* Initial commit for deCONZ switch support
* Fix hound comment
* Fix martins comment; platforms shouldn't depend on another platform
* Fix existing tests
* New tests
* Clean up unnecessary methods
* Bump requirement to v43
* Added device state attributes to light
Previous commit d4f7dfa successfully fixed the bug in which lights
would not turn off if a transition was specified, however if 'bri' is not
present in the payload of the PUT request set to deCONZ, then any
'transitiontime' ends up being ignored. This commit addresses the
unintended side effect by reintroducing 'bri', resulting in the following
payload:
{ "on": false, "bri": 0, "transitiontime": ... }
When light.turn_off is invoked with a transition, the following payload was
sent to deCONZ via PUT to /light/N/state:
{ "bri": 0, "transitiontime": transition }
However, on recent versions of deCONZ (latest is 2.05.31 at the time of
writing) this does not turn off the light, just sets it to minimum brightness
level (brightness is clamped to minimum level the light supports without
turning it off).
This commit makes the code send this payload instead:
{ "on": false, "transitiontime": transition }
This works as intended and the light does transition to the 'off' state.
This change was tested with Philips Hue colored lights, IKEA colored lights
and IKEA white spectrum lights: they were all able to be turned off
successfully with the new payload, and none of them could be turned off with
the old payload.
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Accept and report both xy and RGB color for lights
* Fix demo light supported_features
* Add new XY color util functions
* Always make color changes available as xy and RGB
* Always expose color as RGB and XY
* Consolidate color supported_features
* Test fixes
* Additional test fix
* Use hue/sat as the hass core color interface
* Tests updates
* Assume MQTT RGB devices need full RGB brightness
* Convert new platforms
* More migration
* Use float for HS API
* Fix backwards conversion for KNX lights
* Adjust limitless min saturation for new scale
* Improve service by allowing to reference entity id instead of deconz id
* Change from having access to full entities to only store entity id together with deconz id
* Don't use eval, there is a dict type for voluptuous
* Use entity registry instead of keeping a local registry over entity ids
* Removed old code
* Add test for get_entry
* Bump dependency to v28
Fixed call to protected member
* Use chain to iterate over dict values
* Cleanup
* Fix hound comment
* Cleanup
* Follow refactoring of entity
* Revert to using a local registry
* Remove unused import
* self.hass is automatically available when entity is registered in hass
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
Robert Svensson
Leonardo Brondani Schenkel
Adam Mills
ErnstEeldert
Fabian Affolter