* Display a QR code for homekit pairing
This will reduce the failure rate with HomeKit
pairing because there is less chance of entry
error.
* Add coverage
* Test that the qr code is created
* I cannot spell
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* HomeKit: Store generated aid against unique_id where possible
* Fix conflict
* Fix max accessories check
* homekit counts the bridge as an accessory
* Add coverage for aidmanager
* prepare for merge
Co-authored-by: J. Nick Koston <nick@koston.org>
* Set homekit alarm/sensor/switch state as soon as possible
This change is part of a multi-part effort to fix the
HomeKit event storms on startup.
Previously we would set the states after HomeKit
had started up which meant that when the controller
client connected it would request the states and get
a list of default states so all the initial states
would always be wrong. The defaults states generally went
unnoticed because we set the state of each HomeKit device
soon after which would result in an event storm in the log
that looked like the following for every client and every
device:
Sending event to client: ('192.168.x.x', 58410)
Sending event to client: ('192.168.x.x', 53399)
Sending event to client: ('192.168.x.x', 53399)
To solve this, we now set the state right away when we
create the entity in HomeKit, so it is correct on
initial sync, which avoids the event storm. Additionally,
we now check all states values before sending an update
to HomeKit to ensure we do not send events when nothing
has changed.
* pylint
* Fix event storm in covers as well
* fix refactoring error in security system
* cover positions, now with constants
* Fix reversed door closing/opening states in HomeKit
When we closed the door we would set state 2 which
is "Opening" it should have been 3 which is
"Closing"
When we opened the door we would set state 3 which
is "Closing" it should have been 2 which is
"Opening"
Add constants to make this easier to catch
in the future.
* Remove debug
* Add note about target door state
* Add homekit configuration option to bind to default interface
Homekit can fail to be discoverable because the
zeroconf default is to bind to all interfaces
(InterfaceChoice.All). This does not work
on some systems and (InterfaceChoice.Default) which
binds to 0.0.0.0 is needed for homekit to zeroconf
to function.
A new option is available for homekit
zeroconf_default_interface: true
* Update tests
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Review items
* has a default
* Revert "has a default"
This reverts commit 24ecf0920f.
Breaks the tests
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Add HomeKit support for slat tilting
* Reset tilt-specific attribute, not position attribute
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add explanation why we fix HomeKit's targets
We have to assume that the device has worse precision than HomeKit. If it
reports back a state that is only _close_ to HK's requested state, we'll
"fix" what HomeKit requested so that it won't appear out of sync.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add options to specify advertised IP and MAC for HomeKit Bridge
This makes use of HAP-python's new feature in version 2.6.0
that allows to specify the mDNS advertised IP and MAC address.
This is a requirement for the following use cases:
- Running Home Assistant behind a NAT, e.g. inside Docker.
- Running it on a system with multiple interfaces there
the default IP address, DNS entry and hostname diverge.
The forwarding of the required mDNS packets can be done with
an avahi-daemon based gateway, e.g. by using enable-reflector=yes.
Specifying the MAC address makes it possible to identify an
accessory in case HA is run inside a ephemeral docker container.
Whitespace changes were performed due to black and flake8.
* Update tests for HomeKit Bridge due to IP and MAC advertising
Whitespace changes were performed due to black and flake8.
* Remove the possibility to set the MAC address of the HomeKit Bridge
Since the MAC address is a random device ID, there is no need
for the user to be able to set a custom MAC address value for it.
Whitespace changes were performed due to black and flake8.
* Support binary_sensor and device_tracker for HomeKit
* Add test for get_accessory and binary sensor
* Test service.display_name and char_detected.display_name
* Split test to improve speed
* Add async timeout feature
* Decorator for setter methods to limit service calls to HA
* Changed to async
* Use async_call_later
* Use lastargs, async_add_job
* Use dict for lastargs
* Updated tests to stop patch
* Restructure
* Pincode will now be autogenerated and display using a persistence notification
* Added 'homekit.start' service
* Added config options
* Renamed files for types
* Improved tests
* Changes (based on feedback)
* Removed CONF_PIN_CODE
* Added services.yaml
* Service will only be registered if auto_start=False
* Bugfix names, changed default port
* Generate aids with zlib.adler32
* Added entity filter, minor changes
* Small changes
* Added support for security system, switch and thermostat
* Processing review
* Only perform set call when the call didn't come from HomeKit
* Added support for alarm_code
* Take into account review remarks
* Provide tests for HomeKit security systems, switches and thermostats
* Support STATE_AUTO
* Guard if state exists
* Improve support for thermostat auto mode
* Provide both high and low at the same time for home assistant
* Set default values within accepted ranges
* Added tests for auto mode
* Fix thermostat test error
* Use attributes.get instead of indexing for safety
* Avoid hardcoded attributes in tests
* Added test for temperature fahrenheit
* Restructured tests to use more mocks
* Rearanged homekit constants
* Improved 'test_homekit_class'
* Added import statements
* Fix Pylint Test errors
* Changed version of "HAP-python" to "v1.1.7"
* Updated acc file to simplify init calls
* Code refactored and '°F' temp Sensors added
* Changed call to 'HomeAccessory' and 'HomeBridge'
* Extended function of 'add_preload_service' to add additional characteristics
* Added function to override characteristic property values
* TemperatureSensor
* Added unit
* Added calc_temperature
* Updated tests
J. Nick Koston
Jc2k
Marcel Steinbach
Marc Hörsken
Paulus Schoutsen
Austin Drummond
Andreas Hartl
cdce8p
ehendrix23
Matt Schmitt
Mark Coombes
Nick Whyte
Yonsm
Phil Kates
Niklas Morberg
maxclaey