* Refactor / update Awair integration
This commit does a few things, all in service of making the Awair
integration more modern and reliable. Specifically we do the following:
- Update to python_awair 0.1.1
- Begin using config entries / flow for setting up the integration.
- YAML support is completely removed.
- The integration now allows adding multiple Awair accounts, should a
user wish to do so (I found it _very_ useful in development).
- Group various Awair sensors into devices, using the device registry.
- Renames various sensors and treats the "dust" sensor as a particulate sensor.
- Device update rate-limits are no longer dynamically calculated; the
Awair API now separates rate-limits on a per-device basis.
- Supports sound pressure and illuminance sensors found on some Awair devices.
- We report the "awair index" for certain sensors as part of device_state_attributes.
The "index" is a subjective measure of whether or not a sensor reading
is "good" or "bad" (and to what extent). It's a component of the Awair
score, and it is useful on its own as an input for those who wish to
do things like "display this color if the value is 'bad'".
This is a breaking change, and requires updates to documentation and a
warning in the README. The breaking changes in detail, are:
- Support for all YAML configuration is removed, and users will need to
re-add the integration via the UI.
- We no longer support overriding device discovery via manual
configuration of device UUIDs. This was previously supported because
the Awair API had severe limits on the device list endpoints; however
those have since been removed.
- Gen 1 devices no longer show a "dust" sensor; rather we create a PM2.5
sensor and a PM10 sensor and just keep the values in sync. This better
reflects the sensor capabilities: it can detect particles in a range
from 2.5 -> 10, but cannot differentiate between sizes.
- Sensors are renamed as follows:
- "sensor.devicename_co2" -> "sensor.devicename_carbon_dioxide"
- "sensor.devicename_voc" -> "sensor.devicename_volatile_organic_compounds"
- "sensor.devicename_score" -> "sensor.devicename_air_quality_index"
- I've chosen to call the "Awair Score" an "air quality index" sensor,
because fundamentally the "Awair Score" and other air quality indices
(such as CAQI) do the same thing: they calculate a value based on a
variety of other inputs.
Under the hood, the integration has seen some improvements:
- We use the DataUpdateCoordinator class to handle updates, rather than
rolling our own update class.
- The code no longer tracks availability based on a timestamp returned
from the Awair service; we assert that if we have received a response
and the response has data for our device, then we are available (and
otherwise, not available). We don't need to test the actual Awair API
so heavily.
- Test coverage has been expanded to handle a variety of products that
Awair produces, not just the one I happen to own.
- Test coverage no longer concerns itself with testing behavior that is
now handled by the DataUpdateCoordinator; nor is it concerned with
ensuring that the overall component sets up and registers properly.
These are assumed to be well-tested functionaity of the core and not
things we need to re-test ourselves.
Finally - between library updates and integration updates, this
integration is well-positioned to support future updates. I have a
proof-of-concept patch for device automations, and the underlying
library now supports subclassing authentication (which clears the way
for us to use OAuth authentication for Awair).
* Wrap test fixture in mock_coro
Truthfully I'm not sure why this was passing on my local dev
environment, but I was developing with python 3.8 before. After
installing python 3.7, I was able to reproduce the CI failures and fix
them.
* Fix broken tests after #34901 and/or #34989
* Do not rename sensors so broadly
We're going to keep the sensors named as they were before, pending the
outcome of any decisions around the air_quality component and what names
should be standardized for air-quality-like devices.
If standardized names are selected (which does seem likely), then we
will update this integration to match them - at which point, it would be
a breaking change.
But for now, we'll keep names mostly identical to what users had before.
Notable in this commit is that we generate the entity_id ourselves,
rather than just allowing it to be auto-generated from the name
attribute. This allows us to provide more human friendly names, while
keeping the old format for entity ids. For example, given an Awair
device called "Living Room", we'll generate an entity id of
"sensor.living_room_voc" but show set the name of the device to "Living
Room Volatile organic compounds".
* Support import from config.yaml
We'll create a config entry from config.yaml the first time we're
loaded, and then defer to it from then on.
We ignore all keys other than the access_token, since we no longer need
to deal with per-account rate-limits (rather, everything is per-device
now).
* Add myself to CODEOWNERS
Since I wrote the initial integration, and now this re-write, it feels
appropriate for me to take care of the integration along with `danielsjf`.
* Remove name mangling
* Update homeassistant/components/awair/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address some review feedback
* Set up reauth flow in a job, rather than awaiting
* Remove unnecessary title string
* Remove unnecessary config schema checking
As pointed out in review, because this comes in via import from
`configuration.yaml`, we can rely on the `PLATFORM_SCHEMA` validation instead.
* Fix tests
* Set unique_id appropriately for legacy devices
For users who have had this integration already installed (and who have
updated their home assistant installation sometime in recent history),
we want to ensure that unique_id's are set to the same thing as before,
to facilitate the upgrade process.
To do that, we add an additional property to the `SENSOR_TYPES` dict
(`ATTR_UNIQUE_ID`) which allows us to map modern sensor names from
python_awair to what older versions called them - ie: `humidity` ->
`HUMID`. We then use that value when constructing the unique ID. This
should allow users to upgrade and not lose configuration even if entity
IDs would otherwise change (because we have changed the name format that
generates entity IDs).
One note is that for the gen1 `DUST` sensor, we have to treat it
differently. This integration used to call that a "PM2.5" sensor, but
the unique_id generated would be something like `awair_12345_DUST`. So
we special-case that sensor, and do the same thing. We do not need to
special-case the PM10 sensor for gen1 devices, because we didn't create
a PM10 sensor in the past (we do now, because the "DUST" sensor is
really a hybrid PM2.5/PM10 sensor).
* Patch async_setup_entry for two tests
* Update awair config_flow to require / use an email address for unique_id
Also, only start one re-auth flow.
* Add a few more tests, try to get coverage up.
* Add another test
* Move attribution to device_state_attributes
* Don't require email
* Switch from Union[dict, None] to Optional[dict]
* Use a mock where requested
* Fix missing constant rename
* Use async_create_task
* Bump test coverage a bit for config_flow
* s/CONF_UNIQUE_ID/UNIQUE_ID/g
* Add warning about deprecated platform config
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Allow activity change on start of switch
Allow activity to be updated when a switch to a new activity is initiated instead of when it is completed.
* Updates based on feedback
Some items are not required to be done as YAML is not used anymore.
Cleaned-up some code.
* Fix for change on how to set callbacks
How callbacks are set now one has to set the new_activity and new_activity_starting as well, even just with None.
* Added callback update
Added so that when it is changed in the UI the callbacks will be changed as well.
* Added test cases for notify setting
Added test cases for config flow to test new setting for activity notifications.
* Vera now polls for all status data, no only incremental.
Vera polling is not handled using hass event loops with proper backoffs.
* Using long polling.
* Addressing PR feedback.
* Addressing PR feedback.
Adding controller stop on config unload.
* Bump python-synology to 0.8.2
* state_attributes to device_state_attributes
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add config_flow to the dunehd integration
* Add tests
* Run gen_requirements_all
* Fix pylint error
* Better hostname validation
* Build device info in the class
* Improve configuration
* Read new properties for basic device information
Improve tests by mocking less improving stability of tests
* Clean up in device tests
* Support new port management api
* Improve initializing data
* Bump dependency to v28
* Requires 0.7.18 of elkm1 library to decode LD messages, and uses those messages to reliably set the arming/disarming user when there are more than one area. See https://github.com/home-assistant/core/issues/35310.
* Fixed typo
* Fixed off by one error -- LD command reports 1-based user-numbers which is the changed_by_id we want, but we need 0-based indices as argument to username.
* Bump required version of elkm1, remove logging message I was using for testing; prepping for PR.
* Black formatted
* Fixed bug whereby I needed to ref elements when running against released build of elkm1-lib
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Fix formatting for pyupgrade
* Update homeassistant/components/plugwise/__init__.py
Co-Authored-By: Robert Svensson <Kane610@users.noreply.github.com>
* Add try/except on setup
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Readd already reviewd await try/except
* Readd already reviewed config_flow
* Fix pylint
* Fix per 0.109 translations
* Remove unused import from merge
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Bump module version
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Fix pylint
* Fix per 0.109 translations
* Translations and config_flow, module version bump with required changes
* Translations and config_flow, module version bump with required changes
* Fix requirements
* Fix requirements
* Fix pylint
* Fix pylint
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Include configentrynotready on import
* Update __init__.py
* DataUpdateCoordinator and comment non-PR-platforms
* Fix reqs
* Rename devices variable in favor of entities
* Rework updates with DataUpdateCoordinator
* Peer review
* Peer review second part
* Cleanup comments and redundant code
* Added required config_flow test
* Peer review third part
* Update service was replaced by DataUpdateCoordinator
* Corrected testing, version bump for InvalidAuth, move uniq_id
* Remove according to review
* Await connect (py38)
* Remove unneccesary code
* Show only when multiple
* Improve config_flow, rename consts
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Process review comments
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add support for Elexa Guardian water valve controllers
* Zeroconf + cleanup
* Sensors and services
* API registration
* Service bug fixes
* Fix bug in cleanup
* Tests and coverage
* Fix incorrect service description
* Bump aioguardian
* Bump aioguardian to 0.2.2
* Bump aioguardian to 0.2.3
* Proper entity inheritance
* Give device a proper name
* Code review
* add tests
* better error handling in dependency
* dont suppress errors
* add support for multiple devices
* add test for Unauthorized status
* raise error on service call failure
* Working PoC
* Store
* Handle subscribing to MQTT and stopping stream when first telegram arrives
* Improve naming
* Now with test
* Better strings
* Fix Martins comments
* Improve mock device patching
* Bump dependency to v27
Add MQTT as after dependency
* Update to garminconnect 0.1.13
This will fix body composition sensors being unavailable
* Update requirements_all to garminconnect 0.1.13
* Update requirements_test_all.txt
* First cut of Rollease Acmeda Pulse Hub integration.
* Acmeda integration improvements:
- Moved common code into a base entity
- Battery level sensor added
- Localisation now working
* Added requirement for aiopulse now that it has been uploaded to PyPI.
* Exclude acmeda integration from coverage check as it relies on a hub being present.
* Fix Travis CI build issues.
* Remove unused constants.
* Remove unused group logic from cover.py
* Removed commented code from base.py
* Remove sensors (battery entities) on removal of hub.
* Remove unused groups from sensor.py
* Acmeda device and entity update made fully asynchronous using subscriptions to remove need for config polling.
* Updated aiopulse version dependency.
Removed non-functional battery charging indication.
* Rationalised common code to update entities into helpers.py
* Fix linting issue.
* Correct additional CI pylint errors.
* Index config_entries by entry_id.
Move entity loading and unloading to __init__.py
Add entry_id to dispatcher signal
Removed now unused polling code hub
Added config_flow unit tests
* Tweak to integration config_entry title.
* Bumped aiopulse module to 0.3.2.
Reduced verbosity of aiopulse module.
* Changed to using direct write of device state.
Removed old style async_step_init config_flow step.
* Remove superfluous battery_level and device_state_attributes from battery entity.
* Removal of unused strings.
Removal of unused create_config_flow helper.
Removal of stale comment.
* Remove use of shared container to track existing enities.
Moved removal and deregistration of entities to base class through use of dispatch helper.
* Fixed strings.json
* Fix incorrect use of remove instead of pop on dict.
* Add support for tilting covers, bump aiopulse version number.
* Bump aiopulse version to v0.3.4.
Fixed bug in cover supported_features.
* Bumped aiopulse version to 0.4.0
Update acmeda .coveragerc exclusions
* Removed already configured hub check from __init__.py async_setup_entry
Removed passing in hass reference to base entity class
Renamed entity async_reset to async_will_remove_from_hass
Changed device_info and properties
Migrated to CoveEntity from CoverDevice
Added dispatched_connect cleanup on hub removal
Removed unused entries from manifest
Removed override of battery icon
Renamed translations folder
* Reversed unintended change to .coveragerc
* Fixed config flow for multi-hub discovery.
* Acmeda enhancements as requested by MartinHjelmare
* Force import to connect to hub to retrieve id prior to creating entry
* Remove YAML configuration support.
* Tidied up config_flow and tests:
- removed unnecessary steps
- fixed typos
* Removed storage of hub in config_flow.
* Add config flow to gogogate2 component.
* Using a more stable gogogate api.
* Getting config flows working better by using different downstream library.
* Fixing options not getting default values.
Adding availability to cover entity.
* Simplifying return types of function.
* Address PR feedback.
* Making user config flow not abort.
* Using DataUpdateCoordinator.
* Addressing PR feedback.
* Using standard method for using hass.data
* Split auth fail test into separate tests.
* New forked_daapd component
* Bunch of changes
Add config flow and zeroconf
Add zones on callback when added by server
Add password auth
Add async_play_media for TTS
Add media_image_url
Add support for pipe control/input from librespot-java
Improve update callbacks
* Refactor as per code review suggestions
Move config_flow connection testing to pypi library (v0.1.4)
Remove use of ForkedDaapdData class
Decouple Master and Zone data and functions
Add updater class to manage websocket and entity updates
* More changes as per code review
Avoid direct access to entities in tests
Bump pypi version
Mark entities unavailable when websocket disconnected
Move config tests to test_config_flow
Move full url creation from media_image_url to library
Move updater entity from master to hass.data
Remove default unmute volume option
Remove name from config_flow
Remove storage of entities in hass.data
Use async_write_ha_state
Use signal to trigger update_options
Use unittest.mock instead of asynctest.mock
* Yet more changes as per code review
Add more assertions in tests
Avoid patching asyncio
Make off state require player state stopped
Only send update to existing zones
Split up some tests
Use events instead of async_block_till_done
Use sets instead of lists where applicable
Wait for pause callback before continuing TTS
* Remove unnecessary use of Future()
* Add pipes and playlists as sources
* Add support for multiple servers
Change config options to add max_playlists+remove use_pipe_control
Create Machine ID in test_connection and also get from zeroconf
Modify hass.data storage
Update host for known configurations
Use Machine ID in unique_ids, entity names, config title, signals
* Use entry_id as basis for multiple entries
* Use f-strings and str.format, abort for same host
* Clean up check for same host
* Add integration for wiffi devices
wiffi devices are DIY board manufactured by stall.biz.
Several devices are available, e.g. a weather station (weatherman), an
indoor environmental sensor (wiffi-wz) and some more.
This intgration has been developed using a weatherman device, but should
also work for other devices from stall.biz.
* Fix pylint warning
* Use WIFFI / STALL WIFFI instead of wiffi to be consistent with stall.biz
* Don't update disabled entities.
* fix complains
- move wiffi specific code to pypi
- remove yaml configuration code
* incorporate various suggestions from code review
* fix remaining comments from Martin
* fix comments
* add tests for config flow
* fix comments
* add missing requirements for tests
* fix pylint warnings
* fix comments
* fix comments
remove debug log
rename .translations to translations
* rebase and adapt to latest dev branch
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix missing import
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use helper functions for exception handling
* Create a separate class to handle communication with the device
* Update manifest
* Use coroutine for service setup
* Fix sensor update
* Update tests
* Fix MP1 switch
* Add device.py to .coveragerc
* Remove unnecessary blocking from test_learn_timeout
* Change access method for entries with default values
* Make the changes suggested by MartinHjelmare
* Remove dot from debug message
* Use underscore for unused variable
When the websocket is created `SSLContext.load_default_certs` is called
each time which opens up the system default ssl certs file and reads it in
Normally this goes unnoticed, however since there are frequent connects
and disconnects of the websocket it was noticeable.
* Update requirements_all.txt
Updated to vigilancemeteo version 3.0.1
* Update requirements_test_all.txt
Updated to vigilancemeteo version 3.0.1
* Update manifest.json
Update to correct typo error
* rewrite library
* Update strings.json
* fix updated with empty reply
* dont use entity_id
* atag_id
* use super init instead
* original ids to prevent breaking change
* Universal Powerline Bus - Link Event
* Bump lib version.
* Update homeassistant/components/upb/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: add error logging when exception is encountered checking connectivity
* lutron_caseta: tests mock bridge creation, not ha-side connectivity check
* lutron_caseta: catch more specific Error types while checking bridge conn.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial commit for BSBLan Climate component
The most basic climate functions work.
* Delete manifest 2.json
wrongly added to commit
* fix incorrect name
current_hvac_mode
* update coverage to exclude bsblan
* sorted and add configflow
* removed unused code, etc
* fix hvac, preset mix up
now it sets hvac mode to none and preset to eco
* fix naming
* removed commented code and cleaned code that isn't needed
* Add test for the configflow
* Update requirements
fixing some issues in bsblan Lib
* Update coverage file to include configflow bsblan
* Fix hvac preset is not in hvac mode
rewrote how to handle presets.
* Add passkey option
My device had a passkey so I needed to push this functionality to do testing
* Update constants
include passkey and added some more for device indentification
* add passkey for configflow
* Fix use discovery_info instead of user_input
also added passkey
* Fix name
* Fix for discovery_info[CONF_PORT] is None
* Fix get value CONF_PORT
* Fix move translation to new location
* Fix get the right info
* Fix remove zeroconf and fix the code
* Add init for mockConfigEntry
* Fix removed zeroconfig and fix code
* Fix changed ClimateDevice to ClimatEntity
* Fix log error message
* Removed debug code
* Change name of device.
* Remove check
This is done in the configflow
* Remove period from logging message
* Update homeassistant/components/bsblan/strings.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add passkey
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add integration for Flick Electric NZ
* Start adding Config Flow and external API
* Second Wave of Config Flow and API implementation
* Fix test (errors is None instead of blank array?)
* Don't update sensor if price is still valid
* Add input validation
* Fix linting for DOMAIN
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove platform schema (config is by entries only)
* Don't catch AbortFlow exception
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update test
* Re-arrange try-catch in config flow
* Fix linting in sensor.py
* Staticly define list of components
* Fix test exceptions
* Fix _validate_input not being awaited
* Fix tests
* Fix pylint logger
* Rename test and remove print debug
* Add test for duplicate entry
* Don't format string in log function
* Add tests __init__ file
* Remove duplicate result assignment
* Add test for generic exception handling
* Move translations folder
* Simplify testing
* Fix strings/translation
* Move to "flick_electric" as domain
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ISY994 Add Config and Options Flow
Add tests for config flow
Fix test
Update Tests
* Fix merge errors
* Update homeassistant/components/isy994/strings.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix patching in tests to not actually start Home Assistant
Co-authored-by: J. Nick Koston <nick@koston.org>
* Initial version.
* Tests.
* Refactored tests.
* Update requirements_all
* Increase test coverage. Catch exception.
* Update .coveragerc
* Fix lint msg.
* Tweak test (more to force CI build).
* Update based on PR comments.
* Change unique_id to use stable string.
* Add Universal Powerline Bus "link" support.
* Fix missed call.
* Revert botched merge.
* Update homeassistant/components/upb/light.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Three changes.
Update service schema to require one of brightness/brightness_pct.
Fix bug in setting brightness to zero.
Replace async_update_status and replace with async_update.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add config flow to songpal
* Add config flow to songpal
* Add songpal to migrated service in discovery
* Improve songpal/set_sound_setting service
* Remove songpal config flow from .coveragerc omit
* Bump python-songpal to 0.12 and fix exception handling
* Revert "Improve songpal/set_sound_setting service"
This reverts commit 9be076ab52e21f268322572c36709a17d41db771.
* Code style fix
* Add connections to device_info
* Fix pylint
* Ignore braava tv
* Fix test warning
* Add @shenxn as codeowner
* Remove model from configuration data
* Get name from device in user step
* Add unload entry support
* Delete translations as it will get generated as part of CI
* Code cleanup
* Fix typo
* Remove _show_setup_form
* Change configuration from media_player to songpal
Co-authored-by: Raman Gupta <7243222+raman325@users.noreply.github.com>
* Start gateway using new zigpy init.
Update config entry data import.
Use new zigpy startup.
Fix config entry import without zha config section.
Auto form Zigbee network.
* Migrate config entry.
* New ZHA config entry flow.
Use lightweight probe() method for ZHA config entry validation when
available. Failback to old behavior of setting up Zigpy app if radio lib
does not provide probing.
* Clean ZHA_GW_RADIO
* Don't import ZHA device settings.
* Update config flow tests.
* Filter out empty manufacturer.
* Replace port path with an by-id device name.
* Rebase cleanup
* Use correct mock.
* Make lint happy again
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use executor pool for IO
* Address comments.
Use AsyncMock from tests.
* Use core interface to test config flow.
* Use core interface to test config_flow.
* Address comments. Use core interface.
* Update ZHA dependencies.
* Schema guard
* Use async_update_entry for migration.
* Don't allow schema extra keys.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add support for Numato 32 port USB GPIO boards
Included are a binary_sensor, sensor and switch component
implementations. The binary_sensor interface pushes updates via
registered callback functions, so no need to poll here.
Unit tests are included to test against a Numato device mockup.
* Refactor numato configuration due to PR finding
* Resolve minor review findings
* Bump numato-gpio requirement
* Load numato platforms during domain setup
According to review finding
* Guard from platform setup without discovery_info
According to review finding
* Move numato API state into hass.data
According to review finding.
* Avoid side effects in numato entity constructors
According to review finding
* Keep only first line of numato module docstrings
Removed reference to the documentation. Requested by reviewer.
* Minor improvements inspired by review findings
* Fix async tests
Pytest fixture was returning from the yield too early executing teardown
code during test execution.
* Improve test coverage
* Configure GPIO ports early
Review finding
* Move read_gpio callback to outside the loop
Also continue on failed switch setup, resolve other minor review
findings and correct some error messages
* Bump numato-gpio requirement
This fixes a crash during cleanup. When any device had a communication
problem, its cleanup would raise an exception which was not handled,
fell through to the caller and prevented the remaining devices from
being cleaned up.
* Call services directly
Define local helper functions for better readability.
Resolves a review finding.
* Assert something in every test
So not only coverage is satisfied but things are actually tested
to be in the expected state.
Resolves a review finding.
* Clarify scope of notification tests
Make unit test for hass NumatoAPI independent of Home Assistant (very basic test of notifications).
Improve the regular operations test for notifications.
* Test for hass.states after operating switches
Resolves a review finding.
* Check for wrong port directions
* WIP: Split numato tests to multiple files
test_hass_binary_sensor_notification still fails.
* Remove pytest asyncio decorator
Apears to be redundant. Resolves a review finding.
* Call switch services directly.
Resolves a review finding.
* Remove obsolete inline pylint config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Improve the numato_gpio module mockup
Resolves a review finding.
* Remove needless explicit conversions to str
Resolves review findings.
* Test setup of binary_sensor callbacks
* Fix test_hass_binary_sensor_notification
* Add forgotten await
Review finding.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump arcam-fmj with better connection failed support
* Log unexpected exceptions in arcam client
* Consider undetected as 2ch to match OSD
* Ask for explicit update on start
* Display a QR code for homekit pairing
This will reduce the failure rate with HomeKit
pairing because there is less chance of entry
error.
* Add coverage
* Test that the qr code is created
* I cannot spell
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* bravia-tv version bump
* Fix Auth Cookies
- Fix authentication cookie expiration.
- Remove obsolete error handling (since bravia-tv==1.0.2)
- Remove obsolete mac address references. (since bravia-tv==1.0.2)
- Update tests.
* fix async_refresh_playing_info
* Improve code format
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Config_entry needs mac address for HA restart
This was mistakenly taken out. Home-Assistant needs to store mac address in
case restarted. TV needs to be on to acquire mac address. This is neccesary
to allow TV to be turned on by Home-Assistant after Home-Assistant is
restarted.
* Skip update() during state changes
It is best for performance to skip updates during state change because
bravia.turn_on() will commonly push async_update() beyond it's update
interval.
* update tests
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* HomeKit: Store generated aid against unique_id where possible
* Fix conflict
* Fix max accessories check
* homekit counts the bridge as an accessory
* Add coverage for aidmanager
* prepare for merge
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix signal collision in tado with multiple accounts
Tado signals were not unique enough to prevent collisions
between accounts with the same zone ids.
* Bump upstream to fix multiple tado accounts
* switch signal undo to async_on_remove
* Bump version now that upstream is released
* bump python-tado
* While its only the dep that changed since the last run, best to force another CI to be sure
* Add Braava support to iRobot Roomba component
* Replace async_add_job with async_add_executor_job in roomba
* Improve readability in roomba
* Improve error handling in roomba
* Cleanup async_update in roomba
* Split into multiple files in roomba
* Hide protocal details in braava
* Switch to push in braava
* Bump roombapy version to 1.5.1
* Add roomba files to .coveragerc
* Fix typo
* Remove side effects from init in roomba
* Implement StateVacuumDevice in Roomba
* Add IRobotEntity base class to braava
* Fix state in roomba
* Add @shenxn as a codeowner of braava
* Updating the panasonic_viera component
* Updating .coveragerc
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Update strings.json
* Rebasing
* Updating the panasonic_viera component
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Adding pt-BR translation
* Removing Brazilian Portugues translations
* Modifying error handling
* Adding SOAPError to except handling
* Updating translation
* Refactoring async_step_import
* Fixing indentation
* Fixing requirements after rebase
* Fixing translations
* Fixing issues after rebase
* Routing import step to user step
* Adding myself as a codeowner
* Rollback modbus to version 0.107.7
Update manifest to not use async.
Rollback entities to sync version.
Keep newer modifications apart from async.
Rollback __init__ to sync version but keep the new functionality.
add async sub directory
Adding the current (not working) version in a sub directory,
to allow easy sharing with a few alfa testers.
The async version are to be updated to use the serial/tcp already
available instead of the flaky pymodbus version. pymodbus is still
needed to encode/decode the messagess.
Update test cases to reflect sync implementation, but
keep the new functionality like e.g. conftest.py.
* do not publish async version
The async version will be made available in a forked repo, until
it is ready to replace the production code.
* Run scripts
* Improvement strings
* Fix FlowOptions update listener
* Update .ceveragerc
* Add tests
* Better strings
* Add test for OptionsFlow
* Run gen_requirements_all.py once again
* Fix pylint errors
* Log error when there is no bravia.conf file during import
* Improvement strings
* Use braviarc object from hass.data in options flow
* Use async_add_executor_job for IO
* Fix options flow test
* Fix tests
* Remove host_reachable method
* Remove dependencies
* Change setup_platform method to async
* Remove calling system_info
* Save mac in the config entry
* Fix get ignore sources
* Fix read config from file
* Remove the side effect from init
* Fix user_input for user step
* Switch OrderedDict to dict
* New config_entry instance for each test
* Revert change
* Patch async_setup_entry in test_import
* Change a way to create source list
* Consolidate repeated block of code
* Update tests
* Suggested change
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested channge
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested change
* Patch async_setup_entry
* Remove unnecesary if
* suggested change
* Suggested change
* Fix tests
* Fix pylint error
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Adding totalconnect zones as HA binary_sensors
* fix manifest.json
* flake8/pydocstyle fixes. Added codeowner.
* Update formatting per @springstan guidance.
* Fixed pylint
* Add zone ID to log message for easier troubleshooting
* Account for bypassed zones in update()
* More status handling fixes.
* Fixed flake8 error
* Another attempt at black/isort fixes.
* Bump total-connect-client to 0.50. Simplify code using new functions in
total-connect-client package instead of importing constants. Run black
and isort.
* Fix manifest file
* Another manifest fix
* one more manifest fix
* more manifest changes.
* sync up
* fix indent
* one more pylint fix
* Hopefully the last pylint fix
* make variable names understandable
* create and fill dict in one step
* Fix name and attributes
* rename to logical variable in alarm_control_panel
* Remove location_name from alarm_control_panel attributes since it is
already the name of the alarm.
* Multiple fixes to improve code per @springstan suggestions
* Update homeassistant/components/totalconnect/binary_sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Multiple changes per @MartinHjelmare review
* simplify alarm adding
* Fix binary_sensor.py is_on
* Move DOMAIN to .const in line with examples.
* Move to async_setup
* Simplify code using new features of total-connect-client 0.51
* First crack at config flow for totalconnect
* bump totalconnect to 0.52
* use client.is_logged_in() to avoid total-connect-client details.
* updated generated/config_flow.py
* use is_logged_in()
* Hopefully final touches for config flow
* Add tests for config flow
* Updated requirements for test
* Fixes to test_config_flow
* Removed leftover comments and code
* fix const.py flake8 error
* Simplify text per @Kane610 https://github.com/home-assistant/home-assistant/pull/32126#pullrequestreview-364652949
* Remove .get() to speed things up since the required items should always
be available.
* Move CONF_USERNAME and CONF_PASSWORD into .const to eliminate extra I/O
to import from homeassistant.const
* Fix I/O async issues
* Fix flake8 and black errors
* Mock the I/O in tests.
* Fix isort error
* Empty commit to re-start azure pipelines (per discord)
* bump total-connect-client to 0.53
* Update homeassistant/components/totalconnect/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/totalconnect/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fixes per @balloob comments
* Fix imports
* fix isort error
* Fix async_unload_entry
It still referenced CONF_USERNAME instead of entry.entity_id
* Added async_setup so not breaking change. Fixed imports.
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove TotalConnectSystem() per @MartinHjelmare suggestion
* Moved from is_logged_in() to is_valid_credentials()
The second is more accurate for what we are checking for, because is_logged_in() could return False due to connection error.
* Fix import in test
* remove commented code and decorator
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix test_config_flow.py
* bump total-connect-client to 0.54
* remove un-needed import of mock_coro
* bump to total-connect-client 0.54.1
* re-add CONFIG_SCHEMA
* disable pylint on line 10 to avoid pylint bug
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add pyserial to manifest
pymodbus is very developer oriented and assumes every developer
adapt the requierements.txt to his/hers needs.
Our requirements.txt is different it contains all posibilities allowing
user to later change configuration without having to install extra
packages.
As a consequence manifest.json needs to include the pyserial.
* modbus: make truly async client creation
Make hass call listen_once async.
Integrate content of start_modbus into async_setup.
Do not use the boiler plate create tcp client function from
pymodbus as it is sync, and also does not work well with asyncio,
instead call the init_<type> directly, since that is async.
* both component/modbus and component/serial uses pyserial-async
but with slighty different version requirements.
Combined the 2.
* Review 1
* Review 2
* Review
@staticmethod is no good, because the function uses class variables.
* Review
Pytest is sometimes a bit cryptic, lets hope this does it.
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* syntax for mac (pyupgrade)
* Change single key to BLID
* Resolve dict conflict
* Update homeassistant/components/roomba/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add description
* Revert "Remove test config flow"
This reverts commit 26a89422e8.
* Add tests
* Remove check if user none
* Replace CONF_USERNAME to CONF_BLID (breaking change)
* Update test_config_flow.py
* Add code owners
* Remove CONF_USERNAME (unused)
* Add multiple vacuum
* Add multiple vacuum
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix syntax name
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove CONF_PREFIX (unused)
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add import UNIT_PERCENTAGE
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rewrite parts of upnp component
* Linting
* Add SCAN_INTERVAL
* Get values simultaneously
* Move to time related constants, as per #32065
* Linting
* Move constant KIBIBYTE to homeassistant.const
* Simplify code
* Fix tests for #33344
* Changes after review
* Update homeassistant/components/upnp/sensor.py
* Changes after review
* Formatting
* Formatting
* Use ST from discovery info to avoid swapping device_types if device advertises multiple versions
* Linting
* Requirements for upnp + dlna_dmr components
* Linting
* Regen requirements
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
* Formatting
* Linting
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add a config flow for flume
* Sensors no longer block Home Assistant startup
since the flume api can take > 60s to respond on
the first poll
* Update to 0.4.0 to resolve the blocking startup issue
* Missed conversion to FlumeAuth
* FlumeAuth can do i/o if the token is expired, wrap it
* workaround async_add_entities updating disabled entities
* Fix conflict
* Add config flow to Synology DSM
* Use proper sensor unique ID from flow + sensor name
* Add description to api_version
* Add authentication flow check
* Add device_info
* Add test_login_failed test
* Bump python-synology to 0.5.0
* 0.5.0 test updates
* Use NAS S/N as config_flow unique_id
* Add missed conf disks + volumes
* Review: async_unload the async_track_time_interval
* Fix NoneType for disks or volumes
* Keep all disks and volumes forever
* Update homeassistant/components/synology_dsm/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/synology_dsm/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix "Keep all disks and volumes forever" for empty import
* Fix prettier
* Remove useless LOGGER in config flow
* Fix Synology DSM tests doing I/O
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add available property and raise exception
* Add entity available property
* Refactoring and fixes
* Refactoring and fix for multi sensor
* Bump abodepy version
* add sound mode support for devices that support it
* make setting and unsetting flag better
* move eq and audio settings into constants
* fix missed statement to use constant instead of hardcoded string
* further fixes based on review
* bump pyvizio version to include newly identified app
* Use backend-provided fan speed presets for Xiaomi vacuums
This needs input from Xiaomi vacuum owners to verify that it does not break anything.
I have personally tested this on rockrobo v1 (old mapping).
Related issues/PRs:
home-assistant/core#32821home-assistant/core#31268home-assistant/core#27268
This is a WIP as it requires a new upstream release.
The PR is https://github.com/rytilahti/python-miio/pull/643
* Bump version requirement for 0.5.0
* Bump requirements_test_all.txt, too
* Fix linting; missing setup.cfg on local checkout caused wrong settings for black..
* Add tests for both fan speed types
* Remove useless else..
* bump python-miio to 0.5.0.1 due to broken 0.5.0 packaging
* lib version
* unit-test refactoring
* added type hints
* added cover
* added test to see that consts have the same value as library consts
* Update tests/components/dynalite/test_init.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed trigger template
* Update homeassistant/components/dynalite/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dynalite/const.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed CONF_TRIGGER from const
corrected type hints - not clear why mypy didn't catch it
* conversion of the config to library CONFs
* moved to use the value since it should come from the library
* taking CONF_HOST from homeassistant.const instead of module const
* use dict.get
removed leftover log
* force device_class to be from homeassistant consts
* move dict.get to inline
* removed CONF from values
changed "channelcover" to "channel_cover"
* moved some CONF values out of const.py and taking them from homeassistant.const
* verifying that device class is a valid HA device class
* moved shutter to home assistant const
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Convert nut to config flow
* Add a test for importing
* lint
* Address review items (part 1)
* Address review items (part 1)
* Cleanup unique id handling
* Update tests for new naming scheme
* No unique id, no device_info
* Remove sensor types
* Update tests to use resources that still exist
* Fix setting zone overlays for tados that support swing
* Support for changing swing mode will come at a later
time as another upstream update is required.
* remove debug
* style
* Create __init__.py
* Create manifest.json
* Update zeroconf.py
* more work on integration
* more work on integration.
* add more sensor tests.
* Update const.py
* Update sensor.py
* more work on ipp.
* Update test_config_flow.py
* more work on ipp.
* Update config_flow.py
* Update config_flow.py
* Tado climate state moved to python-tado
* Resolve various incorrect states and add tests for known tado zone states
* Write state instead of calling for an update
This is a redux of pr #32564 with all of the zone state now moved into
python-tado and tests added for the various states.
* stale string
* add missing undos to dispachers
* remove unneeded hass
* naming
* rearrange
* fix water heater, add test
* fix water heater, add test
* switch hvac mode when changing temp if in auto/off/smart
* modbus: bumb pymodbus version to 2.3.0
pymodbus version 1.5.2 did not support asyncio, and in general
the async handling have been improved a lot in version 2.3.0.
updated core/requirement*txt
* updated core/CODEOWNERS
committing result of 'python3 -m script.hassfest'.
* modbus: change core connection to async
change setup() --> async_setup and update() --> async_update()
Use async_setup_platform() to complete the async connection to core.
listen for EVENT_HOMEASSISTANT_START happens in async_setup()
so it needs to be async_listen.
But listen for EVENT_HOMEASSISTANT_STOP happens in start_modbus()
which is a sync. function so it continues to be listen().
* modbus: move setup of pymodbus into modbushub
setup of pymodbus is logically connected to the class modbushub,
therefore move it into the class.
Delay construction of pymodbus client until event
EVENT_HOMEASSISTANT_START arrives.
* modbus: use pymodbus async library
convert pymodbus calls to refer to the async library.
Remark: connect() is no longer needed, it is done when constructing
the client. There are also automatic reconnect.
* modbus: use async update for read/write
Use async functions for read/write from pymodbus.
change thread.Lock() to asyncio.Lock()
* Modbus: patch for slow tcp equipment
When connecting, via Modbus-TCP, so some equipment (like the
huawei sun2000 inverter), they need time to prepare the protocol.
Solution is to add a asyncio.sleep(x) after the connect() and before
sending the first message.
Add optional parameter "delay" to Modbus configuration.
Default is 0, which means do not execute asyncio.sleep().
* Modbus: silence pylint false positive
pylint does not accept that a class construction __new__
can return a tuple.
* Modbus: move constants to const.py
Create const.py with constants only used in
the modbus integration.
Duplicate entries are removed, but NOT any entry that would
lead to a configuration change.
Some entries were the same but with different names, in this
case renaming is done.
Also correct the tests.
* Modbus: move connection error handling to ModbusHub
Connection error handling depends on the hub, not the
entity, therefore it is logical to have the handling in
ModbusHub.
All pymodbus call are added to 2 generic functions (read/write)
in order not to duplicate the error handling code.
Added property "available" to signal if the hub is connected.
* Modbus: CI cleanup
Solve CI problems.
* Modbus: remove close of client
close() no longer exist in the pymodbus library, use
del client instead.
* Modbus: correct review comments
Adjust code based on review comments.
* Modbus: remove twister dependency
Pymodbus in asyncio mode do not use twister but still throws a
warning if twister is not installed, this warning goes into
homeassistant.log and can thus cause confusion among users.
However installing twister just to avoid the warning is not
the best solution, therefore removing dependency on twister.
* Modbus: review, remove comments.
remove commented out code.
* Config flow for elkm1
* As entity ids can now be changed, the “alarm_control_panel”
attribute “changed_by_entity_id” is now “changed_by_keypad”
and will show the name of the Elk keypad instead of the entity id.
* An auto configure mode has been introduced which avoids the
need to setup the complex include and exclude filters. This
functionality still exists when configuring from yaml for power
users who want more control over which entities elkm1 generates.
* restore _has_all_unique_prefixes
* preserve legacy behavior of creating alarm_control_panels that have no linked keypads when auto_configure is False
* unroll loop
* bump pyvizio and update app_id to show app config to aid in HA config generation. squashed from multiple commits to make a rebase on dev easier
* bump pyvizio for bug fixes
* fix pyvizio version number
* only return app_id if app is unknown and explicitly create the dict that's returned
* fix tests
* fix docstring for app_id
* Added support for Minecraft SRV records
* Switched from dnspython to aiodns, improved server ping and log messages, use address instead of host and port in config flow
* Updated component requirements
ktnrg45
starkillerOG
Andrew Hayworth
Chris Talkington
Tom Brien
Ziv
Davide Varricchio
Bram Kragten
Franck Nijhof
ehendrix23
Robert Svensson
Paulus Schoutsen
jjlawren
bsmappee
Robert Van Gorkom
Kevin Fronczak
kennedyshead
Ian Harcombe
Tom Schneider
David F. Mulcahey
mreiling
mdegat01
Fredrik Erlandsson
MarBra
J. Nick Koston
Alexei Chetroi
Rami Mosleh
SukramJ
Martin Hjelmare
z00nx 0
Jeff Irion
Joakim Plate
Tim van Cann
matgad
jrester
Erik Montnemery
Aaron Bach
Quentame
Austin Mroczek
Maciej Bieniek
Patrick Kishino
Tom
uvjustin
Florent Thoumie
Alan Tse
Raman Gupta
gjbadros
Markus Bong
MatsNl
Jc2k
Jason Hunter
Ron Klinkien
Anders Melchiorsen
Josef Schlehofer
tetienne
Alan Murray
Daniel Perna
Xiaonan Shen
Ville Skyttä
Steffen Zimmermann
Felipe Martins Diel
Emily Mills
Thomas Johanns
Willem-Jan
Nicolas Bourasseau
Glenn Waters
Tomer Figenblat
Eerovil
Chris Aljoudi
cgtobi
ollo69
Daniel Høyer Iversen
Brynley McDonald
shbatm
David Nielsen
sean tearney
Jesse Hills
Markus Bong
gadgetmobile
David Straub
Fabian Affolter
Vilppu Vuorinen
clssn
Bernhard B
Pascal Vizeli
escoand
João Gabriel
Olivier B
jan iversen
Andrew Sayre
Kris Bennett
Save me
Steven Looman
Knapoc
Malachi Soord
Michal Ziemski
shred86
Teemu R
mvn23
Chris Caron
Balazs Sandor
tiagofreire-pt
Eugenio Panadero
Oliver
elmurato