* maxcube: Make it possible to return to auto mode
It's currently not possible to switch back to auto (schedule) mode after
changing to manual or vacation. Add `PRESET_NONE` to list of presets
that will return thermostat back into auto (schedule) mode.
Additionally, use `PRESET_AWAY` instead of custom preset name for
vacation mode.
* maxcube: Provide `hvac_action` based on valve state
Not supported for wall thermostats.
* maxcube: Add support for Comfort, Eco, Off and On modes
Off is mapped to HVAC_OFF, while On - to HVAC_HEAT.
* maxcube: Add `hvac_action` support for wall thermostats
We check all thermostats in the same room as the wall thermostat. If at
least one of them has its valve open - the room is being heated.
* maxcube: Expose valve position as state attribute
Also fix a small logical error in `hvac_action`.
* maxcube: Fix linter errors and formatting
* maxcube: Adjust mapping between MAX! and HA modes and presets
MAX! 'Manual' mode now corresponds to 'Heating' mode of HA. MAX! 'Eco'
and 'Comfort' temperatures are 'Heating' mode presets. MAX! 'On' mode is
now a 'Heating' preset, too.
* maxcube: Address review comments
* Prevent a single accessory setup failure from breaking all HomeKit accessories
Raise the max devices to 150 as the spec allows for this
many. Previously 100 made sense because of the event
storms when homekit started would sometimes break pairing,
as these have largely been fixed in 0.109 (still a few
to cleanup) using the HAP spec limit of 150 is now possible.
* Handle both failure states
* Convert homekit fans to use service callbacks
* Convert homekit fans to use service callbacks
Service callbacks allow us ensure that we call
fan services in the correct order.
* Avoid calling turn_on if a speed is sent and the device is on
* Fix test to not leave files behind
* Fix test
* Update homeassistant/components/homekit/type_fans.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Set homekit alarm/sensor/switch state as soon as possible
This change is part of a multi-part effort to fix the
HomeKit event storms on startup.
Previously we would set the states after HomeKit
had started up which meant that when the controller
client connected it would request the states and get
a list of default states so all the initial states
would always be wrong. The defaults states generally went
unnoticed because we set the state of each HomeKit device
soon after which would result in an event storm in the log
that looked like the following for every client and every
device:
Sending event to client: ('192.168.x.x', 58410)
Sending event to client: ('192.168.x.x', 53399)
Sending event to client: ('192.168.x.x', 53399)
To solve this, we now set the state right away when we
create the entity in HomeKit, so it is correct on
initial sync, which avoids the event storm. Additionally,
we now check all states values before sending an update
to HomeKit to ensure we do not send events when nothing
has changed.
* pylint
* Fix event storm in covers as well
* fix refactoring error in security system
* cover positions, now with constants
* Add NUT tests for an Eaton 5E650I UPS
* add a test to make sure multiple ups get setup
* Add a few more upses
* fix missing status key
* cover
* Force CI run
* Allow async_setup changes to config entry data be taken into account
* Fix tests
* Limit scope try…finally
* Update tests/test_config_entries.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Fix import
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Run scripts
* Improvement strings
* Fix FlowOptions update listener
* Update .ceveragerc
* Add tests
* Better strings
* Add test for OptionsFlow
* Run gen_requirements_all.py once again
* Fix pylint errors
* Log error when there is no bravia.conf file during import
* Improvement strings
* Use braviarc object from hass.data in options flow
* Use async_add_executor_job for IO
* Fix options flow test
* Fix tests
* Remove host_reachable method
* Remove dependencies
* Change setup_platform method to async
* Remove calling system_info
* Save mac in the config entry
* Fix get ignore sources
* Fix read config from file
* Remove the side effect from init
* Fix user_input for user step
* Switch OrderedDict to dict
* New config_entry instance for each test
* Revert change
* Patch async_setup_entry in test_import
* Change a way to create source list
* Consolidate repeated block of code
* Update tests
* Suggested change
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested channge
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested change
* Patch async_setup_entry
* Remove unnecesary if
* suggested change
* Suggested change
* Fix tests
* Fix pylint error
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
In order to make this automatically discoverable via the registry
there needs to be a DEVICE_CLASS_BATTERY_CHARING in binary sensor
so we can tell what is a battery and what is a charge sensor.
* Reduce loss of precision when setting light percent brightness
This part of an effort to fix all the round trip light
brightness percentages that cause errors with homekit
, alexa, and other devices that use percentage.
* fix demo light test
* Move consts to const, general cleanup
* Add unique id
* Add default icon
* Set supported features based on sound output
* Update homeassistant/components/webostv/media_player.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Set device class
* Add software_info to client mock
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Implemented snapcast latency attributes
* Code review changes and Snapcast maintenance
Updated how entity services get called - now conforms to most
current method
* Cleanup tasks
Moved constants into separate file
Removed unnecessary logger message
Remove unnecessary schemas
* FIx linting errors
* Sort imports
* Update with requested change
Better - use next()
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Add guards for bad service calls
* Add back in platform schema
* Add check for unjoin service call
* Fix lint/format
* remove comma inserted by black
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Convert sense to use DataUpdateCoordinator for trends
* remove unused
* request update right away
* clarify
* call async refresh later
* Update homeassistant/components/sense/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/sense/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Adding totalconnect zones as HA binary_sensors
* fix manifest.json
* flake8/pydocstyle fixes. Added codeowner.
* Update formatting per @springstan guidance.
* Fixed pylint
* Add zone ID to log message for easier troubleshooting
* Account for bypassed zones in update()
* More status handling fixes.
* Fixed flake8 error
* Another attempt at black/isort fixes.
* Bump total-connect-client to 0.50. Simplify code using new functions in
total-connect-client package instead of importing constants. Run black
and isort.
* Fix manifest file
* Another manifest fix
* one more manifest fix
* more manifest changes.
* sync up
* fix indent
* one more pylint fix
* Hopefully the last pylint fix
* make variable names understandable
* create and fill dict in one step
* Fix name and attributes
* rename to logical variable in alarm_control_panel
* Remove location_name from alarm_control_panel attributes since it is
already the name of the alarm.
* Multiple fixes to improve code per @springstan suggestions
* Update homeassistant/components/totalconnect/binary_sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Multiple changes per @MartinHjelmare review
* simplify alarm adding
* Fix binary_sensor.py is_on
* Move DOMAIN to .const in line with examples.
* Move to async_setup
* Simplify code using new features of total-connect-client 0.51
* First crack at config flow for totalconnect
* bump totalconnect to 0.52
* use client.is_logged_in() to avoid total-connect-client details.
* updated generated/config_flow.py
* use is_logged_in()
* Hopefully final touches for config flow
* Add tests for config flow
* Updated requirements for test
* Fixes to test_config_flow
* Removed leftover comments and code
* fix const.py flake8 error
* Simplify text per @Kane610 https://github.com/home-assistant/home-assistant/pull/32126#pullrequestreview-364652949
* Remove .get() to speed things up since the required items should always
be available.
* Move CONF_USERNAME and CONF_PASSWORD into .const to eliminate extra I/O
to import from homeassistant.const
* Fix I/O async issues
* Fix flake8 and black errors
* Mock the I/O in tests.
* Fix isort error
* Empty commit to re-start azure pipelines (per discord)
* bump total-connect-client to 0.53
* Update homeassistant/components/totalconnect/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/totalconnect/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fixes per @balloob comments
* Fix imports
* fix isort error
* Fix async_unload_entry
It still referenced CONF_USERNAME instead of entry.entity_id
* Added async_setup so not breaking change. Fixed imports.
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove TotalConnectSystem() per @MartinHjelmare suggestion
* Moved from is_logged_in() to is_valid_credentials()
The second is more accurate for what we are checking for, because is_logged_in() could return False due to connection error.
* Fix import in test
* remove commented code and decorator
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix test_config_flow.py
* bump total-connect-client to 0.54
* remove un-needed import of mock_coro
* bump to total-connect-client 0.54.1
* re-add CONFIG_SCHEMA
* disable pylint on line 10 to avoid pylint bug
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Convert homekit thermostats to use service callbacks
Service callbacks allow us to get all the temperature
changes in one request so we can avoid all the
need to store state and debounce.
* remove excess debug
* Fix lock and light tests
* Ensure all code for Thermostats has coverage
* I am answering all the homekit cases anyways so might as well be aware of regressions
* Make lock notifications reliable
* Update homeassistant/components/homekit/type_lights.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Handle all zero serial numbers in NUT
* Add additional nut tests
* Update homeassistant/components/nut/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* remove re
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add test and fix tests for update logging.
* Fix update logging.
* Remove assert is True
* guard against platform config and use async_write_ha_state
* fix discovery info passing to platform
* Improve testing for entities in init
* Fix reversed door closing/opening states in HomeKit
When we closed the door we would set state 2 which
is "Opening" it should have been 3 which is
"Closing"
When we opened the door we would set state 3 which
is "Closing" it should have been 2 which is
"Opening"
Add constants to make this easier to catch
in the future.
* Remove debug
* Add note about target door state
* deCONZ support for new device trigger for Feller EDIZIOdue Friends of hue Switch
* Rename to general name -friends of hue switch
* translation for top and bottom buttons
* add pyserial to manifest
pymodbus is very developer oriented and assumes every developer
adapt the requierements.txt to his/hers needs.
Our requirements.txt is different it contains all posibilities allowing
user to later change configuration without having to install extra
packages.
As a consequence manifest.json needs to include the pyserial.
* modbus: make truly async client creation
Make hass call listen_once async.
Integrate content of start_modbus into async_setup.
Do not use the boiler plate create tcp client function from
pymodbus as it is sync, and also does not work well with asyncio,
instead call the init_<type> directly, since that is async.
* both component/modbus and component/serial uses pyserial-async
but with slighty different version requirements.
Combined the 2.
* Review 1
* Review 2
* Review
@staticmethod is no good, because the function uses class variables.
* Review
Pytest is sometimes a bit cryptic, lets hope this does it.
* Add homekit configuration option to bind to default interface
Homekit can fail to be discoverable because the
zeroconf default is to bind to all interfaces
(InterfaceChoice.All). This does not work
on some systems and (InterfaceChoice.Default) which
binds to 0.0.0.0 is needed for homekit to zeroconf
to function.
A new option is available for homekit
zeroconf_default_interface: true
* Update tests
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Review items
* has a default
* Revert "has a default"
This reverts commit 24ecf0920f.
Breaks the tests
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Clean up demo camera
* Complete test_motion_detection
* Clean up image reading
* Clean up camera integration async methods
* Fix and clean camera integration tests
* Fix image processing patch
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* syntax for mac (pyupgrade)
* Change single key to BLID
* Resolve dict conflict
* Update homeassistant/components/roomba/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add description
* Revert "Remove test config flow"
This reverts commit 26a89422e8.
* Add tests
* Remove check if user none
* Replace CONF_USERNAME to CONF_BLID (breaking change)
* Update test_config_flow.py
* Add code owners
* Remove CONF_USERNAME (unused)
* Add multiple vacuum
* Add multiple vacuum
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix syntax name
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove CONF_PREFIX (unused)
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add import UNIT_PERCENTAGE
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add last_user_name to alarm device_state_attributes
changed_by_entity_id was removed in 0.108 and replaced
with changed_by_keypad. This didn't provide enough
data to discover the last user that changed the alarm.
* Switch to changed_by and restore since
we loose the attributes on restart
* use built-in
* Add support to the Econet integration for new attributes: lower_temp, upper_temp, ambient_temp & is_enabled
* Removing support for ambient temperature
* Rewrite parts of upnp component
* Linting
* Add SCAN_INTERVAL
* Get values simultaneously
* Move to time related constants, as per #32065
* Linting
* Move constant KIBIBYTE to homeassistant.const
* Simplify code
* Fix tests for #33344
* Changes after review
* Update homeassistant/components/upnp/sensor.py
* Changes after review
* Formatting
* Formatting
* Use ST from discovery info to avoid swapping device_types if device advertises multiple versions
* Linting
* Requirements for upnp + dlna_dmr components
* Linting
* Regen requirements
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
* Formatting
* Linting
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* HS220 dimmers are handled as lights with a limited feature set
* Dimmers look up has has_emeter every call so this is cached as well now
to resovle the performance issue.
* Improve Plex debounce/throttle logic
* Use Debouncer helper, rewrite affected tests
* Mock storage so files aren't left behind
* Don't bother with wrapper method, store debouncer call during init
* Test cleanup from review
* Don't patch own code in tests
* solve modbus issue #33872
CONF_DELAY was used in a serial connection, which is not
permitted.
Sometimes async_update is called after async_setup is completed,
but before event EVENT_HOMEASSISTANT_START is issued, leading to
a missing object.
* resolve review comment.
Do not wait for start event, but activate pymodbus directly in
async setup.
* review 2
Remark, this does not work, async_setup hangs.
clean start_modbus() from async calls, leaving only the pymodbus
setup.
* review 2a
Moved listen_once back to start_modbus, since it is sync.
* fix bug when search for string in dict fails when dict is null
* another bug fix that I only noticed because of this other bug
* add test to cover failure scenario
* update docstring
* add additional assertions to cover failure scenario that's being fixed
* Add a config flow for flume
* Sensors no longer block Home Assistant startup
since the flume api can take > 60s to respond on
the first poll
* Update to 0.4.0 to resolve the blocking startup issue
* Missed conversion to FlumeAuth
* FlumeAuth can do i/o if the token is expired, wrap it
* workaround async_add_entities updating disabled entities
* Fix conflict
Sometimes a modbus server do not respond to a transaction,
this is a contradiction to the modbus protocol specification,
but merely a matter of fact.
Use asynio.await_for() to provoke a timeout, and close the
transaction.
Some providers have set their wait_timeout to 60s
in order to pack as many users as they can on a machine.
The mysql default is 28800 seconds (8 hours)
Since mysql connection build and tear down is relativity
expensive, we want to avoid being disconnected.
We now accommodate this scenario with the following:
1. Raise the mysql session wait_timeout 28800 when we connect
2. The event session now does a 30 second keep alive to
ensure the connection stays open
* Speed up TP-Link lights
* Color temp kan be None
* hs as int, force color temp=0
* Fix color temp?
* Additional tplink cleanups to reduce api calls
* Update test to return state, remove Throttle
* Fix state restore on off/on
* Fix lights without hue/sat
Co-authored-by: J. Nick Koston <nick@koston.org>
* Load integrations with requirements in device_automation
- Split cached loader behavior out of async_get_integration
- Use cached loader for both async_get_integration and
async_get_integration_with_requirements
- Use async_get_integration_with_requirements for device_automation
resolves#33104
* Duplicate caching logic in requirements, remove loader mods
* Update homeassistant/requirements.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use asynctest patch instead of mock_coro
* Add test for supervisor ip ban
* Do not ban supervisor ip if set
* Extract supervisor ip helper
* Check supervisor ip before banning
* Remove added blank line
* Clean up get supervisor ip
Co-Authored-By: Pascal Vizeli <pvizeli@syshack.ch>
Co-authored-by: Pascal Vizeli <pvizeli@syshack.ch>
* Convert nut to a multi step config flow
* Users can now choose the ups they want in
step 2 (or skipped if only one)
* Users can now select the resources they want
to monitor based on what is actually available
on the device
* CONF_NAME has been removed as we now get the
name from NUT
* Device classes have been added which allows
the battery charge state to be seen in the
devices UI
* Remove update_interval as its for a followup PR
* explict
* reduce
* fix bug, add tests for options flow
* Test for dupe import
* Test for dupe import
* Call step directly
* Update homeassistant/components/nut/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* convert nws to component configuration
* add more debug logging
* remove assumed state
* move initialization of data into init
* refactor update logic
* use forecast success for checking available entities
* Split unique_id into more usable pieces.
use a base_unique_id for each entry. Add domain for signaling to entities. Each entity in each platform can use base_unique_id to form individual unique_id's.
* Revert "move initialization of data into init"
This reverts commit 09eb0220469285b10f0500f5f6def67415931a81.
* add silver quality scale to manifest
* unsubscribe listener in will_remove_from_hass
* initialize _unsub_listener in __init__
* use async_on_remove
* remove scan interval from configuration
* Use better name
Co-Authored-By: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add discovery support to synology_dsm
* Remove debug
* black
* Fix mocks
* Merge strings
* Move placeholders
* add missing placeholders
* reorder
* use constants in test
* Remove CONF_NAME (only displayed in discovery now)
* test reduction
* Shorten long name
* Use name for name but NOT for unique_id, remove CONF_NAME from yaml config
* Use Synology for the name for now, hopefully we can use the hostname later
* lint
* Remove name from strings
* remove =None
* show login errors at username field
* Update tests/components/synology_dsm/test_config_flow.py
Co-Authored-By: Quentame <polletquentin74@me.com>
* Update tests/components/synology_dsm/test_config_flow.py
Co-Authored-By: Quentame <polletquentin74@me.com>
* Update homeassistant/components/synology_dsm/const.py
Co-authored-by: Quentame <polletquentin74@me.com>
* update common test for modbus integration
* remove log messages from modbus setup function.
* Make global method local
* Change parameter name to snake_case
* Added support for the Pi4ioe5v9xxxx binary IO expanders.
* Correction for black failure
* Correction for black failure
* Fix for manifest.json
* Fix for flake8 fault missing a period
* Some modifications I made during tests seem to be disapeared, fixed flake8 and black test now
* WIP virtual thermostat
* WIP virtual thermostat
* WIP
* 100% tests coverage
* Manifest, codeowners, typo fix
* Lint problem
* Test file blacked
* Add a test case for b4dpxl's question
* Update CODEOWNERS
* Replacement of generic thermostat
* Cleaning
* Lint
* More lint
* Using external PyPI package, removed get()
* Fix flake8 checks
* removed virtual thermostat
* Re-fix black & isort
* Re-fix isort 2
* Update homeassistant/components/pi4ioe5v9xxxx/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/pi4ioe5v9xxxx/switch.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* black for switch
* update to latest version manual merge
* Delete test_generic_thermostat.py
* Delete .gitignore
* Delete climate.py
* Delete manifest.json
* Delete test_climate.py
* Delete test_climate.py
* fix thermostat interference
* fix thermostat interference 2
* Fix pylint
* Update .pre-commit-config.yaml
Co-authored-by: Cyril <cyril.dubus@effipilot.com>
Co-authored-by: Niflou <dubuscyr@gmail.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Skip parsing session if incomplete
* Schedule an update if session data is incomplete
* Mark as callback
* Remove update() & convert to async, abort if any session is incomplete
* replaced MagicMock with CoroutineMock to avoid exception
* added conversion to str so mock returns unique-id that doesn't throw json exception
* added non-empty config since hass throws exception when config is empty
* MQTT Alarm Control Panel to have all available states
* MQTT Alarm Control Panel to have all available states
* test_arm_custom_bypass_* tests added
* MQTT payload_arm_custom_bypass abbreviation
* Add config flow to Synology DSM
* Use proper sensor unique ID from flow + sensor name
* Add description to api_version
* Add authentication flow check
* Add device_info
* Add test_login_failed test
* Bump python-synology to 0.5.0
* 0.5.0 test updates
* Use NAS S/N as config_flow unique_id
* Add missed conf disks + volumes
* Review: async_unload the async_track_time_interval
* Fix NoneType for disks or volumes
* Keep all disks and volumes forever
* Update homeassistant/components/synology_dsm/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/synology_dsm/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix "Keep all disks and volumes forever" for empty import
* Fix prettier
* Remove useless LOGGER in config flow
* Fix Synology DSM tests doing I/O
Co-authored-by: J. Nick Koston <nick@koston.org>
Ernst Klamer
Oleksii Serdiuk
J. Nick Koston
Chris Talkington
Philipp Danner
HomeAssistant Azure
Paulus Schoutsen
presslab-us
Aidan Timson
Fredrik Erlandsson
springstan
Aaron Bach
marecabo
Maciej Bieniek
Andrew Sayre
Bram Kragten
Adam Michaleski
BarrettLowe
Alan Tse
Kris Bennett
Franck Nijhof
Fabian Affolter
mezz64
Jason Swails
Quinn Hosler
Jeff Irion
jrester
Robert Chmielowiec
Julien Brochet
Pascal Roeleven
James Nimmo
Colin Robbins
Austin Mroczek
MatthewFlamm
Erik Montnemery
bqstony
jan iversen
Karthikeyan Singaravelan
Matt Snyder
Gerard
Robert Svensson
Martin Hjelmare
Dustin Wyatt
Quentame
Yarmo Mackenbach
David F. Mulcahey
Save me
Kevin Eifinger
Raman Gupta
Alexei Chetroi
Brian Rogers
Richard Powell
Steven Looman
Knapoc
Minims
Ville Skyttä
Kit Klein
jjlawren
Carlos Gustavo Sarmiento
vermium-sifell
On Freund
Lennart Henke
Alexander
Bas Nijholt
danbishop
Robert Van Gorkom
Jason Cheatham
Franck Nijhof
René-Marc Simard
Matt Snyder
jan iversen
Marcelo Moreira de Mello
Anton Verburg
Thibault Maekelbergh
Ziv
Jevgeni Kiski