* Activate startup delay.
* Add removal of call_later if HA is stopped.
This is unlikely to happen, but just security measure.
* Removing timing interval.
async_fire_time_changed() needs to be called twice, first time the delay is
ended and second time update() is executed.
* Variable naming.
* Rename _update() to update()
A platform neeed a function update(), even though
polling is false, this is due to the service:
homeassistant.update_entity, which calls update()
* Update test harnesss to script testing.
Test homeassistant.update_entity in all platforms.
This call calls update() in the platform to get
a new reading.
* Add reuse parameter.
* Move service call from helper to tests.
* Change run_service_update --> prepare_service_update.
* Remove entity_id parameter.
Remove old style configuration from switch.
- The old style configuration allowed a number of illegal
configurations, instead of adding if...log. in setup we
only support the new configuration style.
Add new/changed configuration switch.
Removed verify_state and cleaned configuration to avoid possible
illegal configurations.
Changing the timeout from package default, secures SENDING will
timeout, and after 3 retries break off.
Remark: this commit is tested with pymodbus v2.5.1 the old version
v2.3.0 have several problems in this area.
self._value = await self.async_get_last_state()
pymodbus v2.5.1 is active on DEV (bumped in an earlier PR).
* Add missing function in class.
write_coils was missing.
* Remove dead code.
The HA configuration secures that CONF_TYPE only contains legal values,
so having an empty assert to catch unknown values is dead code.
An empty assert is not informative.
* Reuse HA constants for serial configuration.
Reusing HA consts reduces the need for translation.
Sort/group constants in const.
* Change const name ATTR_* to CONF_*
* Correct wrong import
* ATTR_* for service and CONF_* for schemas.
* Revert change to service call.
* Rename CONF_TEMPERATURE -> ATTR_TEMPERATURE
Avoid possible division problem in set_temperature.
* WRITE_COIL uses write_coils in case of an array.
WRITE_REGISTER uses write_register/write_registers depending
on whether value is singular or an array.
WRITE_COIL is modified to be similar and uses
write_coil/write_coils depending on whether value is singular or an
array.
* Update SERVICE_WRITE_COIL to allow list.
* Change modbus configuration to new style.
The old (frozen) configuration is still supported, but when detected a big
warning is issued that it will soon be removed. This allows users to change
their configuration at their pace.
Clean configuration SCHEMAs and move common modbus parts
to MODBUS_SCHEMA (renamed from BASE_SCHEMA).
Add BASE_COMPONENT_SCHEMA to ensure common configuration of components.
All component define e.g. NAME, move these to a common schema.
change components (binary_sensor, sensor, switch) to new config
Add test set for modbus itself (old config and discovery_info).
Add test of devices discovery_info configuration
* Update discovery_info configuration for binary_sensor.
* Update discovery_info configuration for sensor.
* Update discovery_info configuration for switch.
* Review comments.
* update due to change in core
* flake8 problem.
* Correct log message.
* add should_poll property.
* Fix polling for Modbus binary sensor
* Fix polling for Modbus sensor
* Fix polling for Modbus switch
* Fix switch.
* Fix pytest errors.
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/modbus.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ToogleEntity -> SwitchEntity and add abastract
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/modbus/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* removed if/else in test.
* Remove other if.
Co-authored-by: Vladimir Zahradnik <vladimir@zahradnik.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add Modbus light and fan entities
* Rework Fan and Light components to new config structure
* Fix Linter issue
* Rework Modbus switch initialization
* Properly update state on actuator methods
* Remove Fan and Light entity from this change. They will be merged separately
* Fix loading of the Switch platform
* Modbus switch - inherit from the SwitchEntity
* Add Modbus cover
* Fix improper commands written for Modbus cover via coil
* Make changes per review comments
* Fix default hub not defined
Since support for multiple hubs was added, the default hub option
was not implemented correctly. Now I added necessary logic to make
it work. First hub in a list will be used as a default hub.
* Move Cover config under Modbus section
* Revert setting up a default hub alias
* Make hub mandatory for Cover
* Add default scan interval
* Read scan_interval from discovery info
* Fix linter error
* Use default scan interval from Cover platform
* Handle polling for Modbus cover directly inside entity
* Move covers under hub config
* Fix for review comment
* Call update() from Cover actuator methods
* Fix time validation
jan iversen
tkdrob
jan iversen
Vladimír Záhradník
Franck Nijhof
Marc Mueller
Pim
Erik Montnemery
Philip Allgaier
jan iversen