* lib version
* unit-test refactoring
* added type hints
* added cover
* added test to see that consts have the same value as library consts
* Update tests/components/dynalite/test_init.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed trigger template
* Update homeassistant/components/dynalite/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dynalite/const.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* removed CONF_TRIGGER from const
corrected type hints - not clear why mypy didn't catch it
* conversion of the config to library CONFs
* moved to use the value since it should come from the library
* taking CONF_HOST from homeassistant.const instead of module const
* use dict.get
removed leftover log
* force device_class to be from homeassistant consts
* move dict.get to inline
* removed CONF from values
changed "channelcover" to "channel_cover"
* moved some CONF values out of const.py and taking them from homeassistant.const
* verifying that device class is a valid HA device class
* moved shutter to home assistant const
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Don't write storage to disk while stopping
* rework change
* lint
* remove delay save and schedule final write at stop
* update tests
* fix test component using private methods
* cleanup
* always listen
* use stop in restore state again
* whitelist JSON exceptions for later
* review comment
* make zwave tests use mock storage
If the harmony hub was not ready for connection or
was busy when importing from yaml, the import validation
would fail would not be retried.
To mitigate this scenario we now do the validation in
async_setup_platform which allows us to raise
PlatformNotReady so we can retry later.
* Handle unavailabe entities
* Remove some logging
* Set valve to lowest temp when turned off
* Remove some logging
* Address comments
* Report entity as connected if update is successful
* Fix stupidness
* Fix
* Store device_registry entry id in HueEvent
so it can be retrieved with that key when using device triggers
* Add device_trigger for hue_event from hue remotes
* supporting Hue dimmer switch & Hue Tap
* State mapping and strings are copied from deCONZ
* refactor mock_bridge for hue tests
and also share `setup_bridge_for_sensors`
for test_sensor_base and test_device_trigger.
* Add tests for device triggers with hue remotes
* Remove some triggers
* replace asyncio.wait with asyncio.gather since wait ignores exceptions
fix for test_entity_platform so it expects the exception
* changed to log on failed domains
* discovered that this fix actually removes other uncaught exceptions
* fix in the list of ignored exceptions
* replaced a few ignores on dyson tests that work locally but fail in the CI
* two more tests that are failing on the CI and not locally
* removed assertion on multiple entries with same unique_id - replaced with log and return
reverted test_entity_platform to its original since now there is no exception thrown
* entered all the dyson tests. they all pass locally and probabilistically fail in the CI
* removed unnecessary str() for exception
* added log message for duplicate entity_id / unique_id
* removed log in case of False return value
* added exc_info
* change the use of exc_info
* Convert nut to config flow
* Add a test for importing
* lint
* Address review items (part 1)
* Address review items (part 1)
* Cleanup unique id handling
* Update tests for new naming scheme
* No unique id, no device_info
* Remove sensor types
* Update tests to use resources that still exist
* Fix setting zone overlays for tados that support swing
* Support for changing swing mode will come at a later
time as another upstream update is required.
* remove debug
* style
* The api reports success before the state change
takes effect
* We now set state optimistically and followup with
an update 4 seconds in the future after any state change to
verify it actually happens.
* When hvac_mode is passed to the set_temperature service
we now switch to the desired mode.
* Add remote platform to hue integration
supporting ZGPSwitch, ZLLSwitch and ZLLRotary switches.
* Ported from custom component Hue-remotes-HASS from @robmarkcole
* Add options flow for hue, to toggle handling of sensors and remotes
* Sensors are enabled by default, and remotes are disabled,
to not generate any breaking change for existent users.
Also, when linking a new bridge these defaults are used,
so unless going explicitly to the Options menu,
the old behavior is preserved.
* SensorManager stores the enabled platforms and ignores everything else.
* Bridge is created with flags for `add_sensors` and `add_remotes`,
and uses them to forward entry setup to only the enabled platforms.
* Update listener removes disabled kinds of devices when options are changed,
so device list is in sync with options, and disabled kinds disappear from HA,
leaving the enable/disable entity option for individual devices.
* Fix hue bridge mock with new parameters
* Revert changes in hue bridge mock
* Remove OptionsFlow and platform flags
* Extract `GenericHueDevice` from `GenericHueSensor`
to use it as base class for all hue devices, including those without any entity,
like remotes without battery.
* Add `HueBattery` sensor for battery powered remotes
and generate entities for TYPE_ZLL_ROTARY and TYPE_ZLL_SWITCH remotes.
* Remove remote platform
* Add HueEvent class to fire events for button presses
* Use `sensor.lastupdated` string to control state changes
* Event data includes:
- "id", as pretty name of the remote
- "unique_id" of the remote device
- "event", with the raw code of the pressed button
('buttonevent' or 'rotaryevent' property)
- "last_updated", with the bridge timestamp for the button press
* Register ZGP_SWITCH, ZLL_SWITCH, ZLL_ROTARY remotes
* fix removal
* Exclude W0611
* Extract GenericHueDevice to its own module
and solve import tree, also fixing lint in CI
* Store registered events to do not repeat device reg
* Minor cleaning
* Add tests for hue_event and battery entities for hue remotes
* Best effort state initialization of bayesian binary sensor.
Why:
* https://github.com/home-assistant/home-assistant/issues/30119
This change addresses the need by:
* Running the main update logic eagerly for each entity being observed
on `async_added_to_hass`.
* Test of the new behavior.
* Refactor in order to reduce number of methods with side effects that
mutate instance attributes.
* Improve test coverage
Why:
* Because for some reason my commits decreased test coverage.
This change addresses the need by:
* Adding coverage for the case where a device returns `STATE_UNKNOWN`
* Adding coverage for configurations with templates
* rebase and ensure upstream tests passed
* Delete commented code from addressing merge conflict.
Ziv
mvn23
David F. Mulcahey
AJ Schmidt
Chris Talkington
Paulus Schoutsen
Martin Hjelmare
Erik Montnemery
J. Nick Koston
Robert Svensson
cgtobi
Jonathan Keljo
Maciej Bieniek
HomeAssistant Azure
Brian Rogers
Eugenio Panadero
Bram Kragten
springstan
Alexei Chetroi
Kit Klein
Ron Klinkien
Chris Caron
Raman Gupta
Jeff McGehee