* Add HomematicIP security zone
* Update access point tests
* Fix state if not armed and coments
* Add comment for the empty state_attributes
* Fix comment
* Fix spelling
There are some devices that speak HomeKit that we shouldn't expose. Some
bridges (such as the Hue) provide reduced functionality over HomeKit and
have a functional native API, so should be ignored. We also shouldn't
offer to configure the built-in Home Assistant HomeKit bridge.
* support for tuya platform
* support tuya platform
* lint fix
* change dependency
* add tuya platform support
* remove tuya platform except switch. fix code as required
* fix the code as review required
* fix as required
* fix a mistake
* Added a "last update" sensor that could be used by automations + cosmetic changes
* Improved the update logic of sensor data
The platform is now continuously adjusting the refresh interval
in order to synchronize with the expected next update from the
NetAtmo cloud. This significantly improves reaction time of
automations while keeping the refresh time to the recommended
value (10 minutes).
* Linting
* Incorporated the advanced Throttle class to support adaptive
throttling, as opposed to integrating it in the core framework.
Following code review, it was suggested to implement the
specialised Throttle class in this platform instead of making a
change in the general util package. Except that the required change
(about 4 LoC) is part of the only relevant piece of code of that
class, therefore this commit includes a full copy of the Throttle
class from homeassistant.util, plus the extra feature to support
adaptive throttling.
* Cosmetic changes on the introduced "last updated" sensor
* Alternate implementation for the adaptive throttling
Ensure the updates from the cloud are throttled and adapted to the
last update time provided by NetAtmo, without using the Throttle
decorator. Similar logic and similar usage of a lock to protect
the execution of the remote update.
* Linting
* Add Cloudflare DNS component
* Removed man
* Update .coveragerc
* Update cloudflare.py
* Update cloudflare.py
* Changed records to be required
* Fix typos, update order and other minor changes
* Add sound mode support
* continuation line indent
* indentation
* indentation
* Remove option to configure sound_mode_dict
* Sound mode support
- removed the sound_mode_raw propertie because it was not used, (still available through self._sound_mode_raw (as device attribute for automations and diagnostics)
* Detect sound mode support from device
Removed the config option to indicate if sound mode is supported.
Added detection if sound mode is supported from the receiver itself.
Pushed denonavr library to V.0.7.4
* Pushed denonavr to v.0.7.4
* Add python 3.7 to travis and tox
* Use pyyaml from github
* Don't version constraints
* Fix version tag
* Change to new pyyaml release
* Python 3.7 requires xenial
* Fix namespace detection
* Use correct RegEx type
* Update pexpect to 4.6
* Use correct validation for dictionaries
* Disable Py37 incompatible packages
* Upgrade all pexpect to 4.6
* Add explicit None as default param
* Add HomematicIP Cloud to config flow
* Inititial trial for config_flow
* Integrations text files
* Load and write config_flow and init homematicip_cloud
* Split into dedicated files
* Ceanup of text messages
* Working config_flow
* Move imports inside a function
* Enable laoding even no accesspoints are defined
* Revert unnecassary changes in CONFIG_SCHEMA
* Better error handling
* fix flask8
* Migration to async for token generation
* A few fixes
* Simplify config_flow
* Bump version to 9.6 with renamed package
* Requirements file
* First fixes after review
* Implement async_step_import
* Cleanup for Config Flow
* First tests for homematicip_cloud setup
* Remove config_flow tests
* Really remove all things
* Fix comment
* Update picture
* Add support for async_setup_entry to switch and climate platform
* Update path of the config_flow picture
* Refactoring for better tesability
* Further tests implemented
* Move 3th party lib inside function
* Fix lint
* Update requirments_test_all.txt file
* UPdate of requirments_test_all.txt did not work
* Furder cleanup in websocket connection
* Remove a test for the hap
* Revert "Remove a test for the hap"
This reverts commit 968d58cba1.
* First tests implemented for config_flow
* Fix lint
* Rework of client registration process
* Implemented tests for config_flow 100% coverage
* Cleanup
* Cleanup comments and code
* Try to fix import problem
* Add homematicip to the test env requirements
* Added support to HTTPS URLs on SynologyDSM
* Bumped python-synology to 0.1.1
* Makes lint happy
* Added attribution to Synology and fixed 3rd library version
* Fixed requirements_all.txt
* Makes SynologyDSM defaults to 5001 using SSL
* Added push camera
* add camera.push
* Address comments and add tests
* auff auff
* trip time made no sense
* travis lint
* Mock dependency
* hound
* long line
* long line
* better mocking
* remove blank image
* no more need to mock dependency
* remove import
* cleanup
* no longer needed
* unused constant
* address @pvizeli review
* add force_update
* Revert "add force_update"
This reverts commit e203785ea8.
* rename parameter
* expose climate current temperature in prometeus metrics
* import ATTR_CURRENT_TEMPERATURE from climate instead of const
* remove duplicated ATTR_CURRENT_TEMPERATURE from const
* fix ATTR_CURRENT_TEMPERATURE import
* Added support for Duke Energy smart meters
* Fixed hound
* Added function docstring
* Moved strings to constants, implemented unique_id, and cleaned up setup.
* Added doc string.
* Fixed review issues.
* Updated pydukenergy to 0.0.6 and set update interval to 2 hours
* Updated requirements_all
## Description:
This feature adds possibly of setting tilt_position in scene for covers.
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io) with documentation (if applicable):** home-assistant/home-assistant.github.io#<home-assistant.github.io PR number goes here>
## Example entry for `configuration.yaml` (if applicable):
```yaml
scene:
- name: Close Cover Tilt
entities:
cover.c_office_north:
tilt_position: 0
- name: Open Cover Tilt
entities:
cover.c_office_north:
tilt_position: 100
```
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io)
If the code communicates with devices, web services, or third-party tools:
- [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [ ] New files were added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard.py#L54
## Description:
Switch to own packaged version of pylgnetcast
Request to make a pypi package didn't get any response: https://github.com/wokar/pylgnetcast/issues/1
**Related issue (if applicable):** #7069
* Only create frontend client_id once
* Check user and client_id before create refresh token
* Lint
* Follow code review comment
* Minor clenaup
* Update doc string
Previous commit d4f7dfa successfully fixed the bug in which lights
would not turn off if a transition was specified, however if 'bri' is not
present in the payload of the PUT request set to deCONZ, then any
'transitiontime' ends up being ignored. This commit addresses the
unintended side effect by reintroducing 'bri', resulting in the following
payload:
{ "on": false, "bri": 0, "transitiontime": ... }
* Force to use access_token if hass.auth.active
* Not allow Basic auth with api_password if hass.auth.active
* Block websocket api_password auth when hass.auth.active
* Add legacy_api_password auth provider
* lint
* lint
* Update nut.py
Added input.frequency and a number of output parameters.
* Update nut.py
Fixed formatting issues
Added "devices" fields
* Separated "device.description" line to two lines.
* Update nut.py
Removed device.* sensors
When light.turn_off is invoked with a transition, the following payload was
sent to deCONZ via PUT to /light/N/state:
{ "bri": 0, "transitiontime": transition }
However, on recent versions of deCONZ (latest is 2.05.31 at the time of
writing) this does not turn off the light, just sets it to minimum brightness
level (brightness is clamped to minimum level the light supports without
turning it off).
This commit makes the code send this payload instead:
{ "on": false, "transitiontime": transition }
This works as intended and the light does transition to the 'off' state.
This change was tested with Philips Hue colored lights, IKEA colored lights
and IKEA white spectrum lights: they were all able to be turned off
successfully with the new payload, and none of them could be turned off with
the old payload.
* Use new trusted_proxies setting for X-Forwarded-For whitelist
* Only use the last IP in the header
Per Wikipedia (https://en.wikipedia.org/wiki/X-Forwarded-For#Format):
> The last IP address is always the IP address that connects to the last proxy,
> which means it is the most reliable source of information.
* Add two additional tests
* Ignore nonsense header values instead of failing
* Address inconsistent behavior between different controllers.
Correct issue with comparison that was preventing white value slider from being shown.
* Add white mode for Flux LED
* Call _bulb.turnOn() after bulb properties have been set to prevent immediate on action
* Only use existing brightness if rgb is None to prevent unexpected recalculation of passed rgb values.
* Remove blank line
* Undo change so current brightness is used in all cases.
* Revert "Fix #14919. Should throw exception when camera stream closed by frontend (#15028)"
This reverts commit 508d0459a7.
* Revert "Fix pylintrc section order and option placements (#15120)"
This reverts commit dbae410cf4.
* Revert "Add storage helper and migrate config entries (#15045)"
This reverts commit ae51dc08bf.
* Revert "Add language to dark sky weather component (#15130)"
This reverts commit 672a3c7178.
* Add storage helper
* Migrate config entries to use the storage helper
* Make sure tests do not do I/O
* Lint
* Add versions to stored data
* Add more instance variables
* Make migrator load config if nothing to migrate
* Address comments
* Add discovery support to mqtt climate component.
* - Fix flake8 error (./homeassistant/components/climate/mqtt.py:130:1: D202 No blank lines allowed after function docstring)
- Fix test error (since climate component was expected not to work - changed it to "lock" component, which also does not have MQTT discovery support yet)
* Fix old assert statement to reflect new lock component usage
* Change invalid MQTT discovery component type from 'lock' to 'timer', since contrary to the documentation the lock component is properly supported when using MQTT discovery.
* Make configuration of invalid MQTT config component a single point of entry to prevent missing the assertion later in the code when changing.
* Add new testcases to cover not-yet-covered code paths in https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/climate/mqtt.py
* MQTT Alarm Control Panel: add retain option for publishing for cases where receiver is asleep
* MQTT Alarm Control Panel: add retain option for publishing for cases where receiver is asleep
* MQTT Alarm Control Panel: add retain option for publishing for cases where receiver is asleep
* Fix MQTT Light with RGB and Brightness
When an MQTT light is given an RGB and Brightness topic, the RGB
is scaled by the brightness *as well* as the brightness being set
This causes 255,0,0 at 50% brightness to be sent as 127,0,0 at 50%
brightness, which ends up as 63,0,0 after the RGB bulb has applied
its brightness scaling.
Fixes the same issue in mqtt, mqtt-json and mqtt-template.
Related Issue: #13725
* Add comment to mqtt_json as well
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Update condition.py
Added code that writes to warning-log what entity causes a problem when 'value cannot be processed as a number', making troubleshooting easier.
* Make a one-line warning
* Show running apps as sources for Fire TV
* Fix unnecessary 'else' after 'return' (no-else-return)
* Remove 'pylint: disable=unused-argument'
* cleanup
* Improve volume support for Vizio Smartcast
* Vizio: avoid an error when 'self._device.get_current_volume()' returns 'None'
* Improve volume support for Vizio Smartcast
* Vizio: avoid an error when 'self._device.get_current_volume()' returns 'None'
* First line should end with a period
* Expose Wemo component availability to home assistant
* Do not add availability feature to dimmer - it works differently
* Brain fade, deleted completely the wrong thing.
Revert "Do not add availability feature to dimmer - it works differently"
This reverts commit f64e717981.
* (2nd attempt) Do not add availability feature to dimmer - it works differently
Current version only supports latitude and longitude or an address for the origin and destination fields. This update allows those fields to use entity IDs of device_tracker, zone, and sensor.
* Added support for Xiaofang Camera
* Added entry for Xiaofang 1080p camera
* Code fix
* Minor comment fix
* Updated coveragerc for Xiaomi cameras
* Added Xiaomi Camera
Added Xiaomi Camera to accommodate multiple models like Yi, Xiaofang, etc.
* Minor code fix
* Minor code fix
* Added model property
* Update xiaomi.py
* Minor code fix
* Update xiaomi.py
* Update xiaomi.py
* Minor code fix
* Package requirement fix due to Version conflict
* To fix conflicts
* Update package_constraints.txt
* Minor fix
* Update xiaomi.py
* Update xiaomi.py
Changes made per comment
* Update xiaomi.py
* Don't update on add.
Jason Hu
Mattias Welponer
Anders Melchiorsen
Matthew Garrett
Daniel Perna
huangyupeng
Marcelo Moreira de Mello
Paulus Schoutsen
Philipp Schmitt
Joakim Sørensen
Giuseppe
Paulus Schoutsen
Robin
hanzoh
Ville Skyttä
Fabian Affolter
iliketoprogram14
starkillerOG
Paul Klingelhuber
Diogo Gomes
sjabby
Andrey
Tommy Jonsson
Luke Fritz
Aaron Bach
cdce8p
nielstron
pepeEL
Paul Stenius
Robert Svensson
shker
William Scanlon
David Worsham
Klaudiusz Staniek
Andy Castille
David Thulke
Leonardo Brondani Schenkel
Yevgeniy
Carl Chan
Daniel Shokouhi
Sebastian Muszynski
Vignesh Venkat
Hmmbob
Colin O'Dell
Sriram Vaidyanathan
Alex Barcelo
Pascal Vizeli
MizterB
Tom Harris
Matt Snyder
Robert Kiss
Matt LeBrun
Martin Hjelmare
Luc Touraille
Adam Mills
dreizehnelf
b3nj1
Bob Clough
Thibault Cohen
Dejan Dakić
gstorer
Raoul Teeuwen
Jeff Irion
Kees Schollaart
Matt Schmitt
Petro31
Teemu R
Johan Bloemberg
c727
John Mihalic
Albert Lee