* Media playback working
* Working on OPUS audio
* Before rollback
* Fix is_end
* First working pipeline
* Clean up
* Remove asserts
* Send HA version in SDP
* Use async_pipeline_from_audio_stream
* Use config flow with allowed IP
* Satisfy ruff
* Remove use of regex for SIP IP
* Use voip-utils
* Fix imports
* Add Pipeline to __all__
* Fix voice assistant tests
* Basic VoIP test
* Run hassfest
* Generate requirements
* Bump voip utils (missing requirement)
* Allow tts_options to be passed in to pipeline run
* Add config flow tests
* Update test snapshots
* More tests
* Remove get_extra_info
* Appeasing the codebot
* Android TV Remote integration
* Add diagnostics
* Remove test pem files from when api was not mocked
* Address review comments
* Remove hass.data call in test
* Store the certificate and key in /config/.storage
* update comments
* Update homeassistant/components/androidtv_remote/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* import callback
* use async_generate_cert_if_missing
---------
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Initial commit
* Add websocket test tool
* Small tweak
* Tiny cleanup
* Make pipeline work with frontend branch
* Add some more info to start event
* Fixes
* First voice assistant tests
* Remove run_task
* Clean up for PR
* Add config_flow.py
* Remove CLI tool
* Simplify by removing stt/tts for now
* Clean up and fix tests
* More clean up and API changes
* Add quality_scale
* Remove data from run-finish
* Use StrEnum backport
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* TP-Link Omada integration
Support for PoE config of network switch ports
* Bump omada client version
* Fixing tests
* Refactored site config flow
* Code review comments
* Fixed tests and device display name issue
* Bump isort to fix pre-commit hooks
* Hassfest for the win
* Omada code review
* Black
* More config flow test coverage
* Full coverage for omada config_flow
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Add Thread integration
* Add get/set operational dataset as TLVS
* Add create operational dataset
* Add set thread state
* Adjust after rebase
* Improve HTTP status handling
* Improve test coverage
* Change domains from thread to otbr
* Setup otbr from a config entry
* Add files
* Store URL in config entry data
* Make sure manifest is not sorted
* Remove useless async
* Call the JSON parser more
* Don't raise exceptions without messages
* Remove stuff which will be needed in the future
* Remove more future stuff
* Use API library
* Bump library to 1.0.1
* redo Add sensor
* move back to ClientError
simplify washer_state
* Cleanup Sensor definitions
* Seperated EndTimeSensor
* Clean up WasherDryerTimeClass
* Start with Timestamp = None
* Clean up class description
* One more ClientError
* change to restore sensor
* Don't update when no state change
* Seperate washer tests
Add restore_state test
* Remove unused loop in washer sensor test
* No loops in sensor tests
* Remove unnecessary SensorTestInstance
* Added support for SwitchBot Lock
* Updated PySwitchbot to 0.32.1
* Updated .coveragerc
* Removed unnecessary condition
* Using library method to verify encryption key
* Added config flow tests
* Remove link from config flow description
* Added one more test for config flow
* Updated CODEOWNERS
* Bump pyrainbird to 0.7.0 and move to async library
* Share updates across sensors
* Fix test version and delete dead code
* Add test coverage for yaml configuration
* Address PR feedback
* Copy google_sheets to google_assistant_sdk
This is to improve diff of the next commit with the actual implementation.
Commands used:
cp -r homeassistant/components/google_sheets/ homeassistant/components/google_assistant_sdk/
cp -r tests/components/google_sheets/ tests/components/google_assistant_sdk/
find homeassistant/components/google_assistant_sdk/ tests/components/google_assistant_sdk/ -type f | xargs sed -i \
-e 's@google_sheets@google_assistant_sdk@g' \
-e 's@Google Sheets@Google Assistant SDK@g' \
-e 's@tkdrob@tronikos@g'
* Google Assistant SDK integration
Allows sending commands and broadcast messages to Google Assistant.
* Remove unnecessary async_entry_has_scopes check
* Bump gassist-text to fix protobuf dependency
* Add matter base (#79372)
Co-authored-by: Marcel van der Veldt <m.vanderveldt@outlook.com>
* Add matter server add-on flow (#82698)
* Add matter server add-on flow
* Fix stale error argument
* Clean docstrings
* Use localhost as default address
* Add matter websocket api foundation (#82848)
* Add matter config entry add-on management (#82865)
* Use matter refactored server/client library (#83003)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump python-matter-server to 1.0.6 (#83059)
* Extend matter websocket api (#82948)
* Extend matter websocket api
* Finish docstring
* Fix pin type
* Adjust api after new client
* Adjust api to frontend for now
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Added initial files for air-Q integration
* Allow FIXME comments in pylint (temporary)
Also reintroduce --ignore-missing-annotations=y
* Set up air-q entry to connect to aioairq's API (initial attempt)
Also add necessary constants
* Implement a class for sensors and its update logic
Very early stage, WIP
* Zeroconf and authentication are working
* Complete the bare-bone minimal working version
Specifically, make AirQSensor update its values.
* Handle invalid authentication gracefully
* Handle ClientConnectionError gracefully
* Add field hint for the login form
The key in the schema, which defines the form in
`ConfigFlow.async_show_form` is looked up in both `airq/strings/json`
and `airq/translations/en.json`. I am still not 100% sure how this
lookup is performed. WIP
* Minor cleanups
* Extend sensor list to all supported by SensorDeviceClass
Also manage warming up sensors
* aioairq is published to PyPI and mentioned in requirements
* Reordered constants and list content alphabetically
As required by style guides. Also turned SENSOR_TYPES to a list
* Updated file docstrings for a dev unfamiliar w/homeassistant like myself
* Adding a bit of logging for the integration setup process
* Expose scan interval & smoothing flag
Also streamline test_authentication in config_flow.
* Fix a type annotation mistake
* Use as many constants from homeassistant.const as possible
My only concern is using CONST_IP_ADDRESS = "ip_address" for smth which
stands for both IP address and mDNS...
* Temporarily rollback ConfigFlow.async_step_configure and use defaults
TODO: implement OptionFlowHandler instead
* Define custom Coordinator, w subset of airq config
The latter is then accessed from entity / sensor constructors to define
correct DeviceInfo
* Provide translations to de & fr + minor changes to en
* Provide translations to ru + a minor en changes
* Make translation a little more helpful and polite
* Fix devicename and entry title
* Remove stale commented out code
* Test config_flow
At this point two helper functions which interact with the external
library are not tested
* Clean up unrelated and meant as temporary changes
* Clean up unnecessary comments meant for internal use
* Move fetching config to a dedicated async coordinator method
As opposed to it being a potentially poorly justified step in
async_setup_entry
* Remove zeroconf support since it is not yet ready
* Remove translations other than en
* Remove unnecessary comments, manifest.json entries, and constants
* Improve exception handling
- `_LOGGER` uses `debug` and not `error` levels.
- Drop `ClientConnect` and catch `aiohttop.ClientConnectError` directly
- Drop `Exception` as it is not expected from `aioairq` (remove the
corresponding test too)
* Drop strings for obsolete errors and steps
Specifically, `unknown` error isn't caught any more. `configure` step
has also been removed.
* Refactor en.json to be consistent with strings.json
* Move target_route from a coordinator argument to a constant
At this point a user cannot configure the target_route route, thus it
does not make sense to expose it half-heartedly in
`AirQCoordinator.__init__`, since it cannot be accessed.
* Fix an async call in `AirQCoordinator.async_setup_entry`
* Refactor underlying aioairq API
- Use `homeassistant.helpers.aiohttp.async_get_clientsession` and pass a
single persistent session to `aioariq.AirQ.__init__`
- `aioairq.AirQ.fetch_device_info` now returns a `DeviceInfo` object heavily
inspired and almost compatible with `homeassistant.helpers.entity.DeviceInfo`.
Make heavier use of this object and define a single `DeviceInfo` in the
`AirQCoordinator` (instead of recreating the same object for each sensor
of the device in `sensor.AirQSensor`)
- Drop two helper functions in `config_flow.py` and operate on `aioariq.AirQ`
methods directly
* Fix the version of aioairq
* Add 15 more sensors + icons
* Remove cnt* & TypPS, change units of health & performance
* Add 12 more sensors
* Add a missing icon
* Gracefully handle device not being available on setup
If the device and the host are not on the same WiFi,
ServerTimeoutError is raised, which is caught by
ClientConnectionError.
If the device is powered off, ClientConnectionError is expected.
In both cases, ConfigEntryNotReady is raised, as prescribed by the docs.
Newer version of aioairq times-out far quicker than the default 5 mins.
* Rename two sensors
* Validate provided IP address / mDNS
aioairq now raises InvalidInput if provided IP / mDNS does not seem
valid. Handle this exception correctly
* Apply suggestions from code review
Clean up the comments and rename the logger
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during the first refresh
- Fetched info is stored in AirQCoordinator.device_info.
- In `AirQSensor.native_value` only multiply by the factor if
the sensor reading is not None
- Fix the tests for ConfigFlow for aioairq==0.2.3. Specifically
make the dummy data pass the new validation step upstream
+ add a test which fails it
* Drop custom device classes for now
* Apply suggestions from code review
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during ConfigFlow.async_step_user
Store the result obtained by `airq.fetch_device_info` it in
`config_entry.data`. Pass the entire config entry to `AirQCoordinator`
and build the entire `homeassistant.helpers.entity.DeviceInfo` in the
`AirQCoordinator.__init__`. This makes
`AirQCoordinator._async_fetch_device_info` and overloaded
`AirQCoordinator._async_config_entry_first_refresh` obsolete.
Bump aioairq version.
Turn update_interval from `AirQCoordinator.__init__` argument into a
contestant.
* Custom entity description exposing a hook to modify sensor value
Use a `AirQEntityDescription` with a callable `value_fn` which allows to
change the sensor value retrieved from the device. Note that the
callable does not handle data retrieval itself (even from
`coordinator.data`). Instead it is purely a hook to transform obtained
value.
* Avoid duplicated use of unique_id
Device info is fetched during the `ConfigFlow.async_user_step`.
`unique_id` is taken from the device info and is **not** stored
in `config_entry.data`. Subsequently `config_entry.unique_id` is
used instead.
* Drop unnecessary try-except
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Clarify the use of value_transform_fn
* Refactor the use of lambdas in AirQEntityDescription
Now it is the job of the callable under `value` to get the sensor
reading from the coordinator's data. Factoring this functionality into a
callback decouples the key of the description from the key of dict,
returned by the API, so `AirQEntityDescription` no longer requires its key
to be set to smth clearly internal (e.g. `nh3_MR100`).
* Use a callback to update native_value
Since all `native_value`s are updated synchronously, it can as well be
done in a callback for better state consistency (right?)
* Revert the description keys to match data keys
Must match given the current way of identifying available sensors. On a
broader scale, they must match to be able to relate the descriptions to
sensors, unless a separate lookup table is maintained.
* Reduce number of loops when adding sensors
Filtering warming up sensors and non-sensor keys can be combined with
adding entities.
* Remove obsolete imports
* Update integrations.json
* Add integration_type
Integration supports multiple devices => hub
Co-authored-by: dl2080 <daniel.lehmann@runbox.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
Co-authored-by: Daniel Lehmann <43613560+dl2080@users.noreply.github.com>
Co-authored-by: Martin Selbmann <job@martin-selbmann.de>
* mapping
* update
* working
* tests
* fixes
* temp add binary sensor platform to make sure it works
* fixes
* 100% cover
* adjust
* disable chatty sensors by default
* remove binary sensor_platform for next PR
* time is much nicer than counter
Jan Čermák
dougiteixeira
Erik Montnemery
G Johansson
Michael Hansen
Avi Miller
tronikos
Hans Oischinger
Martin Hjelmare
epenet
andarotajo
luar123
Chris Xiao
Michael
Niels Perfors
Thijs W
Mark Adkins
Felix Rotthowe
Emory Penney
Thomas Dietrich
David Bonnes
Chris Straffon
Thomas Hollstegge
Marc-Olivier Arsenault
MarkGodwin
Nathan Spencer
Klaas Schoute
On Freund
J. Nick Koston
Paulus Schoutsen
Franck Nijhof
Dan Simpson
Luke
fwestenberg
mkmer
Brandon Rothweiler
Shay Levy
Robert Hillis
Rami Mosleh
Poltorak Serguei
Jack Boswell
mkmer
930913
Aarni Koskela
Koen van Zuijlen
starkillerOG
Lukas Barth
Damian Sypniewski
PierreAronnax
Allen Porter
Aaron Bach
Nyro
Sean Chen
Marcel van der Veldt
Jan Bouwhuis
north3221
Raman Gupta
cdheiser
Jon Gilmore
StefanIacobLivisi
tstabrawa
Renat Sibgatulin
aschmitz
Daniel Gangl
mtdcr