* Changed version of "HAP-python" to "v1.1.7"
* Updated acc file to simplify init calls
* Code refactored and '°F' temp Sensors added
* Changed call to 'HomeAccessory' and 'HomeBridge'
* Extended function of 'add_preload_service' to add additional characteristics
* Added function to override characteristic property values
* TemperatureSensor
* Added unit
* Added calc_temperature
* Updated tests
* Fixes for mclimate accounts with not only melissa components
* Fixes melissa sensor to only use HVAC
* Bumping version to 1.0.3 and remove OP_MODE that is not supported
* Removes STATE_AUTO from translation and tests
* [WIP] Allow ignoring call service events
This allows a setting a configuration value (False by default to continue the current behavior) which will ignore call service events.
* extra spaces
removed them
* updates from PR review
* removed print
* update spacing
* updated allowed events to allow for custom events, and included some tests
* hound fixes
* Remove unused constant
* Lint
* Adds folder sensor
The state of the sensor is the time that the most recently modified
file in a folder was modified.
* Address lint errors
* Edit docstrings
Makes the recommended edits to docstrings
* Update .coveragerc
Add sensor/folder.py
* Update folder.py
* Address requests
Address requests changes
* Adds folder
* Adds test, tidy up
* Tidy
* Update test_folder.py
* Update folder.py
* Fix setup
Fix setup with else statement
* Update folder.py
* Update folder.py
* Remove list of files from attributes
* Update test_folder.py
* Update folder.py
* Update test_folder.py
* Update folder.py
* Update folder.py
* Basic Homekit support
* Added Temperatur Sensor
* Added Window Cover
* Code refactored
* Added class HomeAccessory(Accessory)
* Added class HomeBridge(Bridge)
* Changed homekit imports to relative, to enable use in custom_components
* Updated requirements
* Added docs
* Other smaller changes
* Changed Homekit from entity to class
* Changes based on feedback
* Updated config schema
* Add only covers that support set_cover_position
* Addressed comments, updated to pyhap==1.1.5
* For lint: added files to gen_requirements_all
* Added codeowner
* Small change to Wrapper classes
* Moved imports to import_types, small changes
* Small changes, added tests
* Homekit class: removed add_accessory since it's already covered by pyhap
* Added test requirement: HAP-python
* Added test suit for homekit setup and interaction between HA and pyhap
* Added test suit for get_accessories function
* Test bugfix
* Added validate pincode, tests for cover and sensor types
* Rework Sonos media player platform for push
* Ignore play_mode from events where it is missing
* Remove unused preload helper
* Freeze SoCo version
* Updates for entity registry
* Add codeowner
* Use real soco release
It turns out I misunderstood which media_player services are available
when a media player supports StepVolume. This PR maps the Alexa
StepSpeaker messages to the volume_up and volume_down services.
Currently Alexa allows you to specify the number of steps but the media
player volume_up and volume_down services don't support this. For now I
just look to see if the steps are +/- and call up/down accordingly.
* 🐎 Async WUnderground
* ∞ Them lines be too long
* Fix pylint warnings
* Changes according to comments
* Remove STATE_UNKNOWN
* 🔬 Fix tests
* Improve tests
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* Fix MQTT retained message not being re-dispatched
* Fix tests
* Use paho-mqtt for retained messages
* Improve code style
* Store list of subscribers
* Fix lint error
* Adhere to Home Assistant's logging standard
"Try to avoid brackets and additional quotes around the output to make it easier for users to parse the log."
- https://home-assistant.io/developers/development_guidelines/
* Add reconnect tests
* Fix lint error
* Introduce Subscription
Tests still need to be updated
* Use namedtuple for MQTT messages
... And fix issues
Accessing the config manually at runtime isn't ideal
* Fix MQTT __init__.py tests
* Updated usage of Mocks
* Moved tests that were testing subscriptions out of the MQTTComponent test, because of how mock.patch was used
* Adjusted the remaining tests for the MQTT clients new behavior - e.g. self.progress was removed
* Updated the async_fire_mqtt_message helper
* ✅ Update MQTT tests
* Re-introduce the MQTT subscriptions through the dispatcher for tests - quite ugly though... 🚧
* Update fixtures to use our new MQTT mock 🎨
* 📝 Update base code according to comments
* 🔨 Adjust MQTT test base
* 🔨 Update other MQTT tests
* 🍎 Fix carriage return in source files
Apparently test_mqtt_json.py and test_mqtt_template.py were written on Windows. In order to not mess up the diff, I'll just redo the carriage return.
* 🎨 Remove unused import
* 📝 Remove fire_mqtt_client_message
* 🐛 Fix using python 3.6 method
What's very interesting is that 3.4 didn't fail on travis...
* 🐛 Fix using assert directly
* Add a processing queue to influxdb
* Updates after reviews
* Remove lint
* Move retry loop to thread class
* Move constant calculation out of loop
* Deprecate retry_queue_limit
* fix generic_thermostat bug when restore state from HA start up
if you don't set "initial_operation_mode" in config, you will get
`self._enabled = True` when init GenericThermostat. And then you will
miss the `if self._current_operation != STATE_OFF` statement and the
self._enabled still keep `True`. That's the problem
* add a test to describe the restore case
* make port mapping optional
* dependencies + improvements
* Added bytes and packets sensors from IGD
* flake8 check
* new sensor with upnp counters
* checks
* whitespaces in blank line
* requirements update
* added sensor.upnp to .coveragerc
* downgrade miniupnpc
Latest version of miniupnpc is 2.0, but pypi only has 1.9
Fortunately it is enough
* revert to non async
miniupnpc will do network calls, so this component can’t be moved to
coroutine
* hof hof
forgot to remove import ot asyncio
* Add baudrate option
* merge
* Added Mediaroom media_player component
* Updated header
Works with MEO and VDF set-top boxes in Portugal
* formatting
* Development Checklist (done)
* fix formatting according to houndci-bot
* more format fixing (tks houndci-bot)
* more fixes
* too much cleanup...
* too much
* pylint check
* Initial commit
Basic configuration testing
* flake8 and lint
* Fixing demo platform to use support_flags
* Fixed tests as well
* Moved humidity low / high as always available based on defaults
* Updated demo platform to show more combinations
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* google_assistant: Refactor query_device
The previous code had issues where domains could break out and end up
with weird brightness values and we weren't enforcing the `on` and
`oneline` keys in the response.
* google_assistant: Add media_player to query test
* Refactor alexa smart_home tests
The previous tests had a lot of copy pasta due to a lack of expressions
for higher-level assertions. I'm hoping this makes it more reasonable to
extend all interfaces to support properties.
* Lint
* Refactor Alexa Smart Home API
Having an object per interface will make it easier to support
properties.
Ideally, properties are reported in context in all responses. However
current implementation reports them only in response to a ReportState
request. This seems to work sufficiently. As long as the device is
opened in the Alexa app, Amazon will poll the device state every few
seconds with a ReportState request.
* Report properties for some Alexa interfaces
Fixes (mostly) #11874.
Other interfaces will need properties implemented as well.
Implementing properties for just PowerController seems sufficient to
eliminate the "There was a problem." error for any device that supports
it, even if other interfaces are supported. Of course the additional
properties will be reported incorrectly in the Alexa app.
Includes a minor bugfix: `reportable` was previously placed incorrectly
in the responses, so Amazon was ignoring it.
Having an object per interface will make it easier to support
properties.
Ideally, properties are reported in context in all responses. However
current implementation reports them only in response to a ReportState
request. This seems to work sufficiently. As long as the device is
opened in the Alexa app, Amazon will poll the device state every few
seconds with a ReportState request.
* Fixed Canary temperature sensor and remapped air quality value
* Addressed review comment
* - Fixed canary tests and added more tests
- Removed py-canary requirements from tests
* Noop to trigger a build again
* - Removed py-canary requirements from tests
* Addressed PR comment
* - Updated tests
- Removed py-canary from gen_requirements_all.py
* - Fixed hound violation
* Added back py-canary to gen_requirements_all.py as it's still need in tests
* Added back py-canary to test requirements as it's still need in tests
* Address PR comment
* Send Alexa Smart Home responses to debug log
* Report scripts and groups as scenes to Alexa
The Alexa API docs have a couple display categories that sound relevant
to scenes or scripts:
ACTIVITY_TRIGGER: Describes a combination of devices set to a
specific state, when the state change must occur in a specific
order. For example, a “watch Neflix” scene might require the: 1. TV
to be powered on & 2. Input set to HDMI1.
SCENE_TRIGGER: Describes a combination of devices set to a specific
state, when the order of the state change is not important. For
example a bedtime scene might include turning off lights and
lowering the thermostat, but the order is unimportant.
Additionally, Alexa has a notion of scenes that support deactivation.
This is a natural fit for groups, and scripts with delays which can be
cancelled.
https://developer.amazon.com/docs/device-apis/alexa-discovery.html#display-categories
The mechanism to map entities to the Alexa Discovery response is
refactored since extending the data structures in MAPPING_COMPONENT to
implement supportsDeactivation would have added complication to what I
already found to be a confusing construct.
* Release worker thread while waiting for Z-wave startup
* Increase zwave startup timeout
* Adjust test
* Use asyncio.sleep in _check_awaked
* Remove lint
* Name loop parameter
* Expose Alexa Smart Home via HTTP POST
Haaska uses the deprecated v2 Alexa Smart Home payload. Exposing the v3
implementation this way allows an easy path to upgrading Haaska and
reducing code duplication with Home Assistant Cloud.
* Expose Alexa Smart Home via HTTP POST
Haaska uses the deprecated v2 Alexa Smart Home payload. Exposing the v3
implementation this way allows an easy path to upgrading Haaska and
reducing code duplication with Home Assistant Cloud.
In local testing py36 always fails on test_minimal_config on a wait
call that never completes. One difference between this test and others
in the class is the lack of a mock on `call`. With this added, the
test passes locally 100%.
* Allow exposing sensors as temperature or humidity as 'climate' to Google Assistant
* Fixed hound
* Fixed hound
* Handled correctly unit of measurement to fix humidity
* Fixed temperature conversion for Google climate components
* Fixed temperature conversion for Google climate components
* Fixed indentation
* Fixed hound
* Fixed tests
* Fixed conversion and unit tests
* Fix sync for custom unit temperature
* Implemented requested changes
* Fix hound
* Fix linting errors
* Added success tests for sensors as climate
* Fix lint errors
* Change 'on' to 'heat' as fallback thermostat mode
'on' isn't recognised as a mode by Google Assistant, rather is used as a method to return a thermostat to a previous mode. In the case where a thermostat doesn't support the standard google modes (e.g. A homematic radiator thermostat) this means the set_temperature doesn't get returned to the user on a request.
* Update test_google_assistant.py
* Make Google TTS secure
I noticed that my TTS queries were showing up in the log on my router, so I was curious if there was a way to make it secure. A quick search showed people using https instead of http (https://stackoverflow.com/questions/32053442/google-translate-tts-api-blocked), so I figure that should work. I am using hass.io, so I'm not actually sure how to test this, but its a pretty simple change.
* Fix the tts test.
* Added option to create a group for the plant and all of it's sensors so that they appear together in the UI
* fixed warnings from the hound
* added check for min_brightness over several days
* fixed hound complaints
* 1) added missing dependency on recorder
2) using group.Group instead of hass.states.async_set as requested by @pvizeli
* fixed pylint error in docstring
* changed the way the groups are created
* fixed requirements issue
* Changed the way the groups are implemented. This is proposal number 4...
* Data read from recorder only on startup.
We now only store one data point per day. If a recorder is configured, this data is initialized from the database. If not the list is empty on startup.
* added missing documentation
* fixed typo in comment
* removed group fature
* added group dependency since it's still needed
* fixed bug: now "None" is no longer added to the DailyHistory
* now also outputting unit of measurement if defined by the sensors
* removed iconss
* fixed line length
* Implemented changes requested in code reviews.
These changes affect the interface to the UI:
* renamed attribute for units of measurement to "unit_of_measurement_dict"
* renamed attribute for maximum in brightness history to "max_brightness"
* only loading the history if a brightness sensor was configured
* fixed testcase
* fixed stupid bug in check of brightness history
Also added test for this bug
* added missing docstring
* Fixed sporadic failure in test case.
Sometimes the component was created before the data was stored in the history. This lead to an empty history being read.
* removed unused import statement in testcase
* reverted change to test case
* Changed startup behavior of the component.
No failed tests after 20 local test runs.
* added missing docstring
* fixed tests
* added hass.start() to Setup
* fixed call parameters in constructor
* added time.sleep
* removed sleep
* fixed typo in variable name
* disabled loading from database as it's not stable at the moment and nobody knows why :(
* fixed flake8
* now using pytest.mark.skipif to skip test
* Add 'last' type to min/max sensor
Now supports types: min, max, mean, last
'last' is the most recently received value from all tracked entities.
* Min/max sensor 'last' type test
* Fix min/max sensor 'last' test
* Use bluetooth_le source_type, if location was changed by beacon
* No reason to do nested ifs
* Added tests for source_type on owntracks
* Fixed The Hound
* Added test and fixed bug surfaced by test
* Added snips.say and snips.say_action services
* Added snips.say and snips.say_action services
* Merged services.yaml changes I missed
* added tests for new service configs
* Woof
* Woof Woof
* Changed attribute names to follow hass standards.
* updated test_snips with new attribute names
* Changed device type of media player and cover to switch
Covers and media players should not be of device type 'light'. Example: If user requests all lights to switch to off, covers are closed and media players are affected too.
* Fix test
* Connection to mochad occasionally stalls on RPi and CM19A. Reconnect one switch send command.
* Formatting and exception hanling fixes
* Moved import inside the method. Logging outside the try-catch.
* Tailing whitespaces.
* MockDependency on pymochad in unit tests to resolve exceptions
* patch pymochad MochadException in unit tests to resolve exceptions
* patch pymochad MochadException in unit tests to resolve exceptions
* cleaned unused import
* lint issue fixed
* pylint issue fixed
* New features for Owntracks device_tracker
- Supporting a mapping of region names in OT to zones in HA, allowing
separate namespaces in both applications. This is especially helpful
if using one OT instance to update geofences for multiple homes.
- Creating a setting to ignore all location updates, allowing users to
rely completely on enter and leave events. I have personally always
used OT integrations with home automation this way and find it the
most reliable.
- Allowing the OT topic to be overridden in configuration
* Fixing configuration of MQTT topic, related tests
* Tests for Owntracks events_only feature
* Tests for customizing mqtt topic, region mapping
* Fixing _parse and http for owntracks custom topic
* Making tests more thorough and cleaning up lint
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Fix time functions would throw errors in python scripts
* Added unit test for time.strptime, change variable name to satisfy lint
* Added docstring for time attribute wrapper method to satisfy lint
* Fixed line too long lint problem
* Don't duplicate html5 registrations
If a registration is posted and another registration with the same
endpoint URL exists, update that one instead. That way, we preserve
the device name that has been configured. The previous behavior used to
append 'unnamed device' registrations over and over, leading to
multiple copies of the same registration. The endpoint URL is unique per
service worker so it is safe to update matching registrations.
* Refactor html5 registration view to not write json in the event loop
* Updated generic thermostat to respect operation_mode and added away mode
* Updated tests to include away mode and corrected init problem for sensor state
Added more tests to improve coverage and corrected again lint errors
Fixed new test by moving to correct package
Fixed bug not restoring away mode on restart
* Added support for idle on interface through state
* Added back initial_operation_mode and modified away_temp to be only one for now
* Fixed houndci-bot errors
* Added back check for None on restore temperature
* Fixed failing tests as well
* Removed unused definitions from tests
* Added use case for no initial temperature and no previously saved temperature
* Do not leave remember the milk config file behind
* Fix exception in service causing service timeout
* Change max service timeout to 9 to catch services timing out
* Fix Google Sync service test
* Update and pin test requirements
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
* Remember the Milk - updating and completing tasks
Added new feature so that tasks can be updated and completed.
For this feature a task id must be set when creating the task.
* fixed hould complaints
* fixed review comments by @MartinHjelmare
* removed unnecessary check as proposed by @MartinHjelmare
* Use different colour channel intensities in tests
Uses a different value for each colour channel in MQTT light tests to
properly differentiate between colour channels.
* Correct ordering of RGB channels in MQTT light
* alexa: Add handling for covers
Covers don't support either cover.turn_on or homeassistant.turn_on so
use cover.[open|close]_cover.
* alexa: Add tests for covers
* Improve support for multiple Hue bridges with lights that have the same id.
The old code pre-refactoring kept a per-bridge list of lights in a closure; my refactoring moved that to hass.data, which is convenient but caused them to conflict with each other.
Fixes#11183
* Update test_hue.py
* added functionality to save/restore snapshots to monoprice platform
* renamed monoprice_snapshot, monoprice_restore to snapshot, restore
This is to simplify refactoring of snapshot/restore functionality for monoprice, snapcast and sonos in the future
* Extend Threshold binary sensor to support ranges
- Adds support for ranges
- Threshold type (lower, upper, range) is defined by supplied
thresholds (lower, upper)
- Adds verbose status/position relative to threshold as attribute
(position)
* Minor changes (ordering, names, etc.)
* Update name
* Update name
* Fix statistics sensor mean and median when only one sample is available.
With only one data point stddev and variance throw an exception.
This would clear the (valid) mean and median calculations.
Separate the try..catch blocks for one-or-more and two-or-more stats so
that this doesn't happen.
Test this with a new sampling_size_1 test.
* test_statistics trivial whitespace fix
Sonos Playbar and Playbase devices support Night Sound and Speech Enhancement
effects when playing from sources such as a TV. Adds a new service "sonos_set_option"
whichs accepts boolean options to control these audio features.
* Fix X10 commands for mochad light turn on
This commit attempts to address issues that a lot of people are having
with the x10 light component. Originally this was written to use the
xdim (extended dim) X10 command. However, not every X10 dimmer device
supports the xdim command. Additionally, it turns out the number of
dim/brighness levels the X10 device supports is device specific and
there is no way to detect this (given the mostly 1 way nature of X10)
To address these issues, this commit removes the usage of xdim and
instead relies on using the 'on' command and the 'dim' command. This
should work on all x10 light devices. In an attempt to address the
different dim/brightness levels supported by different devices this
commit also adds a new optional config value, 'brightness_levels', to
specify if it's either 32, 64, or 256. By default 32 levels are used
as this is the normal case and what is documented by mochad.
Fixes#8943
* make code more readable
* fix style
* fix lint
* fix tests
* Introduce a new Hue component that knows how to talk to a Hue bridge, but doesn't actually set up lights.
* Refactor the hue lights platform to use the HueBridge class from the hue component.
* Reimplement support for multiple bridges
* Auto discover bridges.
* Provide some migration support by showing a persistent notification.
* Address most feedback from code review.
* Call load_platform from inside HueBridge.setup passing the bridge id.
Not only this looks nicer, but it also nicely solves additional bridges being added after initial setup (e.g. pairing a second bridge should work now, I believe it required a restart before).
* Add a unit test for hue_activate_scene
* Address feedback from code review.
* After feedback from @andrey-git I was able to find a way to not import phue in tests, yay!
* Inject a mock phue in a couple of places
* Updated snips to listen on new mqtt topic and use rawValue if value not present in slot
* Too late at night
* Trying to make minor changes via web
* Update test_snips.py
* Update __init__.py
* Updated wrong branch cause I'm a monkey
* Add Canary component
* Made some change to how canary data is updated and stored
* Updated to use py-canary:0.1.2
* Addressed flake8 warnings
* Import canary API locally
* Import canary API locally again
* Addressed pylint errors
* Updated requirements_all.txt
* Fixed incorrect unit of measurement for air quality sensor
* Added tests for Canary component and sensors
* Updated canary component to handle exception better when initializing
* Fixed tests
* Fixed tests again
* Addressed review comments
* Fixed houndci error
* Addressed comment about camera force update
* Addressed comment regarding timeout when fetching camera image
* Updated to use py-canary==0.2.2
* Increased update frequency to 30 seconds
* Added support for Canary alarm control panel
* Address review comments
* Fixed houndci error
* Fixed lint errors
* Updated test to only test setup component / platform
* Fixed flake error
* Fixed failing test
* Uptake py-canary:0.2.3
* canary.alarm_control_panel DISARM is now mapped to canary PRIVACY mode
* Fixed failing tests
* Removed unnecessary methods
* Removed polling in canary camera component and update camera info when getting camera image
* Added more tests to cover Canary sensors
* Address review comments
* Addressed review comment in tests
* Fixed pylint errors
* Excluded canary alarm_control_panel and camera from coverage calculation
* initial commit of shuffle option for sonos
* added test
* Small adjustments to adhere to review requests
* Removed unnessesary setting of variable. Use shuffle state from soco instead
* Device tracker for meraki AP
* styles fix
* fix again
* again
* and again :)
* fix hide if away
* docs and optimization
* tests and fixes
* styles
* styles
* styles
* styles
* styles fix. Hope last
* clear track new
* changes
* fix accuracy error and requested changes
* remove meraki from .coveragerc
* tests and minor changes
* remove location
* Generic thermostat restore operation mode
* Test restore operation mode
* Fix trailing whitespace
* Fix line too long
* Fix test duplicate entity_id
* Fix test
* async_added_to_hass modify modify internal state
* Test inital_operation_mode
* More restore state tests
* Fix whitespace
* fix test_custom_setup_param
* Test "None" target temp
* Added min and Events sensor types to prometheus
* Updated prometheus client and fixed invalid swith state
* Added metric to count number of times an automation is triggered
* Removed assumption that may not apply to everybody
* Fixed tests
* Updated requirements_test_all
* Fixed unit tests
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* sensor.envirophat: add missing requirement (#7451)
Adding requirements that is not explicitly pulled in by the library
that manages the Enviro pHAT.
* PyPI Openzwave (#7415)
* Remove default zwave config path
PYOZW now has much more comprehensive default handling for the config
path (in src-lib/libopenzwave/libopenzwave.pyx:getConfig()). It looks in
the same place we were looking, plus _many_ more. It will certainly do a
much better job of finding the config files than we will (and will be
updated as the library is changed, so we don't end up chasing it). The
getConfig() method has been there for a while, but was subsntially
improved recently.
This change simply leaves the config_path as None if it is not
specified, which will trigger the default handling in PYOZW.
* Install python-openzwave from PyPI
As of version 0.4, python-openzwave supports installation from PyPI,
which means we can use our 'normal' dependency management tooling to
install it. Yay.
This uses the default 'embed' build (which goes and downloads
statically sources to avoid having to compile anything locally). Check
out the python-openzwave readme for more details.
* Add python-openzwave deps to .travis.yml
Python OpenZwave require the libudev headers to build. This adds the
libudev-dev package to Travis runs via the 'apt' addon for Travis.
Thanks to @MartinHjelmare for this fix.
* Update docker build for PyPI openzwave
Now that PYOZW can be install from PyPI, the docker image build process
can be simplified to remove the explicit compilation of PYOZW.
* Add datadog component (#7158)
* Add datadog component
* Improve test_invalid_config datadog test
* Use assert_setup_component for test setup
* Fix object type for default KNX port
#7429 describes a TypeError that is raised if the port is omitted in the config for the KNX component (integer is required (got type str)). This commit changes the default port from a string to an integer. I expect this will resolve that issue...
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Fixed breaks cause by manual upstream merge.
* Added one extra blank line to make PyLint happy.
* Switched json_attributes to be a list of keys rather than a boolean.
The value of json_attributes can now be either a comma sepaated list
of key names or a YAML list of key names. Only matching keys in a
retuned JSON dictionary will be mapped to sensor attributes.
Updated test cases to handle json_attributes being a list.
Also fixed two minor issues arrising from manual merge with 0.58 master.
* Added an explicit default value to the json_attributes config entry.
* Removed self.update() from __init__() body.
* Expended unit tests for error cases of json_attributes processing.
* Align quotes
* vacuum.xiaomi_miio: read dnd status properly instead of using imprecise dnd flag from vacuum_state
* vacuum.xiaomi_miio: use miio package instead of mirobo
* check only that wanted calls have taken place, ignore order of calls
* Fix linting issues
* Remove empty line after docstring
* Bugfix trigger state with multible entities
* Fix numeric state
* fix lint
* fix dict
* fix unsub
* fix logic
* fix name
* fix new logic
* add test for state
* add numeric state test for unsub
* add test for multible entities
* Update numeric_state.py
* Update numeric_state.py
* Update state.py
* Fix logic for triple match
* Add clear to numeric state
* clear for state trigger
* Implement supported_features for the climate component
* Test supported features
* Convert generic thermostat to supported features
* Max / min temperature are not features
* Fix lint
* Min / max humidity are not features
* Linting
* Remove current temperature / humidity
* Move c-hacker-style constants to boring integers. Booo!
* Refactor all the climate platforms to use the new supported_features
* Force all climate platforms to implement supported_features
* Fix mistakes
* Adapt hive platform
* Move flags into a constant
* Calm the hound
* Fixed aliases warning message
* Fixed test cases
* Changing handling for google_assistant groups to treat them as lights - amending to include user info.
* Enable brightness, RGB, etc for groups in Google Assistant
* Revert color/hue/temp settings
* Change servce from light to homeassistant
* Fixed config_units
* Convert from light to switch
* Change group to switch
* Update tests to switch instead of light for group
* system_log improvements
* Don't use ModuleNotFoundError which is 3.6+
* Don't use FrameSummary which was added in 3.5
* Don't trace stack for exception logs
* Handle test error in Python 3.4
* Make shell_command async
Use `asyncio.subprocess` instead of `subprocess` to make the
`shell_command` component async.
Was able to migrate over existing component and tests without too many
drastic changes.
Retrieving stdout and stderr paves the way for possibly using these in
future feature enhancements.
* Remove trailing comma
* Fix lint errors
* Try to get rid of syntaxerror
* Ignore spurious pylint error
* Implement data write retry for InfluxDB
This adds an optional max_retries parameter to the InfluxDB component
to specify if and how often the component should try to send the data
if the connection failed due to an IOError.
The sending will be scheduled for a retry in 20 seconds as often as the
user specified. This can be handy for flaky getwork connections between
the DB and Homeassistant or outages like daily DSL reconnects.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add unittest for influx write retries
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add RetryOnError as helper decorator in util
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add unittests for RetryOnError
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Use RetryOnError decorator in InfluxDB
This replaces the scheduling logic in the InfluxDB component with the
RetryOnError decorator from homeassistant.util
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Make the linters happy
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Implement a queue limit for the retry decorator.
This adds a queue limit to the RetryOnError handler. It limits the
number of calls waiting for be retried. If this number is exceeded,
every new call will discard the oldest one in the queue.
* influxdb: Add the retry queue limit option.
* Make the linter happy.
* Make pylint happy
* Log exception of dropped retry
* Move RetryOnError decorator to influxdb component.
* Fix bug in logging usage
* Fix imports
* Add newlines at the end of files.
* Remove blank line
* Remove blank line
* Refactored to new global json saving and loading
* Fixed emulated_hue tests
* Removed unnecassary error handling
* Added missing newline
* Remove unused imports
* Fixed linting error
* Moved _load_json wrapper out of the config class
* test the facebook notification component
* respond to hound feedback
* remove unnecessary line breaks
* parse_qs not needed with requests_mock
* remove facebook notifier from .coveragerc
* Implement entity and domain exclude/include for Alexa
* Switch to using generate_filter
* Use proper domain for turn on/off calls except for groups where we must use the generic homeassistant.turn_on/off
* travis fixes
* Untangle
* Lint
* Initial scene support
* Initial fan support
* ordering
* Initial lock support
* Scenes cant be deactivated; Correct the scene display category
* Initial input_boolean support
* Support customization of Alexa discovered entities
* Initial media player support
* Add input_boolean to tests
* Add play/pause/stop/next/previous to media player
* Add missing functions and pylint
* Set manufacturerName to Home Assistant since the value is displayed in app
* Add scene test
* Add fan tests
* Add lock test
* Fix volume logic
* Add volume tests
* settup -> setup
* Remove unused variable
* Set required scene description as per docs
* Allow setting scene category (ACTIVITY_TRIGGER/SCENE_TRIGGER)
* Add alert, automation and group support/tests
* Change display categories to match docs
* simplify down the display category props into a single prop which can be used on any entity
* Fix tests to expect proper display categories
* Add cover support
* sort things
* Use generic homeassistant domain for turn on/off
* Added logic to the alexa component for handling slot synonyms
* Moved note with long url to the top of the file
* Just made a tiny url instead of messing with Flake8
* Refactored to be more Pythonic
* Put trailing comma back
* add support for color temperature and color; also add some extra deviceInfo attributes
* change so that default behaviour doesn't turn off device if the action isn't handled
* add tests
* fix lint
* more lint
* use attributes were applicable
* removed debug logging
* fix unassigned if only None returned
* report more data in QUERY
* better tests for color and temperature
* fixes after dev merge
* remove deviceInfo as not part of a device state (PR #10399)
* fix after merge
* Implementation of `state_template` for the Universal media_player
* add tracking to entities in state template
* use normal config_validation
* fix tests, use defaults in platform schema, remove extra keys
* and test the new option `state_template`
* lint fixes
* no need to check attributes against None
* use `async_added_to_hass` and call `async_track_state_change` from `hass.helpers`
cdce8p
Paulus Schoutsen
Robin
Otto Winter
kennedyshead
Mike Megally
Pascal Vizeli
Anders Melchiorsen
bottomquark
Richard Lucas
Andrey
Mike O'Driscoll
Albert Lee
NovapaX
Tod Schmidt
Rene Nulsch
escoand
Eu
mkfink
Diogo Gomes
Dan Nixon
tadly
hawk259
ruohan.chen
Gerben Meijer
Marius
Ville Skyttä
Pierre Ståhl
Phil Kates
Phil Frost
Otto Winter
Jack Wilsdon
Joe Lu
Gregory Dosh
Sean Dague
Frantz
andrewdolphin
Fabian Affolter
Paul Rabahy
ChristianKuehnel
markferry
Conrad Juhl Andersen
iliketoprogram14
Lukas Barth
Jason Kölker
Adam Mills
cgtobi
Laqoore
randellhodges
Andrea Campi
timstanley1985
Alex Osadchyy
Chris Cowart
Tom Waters
Christopher Viel
Thibault Cohen
Dave Finlay
NotoriousBDG
Kane610
Derek Brooks
Mitko Masarliev
Daniel Watkins
maxlaverse
Egor Tsinko
Brad Dixon
Przemek Więch
Matthew Treinish
Andrey Kupreychik
Marcus Schmidt
ziotibia81
Brent Hughes
Nicko van Someren
Paolo Bonzini
Teemu R
Per Osbäck
Zach
Milan V
uchagani
Nathan Henrie
Jan Losinski
Markus Nigbur
PeteBa
Robbie Trencheny
William Scanlon
Cezar Sá Espinola
Corey Pauley
Colin Dunn
boltgolt
Michael Chang
Eitan Mosenkis
Eugenio Panadero
Kenny Millington