Bump gcal_sync to 4.0.1
This reverts test chagnes from PR #81562 that were actually incorrect given
the calendar "get" API returns less information that the "CalendarList" api.
* Fix switchbot not becoming available again after unavailable
If the advertisment was the same and we were previously
marked as unavailable we would not mark the device as
available again until the advertisment changed. For lights
there is a counter but for the bots there is no counter
which means the bots would show unavailable even though
they were available again
* naming
* naming
* deconz: Use partition instead of split where possible
With a smattering of code deduplication
Split out of #81493
* Update homeassistant/components/deconz/util.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
fix: late-import MQTTMessage
`paho-mqtt` is not listed in main requirements and is imported early by `conftest`.
Import it late to avoid an ImportError.
Split out from #81678.
* Improve typing siren
* Improve typing switch
* Set siren type hints at class level
* Set switch type hints at class level
* Follow up comment
* Improve hints on siren templates
* Another cleanup for siren
* Follow up comment
* Follow up comment
* Initial support for modbus
* Complete test coverage of config flow
* Bump to 1.1.0 with corrected numbers
* Handle missing mapping for reset-alarm
* Fixup type checks after library bump
* Adjust coil number
* Move word_swap to nibegw
* Adjust to 1.1.2 with fixes
* Add series property
* Add S series models
* Correct test for invalid host
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Move some things into library
* Adjust strings somewhat
* Correct black
* Correct test after validation change
Co-authored-by: J. Nick Koston <nick@koston.org>
* Consolidate switch entities to one class
* Move turn on/off into UnifiSwitchEntity
* Add event subscription
Remove storing entity for everything but legacy poe switch
* Only one entity class
* Improve generics naming
* Rename loader to description
* Improve control_fn naming
* Move wrongfully placed method that should only react to dpi apps being emptied
* Improve different methods
* Minor renaming and sorting
* Mark callbacks properly
* Create repairs issue if an outdated currency code is configured
* Add script for updating list of currencies
* Use black for formatting
* Move currency codes to a separate file
* Address review comments
* Support case-insensitive matching
* Revert "Support case-insensitive matching"
This reverts commit 0fdb2aa6bc.
* Explicitly check the case of matcher fields in `async_is_plugged_in`
* Improve typing humidifier
* Improve typing lock
* Improve typing number
* Set humidifier type hints at class level
* Set lock type hints at class level
* Set number type hints at class level
* Some small updates
* Follow up comment
* Remove assert
* Always use Celsius in Shelly integration
* Update homeassistant/components/shelly/sensor.py
Co-authored-by: Aarni Koskela <akx@iki.fi>
* Restore unit from the registry during HA startup
Co-authored-by: Aarni Koskela <akx@iki.fi>
* Add Overkiz AtlanticPassAPCHeatingAndCoolingZone
* Fix commands instanciations to be simpler
* Update AtlanticPassAPCHeatingAndCoolingZone to show temperature and fix HA threads
* Simplify async_execute_commands in order to receive simpler list
* Fix get and set temperature in derogation or auto mode
* Remove hvac_action from AtlanticPassAPCHeatingAndCoolingZone
* Remove unused lines
* Update async_execute_commands to work like async_execute_command
Implement cancel for multiple commands
* Improve to use preset_home for internal scheduling
* Remove async_execute_commands
* Improvement for AtlanticPassAPCHeatingAndCoolingZone
* Update homeassistant/components/overkiz/climate_entities/__init__.py
Co-authored-by: Quentame <polletquentin74@me.com>
* Update homeassistant/components/overkiz/climate_entities/atlantic_pass_apc_heating_and_cooling_zone.py
Co-authored-by: Quentame <polletquentin74@me.com>
* Update homeassistant/components/overkiz/climate_entities/atlantic_pass_apc_heating_and_cooling_zone.py
Co-authored-by: Quentame <polletquentin74@me.com>
* Update homeassistant/components/overkiz/const.py
Co-authored-by: Quentame <polletquentin74@me.com>
Co-authored-by: Quentame <polletquentin74@me.com>
* Added initial files for air-Q integration
* Allow FIXME comments in pylint (temporary)
Also reintroduce --ignore-missing-annotations=y
* Set up air-q entry to connect to aioairq's API (initial attempt)
Also add necessary constants
* Implement a class for sensors and its update logic
Very early stage, WIP
* Zeroconf and authentication are working
* Complete the bare-bone minimal working version
Specifically, make AirQSensor update its values.
* Handle invalid authentication gracefully
* Handle ClientConnectionError gracefully
* Add field hint for the login form
The key in the schema, which defines the form in
`ConfigFlow.async_show_form` is looked up in both `airq/strings/json`
and `airq/translations/en.json`. I am still not 100% sure how this
lookup is performed. WIP
* Minor cleanups
* Extend sensor list to all supported by SensorDeviceClass
Also manage warming up sensors
* aioairq is published to PyPI and mentioned in requirements
* Reordered constants and list content alphabetically
As required by style guides. Also turned SENSOR_TYPES to a list
* Updated file docstrings for a dev unfamiliar w/homeassistant like myself
* Adding a bit of logging for the integration setup process
* Expose scan interval & smoothing flag
Also streamline test_authentication in config_flow.
* Fix a type annotation mistake
* Use as many constants from homeassistant.const as possible
My only concern is using CONST_IP_ADDRESS = "ip_address" for smth which
stands for both IP address and mDNS...
* Temporarily rollback ConfigFlow.async_step_configure and use defaults
TODO: implement OptionFlowHandler instead
* Define custom Coordinator, w subset of airq config
The latter is then accessed from entity / sensor constructors to define
correct DeviceInfo
* Provide translations to de & fr + minor changes to en
* Provide translations to ru + a minor en changes
* Make translation a little more helpful and polite
* Fix devicename and entry title
* Remove stale commented out code
* Test config_flow
At this point two helper functions which interact with the external
library are not tested
* Clean up unrelated and meant as temporary changes
* Clean up unnecessary comments meant for internal use
* Move fetching config to a dedicated async coordinator method
As opposed to it being a potentially poorly justified step in
async_setup_entry
* Remove zeroconf support since it is not yet ready
* Remove translations other than en
* Remove unnecessary comments, manifest.json entries, and constants
* Improve exception handling
- `_LOGGER` uses `debug` and not `error` levels.
- Drop `ClientConnect` and catch `aiohttop.ClientConnectError` directly
- Drop `Exception` as it is not expected from `aioairq` (remove the
corresponding test too)
* Drop strings for obsolete errors and steps
Specifically, `unknown` error isn't caught any more. `configure` step
has also been removed.
* Refactor en.json to be consistent with strings.json
* Move target_route from a coordinator argument to a constant
At this point a user cannot configure the target_route route, thus it
does not make sense to expose it half-heartedly in
`AirQCoordinator.__init__`, since it cannot be accessed.
* Fix an async call in `AirQCoordinator.async_setup_entry`
* Refactor underlying aioairq API
- Use `homeassistant.helpers.aiohttp.async_get_clientsession` and pass a
single persistent session to `aioariq.AirQ.__init__`
- `aioairq.AirQ.fetch_device_info` now returns a `DeviceInfo` object heavily
inspired and almost compatible with `homeassistant.helpers.entity.DeviceInfo`.
Make heavier use of this object and define a single `DeviceInfo` in the
`AirQCoordinator` (instead of recreating the same object for each sensor
of the device in `sensor.AirQSensor`)
- Drop two helper functions in `config_flow.py` and operate on `aioariq.AirQ`
methods directly
* Fix the version of aioairq
* Add 15 more sensors + icons
* Remove cnt* & TypPS, change units of health & performance
* Add 12 more sensors
* Add a missing icon
* Gracefully handle device not being available on setup
If the device and the host are not on the same WiFi,
ServerTimeoutError is raised, which is caught by
ClientConnectionError.
If the device is powered off, ClientConnectionError is expected.
In both cases, ConfigEntryNotReady is raised, as prescribed by the docs.
Newer version of aioairq times-out far quicker than the default 5 mins.
* Rename two sensors
* Validate provided IP address / mDNS
aioairq now raises InvalidInput if provided IP / mDNS does not seem
valid. Handle this exception correctly
* Apply suggestions from code review
Clean up the comments and rename the logger
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during the first refresh
- Fetched info is stored in AirQCoordinator.device_info.
- In `AirQSensor.native_value` only multiply by the factor if
the sensor reading is not None
- Fix the tests for ConfigFlow for aioairq==0.2.3. Specifically
make the dummy data pass the new validation step upstream
+ add a test which fails it
* Drop custom device classes for now
* Apply suggestions from code review
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during ConfigFlow.async_step_user
Store the result obtained by `airq.fetch_device_info` it in
`config_entry.data`. Pass the entire config entry to `AirQCoordinator`
and build the entire `homeassistant.helpers.entity.DeviceInfo` in the
`AirQCoordinator.__init__`. This makes
`AirQCoordinator._async_fetch_device_info` and overloaded
`AirQCoordinator._async_config_entry_first_refresh` obsolete.
Bump aioairq version.
Turn update_interval from `AirQCoordinator.__init__` argument into a
contestant.
* Custom entity description exposing a hook to modify sensor value
Use a `AirQEntityDescription` with a callable `value_fn` which allows to
change the sensor value retrieved from the device. Note that the
callable does not handle data retrieval itself (even from
`coordinator.data`). Instead it is purely a hook to transform obtained
value.
* Avoid duplicated use of unique_id
Device info is fetched during the `ConfigFlow.async_user_step`.
`unique_id` is taken from the device info and is **not** stored
in `config_entry.data`. Subsequently `config_entry.unique_id` is
used instead.
* Drop unnecessary try-except
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Clarify the use of value_transform_fn
* Refactor the use of lambdas in AirQEntityDescription
Now it is the job of the callable under `value` to get the sensor
reading from the coordinator's data. Factoring this functionality into a
callback decouples the key of the description from the key of dict,
returned by the API, so `AirQEntityDescription` no longer requires its key
to be set to smth clearly internal (e.g. `nh3_MR100`).
* Use a callback to update native_value
Since all `native_value`s are updated synchronously, it can as well be
done in a callback for better state consistency (right?)
* Revert the description keys to match data keys
Must match given the current way of identifying available sensors. On a
broader scale, they must match to be able to relate the descriptions to
sensors, unless a separate lookup table is maintained.
* Reduce number of loops when adding sensors
Filtering warming up sensors and non-sensor keys can be combined with
adding entities.
* Remove obsolete imports
* Update integrations.json
* Add integration_type
Integration supports multiple devices => hub
Co-authored-by: dl2080 <daniel.lehmann@runbox.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
Co-authored-by: Daniel Lehmann <43613560+dl2080@users.noreply.github.com>
Co-authored-by: Martin Selbmann <job@martin-selbmann.de>
* Improve typing debug_info
* Improve typing device_automation
* Improve typing device_trigger
* Improve typing fan
* Additional type hints device_trigger
* Set fan type hints to class level
* Cleanup and mypy
* Follow up and missed hint
* Follow up comment
* use DataUpdateCoordinator for glances
add tests to increase coverage
fix test_config_flow.py
fix codecov/patch
remove unused const, minor tweaks
remove invalid_auth test as it is not implemented
fix type hints
* change to async_forward_entry_setups
* Use Dataupdatecoordinator for glances
* minor fixex
* minor fixes
* minor fix
* remove support_versions const
* coe cleanup
* address comments
* fix sensor native_value
* Rename entry to entry_data in `get_api`
* Remove whitespace in sensor name
* Review comments from #74325
* Remove moved test
* Fix init
* Handle no data
* Remove print
* Fix tests
* PlatformNotReady if no data
* Recover failed platform setup
* Fix broken test
* patch context
* reset test init
* Move to platform
* asyncio gather
* Remove duplicate code
* Bump bleak-retry-connector to 2.8.2
Tweaks for the esp32 proxies now that we have better error
reporting. This change improves the retry cases a bit with
the new https://github.com/esphome/esphome/pull/3971
* empty
* Include esphome device name in BLE logs
This makes it easier to debug what is going on when there
are multiple esphome proxies
* revert unintended change
* Mute superfluous exception when no webhook is to be droped
* Update homeassistant/components/netatmo/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
lunmay
Martin Hjelmare
Ernst Klamer
Malte Franken
Allen Porter
GitHub Action
Aaron Bach
J. Nick Koston
Aarni Koskela
uvjustin
Jc2k
Ville Skyttä
Phil Bruckner
Hessel
Vincent Knoop Pathuis
Franck Nijhof
epenet
Avishay
Kryštof Korb
Joakim Plate
Jan Bouwhuis
ztamas83
Bram Kragten
Marc Mueller
chpego
Joakim Sørensen
Steven Looman
Robert Svensson
Erik Montnemery
Jon Gilmore
Thibaut
Raman Gupta
Robert Hillis
Christopher Bailey
puddly
Mick Vleeshouwer
TheJulianJES
StefanIacobLivisi
David F. Mulcahey
Benjamin Salchow
tstabrawa
Simone Chemelli
Artem Draft
Maciej Bieniek
Klaas Schoute
Sebastian Muszynski
Tobias Sauerwein
Avi Miller
Tim Rightnour
Bouwe Westerdijk
Nathan Spencer
Shay Levy
javicalle
Nyro
krazos
Renat Sibgatulin
mkmer
Dennis Schroer
hahn-th
Rami Mosleh
Jan
Austin Brunkhorst
rappenze
Poltorak Serguei
G Johansson
Daniel Hjelseth Høyer
Paulus Schoutsen
Mike Degatano
Ron Klinkien
Willem-Jan van Rootselaar
On Freund
Aidan Timson
Josh Anderson
Chris Talkington
aschmitz
Stackie Jia
Pascal Reeb
Jafar Atili
Raj Laud
mezz64
Guido Schmitz
Kevin Stillhammer