* Use ServiceValidationError for fan preset_mode
* Use _valid_preset_mode_or_raise to raise
* Move preset_mode validation to entity component
* Fix bond fan and comments
* Fixes baf, fjaraskupan and template
* More integration adjustments
* Add custom components mock and test code
* Make NotValidPresetModeError subclass
* Update homeassistant/components/fan/strings.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Keep bond has_action validation
* Move demo test asserts outside context block
* Follow up comment
* Update homeassistant/components/fan/strings.json
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Fix demo tests
* Remove pylint disable
* Remove unreachable code
* Update homeassistant/components/fan/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Use NotValidPresetModeError, Final methods
* Address comments
* Correct docst
* Follow up comments
* Update homeassistant/components/fan/__init__.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add ZHA test checking light restores with None attributes
* Move shared `core_rs` fixture to `conftest.py`
* Remove special `color_mode` case, use `parametrize` for expected state
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Use fixed quirk IDs for matching instead of quirk class
* Change tests for quirk id (WIP)
* Do not default `quirk_id` to `quirk_class`
* Implement test for checking if quirk ID exists
* Change `quirk_id` for test slightly (underscore instead of dot)
* zha: Add translation to binary sensors
* Add some small test for name
* Add translations for sensors
* Correct some tests
* Adjust summation key
* Add translation keys for button
* Add translation keys to climate
* Add translation keys for cover
* Add translation keys to fan
* Add translations to light
* Add translations for lock
* Add translation keys to number
* Add translationk keys to select
* Add translations for switch entities
* Add translation to alarm control panel
* Map to some more standard device classes
* Use shorter references
* Remove explicit name from identify button
* Correct tests
* Correction after rebase
* Modify test to account for scenario of unknown unsupported attributes
* Add error checking for finding unsupported attributes
* Change comment to clarify zigpy misses an attribute def
This should make it more clear that it's about an unknown attribute (where zigpy doesn't have an attribute definition).
* Increase test coverage
This increases test coverage by doing the following:
- adding the `IasZone` to our test device, so we have a cluster which actually has some attribute definitions
- adding not just an unknown unsupported attribute by id, but also by name
- adding a known unsupported attribute by id and by name
* Fix diagnostics logic
* Cache device triggers on startup
* reorg zha init
* don't reuse gateway
* don't nuke yaml configuration
* review comments
* Add unit tests
* Do not cache device and entity registries
* [WIP] Wrap ZHA data in a dataclass
* [WIP] Get unit tests passing
* Use a helper function for getting the gateway object to fix annotations
* Remove `bridge_id`
* Fix typing issues with entity references in group websocket info
* Use `Platform` instead of `str` for entity platform matching
* Use `get_zha_gateway` in a few more places
* Fix flaky unit test
* Use `slots` for ZHA data
Co-authored-by: J. Nick Koston <nick@koston.org>
---------
Co-authored-by: David F. Mulcahey <david.mulcahey@icloud.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Do not connect to the radio hardware within `_connect_zigpy_app`
* Make `connect_zigpy_app` public
* Create radio manager instances from config entries
* Cache device triggers on startup
* reorg zha init
* don't reuse gateway
* don't nuke yaml configuration
* review comments
* Fix existing unit tests
* Ensure `app.shutdown` is called, not just `app.disconnect`
* Revert creating group entities and device registry entries early
* Add unit tests
---------
Co-authored-by: David F. Mulcahey <david.mulcahey@icloud.com>
* Add the SiLabs flasher as a dependency
* Create a repair if the wrong firmware is detected on an EZSP device
* Update homeassistant/components/zha/strings.json
Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
* Provide the ZHA config entry as a reusable fixture
* Create a separate repair when using non-Nabu Casa hardware
* Add unit tests
* Drop extraneous `config_entry.add_to_hass` added in 021def44
* Fully unit test all edge cases
* Move `socket://`-ignoring logic into repair function
* Open a repair from ZHA flows when the wrong firmware is running
* Fix existing unit tests
* Link to the flashing section in the documentation
* Reduce repair severity to `ERROR`
* Make issue persistent
* Add unit tests for new radio probing states
* Add unit tests for new config flow steps
* Handle probing failure raising an exception
* Implement review suggestions
* Address review comments
---------
Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
* Create ZHA entities before attempting to connect to the coordinator
* Delete the ZHA gateway object when unloading the config entry
* Only load ZHA groups if the coordinator device info is known offline
* Do not create a coordinator ZHA device until it is ready
* [WIP] begin fixing unit tests
* [WIP] Fix existing unit tests (one failure left)
* Fix remaining unit test
* Initial implementation of migration back to Zigbee firmware
* Fix typo in `BACKUP_RETRIES` constant name
* Name potentially long-running tasks
* Add an explicit timeout to `_async_wait_until_addon_state`
* Guard against the addon not being installed when uninstalling
* Do not launch the progress flow unless the addon is being installed
* Use a separate translation key for confirmation before disabling multi-PAN
* Disable the bellows UART thread within the ZHA config flow radio manager
* Enhance config flow progress keys for flasher addon installation
* Allow `zha.async_unload_entry` to succeed when ZHA is not loaded
* Do not endlessly spawn task when uninstalling addon synchronously
* Include `uninstall_addon.data.*` in SkyConnect and Yellow translations
* Make `homeassistant_hardware` unit tests pass
* Fix SkyConnect unit test USB mock
* Fix unit tests in related integrations
* Use a separate constant for connection retrying
* Unit test ZHA migration from multi-PAN
* Test ZHA multi-PAN migration helper changes
* Fix flaky SkyConnect unit test being affected by system USB devices
* Unit test the synchronous addon uninstall helper
* Test failure when flasher addon is already running
* Test failure where flasher addon fails to install
* Test ZHA migration failures
* Rename `get_addon_manager` to `get_multiprotocol_addon_manager`
* Remove stray "addon uninstall" comment
* Use better variable names for the two addon managers
* Remove extraneous `self.install_task = None`
* Use the addon manager's `addon_name` instead of constants
* Migrate synchronous addon operations into a new class
* Remove wrapper functions with `finally` clause
* Use a more descriptive error message when the flasher addon is stalled
* Fix existing unit tests
* Remove `wait_until_done`
* Fully replace all addon name constants with those from managers
* Fix OTBR breakage
* Simplify `is_hassio` mocking
* Add missing tests for `check_multi_pan_addon`
* Add missing tests for `multi_pan_addon_using_device`
* Use `waiting` instead of `sync` in class name and methods
* Wrap attribute writes in a helper throwing `HomeAssistantError`
* Do not check for `Exception` instances, they are now propagated
* Write `cie_addr` synchronously
* Fix unnecessary `if` in `async_set_native_value`
* Fix unit tests
* Use `HomeAssistantError` in cover commands
* Revert writing `cie_addr` synchronously
* Disallow proxying of some cluster methods to fix unit test warnings
* Unit test cover failures to increase coverage
* Unit test missing climate device
* Unit test remaining cover commands
* Fix turn_on ignoring transition=0 and brightness=None, add test
This fixes light.turn_on for ZHA lights ignoring a transition of 0 when no brightness is given at the same time.
It also adds a test for that case.
Fixes https://github.com/home-assistant/core/issues/93265
* Add test for "force on" lights
This test checks that "force on" lights also get an "on" command (in addition to the "move to level" command) when turn_on is called with only transition=0.
* Fix "on" command sent for transition=0 calls, fix FORCE_ON missing for transition=0
This fixes an issue where the "on" command is sent in addition to a "move_to_level_with_on_off" command, even though the latter one is enough (for non-FORCE_ON lights).
It also fixes the test to not expect the unnecessary "on" command (in addition to the expected "move_to_level_with_on_off" command).
The `brightness != 0` change is needed to fix an issue where FORCE_ON lights did not get the required "on" command (in addition to "move_to_level_with_on_off") if turn_on was called with only transition=0.
(It could have been `brightness not None`, but that would also send an "on" command if turn_on is called with brightness=0 which HA somewhat "supports". The brightness != 0 check avoids that issue.)
* Improve comments in ZHA light class
* Allow matching custom quirks when self.quirk_classes might not contain the full class path but only the module and the class.
* Add test for matching custom quirk classes.
* Make `find_entity_id` synchronous
* Remove `tries`
* Use new `attribute_updated` event signature
* Validate attributes before creating entities
* Avoid swallowing exceptions when opening covers
* Bump ZHA dependencies
* Add a matcher for Sinope water leak sensors using a non-standard ZCL attribute
* Ensure handler matching is strict, not multi
* Add type annotations for newly-updated functions
Erik Montnemery
Ville Skyttä
puddly
Joakim Plate
Jan Bouwhuis
TheJulianJES
tronikos
Tomáš Bedřich
Paul Bottein
J. Nick Koston
Marc Mueller
Franck Nijhof
Guy Martin