The battery level sensor is broken because the logic for determining
if the battery is charged accessed the wrong variable. This one
character fix makes it work again.
* Update requirements
Updated requirements
* Add attributes
Add firmware and config version attributes
* Small bump for aioharmony
Small version bump increase for aioharmony
* Order ATTR constants
* Add the service
Add service change_channel
* Fix requirements file
For some reason aioharmony ended up in there as a duplicate. Fixed it.
* Updates based on review
* Upgrade greeneye_monitor to 1.0
This is a breaking change; it causes the `serial_number` field in
configuration to be treated as the full 8-digit serial number rather
than the last 5 digits as was previously done, which results in the unique
identifiers for the sensors being different. (Fixing them up in
`config/.storage/core.entity_registry` before rebooting into the updated
version seems to prevent any weirdness.)
The last-5-digits behavior was a result of me misunderstanding the packet
format docs and not realizing that the true serial number was split across
two fields. In addition to being confusing (see
https://community.home-assistant.io/t/brultech-greeneye-issues/86852), it
was technically incorrect. The `greeneye_monitor` platform was just introduced
in 0.82, so it seems like the kind of thing that's best to fix now while
adoption is relatively low rather than later when somebody runs into it
as more than just a point of confusion.
* Switch to 8-character string
* Coerce to int
* Remove now-unnecessary cast
* Update doorbird events to include URLs on event_data as shown in documentation.
(cherry picked from commit 2405bc96fe)
* Format timestamp
* Update timestamp
* Lint
* catch TypeError's in addition to ValueError's in response from unifi access point
sometimes unifi's access point returns incomplete json which results in a TypeError because ssid_table is None
* fix syntax error
* Preparing for transition to config flow
Added multiple gateway support
Reworked parameter flow to platforms to enable multiple controllers
Breaking change to config, now a list of gateways is expected instead of a single config
* Updated coveragerc
Added new location of fibaro component
* Fixes based on code review and extended logging
Addressed issues raised by code review
Added extended debug logging to get better reports from users if the device type mapping is not perfect
* Changhes based on code review
Changes to how configuration is read and schemas
Fix to device type mapping logic
* simplified reading config
* oops
oops
* grr
grr
* change based on code review
* changes based on code review
changes based on code review
This lane ended up calling vars(transport) on an asyncio Transport
object. In a standard setup, that's a python object provided by syncio,
and it works. Home Assistant injects uvloop into asyncio, which makes this
a Python C object, and those don't support vars().
* Add mysensors state update delay
* Schedule state update after delay to avoid updating state multiple
times during the same short timespan.
* Code review
* reconfigure zha device service
add log line to reconfigure service for consistency
* add entity functions to support new services
* added new services and web socket api and split them into their own module
* support manufacturer code
logging to debug
get safe value for manufacturer
* update services.yaml
* add comma back
* update coveragerc
* remove blank line
* fix type
* api cleanup - review comments
* move static method to helpers - review comment
* convert reconfigure service to websocket command - review comment
* change path
* fix attribute
* Change state() to try/except to catch KeyError
When Tautulli is up but Plex is down, the API doesn't return a 'stream_count' key. This causes calls to state() to raise KeyError exceptions. The new code includes a try/except to catch the KeyError and return -1 signifying that the Tautulli API cannot talk to Plex
* Update tautulli.py
If a network_key is not configuired, the following error is logged:
TypeError: expected bytes, NoneType found
Exception ignored in: 'libopenzwave.str_to_cppstr'
TypeError: expected bytes, NoneType found
We don't need to set the key if it's None, let's skip in that case.
* fix cla-bot
* fix bug introduced after linter complaint
* merge two components into one
support telnet port configuration
* remove obsolete nadtcp component. nad component must be used instead.
* back to correct nad_receiver version
* Initial pass of cleanup for shabbat_times
* Switch to async defs
* First pass of unit tests + fixture data
* Completion of first round of unit tests, 100% passing
* Unit tests for state restoring
* Style fixes
* More style fixes
* Lint fix
* Add upcoming candelighting and havdalah sensors
* Add unit tests, remove havdalah offset
* More unit tests + small bugfix for weekly_portion
* Add issur melacha sensor
* Remove old shabbat_times work-in-progress files
* Bump required version of hdate
* Add havdalah offset config parameter
* Bump hdate version required
* Pin hdate requirement
* Lint fixes
* Changes based on review + API changes for hdate 0.8.7
* Add three-day holiday unit tests
* Remove debugging line
* Add missing docstring
* Fix doc lint comment
* Update googlehome.py
Added name from bluetooth device to attributes
* Update homeassistant/components/device_tracker/googlehome.py
Check if key exists before assigning name
Co-Authored-By: cliffordwhansen <clifford@nighthawk.co.za>
* Dont load if not in config
* Adding config options for sensors
* Fixed mistake with iterating over wrong things
* lint
* lint
* Setting None state
* Using .get when fetching optional config
The mychevy service is notoriously unreliable, often only having 50% uptime.
Previously a persistent notification was emitted when the platform errored out.
Users have found that is happening too often, so instead log an error when
this happens instead.
The accent must be removed (Léa -> Lea) just like the other voices (eg. Celine, Peneloppe) to match with Amazon voices ID.
Fun fact: there is no alternative name for "Léa" on Amazon Polly documentation: https://docs.aws.amazon.com/en_us/polly/latest/dg/voicelist.html, probably just omitted.
Mitigation: alternative voices (with and without accents) can be put into `SUPPORTED_VOICES`, both `voice.get('Id')` and `voice.get('Name')` must be then checked for a match.
This fixes#19802.
Thank you 👍
* added zwave lock state from alarm type workaround
* fixed test indents
* more linting fixes
* one more linting fix
* simplified logic
* fixed lint new lines
* fixed merge conflict issue
* fixed definition of _alarm_type_workaround in zwave lock
* added support for homekit security systems
* fixed linting issues
* fixed indentation issues
* simplifired logic on homekit_controller alarm controller panel
* cleaned up battery level const on homekit controller alarm control panel
* Add optional country parameter
mychevy 1.2.0 provides the ability to work in canada as well as the us
(there are different service urls for each region). This creates a new
config option to enable it.
* Update mychevy.py
* Moved component to a package and added a services.yaml file.
* Fixing coverage issue and grammar issue on the services.yaml file.
* Fixed typo in the services.yaml file.
* Alexa: implement auth and proactive ChangeReport messages
* refactor after rebase from dev to use the new AlexaDirective and Response classes
* move to aiohttp; cleanup
* better function name
* move endpoint to config
* allow passing token function
* remove uneeded state get
* use iterable directly
Co-Authored-By: abmantis <abmantis@users.noreply.github.com>
* missing delete from previous commit
* checks for when user has no auth config
* update cloud component
* PR suggestions
* string lint
* Revert "string lint"
This reverts commit a05a1f134c9ebc7a6e67c093009744f142256365.
* linters are now happier
* more happy linters
* use internal date parser; improve json response handling
* remove unused import
* use await instead of async_add_job
* protect access token update method
* add test_report_state
* line too long
* add docstring
* Update test_smart_home.py
* test accept grant api
* init prefs if None
* add tests for auth and token requests
* replace global with hass.data
* doc lint
* awair: do not choke on no data
The awair API returns an empty response for various air data queries
when a device is offline. The underlying library (python_awair) does
not directly inform us that a device is offline, since we really can
only infer it from an empty response - there is no online/offline
indicator in the graphql API.
So - we should just ensure that we do not attempt to update device state
from an empty response. This ensures that the platform does not crash
when starting up with offline devices, and also ensures that the
platform is marked unavailable once devices go offline.
* Fix typo
Further proof that coding after 10pm is rolling the dice.
* Added a new service for calling custom PGM functions.
* Fixed lint issues
* Fixed lint issues reported by travis-CI
* Fixed style issue.
* Complete rename of attribute.
* Add ness alarm control panel using nessclient
* indenting
* .
* Remove availability functionality, will improve and add back in another PR
* Use call_count
* lint
* lint
* Review changes
* Lint
* Bump nessclient to 0.9.8
* Bump nessclient to 0.9.9
* Remove from .coveragerc
* some minor tests refactor
* async/await refactor
* toggle have not brightness
* test for race condition in unknown device
* test for 'no_command' and 'not_connected'
* test for race condition in unknown device
* sensor events are handled in sensor devices, RflinkDevice handle
command events
* test race conditions & bogus entity remove
* two more tests
* Test race condition for unknown components
* Test cleanup for `commands events` and `sensor events`
* ADS light breaks if optional parameter adsvar_brightness is not set
Just a small change to prevent exception if optional parameter adsvar_brightness is not set
* corrected blank lines
* Use aioharmony for async
Use aioharmony to interact with Harmony hub. Due to this following improvements:
-) Setting of available state for entity
-) Automatic config update if configuration changes (including updating file containing config)
-) Allow using of device name instead of number
-) When sending command with repeat, nothing else will be able to put a IR command in between
* Requirements updated
* Version update for fix
* Mainly cleanup
* Update requirements
Updated requirements
* Fixed lint issue
* Small bump for aioharmony
Small version bump increase for aioharmony
* Updated based on review
* added components and requirement
* change config to allow the definition of multiple switches without redefining the gateway
* dont assume false state
fix default value
* added exclude to coveragerc
* sorted imports
* review fixes
* review fixes
* bugfix
review fixes
* review fix
* Updated version to 0.9.3
Adjusted climate component due to changes in the underlying library.
* Climate.KNX: fix updating view when operation mode is changed due to refactoring
* Addressed review comments
* Added validation for config.
Rewrote the tests a bit
the 'wait for the timer to finish' part of the test is now it's own test.
The rest is a sequence of fire/assert. Which i rewrote to a loop to
reduce the amount of duplicate code
* Initial commit of LCN component and light platform
* Corrected pre-review comments
* Fixed dimming behaviour in combination with transitions for lcn lights
* Removed unused logger
* Combined __init__.py and core.py into lcn.py component. Bumped to pypck==0.5.6
* Fixed .coveragerc
* Bumped to pypck==0.5.7
* Bump to pypck==0.5.8
* Fixed requirements_all.txt
* Moved unique generation of connection names to config schema's validator
* Minor changes due to review comments.
Bump to pypck==0.5.9.
* Address_connection is passed into LcnDevice
* Set should_poll property on LcnDevice to return False
* Moved platform config validation to component. Load platform using discovery helper
* Furtehr changes due to the review
* Light configuration is set required as there are no other platforms up to now
* Fix shuffle/random status
MPD always shows true for shuffle. For some reason casting the 0 or 1 as a boolean does not work. Now returns 'true' or 'false' based on the value of 'random'.
* Update homeassistant/components/media_player/mpd.py
Change to correct way of returning shuffle boolean. 'random' needs to be cast as an integer before being cast as a boolean.
Co-Authored-By: apetrycki <34962392+apetrycki@users.noreply.github.com>
* Remove incorrect string code
Original fix method returns a string instead of a boolean. Removed in favor of MartinHjelmare's method.
* Update pylaunches dependency to 0.2.0
Update launch library to use pylaunches 0.2.0 as a dependency. launch_time sensor attribute will now be passed in ISO format, allowing for templating/easier automating with this attribute.
* Update pylaunches to 0.2.0
* Bluetooth tracker: add device_id configuration option
Makes the device id that bluetooth tracker is using configurable instead
of using the first available device.
* Remove unncessary default in config.get
It is already handled in the configuration validation.
* Improve Lutron RadioRA2 support, adding switch and scene support.
- Update the version of pylutron to 0.2 which has various bug fixes.
- Switch to pylutron's per-device subscribe
- Add switch support, and configure any non-dimmable output as a switch.
- Add scene support, using any configured keypad button with a corresponding LED as a scene.
* Fixes for comments in pull request home-assistant/home-assistant#18330
* More fixes for comments in pull request #18330
* Remove unused imports
* Cleanup in docstrings for Lutron scene support.
* add hub- and device-info
* attempt to make I/O outside event loop
* add_executer_job
* coroutines
* async_get_hubs
Co-Authored-By: fredrike <fredrik.e@gmail.com>
* asyncio fixes
* do device_info IO when device is discovered
* it's called async_add_executor_job
* nicer unique_id
* add comment
* it's called `async_add_executor_job`
* hub always contains 'name'
* await each new device
* add comment to why gather is bad
The subnode id for the motion enable node of Insteon 2844-222 motion sensor II on the ISY is 'D'. The binary_sensory/isy994.py assumed this value will be an integer rather than hex and fails. Changing line 55 to subnode_id = int(node.nid[-1], 16) fixes the issue.
* Remove timer logic from sensor class
Proposed fix for issue #10500
* Updating the tests to remove timer logic
* Removing unecessary dependancy
* Fixing requested changes
* Commit to try to fix the CLA ?
* Added Lutron Homeworks components.
* Made all requested changes other than config.
* Removed commented out code.
* Removed binary_sensor.
Implemented new signal/events for button presses.
Cleaned up some data passing.
* Fixed minor formatting.
* Got rid of unused config stuff.
Reordered imports.
* Missed removing vol, and forgot an extra line.
* More requested changes
Removed HomeworksController, it wasn't needed.
* Removed stale code.
* Imperative doc change.
* Disable creating port mappings from UI, add discovery from component
* Remove unused constant
* Upgrade to async_upnp_client==0.13.6 and use manufacturer from device
* Upgrade to async_upnp_client==0.13.7
In HomeAssistant 0.84.3, the range filter would not work due to the unexpected precision filter parameter.
The default range scheme has been edited to remove the unexpected precision parameter.
Verified and tested.
* added new sensor platform to expose Islamic prayer times
* added new sensor platform to expose Islamic prayer times
* updated tests according to feedback
* make prayer_times_info a public attribute
* remove stale comments
* * Rename ocr.png to ssocr-(entity_name).png to allow multiple seven_segments instances to run without overwrting each other's data.
* Update seven_segments.py
* Update seven_segments.py
* Use string formatting
* Add Mythic Beasts DNSAPI Component
* Added timeout, and tests for exceptions while updating
* Move API to external module
* Move mbddns import into function
* Updated tests to mock out mbddns library
* Implement async_configure() method for ZHA entities.
Allow attribute reporting configuration to be stored as dict of zha
entity.
* Update ZHA platform to use new attribute reporting configuration.
* Use const declaration instead of magic numbers.
* Add support for manufacturer_id in ZCL attribute reporting configuration.
* Refactor async_configure() method.
Rename attribute reporting dict to zcl_reporting_config.
* Updates to Harmony for web sockets
Updates to harmony to use web sockets with async
* Lint
* Small fixes
* Fix send_command
Continued improvements:
-) Fixed send_command
-) Get HUB configuration during update in case it was not retrieved earlier (i.e. HUB unavailable)
* Further improvements
Completely removed dependency on __main__ for pyharmony, instead everything is now done from the HarmonyClient class.
Writing out Harmony configuration file as a JSON file.
Using same functionality to determine if activity provided is an ID or name for device, allowing send_command to receive a device ID or device name.
* Point requirements to updated pyharmony repo
Updated REQUIREMENTS to point to repository containing the updates for pyharmony.
* lint
lint
* Small fix for device and activity ID
Small fix in checking if provided device or activity ID is valid.
* Pin package version
* No I/O in event loop
* Point at HA fork with correct version bump
* Fix req
* Adding sensor for SolarEdge Monitoring API support
* Adding support for Rova garbage calendar
* Update solaredge to pass lint and flake8
* Added solaredge.py to .coveragerc
* Added extend for Voluptuous schema
* Fixed styling issues
* Removed rova.py for later feature
* Replaced API requests with python pip package
* Fixed styling issues
* Updated to new async syntax
Added async_update to sensor class
Added Throttle to SolarEdge data update
Added CONF_NAME to platform settings
Added credentials check for api
Minor code style changes
* Remove unnecessary debug logging
* Updated dict keys
* Added SCAN_INTERVAL
Updated platform setup
* Remove DOMAIN variable
Correct import for PLATFORM_SCHEMA
* Change some debug to error messages
Correct return statements
Remove initial update call
* Fix pylint and flake8 errors
* WeMo - Various fixes and improvements
Various fixes & improvements to the WeMo components, including:
-- Fixes to rediscovery
-- New reset filter service for the WeMo Humidifier
-- Switched the remainder of the WeMo components to async IO
-- Removed any remaining IO in entity properties and moved them to the polling/subscription update process
* WeMo - Fix pywemo version and remove test code from WeMo fan component
* WeMo Humidifier - Add services.yaml entry for reset filter life service
* WeMo - Update binary_sensor component to use asyncio
* WeMo - Add available property to binary_sensor component
* WeMo - Fixed line length issue
* WeMo - Fix issue with discovering the same device multiple times
* WeMo - Fix for the fix for discovering devices multiple times
* WeMo - Fix long lines
* WeMo - Fixes from code review
* WeMo - Breaking Change - entity_ids is now required on wemo_set_humidity
* WeMo - Code review fixes
* WeMo - Code review fixes
* WeMo - Code review fixes
* complete(?)
* fixed linting
* update requirements
* added to coveragerc
* fixed linting
* added ability to set custom name
* fixed linting
* added filter
* spacing
* Added list of possible fuels
* Minor updates
In HomeAssistant 0.84.3, the range filter would not work due to the unexpected precision filter parameter.
The default range scheme has been edited to remove the unexpected precision parameter.
Verified and tested.
* Adjusted api for new library version.
* Added support for output monitoring. Added initial status check for the alarm.
* Added default values to the configuration as per review notes.
* added gtt sensor
* removed trailing space
* updated requirements_all
* fixed two errors in the code style
* fixed imperative in docstring
* disabled pylint false positive
* fixed description on top of the file
* added files to .coveragerc
* fixes
* linting
* fixed linting 👍
* left a trailing space, now it's gone.
* fix
* Provide charging indicator for mychevy
This expands the mychevy sensor for the battery level to also know if
the system is currently charging to get the correct icon.
* address review feedback
* Added motion, speed and battery attributes.
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
When editing an entity in the frontend dialog, pressing save causes a "save failed: Entity is already registered" error. This is because the frontend always sets `name` and `new_entity_id` in the websocket command even if they haven't been changed. This adds a check that the `new_entity_id` is actually different from `entity_id` before erroring that the `new_entity_id` is already registered.
* Added brottsplatskartan sensor
* Update brottsplatskartan sensor
* Remove redundant configuration checks.
* Set attributes during initialization.
* Setup brottsplatskartan module in setup_platform().
* Just do a simple return, no need for returning false.
* Remove file that was used during testing
* Better variable name and remove excessive newline.
* More updates to brottsplatskartan
* Import uuid at the top of the module.
* Use sensor as domain.
* Don't fire custom events.
* Remove period from logging message.
* Adding validation for area parameter
* Validate empty area configuration
* Fixing indentation.
* Fixing the config schema
* Adding ambient_station.py sensor and updating requirements file
* Cleaning up code and fixing flake8 warnings
* Fixing flake8 and pylint warnings
* Adding ambient_station.py sensor and updating requirements file
* Cleaning up code and fixing flake8 warnings
* Fixing flake8 and pylint warnings
* Fixing bug, things are working well now
* removing nosetests file
* Adding changes as requested in pull request #18551
* Updating with more change requests from PR code review
* Removing SCAN_INTERVAL from PLATFORM_SCHEMA
* Removing unused import
* Adding platform schema validation for monitored_conditions and conf_units
* Updating link to documentation in doc-string. File already named in doc repo
* Only setup platform if component can successfully communicate with API
* Inverting check for platform setup success
* Adding basic Plum Lightpad support - https://plumlife.com/
* Used Const values
is_on is a bool
* Added LightpadPowerMeter Sensor to the plum_lightpad platform
* Moved to async setup, Introduced a PlumManager, events, subscription, Light and Power meter working
* Added PlumMotionSensor
* Added Glow Ring support
* Updated plum library and re-normalized
* set the glow-ring's icon
* Naming the glow ring
* Formatting and linting
* Cleaned up a number of linting issues. Left a number of documentation warnings
* setup_platform migrated to async_setup_platform Plum discovery run as a job
* bumped plumlightpad version
* On shutdown disconnect the telnet session from each plum lightpad
* Cleanup & formatting. Worked on parallell cloud update
* Moved setup from async to non-async
* Utilize async_call_later from the helpers
* Cleanedup and linted, down to documentation & one #TODO
* Remove commented out debug lines
* Fixed Linting issues
* Remove TODO
* Updated comments & fixed Linting issues
* Added plumlightpad to requirements_all.txt
* Fixing imports with isort
* Added components to .coveragerc
* Added PLUM_DATA constant for accessing hass.data[PLUM_DATA]
* used dictionary syntax vs get(...) for config
* Linting needed an additonal line
* Fully async_setup now. removed @callback utilize bus events for detecting new devices found.
* Upgraded to plumlightpad 0.0.10
* Removed extra unused PLATFORM_SCHEMA declarations
* Moved listener attachment to `async_added_to_hass` and removed unused properties & device_state_attributes
* Utilized Discovery when devices were located
* Linting and cleanup
* used `hass.async_create_task` instead of `hass.async_add_job` per Martin
* Removed redundant criteria in if block
* Without discovery info, there is no need to setup
* Better state management and async on/off for Glow Ring
* renamed async_set_config back to set_config, fixed cleanup callback and Plum Initialization
* Fixed flake8 linting issues
* plumlightpad package update
* Add 'motion' device_class to Motion Sensor
* Fixed last known Linting issue
* let homeassistant handle setting the brightness state
* String formatting vs concatenation
* use shared aiohttp session from homeassistant
* Updating to use new formatting style
* looks like @cleanup isn't neccesary
* ditch the serial awaits
* Ensure async_add_entities is only called once per async_setup_platform
* Creating tasks to wait for vs coroutines
* Remove unused white component in the GlowRing
* Used local variables for GlowRing colors & added a setter for the hs_color property to keep the values in sync
* Linted and added docstring
* Update the documentation path to point to the component page
* Removed the extra sensor and binary_sensor platforms as requested. (To be added in later PRs)
* Update plum_lightpad.py
* Update plum_lightpad.py
* Fixed manual alarm control panel restore state
* Revert "Fixed manual alarm control panel restore state"
This reverts commit 61c9faf434.
* Fixed manual alarm control panel's state restore
* Set InsteonEntity name to be combo of description and address.
ie "LampLinc Dimmer 26453a" or "Keypad Dimmer 291abb_2"
Using a centralized network name
* Updated the name to have a more contextual references for device
functions then just the group id.
* Cleanup for hound
* Removed the _generate_network_address function. Not used anymore
* Cleanup for lint
* clean for hound
* Moved descriptor mapper to be a class variable of the InsteonEntity in order to fix lib loading issue for lint
* Well, moved DescriptorMapper instance to a function variable now...
* fix hound
* Lint Cleanup
* Clean up docstrings
* Simplify Label lookup based on state name
* Add custom component to core
* Add pyrail to reqs
* Format & lint
* Sort nmbs.py into place on coveragerc
* Only set up station live if provided
* Only set up sensor if config is provided
* Fix line too long linting error
* PR Remarks
* Add docstrings
* Fix hound line to long error
* Fix quotes
* Rebase coveragerc
* PR Review
* Init empty attrs
* Dont include delay if there is none
* PR review
* Safer check
* Rebase reqs
* Generate req
* Update homeassistant/components/sensor/nmbs.py
Co-Authored-By: thibmaek <thibault.maekelbergh@iCloud.com>
* PR remarks
* Update synology_chat.py
* Added verify_ssl option to notify.synology_chat
Python requests will verify ssl by default, this configuration options allows the user to specify if they want to verify ssl or not. Non breaking change, default is True - do verify ssl.
* Feature: support for the HK AVR
* Remove testcode
* Feature: support for the HK AVR
* Remove testcode
* Added checklist
* Review fixes whitespaces
* Lint fixes
* Review fixes, add current source
* Remove unused imports
* Review fixes; State constants, dict[key]
* More review fixes, Unknown state and Sources
* Review fix; rename devices to entities
* Add websocket-based non-polling variant for songpal
* linting fixes
* changes based on Martin's feedback
* Fix linting
* add backoff timer for reconnects, fix variable naming (I thought that this wouldn't matter for internals..)
* Remove poll configuration variable
* bump the version just to be sure, the previous release lacked a version file (required for setup.py)
* event foundation
* implement quirks
* lock zha-quirks version
* allow quirks handling to be toggled on and off
* revert event commit
* disable warning
* update requirements_all
* Remove fix in favor of #19141#19141 should be what ultimately corrects this issue.
* review comment
* Enable alarmdecoder to see open/close state of bypassed zones when armed
The alarmdecoder component already reported RF state bits as attributes. If the user knows which loop is set up for the zone in the alarm panel, they can use that information to tell whether the zone is open or closed even when the system is armed by monitoring the appropriate attribute. That’s awkward, so this commit enables the user to simply configure which loop is used and the component will update the state itself.
* Simplify, also it's more correct to treat it as a state change rather than a
permanent state, since it's possible the decoder might miss some events.
* Remove relative import
* Add MVP
* Remove unused code
* Fix
* Add force back
* Fix tests
* Storage keyed
* Error out when storage doesnt find config
* Use old load_yaml
* Set config for panel correct
* Use instance cache var
* Make config option
This works by adding `?check_same_thread=False` to the sqlite
connection string, as suggested by robbiet480@.
It upgrades pygtfs from homeassitant's forked 0.1.3 version to 0.1.5.
Fixes#15725
* radiotherm: bump version to 2.0.0
* radiotherm: change handling of transient errors from tstat
Radiotherm 2.0.0 now throws an exception when a transient error is
detected, instead of returning -1 for the field where the error was
detected. This change supports handling the exception.
* Fix google assistant request sync service call
* More descriptive services.yaml
* Update services.yaml
* Update __init__.py
* Update request sync service call timeout
Change from 5s to 15s to allow Google to respond. 5s was too short. The service would sync but the service call would time out and throw the error.
* Add Philips Moonlight Bedside Lamp support
* Update comment
* Make hound happy
* Wrap the call that could raise the exception only
* Remote blank line
* Use updated python-miio API
* Set lock status correctly for Schlage BE469 Z-Wave locks
PR #17386 attempted to improve the state of z-wave lock tracking for
some problematic models. However, it operated under a flawed
assumptions. Namely, that we can always trust `self.values` to have
fresh data, and that the Schlage BE469 sends alarm reports after every
lock event. We can't trust `self.values`, and the Schlage is very
broken. :)
When we receive a notification from the driver about a state change,
we call `update_properties` - but we can (and do!) have _stale_
properties left over from previous updates. #17386 really works best
if you start from a clean slate each time. However, `update_properties`
is called on every value update, and we don't get a reason why.
Moreover, values that weren't just refreshed are not removed. So blindly
looking at something like `self.values.access_control` when deciding to
apply a workaround is not going to always be correct - it may or may not
be, depending on what happened in the past.
For the sad case of the BE469, here are the Z-Wave events that happen
under various circumstances:
RF Lock / Unlock:
- Send: door lock command set
- Receive: door lock report
- Send: door lock command get
- Receive: door lock report
Manual lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Keypad lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Thus, this PR introduces yet another work around - we track the current
and last z-wave command that the driver saw, and make assumptions based
on the sequence of events. This seems to be the most reliable way to go
- simply asking the driver to refresh various states doesn't clear out
alarms the way you would expect; this model doesn't support the access
control logging commands; and trying to manually clear out alarm state
when calling RF lock/unlock was tricky.
The lock state, when the z-wave network restarts, may look out of sync
for a few minutes. However, after the full network restart is complete,
everything looks good in my testing.
* Fix linter
* Automatically detect if ipv4/ipv6 is used for cert_expiry
Fixes#18818
Python sockets use ipv4 per default. If the domain which should be checked
only has an ipv6 record, socket creation errors out with
`[Errno -2] Name or service not known`
This fix tries to guess the protocol family and creates the socket
with the correct family type
* Fix line length violation
* Fix unavailable
Change setting to unavailable when getting request exceptions only after 1 minute has past since 1st occurrence.
* Put common code in _check_state_available
Put common code to determine if available should be set to False in method _check_state_available
* Unique ID support
New unique ID support, based on hub's serial number and device's permanent ID
* Fixes, showing attributes
Minor fixes
Showing room, hub, fibaro_id for easier mapping and finding of devices
* Update fibaro.py
* Add support for multiple RainMachine controllers
* Member comments
* Member comments
* Member comments
* Cleanup
* More config flow cleanup
* Member comments
This bumps to the new version of the waterfurnace API. In the new
version the unit id is no longer manually set by the user, instead it
is retrieved from the service after login. This is less error prone as
it turns out discovering the correct unit id is hard from an end user
perspective.
Breaking change on the config, as the unit parameter is removed from
config. However I believe the number of users is very low (possibly
only 2), so adaptation should be easy.
This bumps to the new version of the waterfurnace API. In the new
version the unit id is no longer manually set by the user, instead it
is retrieved from the service after login. This is less error prone as
it turns out discovering the correct unit id is hard from an end user
perspective.
Breaking change on the config, as the unit parameter is removed from
config. However I believe the number of users is very low (possibly
only 2), so adaptation should be easy.
After six months the chevy website finally has been reimplemented to
something that seems to work and is stable. The backend library has
been updated thanks to upstream help, and now is working again.
* move component to a package
* move TelldusLiveEntry to separate file
* refactor
* move entities from a shared container
* using the dispatch helper instead for communication between component and platforms
* updated covereagerc and codeowners
* suggestions from MartinHjelmare
* don't make update async
* "Strip is good!"
* remove the need to have query feature support
Some InfluxDB servers don't have /query support feature but are still valid servers for storing data.
Usually those servers are proxies to others timeseries databases.
The change proposes to still validate the configuration but with less requirements on the server side.
* `.query` call is replaced by `.write_points`
* no more query call in the influxdb component. remove test
* reset mock after the setup and before the test
* remove unused import
* reset mock stats after component setup
* Updated Yale Smart Alarm platform to use Yale's new API which replaces the deprecated version. Bumped yalesmartalarmclient to v0.1.5.
* Update requirements
* Add new events for automation trigger and script run, fix context for image processing, add tests to ensure same context
* remove custom logbook entry for automation and add new automation event to logbook
* code review updates
Paulus Schoutsen
Anders Melchiorsen
Otto Winter
carstenschroeder
Alok Saboo
Caleb Dunn
Rohan Kapoor
ehendrix23
Sean Dague
Robert Svensson
David F. Mulcahey
Jonathan Keljo
Matt Snyder
Tommy Jonsson
Thomas Delaet
Sriram Vaidyanathan
Austin Drummond
Alexei Chetroi
Louis-Etienne
Ville Skyttä
Paulus Schoutsen
pbalogh77
Bas
Andrew Chatham
Fredrik Erlandsson
Martin Hjelmare
Mike Miller
Antoine GRÉA
Jarle B. Hjortand
Sebastian Muszynski
Eliseo Martelli
Sören Oldag
Fabian Affolter
Jason Hu
Tyler Page
mindigmarton
Thomas Hervé
Abílio Costa
Kevin Fronczak
Sergey Rymsha
SNoof85
arigilder
so3n
Daniel Shokouhi
Clifford W. Hansen
Richard Mitchell
Roy Duineveld
Jérôme Wiedemann
Aaron Bach
Rendili
Florian Ludwig
Pascal Vizeli
Alistair Galbraith
Malte Franken
Pierre
Steven Looman
Lars Lydersen
emontnemery
kennedyshead
Rene Nulsch
Vincent KHERBACHE
koomik
sander76
cdheiser
Johann Kellerman
Mattias Welponer
keesak
cdce8p
Maciej Bieniek
Daniel Høyer Iversen
Dan Cinnamon
ctborg
Adam Belebczuk
Andrew Hayworth
mvn23
Daniel Perna
Nick Whyte
Daniel Chesterton
javicalle
Robin
Michael Dubno
Jc2k
Thom Troy
Pär Svanström
Joakim Sørensen
John Mihalic
Markus Ressel
Marvin Wichmann
Marius Retegan
Robbert Müller
Marcelo Moreira de Mello
Andrei
Andre Lengwenus
Max Rydahl Andersen
Ioan Loosley
Simon Nørager Sørensen
FieldofClay
apetrycki
Ted Sluis
DoloresHA
Heine Furubotten
Igor Motov
mreiling
kdvlr
Steve9F
Diogo Gomes
William Comartin
Andrew Loe
Panagiotis Panagiotopoulos
Dom
uchagani
Mathieu Velten
jumpkick
Bob Clough
Jens
Gido
timkoers
Morten Lüneborg
Nick Horvath
c-soft
Erik Eriksson
PeteBa
Glen Takahashi
Christian Biamont
tmd224
Colin Harrington
liaanvdm
Brian Towles
MaxG88
Eric Nagley
Luca Angemi
Thibault Maekelbergh
bremor
damarco
Tom Harris
Sander Geerts
Andrey Kupreychik
Teemu R
Lukas Barth
Jason Hunter
Yaron de Leeuw
clayton craft
Ludovico de Nittis
Bas Schipper
edif30
speedmann
Pierre Ståhl
Matthew Garrett
Bram Kragten
Sean Wilson
Martin Gross
photinus
Jeff Irion
Sébastien RAMAGE
Glenn Waters
jxwolstenholme
majuss
Emil Stjerneman
Pierre Gronlier
Craig J. Midwinter