* Updated precision to follow the tenths, halves, whole notation used by
other home assistant climate modules. Added the precision @property so
that home assistant can handle this rounding in the frontend, rather
than in the _async_read_register() method.
* Fixed a pylinter error for periods in user-facing log messages, and
updated `precision` defaults in components/modbus/__init__.py to be
consistent with an error case, using `PRECISION_WHOLE`.
* revert changes to `precision:` configuration variable
instead, the climate `precision()` function will infer whether or not
to display in whole or tenths. halves will be unsupported, which should
be fine.
* re-added missing line that was removed
* revert change to use self._input_type instead of CALL_TYPE_REGISTER_HOLDING
* Rename _update() to update()
A platform neeed a function update(), even though
polling is false, this is due to the service:
homeassistant.update_entity, which calls update()
* Update test harnesss to script testing.
Test homeassistant.update_entity in all platforms.
This call calls update() in the platform to get
a new reading.
* Add reuse parameter.
* Move service call from helper to tests.
* Change run_service_update --> prepare_service_update.
* Remove entity_id parameter.
* Reuse HA constants for serial configuration.
Reusing HA consts reduces the need for translation.
Sort/group constants in const.
* Change const name ATTR_* to CONF_*
* Correct wrong import
* ATTR_* for service and CONF_* for schemas.
* Revert change to service call.
* Rename CONF_TEMPERATURE -> ATTR_TEMPERATURE
Avoid possible division problem in set_temperature.
* Change modbus configuration to new style.
The old (frozen) configuration is still supported, but when detected a big
warning is issued that it will soon be removed. This allows users to change
their configuration at their pace.
Clean configuration SCHEMAs and move common modbus parts
to MODBUS_SCHEMA (renamed from BASE_SCHEMA).
Add BASE_COMPONENT_SCHEMA to ensure common configuration of components.
All component define e.g. NAME, move these to a common schema.
change components (binary_sensor, sensor, switch) to new config
Add test set for modbus itself (old config and discovery_info).
Add test of devices discovery_info configuration
* Update discovery_info configuration for binary_sensor.
* Update discovery_info configuration for sensor.
* Update discovery_info configuration for switch.
* Review comments.
* update due to change in core
* flake8 problem.
* Correct log message.
* add should_poll property.
* Fix polling for Modbus binary sensor
* Fix polling for Modbus sensor
* Fix polling for Modbus switch
* Fix switch.
* Fix pytest errors.
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/modbus.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ToogleEntity -> SwitchEntity and add abastract
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/modbus/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* removed if/else in test.
* Remove other if.
Co-authored-by: Vladimir Zahradnik <vladimir@zahradnik.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Rollback modbus to version 0.107.7
Update manifest to not use async.
Rollback entities to sync version.
Keep newer modifications apart from async.
Rollback __init__ to sync version but keep the new functionality.
add async sub directory
Adding the current (not working) version in a sub directory,
to allow easy sharing with a few alfa testers.
The async version are to be updated to use the serial/tcp already
available instead of the flaky pymodbus version. pymodbus is still
needed to encode/decode the messagess.
Update test cases to reflect sync implementation, but
keep the new functionality like e.g. conftest.py.
* do not publish async version
The async version will be made available in a forked repo, until
it is ready to replace the production code.
* update common test for modbus integration
* remove log messages from modbus setup function.
* Make global method local
* Change parameter name to snake_case
* modbus: bumb pymodbus version to 2.3.0
pymodbus version 1.5.2 did not support asyncio, and in general
the async handling have been improved a lot in version 2.3.0.
updated core/requirement*txt
* updated core/CODEOWNERS
committing result of 'python3 -m script.hassfest'.
* modbus: change core connection to async
change setup() --> async_setup and update() --> async_update()
Use async_setup_platform() to complete the async connection to core.
listen for EVENT_HOMEASSISTANT_START happens in async_setup()
so it needs to be async_listen.
But listen for EVENT_HOMEASSISTANT_STOP happens in start_modbus()
which is a sync. function so it continues to be listen().
* modbus: move setup of pymodbus into modbushub
setup of pymodbus is logically connected to the class modbushub,
therefore move it into the class.
Delay construction of pymodbus client until event
EVENT_HOMEASSISTANT_START arrives.
* modbus: use pymodbus async library
convert pymodbus calls to refer to the async library.
Remark: connect() is no longer needed, it is done when constructing
the client. There are also automatic reconnect.
* modbus: use async update for read/write
Use async functions for read/write from pymodbus.
change thread.Lock() to asyncio.Lock()
* Modbus: patch for slow tcp equipment
When connecting, via Modbus-TCP, so some equipment (like the
huawei sun2000 inverter), they need time to prepare the protocol.
Solution is to add a asyncio.sleep(x) after the connect() and before
sending the first message.
Add optional parameter "delay" to Modbus configuration.
Default is 0, which means do not execute asyncio.sleep().
* Modbus: silence pylint false positive
pylint does not accept that a class construction __new__
can return a tuple.
* Modbus: move constants to const.py
Create const.py with constants only used in
the modbus integration.
Duplicate entries are removed, but NOT any entry that would
lead to a configuration change.
Some entries were the same but with different names, in this
case renaming is done.
Also correct the tests.
* Modbus: move connection error handling to ModbusHub
Connection error handling depends on the hub, not the
entity, therefore it is logical to have the handling in
ModbusHub.
All pymodbus call are added to 2 generic functions (read/write)
in order not to duplicate the error handling code.
Added property "available" to signal if the hub is connected.
* Modbus: CI cleanup
Solve CI problems.
* Modbus: remove close of client
close() no longer exist in the pymodbus library, use
del client instead.
* Modbus: correct review comments
Adjust code based on review comments.
* Modbus: remove twister dependency
Pymodbus in asyncio mode do not use twister but still throws a
warning if twister is not installed, this warning goes into
homeassistant.log and can thus cause confusion among users.
However installing twister just to avoid the warning is not
the best solution, therefore removing dependency on twister.
* Modbus: review, remove comments.
remove commented out code.
* Use f-strings in integrations starting with "M"
* Format mqtt light init with black
* Fix lint error
* Fix pylint error
* Restore constants
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Update homeassistant/components/mqtt/discovery.py
* Format with Black
* modbus: support multiple modbus hub
* update data after entities added
* pass hub object to each entity. and save hub to hass.data but not in module level
* add hub_client setup log
* don't update when adding device, because hub_client is not ready right now
* support restore last state
* remove useless func
* compatible with python35
* removed unrelated style changes
* Update flexit for multi-device modbus
* change how hubs are referenced in the configuration
* Also update climate/modbus.py
* Remove unwanted whitescapce
* Defined common constants centrally
* Update DOMAIN in climate and switch components
* Removed unnecessary vol.schema
* Make hub name optional
* Add name property to ModbusHub
jan iversen
Franck Nijhof
Lincoln Kirchoff
Maciej Bieniek
jan iversen
Pim
Marc Mueller
tkdrob
Vladimír Záhradník
Erik Montnemery
jan iversen
springstan
Adam Cheng
Franck Nijhof
Paulus Schoutsen
Pascal Vizeli
cgtobi
Paulus Schoutsen
Fabian Affolter
Joakim Plate
Ben Van Mechelen