* Enable setting XY color and transition time by client
* New test for setting XY color value
* Correct block outdent
* New test for setting transition time value
* Fixed commented out code
Prior 0.113 all lights and switches were reported as dimmable devices and this was fixed by #37978.
However, under some circumstances Alexa will not smoothly transition from those broken devices to the new ones as it cache the list of entities.
It is imperative to have Alexa rediscover all devices and then remove the now non-responding duplicates using the Alexa phone App. This can take quite a while if you have lots of devices.
An alternative would be to log to the Alexa web site and remove all the lights instead and then re-discover them all.
If you have multiple echo devices on your network, it is possible that the entries would continue to show as duplicates. This is due to an individual echo devices caching the old list and re-using it.
The only known solution for this is to remove your echo devices from your Amazon account and re-add them.
After that, have Alexa rediscover all your devices.
This is a one-off requirement.
Fixes#39503
* Wait for the state of the entity to actually change before resolving PUT request
Additionally, we cache the entity's properties for up to two seconds for the successive GET state request
When Alexa issues a command to a Hue hub; it immediately queries the hub for the entity's state to confirm if the command was successful.
It expects the state to be effective immediately after the PUT request has been completed.
There may be a delay for the new state to actually be active, this is particularly obvious when using group lights.
This leads Alexa to report that the light had an error.
So we wait for the state of the entity to actually change before responding to the PUT request.
Due to rounding issue when converting the HA range (0..255) to Hue range (1..254) we now cache the state sets by Alexa and return those cached values for up to two seconds so that Alexa gets the same value as it originally set.
Fixes#38446
* Add new tests verifying emulated_hue behaviour.
* Increase code test coverage.
The remaining uncovered lines can't be tested as they mostly check that the hass framework or the http server properly work.
This commit doesn't attempt to fix exposed issues as it would be out of scope ; it merely create the tests to exercise the whole code.
* Update homeassistant/components/emulated_hue/hue_api.py
* Add test for state change wait timeout
* Preserve the cache long enough for groups to change
* Update tests/components/emulated_hue/test_hue_api.py
Co-authored-by: J. Nick Koston <nick@koston.org>
This issue has been corrected and then reverted multiple times.
It seems that the core issue was a casing one (On/off vs On/Off) ; for better
matching with a real Hue hub, also add the productname.
Tested to work with echo 2 and echo 5.
Since we now base all of exposure checks on data that
will not change, we can cache the result instead
of calculating it every loop.
This change complements the work done in #32718
* Make emulated hue detectable by Busch-Jaeger free@home SysAP
* Emulated hue: Remove unnecessary host line from UPnP response
* Test that external IPs are blocked for config route
* Add another test for unauthorized users
* Change hue username to nouser
nouser seems to be used by the official Hue Bridge v1 Android app and is
used by other projects as well
Co-authored-by: J. Nick Koston <nick@koston.org>
* Return emulated hue id for update requests
* Emulated Hue: Rename function argument to match its content
* Use HTTP status consts throughout the test
* Use HTTP status consts in UPnP test
* Fix emulated_hue brightness off by one
Hue uses a max brightness of 254, Home Assistant
uses a max brightness of 255. Values > 127 were
off by one.
* use constant
* fix test
* add debug
* Revert "add debug"
This reverts commit 242220a02e.
* Use f-strings in integrations starting with B
* Use f-strings in integrations starting with C
* Use f-strings in integrations starting with D
* Use f-strings in integrations starting with E
* Fix pylint errors
* Fix pylint errors v2
* Fix tests
* Fix tests v2
* Fix light.turn_on for emulated_hue
HarmonyHub sends `{'xy': [0, 0], 'on': True, 'bri': 0}` when turning on lights that do not support brightness control. Unfortunately current logic always uses brightness value to control on/off state which makes no sense for lights that don't support brightness at all. This change fixes that behavior, making light without brightness control usable with HarmonyHub and probably some other remotes.
* Test 'no_brightness' lights
If an entity is in unavailable state in HA, we expose this
as unreachable to Hue clients. This helps when troubleshooting
Hue issues because you can now receive feedback if there is an issue
on the HA side.
* [Hue API] Add color support
Adds color support to the hue api (specifically hue/saturation). Switched from using a tuple to convey state internally to using a dict to make adding new fields easier.
* [Hue API] Add unit test for color support
* set cover level using emulated_hue
* changed mapping for service turn_on/off for cover.
* removed whitespace for the sake of hound
* using const for domains instead of hardcoded strings.
* change length of lines for the sake of hound
* fixed under-intended line
* changed intent for the sake of hound
* Move more constants to const.py
* Import constants directly from const
* ATTR_ENTITY_ID is not defined in media_player
* MEDIA_PLAYER_PLAY_MEDIA_SCHEMA is still in __init__.py
* Correct imports in tts
* PLATFORM_SCHEMA, SCHEMA is still defined in __init__.py
* Pandora imports several services
* Some additional fixes for move of const in media_player
* Fix hound lengths
* Update hue_api.py
add dummy group handler for logitech-pop
* Update __init__.py
add HueGroupView for logitech pop
* Update __init__.py
removed whitespace on blankline
* fix line limit and space
* fix indents
* fix more docstring and formatting issues.
* fix more whitespace issues
* Fix pylint issue
* Remove SPEED_MED from fan
* Correctly use the oscillation on/off payloads for MQTT fan
* Add set_direction service documentation
* Correct function name for Wink fans
* Check for existence of the correct topic
* Enable set fan speed in emulated_hue
* features -> functions
* Final emulated_hue fan fixes
* Fix linting issues
* Revert to supported features instead of supported functions
* Fix logic
* Add a test for emulated_hue fan support
Franck Nijhof
denes44
Jean-Yves Avenard
J. Nick Koston
kbickar
Jean-Yves Avenard
Shulyaka
Igor Gocalinski
Thomas Hollstegge
springstan
Slava
Martin
Christian Clauss
Rafał Słota
Ville Skyttä
Bas Nijholt
orrpan
NobleKangaroo
Chris Halls
croghostrider
Franck Nijhof
Paulus Schoutsen
Alex Bahm
Thiago Oliveira
Fabian Affolter
Patrick T.C
Joakim Plate
merc1031
Paulus Schoutsen
cdce8p
Marcus
Jack Wilsdon
Joaquín
Adam Mills
Robbie Trencheny
Paulus Schoutsen