* New mqtt humidifier platform
* Add humidifier platform
* Leave out humidity step
* Use humidity in constant for payload reset
* change TARGET_HUMIDITY_RESET payload name
* _attr_max_humidity not assigned correctly
* _target_humidity_range has a zero base
* align CONF_TARGET_HUMIDITY_MIN and MAX with model
* shorter topics for humidity_range
* Converts float to int from template
* new humidifier abbreviations
* Add common module to support tests
* Add tests
* Addtional testing
* Always require target_humidity_command_topic
* Typo
* use available_modes to align entity model
* use avail_modes not modes to avoid conflict
* typo target_humidity_value_template
* Allign modes and templates with climate platform
* mode_state_template
* target_humidity_state_template
* Typo in platform name
* Remove humidity_range feature and common lib
* Update homeassistant/components/mqtt/humidifier.py
Use vol.In, not regex
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* black
* Update homeassistant/components/mqtt/humidifier.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Use round to convert float to target humidity
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Mqtt fan resetting speed percentage or preset_mode
* tests reset payload is working with val templates
* Remove duplicate line for CONF_PAYLOAD_HIGH_SPEED
* git push --all origin
* Fix percentage to ordered list conversion
* Tests for mqtt fan and fixes
* Improve tests and error handling base config
* Additional tests
* Tests completed, small fixes
* Allow preset mode and percentages combined
* Remove raise in setup and update tests
* Alignment with fan entity mode
* Fix pylint for len-as-condition
* Remove python binary cache file from PR
* Additional tests on async_turn_on and fix
* Added comments for deprecation of speeds
* Schema checks before init
* Optimize pre schema checks
* Correct schema checks
* Update homeassistant/components/mqtt/abbreviations.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Warnings for exceptions - testing speed_range
* Update homeassistant/components/mqtt/abbreviations.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
* Save with black
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add suggested_area to MQTT Discovery
This adds suggested_area to MQTT discovery, so that the discovered devices could be automatically added to the proper area.
* Add abbreviation for MQTT suggested_area
* Remove extra whitespace
* Remove extra whitespace #2
* Added tests for MQTT Dicovery of suggested_area
* Fix test for MQTT suggested_area
* Better tests of MQTT suggested_area
Changes made as per feedback from @emontnemery
* Enhance MQTT cover platform
Allow combining of position and state of MQTT cover
Add template and fix optimistic in set tilt position
Add tests
* Add abbreviations
* Add tests and stopped state
* Cleanup & fix range for templates
* Apply suggestions from code review
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Support multiple MQTT availability topics
* Make availability list and availability_topic exclusive
* Make availability list and availability_topic exclusive
* Add missing abbreviation
* MQTT Alarm Control Panel to have all available states
* MQTT Alarm Control Panel to have all available states
* test_arm_custom_bypass_* tests added
* MQTT payload_arm_custom_bypass abbreviation
* Add support for MQTT device triggers
* Fix test, tweaks
* Improve test coverage
* Address review comments, improve tests
* Tidy up exception handling
* Fix abbreviations
* Rewrite to handle update of attached triggers
* Update abbreviation test
* Refactor according to review comments
* Refactor according to review comments
* Improve trigger removal
* Further refactoring
* Added support for the opening and closing states to MQTT covers
* Processed PR feedback on MQTT cover changes
* Add missing MQTT abbreviation to fix failing tests
* Fixed typo in MQTT abbreviations
* Added mqtt set cover position optimistic test
* Update lock.py
Allow different command and state topic + different command and state values.
* Formatting updated after black run
* TC updated to reflect different state & cmd values
* Abbreviations for lock states added
* additional non-default state test
* whitespaces fixed
* black formatting run
* add ability for MQTT device tracker to map nondefault topic payloads to zones
* update new parameter name and add abbreviation
* support for payload_home, payload_not_home, and payload_custom
* use constants STATE_NOT_HOME and STATE_HOME as defaults
* reference state constants directly
* add empty dict as default for payload_custom
* change parameter name for custom mapping of payloads to non-home zones to be more descriptive
* removed 'payload_other_zones' per ballobs review
* remove abbreviation for 'payload_other_zones'
* add tests for feature
* Add missing abbreviations
* Move abbreviations to own file, add script to find missing abbreviations
* Move check from script to test case
* Lint
* Rewrite to use pathlib
* Lint
Erik Montnemery
Damien Duboeuf
Maciej Bieniek
Franck Nijhof
posixx
Jan Bouwhuis
Shay Levy
RadekHvizdos
radovanbauer
Pieter Goetschalckx
unixko
Jevgeni Kiski
Rick
Iulius
Raman Gupta