* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Add support for shutter contact and motion detector device
* Add support for power switch devices
* Add support for light switch device
* Cleanup binary_switch and light platform
* Update comment
* Setup all-linking service
* Remove extra line
* Remove linefeed and tab escape chars
* Add services delete_all_link, load_all_link_database and print_all_link_database
* Check if reload is set
* Confirm entity is InsteonPLMEntity before attempting to load or print ALDB
* Debug load and print ALDB
* Debug print aldb
* Debug print_aldb
* Get entity via platform
* Track Insteon entities in component
* Store entity list in hass.data
* Add entity to hass.data
* Add ref to hass in InsteonPLMEntity
* Pass hass correctly to InsteonPLMBinarySensor
* Fix reference to ALDBStatus.PARTIAL
* Print ALDB record as string
* Get ALDB record from memory address
* Reformat ALDB log output
* Add print_im_aldb service
* Remove reference to self in print_aldb_to_log
* Remove reference to self in print_aldb_to_log
* Fix spelling issue with load_all_link_database service
* Bump insteonplm to 0.9.1
* Changes from code review
* Code review changes
* Fix syntax error
* Correct reference to cv.boolean and update requirements
* Update requirements
* Fix flake8 errors
* Reload as boolean test
* Remove hass from entity init
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Allow independent control of white level on flux_led component.
Also preserve brightness on color change.
* Limit white value support to RGBW mode.
* Requested changes.
* Correct liniting issues
* Formatting
Eufy device state isn't reported if the bulb is off, so avoid stamping on
the previous values if the bulb isn't going to give us useful information.
In addition, improve handling of bulb turn on if we aren't provided with a
brightness - this should avoid the bulb tending to end up with a brightness of
1 after power cycling.
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Fix up Eufy handling of colour lights
The Eufy colour lights have separate colour and temperature modes, and give
much less light output when in colour mode. Brightness is also handled in
a slightly confusing way, which means that state must be maintained in
order to avoid switching the light between modes by accident. Add some
additional handling for that.
* Bump the lakeside version
This version has important bugfixes for colour bulbs.
* Hound fixes
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
With AbodePy 0.12.3, dimmers will now work but a conversion of the brightness is required. Additionally, when a brightness value of 100 is sent to Abode, 99 is returned causing AbodePy to throw an error so this component will send 99 instead of 100.
Keeps the brightness value sent and returned from the device response consistent. However, during initialization and when a device refresh is received, Abode can return 100 thus we'll convert that case back to 99.
* Handle turn_on situation when no color is set
As is, an error gets thrown when turn_on is called without an HS value. By adding an if statement, we only try to set RGB if an HS value is applied.
* Fix Whitespace Issues
* Made Requested Changes
* unique_ids for tradfri lights and groups
* set color temperature on CWS bulb
Cannot set_color_temp on color bulb, needs conversion from mired to hsb
* make travis happy
* change condition so we ensure color bulbs are included, change comments.
* New service added to control the power mode of the yeelight
* Debug output removed.
* Strict validation of the available power modes
* Service description added
* Service parameter name fixed
damarco
Martin Hjelmare
Mattias Welponer
Tom Harris
Robert Svensson
Anders Melchiorsen
cdce8p
Matt Snyder
Paulus Schoutsen
Hate-Usernames
Otto Winter
Sebastian Muszynski
Matthew Garrett
Kerwin Bryant
Khole
Marco Orovecchia
Adam Mills
Johann Kellerman
Fabian Affolter
shred86
Niklas Wagner
Lewis Juggins
dramamoose
NovapaX
Lewis Juggins