* implement correct state for rflink cover
* Fix linting error
* invert logic as local testing pointed out it should be reversed
* add period at the end to satisfy the linter
* First draft
* Generate device id
* No obscure registry
* Dont store config_entry_id in device
* Storage
* Small mistake on rebase
* Do storage more like entity registry
* Improve device identification
* Add tests
* Remove deconz device support from PR
* Fix hound comments, voff!
* Fix comments and clean up
* Fix proper indentation
* Fix pydoc issues
* Fix mochad component to not use self.device
* Fix mochad light platform to not use self.device
* Fix TankUtilitySensor to not use self.device
* Fix Soundtouch to not use self.device
* Fix Plex to not use self.device
* Fix Emby to not use self.device
* Fix Heatmiser to not use self.device
* Fix Wemo lights to not use self.device
* Fix Lifx to not use self.device
* Fix Radiotherm to not use self.device
* Fix Juicenet to not use self.device
* Fix Qwikswitch to not use self.device
* Fix Xiaomi miio to not use self.device
* Fix Nest to not use self.device
* Fix Tellduslive to not use self.device
* Fix Knx to not use self.device
* Clean up a small mistake in soundtouch
* Fix comment from Ballob
* Fix bad indentation
* Fix indentatin
* Lint
* Remove unused variable
* Lint
* Add Tahoma io:VerticalExteriorAwningIOComponent and io:HorizontalAwningIOComponent
* Fix position of horizontal awning cover
* Add timestamps for lock time
* Adjust open-close actions for horizontal awning cover
* Fix stop action for io:RollerShutterGenericIOComponent
* Remove redundant information
* Use get for dict lookup
* Add Genie Aladdin Connect cover component
* Fix lines being too long
* Fix issues found in review
* remove Unknown state, use None instead
* Fixed requirements_all
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Gogogate2 - bump version
Uses latest version of library which ensures commands to device are idempotent
* Update requirements_all
* Expose sensor temperature
* update version
* import attribute
* Set temperature
* Remove temperature attribute
Removed temperature attribute until it can be re-implemented as a separate sensor.
* Update ordering
* Fix copy-&-paste issue
* add 2 devices
io:RollerShutterUnoIOComponent
io:ExteriorVenetianBlindIOComponent
* add 2 devices
* Update tahoma.py
* Fix hounci-bot violation
* Fixed Travis CI build failure
./homeassistant/components/cover/tahoma.py:83:13: E125 continuation line with same indent as next logical line
* Fixed Travis CI build failure
E125 continuation line with same indent as next logical line
* Fixed Travis CI build failure
E127 continuation line over-indented for visual indent
* Fix indent
* Change check
* Use 0/1 for GPIO writes rather than true/false
GPIO pins don't appear to respond to true/false writes, and this is reflected in code elsewhere. For example, in `\components\switch\rpio_gpio.py` the following code is used:
```
def turn_on(self, **kwargs):
"""Turn the device on."""
rpi_gpio.write_output(self._port, 0 if self._invert_logic else 1)
self._state = True
self.schedule_update_ha_state()
```
This code works. Hence this PR uses 0/1 in the raspberry pi GPIO cover, instead of true/false.
* Update rpi_gpio.py
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
Toon Willems
Tom Harris
Matt Schmitt
Robert Svensson
Paulus Schoutsen
Eduard van Valkenburg
Fabian Affolter
Paulus Schoutsen
Josh Shoemaker
fucm
huangyupeng
Ville Skyttä
pepeEL
cdce8p
Martin Hjelmare
William Scanlon
ArrayLabs
Otto Winter
guillaume1410
Aaron Bach
David Broadfoot
m4dmin
Thijs de Jong
Chris Jones
Tod Schmidt
Julius Mittenzwei
Scott Bradshaw