* Improve amcrest error handling and bump amcrest package to 1.5.3
amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter.
Get rid of persistent_notification.
Errors at startup, other than login errors, are no longer fatal.
Display debug messages about how many times an error has occurred in a row.
Remove initial communications test. If camera is off line at startup this just delays the component setup.
Handle urllib3 errors when getting data from commands that were sent with stream=True.
If errors occur during camera update, try repeating until it works or the camera is determined to be off line.
Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions.
Make entities unavailable if too many errors occur in a row.
Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again.
Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.)
* Update per review comments
Remove max_errors and recheck_interval configuration variables and used fixed values instead.
Move definition of AmcrestChecker class to module level.
Change should_poll in camera.py to return a fixed value of True and move logic to update method.
* Add Streamlabs Water Monitor
* Fail Streamlabswater component setup when given invalid parameters
The Streamlabs Water component is unable to recover if it is given
an invalid API key or location id so this change is to ensure
we validate they are correct during setup and return a failure
if they are not.
* Prime Streamlabswater component sensors so data is available immediately
The sensors for the component were not causing an immediate load of
data from the API when being set up so there was some lag after
startup before values would show up. This change does an explicit
update when the sensors are setup to ensure data is viewable
immediately after startup.
* Switch Streamlabswater logging to use %s for string formatting
* Update Streamlabswater component with correct dependencies
Dependencies were incorrectly specified using DEPENDS rather
than DEPENDENCIES
* Streamlabswater pull request feedback
Remove detailed class docstrings since they're in the documentation,
reduce code duplication in sensor classes, and remove periods from
the end of log messages.
* Reduce line length in Streamlabswater sensor
* Add docstring on Streamlabswater service callback method
* Get rid of unnecessary initializers in Streamlabswater sensor
* Add manifest file for Streamlabs Water Monitor
* Remove unused REQUIREMENTS
* Added Google Cloud TTS service component feature
* Added Neutral voice gender
* Added line break at the end of files
* Updated CODEOWNERS, reqirements_all.txt and .coveragerc
* Fixed some ci/circleci: static-check errors
* Fixed some ci/circleci: static-check error
* Fixed some ci/circleci: pylint errors
* Fixed some ci/circleci: pylint errors
* * made supported_options const
* fixed direct env variable access
* Fixed import order
* * Component renamed
* Added encoding parameter
* Other fixes
* Changed folder name in .coveragerc
* * Removed whitespaces in blank lines
* Split long line
* Removed whitespaces in blank lines
* ci/circleci: static-check
* Fixed requirements_all.txt
* Added speed, pitch and gain parameters
* Added speed, pitch and gain as supported options
* Split too long line
* * Added profiles parameter
* Changed supported languages and encodings values
* Added parameters validations
* Fixes
* Fixes
* Fixes
* Fixes
* Fixes
* Changed options validation
* Added ToggleEntity save and restore state mechanism
* Revert "Added ToggleEntity save and restore state mechanism"
This reverts commit 0e275014
* Basic local SolarEdge monitoring for energy / power
* Basic local SolarEdge monitoring for energy / power
* generated CODEOWNERS, requirements, excluded tests
* generated CODEOWNERS, requirements, excluded tests
* lint fixes, etc
* lint fixes, etc
* Fix docstyle for init
Of course thats the file I forgot to run tests on
* Load all sensors by default
They use the same API endpoint. This changes was made per https://github.com/home-assistant/architecture/pull/244
* remve unneded date/time
* ran hassfest again
* add throttle when updating
* readd solax, mistakenly removed
* Update sensor.py
* Adds AdGuard Home integration
* 👕 Addresses linting warnings
* 🚑 Fixes typehint in async_setup_entry
* 👕 Take advantage of Python's coalescing operators
* 👕 Use adguard instance from outer scope directly in service calls
* 👕 Use more sensible scan_interval default for sensors
* 👕 Adds specific files to .coveragerc
* ☔ Added tests and small changes to improve coverage
* 🔨 Import adguardhome dependencies at the top
* 🚑 Converted service handlers to be async
* 🔥 Removed init step from config flow
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Revert back to previously used library
* Fix test
* Remove unused import
* Fix import
* Update __init__.py
* Update __init__.py
* Fix test after rebase
* Bumped to version 2.0
* Updated requirements
* Updated requirements and coveragerc
* Removed long lines, changes to coveragerc and requirements
* Fixed under-indented lines
* Fixed invalid syntax
* Updated .coveragerc to include repetier/__init__.py and sensor.py
* Module update
* Rebased to latest dev
* Blank lines fix
* Add missing manifest.json
* Update requirements
* Bumped component to new API module style
* Removed whitespaces and line feeds
* Added missing newline
* Added missing heated chamber sensor
* Fixed wrong indentation
* Various fixes
* Various build fixes
* Clean up
* Load platform only once
* Sort imports
* Add printer api
* Clean up
* Build out sensor classes
* Clarify temperature sensor variable names
* Move constants
* Clean up name
* Run script/gen_requirements_all.py
* Working code, missing auto add of new sensors
* Updated code to return proper device_class and timestamp
* Removed unnessecary code
* Renamed elapsed and remaining sensors
* Dynamically adding sensors as they become available
* Rebased .coveragerc due to conflicts
* Code changes and cleanup
* Removed whitespace and code simplification
* Improved sensors
* Lib update signalling
* Replace reason with changed
* Move imports to top of file
* Add support for secondary temperature reported by some Xiaomi devices
* Bump dependency to v59
* v1 of Azure Event Hub History component
* updates to EH
* small fix
* small updates and changed requirements_all
* new version of Event Hub component
* redid config to just ask names
* small edit
* latest version of EH component
* updated codeowners
* codeowner fix
* typo in domain
* updates based on reviews.
* using built-in jsonencoder for DT
* delete unused import
* Solax inverter direct API
* Linter compliance
* lint++
* move api communication to external lib
* lint++
* requirements
* Revert "requirements"
This reverts commit 82a6c0c095.
* potentially?
* Addressing review comments
* Also update CODEOWNERS
* Only update sensor state if data has changed
* Moved helper functions to const.py
* Removed pypck attribute from LcnDevice
* Bump to pypck==0.6.0
* Added myself as a codeowner
* Moved helper functions to helpers.py
* Added support for MCP23017 I2C GPIO extender.
* Updated .coveragerc to exclude mcp23017 component from tests.
* Generated CODEOWNERS for mcp23017 usign script.
* Removed .svn folder that had been accidentally uploaded.
* Added link to www.home-assistant.io docs in manifest.json
* Fixed logic error in switch platform.
* Cleaned up code and removed unnecessary should_poll() function.
* Limited the options for pull mode to UP and DOWN
* Fixed line too long in binary sensor.
* Fixed line too long on switch.py
* Changed to setup_platform.
* Reorder constants
* Initial commit
* add lastComms and de-lint
* dummy commit
* dummy commit 2
* refactor to temp in favour of battery
* back to battery, and no temp
* use snake_case
* Bump client
* only v3 API exposes device attributes
* delint
* delint2
* Change GeniusSwitch to GensiusBinarySensor
* Use aiozeroconf in preparation for new zeroconf discovery
* Update requirements
* Remove sleep
* Make stop zeroconf a coroutine
* Remove unused import
* Fix aiozeroconf dependency in default_config tests
* updated list of supported fan_modes
* AirBase units does not support Holiday-mode
* AirBase units does not support outside temp
* pydaikin version bump
* don't modify constant
* Update Sesame component to use Candy House's library using the V3 API
* Updated requirements_all.txt
* Fix pylint warning
* Revert back to ATTR_DEVICE_ID
* Added new component meteoalarm
* Update sensor.py
* Update manifest.json
* Update manifest.json
* Update manifest.json
* Added file CODEOWNERS
* Modified some code, thanks @amelchio
* removed Throttle because is not being used anymore
* Update _attributes ad _state
* some cleanup
* Update sensor.py
Change sensor to binarysensor
* Rename sensor.py to binary_sensor.py
rename the file
* Update binary_sensor.py
Removed BinarySensorDevice from class
* Update binary_sensor.py
Made a mistake with BinarySensorDevice
* Update binary_sensor.py
clean up white spaces
* Update binary_sensor.py
Fix BinarySensorDevice
* Update binary_sensor.py
cleanup the import libs
* modified __init__
* fix
* final fix, thanks @amelchio
* forgot to change the sensor.py
* correct some typo in text
* fix typos
* fix another typo
* fix typo
* Updated to the current version of dev
* Added the component to .coveragerc
* Added __init__.py and manifest.json
* Changed the manifest to comply the json format
* Changes in for complete the PEP8 Code
* Fixed the api call to use PyPI package
* Fixed API correrct call
* Fixes for complete the requirements
* Added dependencies in manifest.json
* Changed the __init__.py to complete PEP8
* Simplified the __init__.py
* Runned codeowner script
* executed gen_requirements_all.py
* Direct call for dicts and unit changed to minutes
* Fixed the optional dict call, sorry, my bad, I did not that
* Deleted unused vars
* Changed optional parameter to required
* Remove blank first line
* Onvif camera improvements using zeep
* Fix static code checks
* Make obtain_input_uri async
* Convert several methods to async
* Fix static checks
* Fix static checks
* Fix requirements_all.txt
* Lint improvements
* Async services
* Use onvif-zeep-async and check if PTZ service is available before creating it
* Remove some hacks that are now defined in onvif-zeep-async
* Don't log input, it might contain sensitive information
* Static code analysis fixes
* Run requirements stuff
* Fix
* Remove suds requirement
* Onvif camera improvements using zeep
* Fix static code checks
* Make obtain_input_uri async
* Convert several methods to async
* Fix static checks
* Fix static checks
* Fix requirements_all.txt
* Lint improvements
* Async services
* Use onvif-zeep-async and check if PTZ service is available before creating it
* Remove some hacks that are now defined in onvif-zeep-async
* Don't log input, it might contain sensitive information
* Static code analysis fixes
* Run requirements stuff
* Fix
* Remove suds requirement
* Use dt_util.utcnow
* Platform setup should not have a return value
* Remove explicit dependency to zeep[async]
* Bump onvif-zeep-async to 0.1.2
* Update requirements_all.txt
* Add exception handling
* Fix static checks
* Don't catch generic exceptions
* Update camera.py
* ptvsd debugger component.
* Add test case
* ptvsd as test dependency
* Fix for 3.5
* Fixed bootstrap test
* Use dict direct lookup.
* Don't need to load dependencies.
* Get the test working.
* 3.5 fix
* Set mock return value
* Put tests back, but skip them
* Change log level
* Don't send volume on volume set
This needs updated lib
* Bump version and avoid getting channels explicitly
* Add myself as codeowner
* Use version 0.0.8 instead which doesn't reuse session
Some TV's doesn't play nice with HTTP/1.1 connection
re-use.
* Add new requirement to requirements_all.txt
Improve sdcard sensor so it only sends one command to camera per update as opposed to the four it used to send to reduce network traffic and make data consistent. Also better handle returned values of 'unknown'.
Robert Svensson
Phil Bruckner
William Scanlon
Fabian Affolter
Daniel Perna
Aaron Bach
Andre Lengwenus
z0p
cpopp
Дубовик Максим
michaeldavie
Victor Cerutti
Oliver
David Roberts
Johan Bloemberg
rolfberkenbosch
Paulus Schoutsen
Brandon Davidson
Otto Winter
Franck Nijhof
Maikel Punie
Austin Mroczek
Sören Oldag
Alexei Chetroi
Thomas Hervé
Daniel Høyer Iversen
Anders Melchiorsen
Morten Trab
chmielowiec
Sylvia van Os
Jesse Rizzo
Julien Brochet
David Bonnes
Eduard van Valkenburg
jgriff2
cgtobi
Robin Wohlers-Reichel
Kevin Fronczak
Jardi Martinez
Fredrik Erlandsson
Greg Dowling
András Rutkai
Martin Donlon
Josef Schlehofer
Joakim Sørensen
David McNett
starkillerOG
David F. Mulcahey
Baptiste Candellier
mvn23
Stephen Benjamin
Jason Hunter
Andrey Kupreychik
Jerry Chong
Ville Skyttä
Andrew Sayre
ktnrg45
Julius Mittenzwei
UgaitzEtxebarria
SNoof85
Geert van Horrik
ThaStealth
Brett T. Warden
teliov
Paul Madden
ehendrix23
Penny Wood
Jonas Pedersen
Cyro
Jc2k
Joakim Plate
Alok Saboo
Erik Montnemery