* Support setting hvac_mode and temp in same set_temperature service call
* Update homeassistant/components/homekit_controller/climate.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit_controller/climate.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Change config entry state to an enum
* Allow but deprecate EntryState str equality comparison
* Test fixes
* Rename to ConfigEntryState
* Remove str comparability backcompat
* Update new occurrences of strs cropped up during review
* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
* Mark entities as unavailable when they are removed but are still registered
* Add sync_entity_lifecycle to collection helper
* Remove debug print
* Lint
* Fix tests
* Fix tests
* Update zha
* Update zone
* Fix tests
* Update hyperion
* Update rfxtrx
* Fix tests
* Pass force_remove=True from integrations
Co-authored-by: Erik <erik@montnemery.com>
* Add support for temperature range in thermostat.
* Add tests for setting temperature range.
* Update Lennox E30/Ecobee 3 tests to reflect new supported feature
* Add support for thermostate mode specific min/max temp values.
Some new HomeKit climate devices, like XiaoMi Air Conditioning Controller P3 are heater-cooler devices rather than
thermostat devices. This commit adds support for the heater-cooler class via homekit_controller.
* Adjust homekit controller pairing errors back to a single step
* adjust test
* Revert "Adjust homekit controller pairing errors back to a single step"
This reverts commit e5ed89bbbb.
* Revert "adjust test"
This reverts commit c2e9f21a8401c144315260f6fdf71ea8060f8ca3.
* adjust
* prune
* prune
* merge
* Update tests
* remove debug
* adjust
* Multiple steps
* adjust the test
* Fix homekit_controller pairing retry
If the device was busy on the first pairing attempt, it
was not possible to retry.
* always restart pairing on recoverable execptions
* move code
* malformed pin is safe to restart
* make busy_error an abort
* switch max retries, simplify tests
* try pairing later
* try pairing later
* merge
* s/tlv_error/protocol_error/g
* Adjust wording
* Removal of extraneous parenthesis
* Process review suggestions
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump aiohomekit to get better reconnection handling and cleaner shutdowns.
* Read the ACTIVE characteristic and set ok/problem state
Also gets test coverage to 100%.
* Use f-strings in integrations starting with "H"
* Use f-strings in integrations starting with "I"
* Use f-strings in integrations starting with "J"
* Use f-strings in integrations starting with "K"
* Use f-strings in integrations starting with "L"
* Fix lint error
* Use join instead of f-string in homekit_controller
* Use local variables with f-strings
* Fix lint error
* Escape the characters in f-string
* Sort imports with isort in homeworks light
* Fix pylint error
* Fix broken tests
* Fix broken tests v2
* Mechanism to rediscover a discovery that was ignored
* Add core config entry tests for new rediscover step
* Add tests for homekit_controller implementation of async_step_rediscover
* Rename rediscover to unignore
* Comment the new ignore/unignore mechanisms
* Update Homekit climate.py to remap current mode
This update changes the mapping of Homekit's Current Mode Heating/Cooling State to show the HASS Hvac_action attribute as "idle" instead of "off" when the returned value is 0.
* Update climate.py
removed imported constant no longer being used (CURRENT_HVAC_OFF)
* corrected update to climate.py
trying again to remove unused constant.
* Update test_climate.py
* removed "change" comment
The added comment describing the change was not needed and should not be included, as it will already be described via "git annotate" (per @jc2k)
* Add simple battery sensor
* Add test for battery sensor based on a real device
* Vary icon based on battery state
* Add test for battery sensory
* Read other battery related states from accessory
* Add a device class to the battery sensor
* Respect the low battery flag from the device
* Stub for polling from a central location
* Allow connection to know the entity objects attached to it
* Move polling logic to connection
* Don't poll if no characteristics selected
* Loosen coupling between entity and HKDevice
* Disable track_time_interval when removing entry
* Revert self.entities changes
* Use @callback for async_state_changed
* Split out unload and remove and add a test
* Test that entity is gone and fix docstring
* Moved climate components with tests into platform dirs.
* Updated tests from climate component.
* Moved binary_sensor components with tests into platform dirs.
* Updated tests from binary_sensor component.
* Moved calendar components with tests into platform dirs.
* Updated tests from calendar component.
* Moved camera components with tests into platform dirs.
* Updated tests from camera component.
* Moved cover components with tests into platform dirs.
* Updated tests from cover component.
* Moved device_tracker components with tests into platform dirs.
* Updated tests from device_tracker component.
* Moved fan components with tests into platform dirs.
* Updated tests from fan component.
* Moved geo_location components with tests into platform dirs.
* Updated tests from geo_location component.
* Moved image_processing components with tests into platform dirs.
* Updated tests from image_processing component.
* Moved light components with tests into platform dirs.
* Updated tests from light component.
* Moved lock components with tests into platform dirs.
* Moved media_player components with tests into platform dirs.
* Updated tests from media_player component.
* Moved scene components with tests into platform dirs.
* Moved sensor components with tests into platform dirs.
* Updated tests from sensor component.
* Moved switch components with tests into platform dirs.
* Updated tests from sensor component.
* Moved vacuum components with tests into platform dirs.
* Updated tests from vacuum component.
* Moved weather components with tests into platform dirs.
* Fixed __init__.py files
* Fixes for stuff moved as part of this branch.
* Fix stuff needed to merge with balloob's branch.
* Formatting issues.
* Missing __init__.py files.
* Fix-ups
* Fixup
* Regenerated requirements.
* Linting errors fixed.
* Fixed more broken tests.
* Missing init files.
* Fix broken tests.
* More broken tests
* There seems to be a thread race condition.
I suspect the logger stuff is running in another thread, which means waiting until the aio loop is done is missing the log messages.
Used sleep instead because that allows the logger thread to run. I think the api_streams sensor might not be thread safe.
* Disabled tests, will remove sensor in #22147
* Updated coverage and codeowners.
* Start preparing for homekit_controller config entries
* Review feedback
* Review feedback
* Only use the vol.strip validator for pairing_code
* CV not required now
* Changes from review
* Changes after review
The Velux ACTIVE gateway uses `C#` rather than `c#` as the name of
the property that holds the count of accessories. Apple's HomeKit docs
suggest that properties should be case-insensitive, so update the
code to not assume the property names are lower case.
* Define the characteristics to poll (or subscribe to) up front
* Configure characteristics immediately instead of during first poll
* Do as much cover configuration upfront as possible
* Remove test workaround as no longer needed
* Remove switch code that is already handled by HomeKitEntity
* Remove lock code already handled by HomeKitEntity
* Remove light code already handled by HomeKitEntity
* Remove alarm code already handled by HomeKitEntity
* Remove climate code already handled by HomeKitEntity
* homekit_controller tests: automatically find entity ids in tests
Some entities use dynamic ids because of the nature of the test fakes it is
hard to predict the name of the entity that will be created. This inspects the
EntityComponent of the domain to find the freshly created entity.
* homekit_controller: Tests can now define their own Service models.
All existing tests use models as defined upstream. But upstream only defines a
few service models. This adds a generic model helper for creating test
service/characteristic models.
* homekit_controller: Add cover tests
* homekit_controller: Add lock tests
* homekit_controller: Add alarm_control_panel tests
* homekit_controller: Update light tests for color_temp.
* Revert "homekit_controller tests: automatically find entity ids in tests"
This reverts commit 506caa4c3e.
* homekit_controller: Mock entity name so entity_id is consistent.
Also remove spurious subclass overrides that are identical to parent class.
* homekit_controler: Make tests less awkward as allowed top level imports
* Add a test for a homekit_controller switch
* Add a test for a homekit_controller lightbulb
* Add a test for homekit_controller thermostat
* Changes from review
* Patch utcnow to known time in HK tests
* Neater fixture use per review
Jc2k
J. Nick Koston
Paulus Schoutsen
jjlawren
Ville Skyttä
Franck Nijhof
Ruslan Sayfutdinov
Erik Montnemery
Jacob Southard
Jacob Southard
Austin Drummond
Anders Melchiorsen
springstan
RogerSelwyn
Yuxiang Zhu
Patryk
Christian Clauss
Bas Nijholt
GaryOkie
tleegaard
Robert Svensson
David Radcliffe
Pascal Vizeli
Penny Wood
cpopp
koreth
Joakim Plate