* Add Ecobee humidifier device_info and unique_id
Ecobee humidifier entity was not connected to the thermostat device.
This change will ensure the entitiy is properly connected.
This change also fills out the ecobee-data.json fixutre data a bit
to address failures in the test setup.
* Add Ecobee humidifier device_info and unique_id
Adjust test fixture data to increase pytest coverage
Clean up indenting in ecobee-data.json
* Add Ecobee humidifier device_info and unique_id
Update exception case in device_info to not
be included in codecov tests. This case has
been tested locally.
* Add Ecobee humidifier device_info and unique_id
Address pylint issue
* Add Ecobee humidifier device_info and unique_id
Remove no cover pragma and add ecobee humidifier.py to
.coveragerc
* Modern Forms integration initial pass
* cleanup of typing and nits
* Stripped PR down to Fan only
* Review cleanup
* Set sleep_time to be required for service
* Adjust minimum sleep time to one minute.
* Code review changes
* cleanup icon init a little
As of version 0.14, the venstar_colortouch lib always initializes hum_setpoint to None. When a thermostat actually reports a humidifier state, this value is replaced with the integer value of the setpoint. This changeset corrects the humidifier detection as well as adds basic test cases for the Venstar component.
* Split initialization from data retrival
* Await class initialization
* Async camera
* More async
* Remove stale code
* Clean up
* Update tests
* Fix test
* Improve error handling
* Bump pyatmo version to 5.0.0
* Add tests
* Add cloudhook test
* Increase coverage
* Add test with no camera devices
* Add test for ApiError
* Add test for timeout
* Clean up
* Catch pyatmo ApiError
* Fix PublicData
* Fix media source bug
* Increase coverage for light
* Test webhook with delayed start
* Increase coverage
* Clean up leftover data classes
* Make nonprivate
* Review comments
* Clean up stale code
* Increase cov
* Clean up code
* Code clean up
* Revert delay
* Update homeassistant/components/netatmo/climate.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address comment
* Raise cov
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Set device_class for shutters and blinds
* Add missing. imports
* Add tests for device class setting
* Clean up
* Avoid storing the node in an unused variable
* Fix entity name
* Extend qubino shutter discovery
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js support for HeatIt Z-TRM2fx
* fix docstring
* use AwesomeVersion to support firmware version ranges
* add guard against empty firmware range
* switch guard approach to raise exception sooner
* make post init more generic
* Set up firmware range schema as AwesomeVersion during initialization
* Update homeassistant/components/zwave_js/discovery.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Allow min_ver and max_ver to be None
* fix docstring
* reduce import scope
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js discovery schema for Vision Security ZL7432
* add tests
* fix test
* add correct fixture
* Make discussed changes
* fix tests
* move event handler
* fix logic to get entity ID
* add test
* make discovery test more explicit
* remove domain from event data
* always provide entity_id key to make automations easier and translate value if possible
* formatting
* comment
* dont overwrite value
* Add set_myzone service requested on forums
* Add MyZone binary sensor for climate zones
* Fixed Black on binary_sensor.py
* Add the new entity
* Fix spelling
* Test myZone value
* MyZone Binary Sensor test
* Fixed new binary sensor tests
* Fix removed dependancy
* Correct fixture
* Update homeassistant/components/advantage_air/binary_sensor.py
Co-authored-by: Philip Allgaier <philip.allgaier@gmx.de>
* Updated services.yaml to use target
Co-authored-by: Philip Allgaier <philip.allgaier@gmx.de>
* Add ClimaCell v4 API support
* fix tests
* use constants
* fix logic and update tests
* revert accidental changes and enable hourly and nowcast forecast entities in test
* use variable instead of accessing dictionary multiple times
* only grab necessary fields
* add _translate_condition method ot base class
* bump pyclimacell again to fix bug
* switch typehints back to new format
* more typehint fixes
* fix tests
* revert merge conflict change
* handle 'migration' in async_setup_entry so we don't have to bump config entry versions
* parametrize timestep test
* Add tests for Netatmo sensor
* Fix coveragerc
* Remove freezegun dependency
* Use f-strings instead of string concatenation
* Update tests/components/netatmo/test_sensor.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Address comment on config options test
* Replace deprecated call to async_get_registry()
* Fix public weather sensor update test
* Clean up
* Prevent division by zero
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add tests for Netatmo light
* Improve docstring
* Register the camera data class for the light platform
* Remove freezegun dependency
* Update tests
* Update tests/components/netatmo/test_light.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Deduplicate webhook test data
* Mock pytest to verify it is called
* Don't test internals
* Rename
* Assert light still on with erroneous event data
Co-authored-by: Erik Montnemery <erik@montnemery.com>
So far the Flo integration only supports shutoff valves. Add support for Flo leak detector pucks, which measure temperature and humidity in addition to providing leak alerts.
* add number platform to zwave_js integration
* add discovery scheme for thermostat valve control, using number platform
Co-authored-by: kpine <keith.pine@gmail.com>
* Remove unused "fibaro_fgs222" discovery hint
* Simplify multilevel switch current value discovery schema
* Force iBlinds v2.0 devices to be discovered as cover entities
* Rename discovery test file
* add thermostat fan mode and fan state support
* return when fan mode is not supported
* use get just in case
* validate state key is in states so we dont have to use get
* pylint
* Remove v4 multilevel transitional currentValue workaround
This was only needed because the get-after-set was reporting a
transitional currentValue instead of the final one.
zwave-js v6.1.1 removes the get-after-set functionality completely, so
this is no longer required (and breaks status reporting entirely)
* Fix tests to check currentValue instead of targetValue as well
* add zwave_js support for climate
* fix
* add fixture
* rename fixture
* fix variable name error
* add tests
* fix tests and handle set_temp properly based on unit
* update call being tested
* fix tests
* improve coverage
* fix docstring
* address review comments
* fix test
* update enum class name
* bump zwave-js-server-python version and assume primary_value is always set
* add additional coverage
* fix docstrings and move populating modes/presets into initialization
* attempt to address comments
* improve comment
* move mode value into a variable so its easier to iterate in the future
* dont assume mode as a discovery point
* assume all values are available when node is ready
* fix order of operations
* switch to valueerror
* use primary value
* readd property and type to discovery schema
* Add bulb 6 multi color device state fixture
* Add light test foundation
* Add no cover comment for todo code
* Update hs_color
* Test turn on light
* Test light turn off
* Fix brightness comparison
* Test setting same brightness
* Test setting same rgb color
* Test color temp update
* Test setting same color temp
* Add entity module to coverage calculation
* Fix typing
* Move Plex->Sonos playback service from integration to platform
* Test against 'native' Plex media_players
* Add Plex to Sonos after_dependencies
* Remove circular dependency
* Raise exceptions in failed service calls
* Add test to forward service call from Sonos
* Additional Sonos->Plex tests
* Fix docstring
* Run zwave_js scaffold (#44891)
* Add zwave_js basic connection to zwave server (#44904)
* add the basic connection to zwave server
* fix name
* Fix requirements
* Fix things
* Version bump dep to 0.1.2
* fix pylint
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Bump zwave-js-server-python to 0.2.0
* Use zwave js server version check instead of fetching full state (#44943)
* Use version check instead of fetching full state
* Fix tests
* Use 0.3.0
* Also catch aiohttp client errors
* Update docstring
* Lint
* Unignore zwave_js
* Add zwave_js entity discovery basics and sensor platform (#44927)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Complete zwave_js typing (#44960)
* Type discovery
* Type init
* Type entity
* Type config flow
* Type sensor
* Require typing of zwave_js
* Complete zwave_js config flow test coverage (#44955)
* Correct zwave_js sensor device class (#44968)
* Fix zwave_js KeyError on entry setup timeout (#44966)
* Bump zwave-js-server-python to 0.5.0 (#44975)
* Remove stale callback signal from zwave_js (#44994)
* Add light platform to zwave_js integration (#44974)
* add light platform
* styling fix
* fix type hint
* Fix typing
* Update homeassistant/components/zwave_js/const.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* color temp should be integer
* guard Nonetype error
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* some fixes after merging
* add additional guards for None values
* adjustments for rgb lights
* Fix typing
* Fix black
* Bump zwave-js-server-python to 0.6.0
* guard value updated log
* remove value_id lookup as its no longer needed
* fiz sending white value
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js test foundation (#44983)
* Exclude text files from codespell
* Add basic dump fixture
* Add test foundation
* Fix test after rebase
* Exclude jsonl files from codespell
* Rename fixture file type to jsonl
* Update fixture path
* Fix stale docstring
* Add controller state json fixture
* Add multisensor 6 state json fixture
* Update fixtures
* Remove basic dump fixture
* Fix fixtures after library bump
* Update codeowner
* Minor cleanup Z-Wave JS (#45021)
* Update zwave_js device_info (#45023)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Marcel van der Veldt <m.vanderveldt@outlook.com>
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Remove sensor-scaling, handled by the back-end
* Correct assert-values
* Update test-fixtures
* Revert "Correct assert-values"
This reverts commit f1a1891f73.
* Adapt value to the updated userdata set
* Link to plugwise v0.8.5, update fixtures
* Correct test-values
* Fix typo
* Bump PyTado to v0.10.0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Tado: switch to getDeviceInfo
This function has been introduced in version 0.10.0 of PyTado.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Tado: update tests
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Notifications extract from beta
* Remove info loggings
* Delete notification service
* Only notifications for right smiles
* Revert to correct logic
* Catchup with dev (mostly with ourselves from #41201)
* Remove debug logging
* Naming improvement
* Improve test quality as per codecov patch requirement
* Revert to original condition (and appropriately test)
* Fix delete_notification_service, bring tests fixtures up to 1.6.0 including notifications
* Review comment (@bouwew)
* Correct test value
* Re-apply #40108 fix after rebase sidestep
* Update tests/components/plugwise/test_init.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Add needed state to imports
* Remove separate gw unload code
* Change entry_fail approach
* Revert persistent notification part
* Revert persistent notification part - lint
* Update homeassistant/components/plugwise/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/plugwise/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Rework reuse of sensor in binary_sensor
* Explicit state attribute keys
* Remove tempfile
* List of notifications per severity
* Update homeassistant/components/plugwise/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial switch-group/stretch with failing wk_lisa_battery test
* Adding switch tests, but TypeErrors, needs more investigation
* Fixes and tests aligned
* Review updates
* Use const
* Comments
* Add stretch hostname for testing part
* Remove unused consts
* Revert guardings in line with -beta
* Catchup with dev (mostly with ourselves from #41201)
* Update docstring
* Remove debug logging
* Fix for #42725 (incorrect entity namingi)
* Fix naming for gas interval
* Add missing CONF_USERNAME and use of it
* Change "dummy" to "class"
* Don't use "class"
* Fix CONF_USERNAME default, dummy and other consts
Co-authored-by: Bouwe Westerdijk <11290930+bouwew@users.noreply.github.com>
Raman Gupta
Martin Hjelmare
Franck Nijhof
Brent Petit
Eugenio Panadero
Brian Towles
J. Nick Koston
Nash Kaminski
HighOnMikey
Joakim Sørensen
Tobias Sauerwein
Dror Eiger
Maciej Bieniek
jjlawren
Chris
Brett
treylok
Paulus Schoutsen
Álvaro Fernández Rojas
Adam Ernst
Marcel van der Veldt
kpine
Brandon Rothweiler
Jesse Campbell
Jc2k
north3221
Ian Tewksbury
SukramJ
Charles Garwood
Bouwe Westerdijk
Tom
Adam Cooper