* Add missing function in class.
write_coils was missing.
* Remove dead code.
The HA configuration secures that CONF_TYPE only contains legal values,
so having an empty assert to catch unknown values is dead code.
An empty assert is not informative.
* Reuse HA constants for serial configuration.
Reusing HA consts reduces the need for translation.
Sort/group constants in const.
* Change const name ATTR_* to CONF_*
* Correct wrong import
* ATTR_* for service and CONF_* for schemas.
* Revert change to service call.
* Rename CONF_TEMPERATURE -> ATTR_TEMPERATURE
Avoid possible division problem in set_temperature.
* Fix for issue #10498 Raspi GPIO binary_sensor produces unreliable responses ("Doorbell Scenario")
Changes overtaken from PR#31788 which was somehow never finished
* Fix for issue #10498 Raspi GPIO binary_sensor produces unreliable response. Changes taken over from PR31788 which was somehow never finished
* Remove unused code (pylint warning)
* Add Compensation Integration
Adds the Compensation Integration
* Add Requirements
add missing requirements to compensation integration
* Fix for tests
Fix files after tests
* Fix isort
ran isort
* Handle ADR-0007
Change the configuration to deal with ADR-0007
* fix flake8
Fix flake8
* Added Error Trapping
Catch errors.
Raise Rank Warnings but continue.
Fixed bad imports
* fix flake8 & pylint
* fix isort.... again
* fix tests & comments
fix tests and comments
* fix flake8
* remove discovery message
* Fixed Review changes
* Fixed review requests.
* Added test to test get more coverage.
* Roll back numpy requirement
Roll back numpy requirement to match other integrations.
* Fix flake8
* Fix requested changes
Removed some necessary comments.
Changed a test case to be more readable.
* Fix doc strings and continue
* Fixed a few test case doc strings
* Removed a continue/else
* Remove periods from logger
Removed periods from _LOGGER errors.
* Fixes
changed name to unqiue_id.
implemented suggested changes.
* Add name and fix unique_id
* removed conf name and auto construct it
* WRITE_COIL uses write_coils in case of an array.
WRITE_REGISTER uses write_register/write_registers depending
on whether value is singular or an array.
WRITE_COIL is modified to be similar and uses
write_coil/write_coils depending on whether value is singular or an
array.
* Update SERVICE_WRITE_COIL to allow list.
* Resolve rebase conflict.
Remove logging
* lint: fix elif after return
* fix attribution
* add tests for None valuea
* Remove Entity import
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Import SensorEntity
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Inherit SensorEntity
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* remove unused logging
* Use CoordinatorEntity
* Use type instead of name.
* add all entities
* add nice rounding to temperature and humidity
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Remove unit from garmin connect
* Remove unit from hvv departures
* Remove device class timestamp from device condition and trigger
* Remove unit from systemmonitor
* Use device class constant for timestamp in ring
* add config flow support to google_travel_time
* fix bugs and add strings
* fix import and add new test
* address comments in #43419 since this is a similar PR
* fix default name and test
* add unique ID and device info
* fix test
* feedback from waze PR
* continue incorporating feedback from waze PR
* final fixes and update tests
* call update in lambda
* Update homeassistant/components/google_travel_time/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* additional fixes
* validate config entry data during config flow and config entry setup
* don't store entity
* patch dependency instead of HA code
* fixes
* improve tests by moving all patching to fixtures
* use self.hass instead of setting self._hass
* invert if
* remove unnecessary else
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
We also don't need to call `int()` anymore due to underlying fixes in
the python-vlc-telnet library.
I believe this is the last item extracted from PR #44776.
* Adding option for setpoint override mode
Temporary setpoint override mode can now be set on or off. 'Constant' setpoint override mode will be used when Temporary is set to off
* Changes after review comment
Added default value for the setpoint override mode
* Add zwave_js.bulk_set_partial_config_parameters service
* update to handle command status
* add test for awake node
* test using a device in service call
* Bump zwave-js-server-python to 0.23.0 and update integration to support schema changes
* refactor notification evenets a bit
* fix tests and bug fixes
* additional changes due to new PR
* add command class and command name
* use new event names so we can retain event property names
* handle command status being returned from async_set_config_parameter
* bump dependency version
* adjust log message to be consistent
* disable pylint warning
* Update homeassistant/components/zwave_js/services.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add test for awake node
* switch async_get_registry to async_get
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix template fan default speed count
The default speed count was defaulting to 3 when percentage
was implemented instead of the documented value of 100
* Increase coverage
* remove unreachable code
Seems the code assumed a different `vlc_telnet` API.
Note that this doesn't address issues in `update()`, which will be
handled in a different PR.
PR extracted from #44776.
Some routers will lowercase all the hostnames. Since we
already lowercase hostnames for matching purposes, we now
pass the lowercased hostname to the integration.
Currently only roomba cared about this, and has been adjusted.
* Simplify maxcube integration
Device objects returned by maxcube-api dependency are stable, so
we do not need to resolve from the device address every time.
Also, refactor and unify how maxcube integration sets temperature & mode.
* Raise ValueError if missing parameters for set_temperature method
Raise a ValueError exception If set_temperature does not receive
a temperature parameter.
Also, document properly _set_target method.
* Use Type | None instead of Optional[Type] annotation
* Protect set_hvac_mode and set_preset_mode from unsupported parameters
* Change modbus configuration to new style.
The old (frozen) configuration is still supported, but when detected a big
warning is issued that it will soon be removed. This allows users to change
their configuration at their pace.
Clean configuration SCHEMAs and move common modbus parts
to MODBUS_SCHEMA (renamed from BASE_SCHEMA).
Add BASE_COMPONENT_SCHEMA to ensure common configuration of components.
All component define e.g. NAME, move these to a common schema.
change components (binary_sensor, sensor, switch) to new config
Add test set for modbus itself (old config and discovery_info).
Add test of devices discovery_info configuration
* Update discovery_info configuration for binary_sensor.
* Update discovery_info configuration for sensor.
* Update discovery_info configuration for switch.
* Review comments.
* update due to change in core
* flake8 problem.
* Correct log message.
* add should_poll property.
* Fix polling for Modbus binary sensor
* Fix polling for Modbus sensor
* Fix polling for Modbus switch
* Fix switch.
* Fix pytest errors.
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/modbus.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ToogleEntity -> SwitchEntity and add abastract
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/modbus/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* removed if/else in test.
* Remove other if.
Co-authored-by: Vladimir Zahradnik <vladimir@zahradnik.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ZHA lock code services and events
* ZHA Locks: A few more services, use the library functions
* Catch exception when command id is not in command list
* Add tests for lock code services
* Add tests for enable/disable
* Better document code slot ID shifting
* Simplify cluster commands
* git push --all origin
* Fix percentage to ordered list conversion
* Tests for mqtt fan and fixes
* Improve tests and error handling base config
* Additional tests
* Tests completed, small fixes
* Allow preset mode and percentages combined
* Remove raise in setup and update tests
* Alignment with fan entity mode
* Fix pylint for len-as-condition
* Remove python binary cache file from PR
* Additional tests on async_turn_on and fix
* Added comments for deprecation of speeds
* Schema checks before init
* Optimize pre schema checks
* Correct schema checks
* Update homeassistant/components/mqtt/abbreviations.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Warnings for exceptions - testing speed_range
* Update homeassistant/components/mqtt/abbreviations.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
* Save with black
Co-authored-by: Erik Montnemery <erik@montnemery.com>
J. Nick Koston
Robert Svensson
HomeAssistant Azure
Franck Nijhof
Raman Gupta
jan iversen
mburget
epenet
Petro31
Álvaro Fernández Rojas
Paulus Schoutsen
Bram Kragten
Oliver
Shay Levy
Khole
FMKaiba
Erik Montnemery
MatthewFlamm
youknowjack0
Martin Hjelmare
Aaron Bach
Joakim Sørensen
arturdobo
Simone Chemelli
jjlawren
LJU
Michael
Mario Limonciello
Marvin Wichmann
Philip Allgaier
Vincent Le Bourlot
Nicolas Braem
Anders Melchiorsen
uvjustin
Steven Looman
Quentame
David F. Mulcahey
jugla
Jacob Shufro
Ruslan Sayfutdinov
Matthias Alphart
David McClosky
Martidjen
Niccolo Zapponi
Guido Schmitz
Alan Tse
Marc Mueller
Tobias Sauerwein
Kevin Worrel
Jan Bouwhuis
Pim
SukramJ
Robert Delpeut
Unai
Jesse Campbell
Christian Soltenborn
conflipper
Jonathan Keslin
Ville Skyttä
mptei
D3v01dZA
Garrett
starkillerOG