* Add jammed state support for MQTT lock
* Correct payload jammed key
* Add tests - rename solved to ok
* Rename jammed state and template topics to motor
* Use state topic for handling motor state
* Follow up comments
* Change default behaviour `state_unjammed`
* Skip `state_unjammed`
* Move entity/area resolution to async_match_states
* Special case for covers in HassTurnOn/Off
* Enable light color/brightness on areas
* Remove async_register from default agent
* Remove CONFIG_SCHEMA from conversation component
* Fix intent tests
* Fix light test
* Move entity/area resolution to async_match_states
* Special case for covers in HassTurnOn/Off
* Enable light color/brightness on areas
* Remove async_register from default agent
* Remove CONFIG_SCHEMA from conversation component
* Fix intent tests
* Fix light test
* Fix humidifier intent handlers
* Remove DATA_CONFIG for conversation
* Copy ServiceIntentHandler code to light
* Add proper errors to humidifier intent handlers
* Add preload and reload service calls to conversation
* Add conversation preload/reload to websocket API
* Merge prepare into reload
* reload service and prepare websocket API
* Add preload and reload service calls to conversation
* Add conversation preload/reload to websocket API
* Merge prepare into reload
* reload service and prepare websocket API
* Add language lock for loading intents
* Add more tests for code coverage
* adjust device registry
* ignore test unique id
* update test
* ditch uniqueid + prefix serial
* adjust test
* add tests
* fix switch test
* prefix all identifiers
* Update homeassistant/components/matter/adapter.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* no underscore in id
* fix test
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Only wait for import flows to initialize at setup
* Update hassio tests
* Update hassio tests
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Force live logbook to send an empty message to indicate no results
Since the sync task can take a while if the recorder is
busy, the logbook will appear to hang if we do not send
the first partial message even if its empty.
This work is in preparation for a higher database
commit interval where this issue is most obvious.
The historical only path did not have this issue because
it never had to wait for the db sync.
* update tests
* bae entity unique id on Operational Instance Name standard
* Update homeassistant/components/matter/entity.py
Co-authored-by: Stefan Agner <stefan@agner.ch>
* also adjust unique id for devices
* final adjustment
* remove assert on server_info
* move device info to init
* fabric_id_hex
* use DeviceInfo instead of dict
* fix test
Co-authored-by: Stefan Agner <stefan@agner.ch>
* Add Thread integration
* Add get/set operational dataset as TLVS
* Add create operational dataset
* Add set thread state
* Adjust after rebase
* Improve HTTP status handling
* Improve test coverage
* Change domains from thread to otbr
* Setup otbr from a config entry
* Add files
* Store URL in config entry data
* Make sure manifest is not sorted
* Remove useless async
* Call the JSON parser more
* Don't raise exceptions without messages
* Remove stuff which will be needed in the future
* Remove more future stuff
* Use API library
* Bump library to 1.0.1
* Initial "group members assume state" implementation for ZHA
* Remove left-over debug flag (where polling was disabled)
* Implement _send_member_assume_state_event() method and also use after turn_off
* Only assume updated arguments from service call to group
* Make code more readable and change checks slightly
* Move "send member assume state" events to LightGroup on/off calls
* Include new config option in tests
* Check that member is available before updating to assumed state
* Lower "update group from child delay" for debouncer to basically 0 when using assumed member state
* Allow "child to group" updates regardless of config option
This is not needed, as group members will not update their state, as long as they're transitioning. (If a group transitions, it also sets its members to transitioning mode)
This fixes multiple issues. Previously, the state of a group was completely wrong when:
- turn on group with 10 second transition
- turn on members individually
- turn off members individually
- group state would not update correctly
* Move "default update group from child delay" constant
* Change to new constant name in test
* Also update fan test to new constant name
* Decrease "update group from child delay" to 10ms
In my testing, 0.0 also works without any issues and correctly de-bounces child updates when using the "assume state option".
This is just for avoiding multiple state changes when changing the group -> children issue individual updates.
With 2 children in a group and delay 0, both child updates only cause one group re-calculation and state change.
0.01 (10ms) should be plenty for very slow systems to de-bounce the update (and in the worst case, it'll cause just another state change but nothing breaks)
* Also implement "assuming state" for effect
Not sure if anybody even uses this, but this one is a bit special because the effect is always deactivated if it's not provided in the light.turn_on call.
* Move shortened delay for "assuming members" to a constant
* Add basic test to verify that group members assume on/off state
* Move _assume_group_state function declaration out of async_added_to_hass
* Fix rare edge-case when rapidly toggling lights and light groups at the same time
This prevents an issue where either the group transition would unset the transition flag or the single light would unset the group transition status midst-transition.
Note: When a new individual transition is started, we want to unset the group flag, as we actually cancel that transition.
* Check that effect list exists, add return type
* Re-trigger CI due to timeout
* Increase ASSUME_UPDATE_GROUP_FROM_CHILD_DELAY slightly
The debouncer is used when updating group member states either by assuming them (in which case we want to barely have any delay), or between the time we get the results back from polling (where we want a slightly longer time).
As it's not easily possible to distinguish if a group member was updated via assuming the state of the group or by the polling that follows, 50 ms seems to be a good middle point.
* Add debug print for when updating group state
* Fix issues with "off brightness" when switching between group/members
This fixes a bunch of issues with "off brightness" and passes it down to the members correctly.
For example, if a light group is turned off with a transition (so bulbs get their level set to 1), this will also set the "off brightness" of all individual bulbs to the last level that they were at.
(It really fixes a lot of issues when using the "member assume group state" option. It's not really possible to fix them without that.)
Furthermore, issues where polling was previously needed to get the correct state after "playing with transitions", should now get be resolved and get correct state when using the "members assume group state" option.
Note: The only case which still can't be fixed is the following:
If individual lights have off_with_transition set, but not the group, and the group is then turned on without a level, individual lights might fall back to brightness level 1 (<- at least now shows correctly in UI even before polling).
Since all lights might need different brightness levels to be turned on, we can't use one group call. But making individual calls when turning on a ZHA group would cause a lot of traffic and thereby be counter-productive.
In this case, light.turn_on should just be called with a level (or individual calls to the lights should be made).
Another thing that was changed is to reset off_with_transition/off_brightness for a LightGroup when a member is turned on (even if the LightGroup wasn't turned on using its turn_on method).
off_with_transition/off_brightness for individual bulbs is now also turned off when a light is detected to be on during polling.
Lastly, the waiting for polled attributes could previously cause "invalid state" to be set (so mid-transition levels).
This could happen when group and members are repeatedly toggled at similar times. These "invalid states" could cause wrong "off brightness" levels if transitions are also used.
To fix this, we check after waiting for the polled attributes in async_get_state to see if a transition has started in the meanwhile. If so, the values can be discarded. A new poll will happen later and if using the "members assume group state" config option, the values should already be correct before the polling.
* Enable "group members assume state" config option by default
The config tests are also updated to expect the config option be enabled by default.
For all tests, the config option is generally disabled though:
There are only two group related tests. The one that tests this new feature overrides the config option to be enabled anyway.
The other tests works in a similar way but also "sends" attribute reports, so we want to disable the feature for that test.
(It would also run with it enabled (if the correct CHILD_UPDATE value is patched), but then it would test the same stuff as the other test, hence we're disabling the config option for that test.)
* Add tier summation delivered for zlinky
* Improve name case
* Add other tiers and register tier
* Fix smartenergy sensor update
* Account for new reporting configuration in unit tests
* Use cluster ID attributes instead of hardcoding the values
* Use tier names instead of the numeric constants for formatter
* Revert active register tier delivered
* Fix tests
Co-authored-by: puddly <32534428+puddly@users.noreply.github.com>
* Update Kostal integration to use maintained lib
* Update Kostal integration to use pykoplenti
* Update kostal_plenticore tests for new lib
* Fix tests config_flow & diagnostics after changes
* Make the kitchen_sink integration set up a config entry
* Update homeassistant/components/kitchen_sink/config_flow.py
Co-authored-by: epenet <6771947+epenet@users.noreply.github.com>
* Add singleton check in import step + add test
* Fix tests
Co-authored-by: epenet <6771947+epenet@users.noreply.github.com>
* Remove sky connect config entry if USB stick is not plugged in
* Tweak cleanup
* Give some stuff more cromulent names
* Do the needful
* Add tests
* Tweak
* Implement locking, unlocking and jammed on MQTT lock
Signed-off-by: Patrick ZAJDA <patrick@zajda.fr>
* Add tests
Signed-off-by: Patrick ZAJDA <patrick@zajda.fr>
* Refactor condition
Signed-off-by: Patrick ZAJDA <patrick@zajda.fr>
* Parametrize tests
Signed-off-by: Patrick ZAJDA <patrick@zajda.fr>
* Manage only locking and unlocking
Signed-off-by: Patrick ZAJDA <patrick@zajda.fr>
* Remove jammed from abbreviations
Co-authored-by: Jan Bouwhuis <jbouwh@users.noreply.github.com>
* set valid states in self._valid_states
Signed-off-by: Patrick ZAJDA <patrick@zajda.fr>
Signed-off-by: Patrick ZAJDA <patrick@zajda.fr>
Co-authored-by: Jan Bouwhuis <jbouwh@users.noreply.github.com>
Maciej Bieniek
starkillerOG
mkmer
Shay Levy
Franck Nijhof
Erik Montnemery
fwestenberg
Duco Sebel
Michael
Jan Bouwhuis
Michael Hansen
Paulus Schoutsen
Joris Pelgröm
Aarni Koskela
GrahamJB1
epenet
Robert Svensson
Marcel van der Veldt
J. Nick Koston
Daniel Gangl
Aaron Bach
Jon Caruana
Guido Schmitz
Jack Boswell
Brandon Rothweiler
Nathan Spencer
TheJulianJES
Paul Bottein
jan iversen
Jussi Rosenberg
Patrick ZAJDA
mkmer
Robert Hillis