:02:13 +01:00
40817dabbf
Bump aiounifi to v64 ( #102700 )
2023-10-24 20:27:42 -05:00
721c45b7a3
Rework UniFi client configuration ( #99483 )
2023-10-22 23:39:54 +02:00
b79eae2e94
Update Unifi bandwidth sensors ( #101598 )
...
* Change bandwidth sensors device class, state class, unit of measurement, icon
* Reformat imports
* Reformat imports
* Revert suggested_unit_of_measurement. Add unit tests.
2023-10-22 17:14:49 +02:00
01b5854968
Rework UniFi websocket ( #100614 )
...
* Rework websocket management
* remove unnecessary fixture
* Remove controller from mock_unifi_websocket
* Mock api.login in reconnect method
* Remove unnecessary edits
* Minor clean up
* Bump aiounifi to v63
* Wait on task cancellation
2023-09-27 10:56:24 +02:00
7b00265cfe
Remove legacy UniFi PoE client clean up ( #100318 )
2023-09-13 20:14:03 +02:00
d8445a79fc
UniFi streamline loading platforms ( #100071 )
...
* Streamline loading platforms
* Move platform registration logic to UnifiController class
2023-09-11 15:55:27 +02:00
cf47a6c515
Add UniFi device uptime and temperature sensors ( #99307 )
...
* Add UniFi device uptime and temperature sensors
* Add native_unit_of_measurement to temperature
Remove seconds and milliseconds from device uptime
2023-09-09 11:12:44 +02:00
b0e40d95ad
Bump aiounifi to v61 ( #99686 )
...
* Bump aiounifi to v61
* Alter a test to cover the upstream change
2023-09-05 21:13:28 +02:00
80d2309896
Switch async_track_time_interval to use async_call_later internally ( #99220 )
2023-08-28 13:56:22 -05:00
5e5193eeb5
Rework UniFi Network Controller device and add software version ( #99136 )
...
Rework Network Controller device and add software version
2023-08-27 17:07:38 +02:00
71bf782b22
Improve UniFi PoE control by queueing commands together ( #99114 )
...
* Working draft without timer
* Clean up
Improve tests
* Use async_call_later
2023-08-27 16:58:48 +02:00
45efe29262
Bump aiounifi to v58 ( #99103 )
2023-08-26 18:27:45 -05:00
72e6f79086
Replace remaining utcnow calls + add ruff check ( #97964 )
2023-08-25 03:23:43 +02:00
d0d160f11c
Unifi add port forward control to switch platform ( #98309 )
2023-08-21 22:01:44 +02:00
9e42451934
UniFi refactor using site data ( #98549 )
...
* Clean up
* Simplify admin verification
* Streamline using sites in config_flow
* Bump aiounifi
2023-08-18 22:44:59 +02:00
5b6a7edd8d
Add Unifi outlet switches for PDU devices ( #98320 )
...
Updates the Unifi outlet switching feature to support PDU devices
2023-08-13 20:06:12 +02:00
87753bdb82
Add UniFi power stats for PDU overall AC outlet metrics ( #98217 )
2023-08-12 18:12:59 +02:00
fe1f617a35
Add unifi power stats for PDU outlets ( #98081 )
...
Adds support for power stats for PDU outlets.
2023-08-10 18:25:03 +02:00
05ac67eba2
Adjust unifi tests which create devices ( #98211 )
2023-08-10 18:24:42 +02:00
868a5f377f
Ruff: isort don't split imports based on trailing comma ( #98162 )
2023-08-10 14:27:03 +02:00
02c27d8ad2
UniFi WLAN availability affected by WLAN enabled ( #98020 )
2023-08-09 18:52:35 +02:00
e43ad1c6a0
Add restart device to UniFi button platform ( #97642 )
...
* Add restart device to UniFi Button platform
* Add tests for button platform
* Small corrections
2023-08-05 20:07:20 +02:00
66cb407e4f
Improve counting of UniFi WLAN Clients sensor ( #97785 )
2023-08-04 19:22:46 +02:00
89069bb9b8
Add WLAN clients reporting to UniFi Sensor platform ( #97234 )
2023-07-26 08:00:17 +02:00
8d6c4e3306
Add controls to enable and disable a UniFi WLAN ( #97204 )
2023-07-25 14:01:57 +02:00
06f97679ee
Add WLAN QR code support to UniFi Image platform ( #97171 )
2023-07-25 10:11:48 +02:00
fbbdebee47
Correct unifi device info ( #96483 )
2023-07-13 12:14:31 -04:00
1ce74ba25c
Import `util.dt` as `dt_util` in `components/[t-z]*` ( #93763 )
2023-05-29 23:00:43 +02:00
09109d093e
Allow UniFi control PoE passthrough properly ( #92028 )
2023-04-26 09:16:18 +02:00
0d7711f787
Fix UniFi client tracker host_name missing ( #91188 )
2023-04-11 11:56:55 +02:00
7b3a932cd9
Remove incorrect constant usage in test ( #91198 )
2023-04-11 10:00:17 +02:00
d539bddabc
Correct handling if WIFI combine suffix is "None" ( #90528 )
...
* Correct handling of "None" WIFI combine suffix
* Update tests/components/unifi/test_config_flow.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Update tests/components/unifi/test_config_flow.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
---------
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
2023-04-03 09:47:08 +02:00
69a46d4002
Adjust pylint plugin for components fixtures ( #90217 )
...
* Adjust pylint plugin for components fixtures
* Adjust components
* Use MagicMock
* Adjust
* Use None
2023-03-26 15:21:19 +02:00
ee74e21541
Rework UniFi wireless client "wired bug" logic ( #89757 )
2023-03-24 10:06:09 +01:00
8564768d9e
UniFi library controls add/update signalling ( #89525 )
...
* Library controls add/update signalling
* Remove add/remove signalling
* Remove unifi_entity_base and unifi_client to make mypy pass
2023-03-11 20:14:39 +01:00
288a4203ab
Make client tracker use common UniFi entity class ( #84942 )
...
* Make client tracker use common UniFi entity class
* Fix tests
* Fix mypy
* Remove legacy data
* Fix comment: skip else use return
* Minor change
* Remove missed stuff from previous rebase
* Import async_device_available_fn from entities.py rather than specifying it in device_tracker
* Avoid using asserts
* Keep explicit parenthesis for readability
* Allow loading entities on option changes
2023-03-11 06:23:49 +01:00
9ff45ca013
Allow loading UniFi entities on config options change ( #88762 )
...
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2023-03-06 16:08:14 +01:00
9a5f88f55f
Add type hints to integration tests (part 23) ( #88235 )
2023-02-17 16:40:46 +01:00
wittypluck
Marc Mueller
Robert Svensson
J. Nick Koston
Joseph Block
Erik Montnemery
Jan-Philipp Benecke
Chris
Franck Nijhof
Ville Skyttä
epenet
Nerdix