* Avoid creating sockets in homekit port available tests
* prevent new bridge from being setup -- its too fast now that the executor job is gone and it revealed an unpatched setup
When we set up HomeKit, we asked users if they wanted
to create an entry in bridge or accessory mode.
This approach required the user to understand how HomeKit works and
choose which type to create.
When the user includes the media player or camera domains,
we exclude them from the bridge and create the additional entries
for each entity in accessory mode.
HomeKit pairings and accessory ids from versions 0.109 and earlier are no longer
migrated on upgrade. Users upgrading directly to 2021.3 from 0.109
and older should upgrade to 2021.2 first if they wish to preserve
HomeKit configuration and avoid re-pairing the bridge.
This change does not affect upgrades from 0.110 and later.
* Add support for HomeKit doorbell
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* add speaker service for doorbells
* fixed test as doorbell char requires null value
* removed null value for doorbell presses. and removed broken override of default values
Co-authored-by: J. Nick Koston <nick@koston.org>
* Support multiple camera stream in HomeKit
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Revert "Update homeassistant/components/homekit/type_cameras.py"
This reverts commit d7624c5bff.
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* black
* bump pyhap
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add humidifier support to homekit
* spell
* dependencies
* lint
* add linked humidity sensor for humidifiers
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* pylint
* Fix tests
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/homekit/test_homekit.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* lint
* pylint
* push
* test for unavailable linker sensor
* black
* valid values key case
* black
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* black
* coverage
* Set current humidity to 0 if linked sensor removed or unavailable
* use last known humidity instead
Co-authored-by: J. Nick Koston <nick@koston.org>
* Ensure camera stream can be restarted after failure
* If ffmpeg failed to start, was killed, or the iOS device
closed the stream right away, the stream could never
be started until the HomeKit bridge was restarted.
* watch ffmpeg instead of checking only once
* handle forceful shutdowns gracefully
* Increase coverage
* Homekit cameras - Add codecs support
* Add valid_codecs + move audio application parameter
* Increase video bufsize
* Increase audio bufsize
* Update config flow to be aware of the copy option
* Add tests for copy video and audio codec
* remove unused from test
* remove unused from test
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add homekit camera support
* Cleanup pyhapcamera inheritance
* Add camera to homekit manifest
* Use upstream pyhap server handler in homekit
* Remove unused homekit constants
* Fix lint errors in homekit camera
* Update homekit camera log messages
* Black after conflict fixes
* More conflict fixes
* missing srtp
* Allow streaming retry when ffmpeg fails to connect
* Fix inherit of camera config, force kill ffmpeg on failure
* Fix audio (Home Assistant only comes with OPUS)
* Fix audio (Home Assistant only comes with OPUS)
* Add camera to the list of supported domains.
* add a test for camera creation
* Add a basic test (still needs more as its only at 44% cover)
* let super handle reconfigure_stream
* Remove scaling as it does not appear to be needed and causes artifacts
* Some more basic tests
* make sure no exceptions when finding the source from the entity
* make sure the bridge forwards get_snapshot
* restore full coverage to accessories.py
* revert usage of super for start/stop stream
* one more test
* more mocking
* Remove -tune zerolatency, disable reconfigure_stream
* Restore -tune zerolatency
Co-authored-by: John Carr <john.carr@unrouted.co.uk>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Config flow for homekit
Allows multiple homekit bridges to run
HAP-python state is now stored at .storage/homekit.{entry_id}.state
aids is now stored at .storage/homekit.{entry_id}.aids
Overcomes 150 device limit by supporting
multiple bridges.
Name and port are now automatically allocated
to avoid conflicts which was one of the main
reasons pairing failed.
YAML configuration remains available in order to offer entity
specific configuration.
Entries created by config flow can add and remove
included domains and entities without having to restart
* Fix services as there are multiple now
* migrate in executor
* drop title from strings
* Update homeassistant/components/homekit/strings.json
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Make auto_start advanced mode only, add coverage
* put back title
* more references
* delete port since manual config is no longer needed
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Display a QR code for homekit pairing
This will reduce the failure rate with HomeKit
pairing because there is less chance of entry
error.
* Add coverage
* Test that the qr code is created
* I cannot spell
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use f-strings in integrations starting with "H"
* Use f-strings in integrations starting with "I"
* Use f-strings in integrations starting with "J"
* Use f-strings in integrations starting with "K"
* Use f-strings in integrations starting with "L"
* Fix lint error
* Use join instead of f-string in homekit_controller
* Use local variables with f-strings
* Fix lint error
* Escape the characters in f-string
* Sort imports with isort in homeworks light
* Fix pylint error
* Fix broken tests
* Fix broken tests v2
* Fix homekit temperature sensor for round with one decimal
* Removing unnecesary operations
* Adapting tests for new temperature_to_homekit() result precision
* Move more constants to const.py
* Import constants directly from const
* ATTR_ENTITY_ID is not defined in media_player
* MEDIA_PLAYER_PLAY_MEDIA_SCHEMA is still in __init__.py
* Correct imports in tts
* PLATFORM_SCHEMA, SCHEMA is still defined in __init__.py
* Pandora imports several services
* Some additional fixes for move of const in media_player
* Fix hound lengths
* hass.async_add_executor_job
* Fix accessories.run -> async_track_state_change
* Fixed media_player test
* Flags are now local vars
* consistent use of " and '