* Update requirements
Updated requirements
* Add attributes
Add firmware and config version attributes
* Small bump for aioharmony
Small version bump increase for aioharmony
* Fix requirements file
For some reason aioharmony ended up in there as a duplicate. Fixed it.
* Fix for send command with named device
* Update requirements to get reconnect fix
* Set aioharmony version to 0.1.4
Version 0.1.4 has additional small fixes.
* Keep trying to connect on startup
Keep trying to connect to the HUB on startup
* Revert rebase changes
Revert some changes that should have been reverted back as part of rebase.
* PlatformNotReady if unable to connect on startup
Will call PlatformNotReady if unable to connect to Hub on startup
* Increase aioharmony requirement to 0.1.5
Increase aioharmony requirement to 0.1.5
* Register callbacks when entity added to HASS
Register the callbacks only once the entity has been added to HASS instead of during setup of platform.
* Removed debug log in __init__
Removed debug log in __init__
* Update requirements
Updated requirements
* Add attributes
Add firmware and config version attributes
* Small bump for aioharmony
Small version bump increase for aioharmony
* Order ATTR constants
* Add the service
Add service change_channel
* Fix requirements file
For some reason aioharmony ended up in there as a duplicate. Fixed it.
* Updates based on review
* Use aioharmony for async
Use aioharmony to interact with Harmony hub. Due to this following improvements:
-) Setting of available state for entity
-) Automatic config update if configuration changes (including updating file containing config)
-) Allow using of device name instead of number
-) When sending command with repeat, nothing else will be able to put a IR command in between
* Requirements updated
* Version update for fix
* Mainly cleanup
* Update requirements
Updated requirements
* Fixed lint issue
* Small bump for aioharmony
Small version bump increase for aioharmony
* Updated based on review
* Updates to Harmony for web sockets
Updates to harmony to use web sockets with async
* Lint
* Small fixes
* Fix send_command
Continued improvements:
-) Fixed send_command
-) Get HUB configuration during update in case it was not retrieved earlier (i.e. HUB unavailable)
* Further improvements
Completely removed dependency on __main__ for pyharmony, instead everything is now done from the HarmonyClient class.
Writing out Harmony configuration file as a JSON file.
Using same functionality to determine if activity provided is an ID or name for device, allowing send_command to receive a device ID or device name.
* Point requirements to updated pyharmony repo
Updated REQUIREMENTS to point to repository containing the updates for pyharmony.
* lint
lint
* Small fix for device and activity ID
Small fix in checking if provided device or activity ID is valid.
* Pin package version
* No I/O in event loop
* Point at HA fork with correct version bump
* Fix req
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Clean up remote component
* Don't have device be required in send_command service and method.
* Don't have entity_id be required in the base service schema.
* Don't always add activity in the data dict for a service call.
* Update harmony remote platform according to new service schema.
* Remove not needed properties and attributes from the Kira remote
platform.
* Add send_command method to demo platform.
* Add tests and remove duplicate tests.
* Break out required argument as positional argument
* Use netdisco to automatically discover harmony hubs.
* Allow some settings in configuration.yml to override even on discovered hubs.
* Global is not required as no assignment on variable
* Use `set` instead of list for perf
* Store cache of discovered devices against `hass.data` rather than in global
* Handle case if the device cache is empty
* Fix indentation issue
* Added new commands and functionality to the harmony remote component.
-This includes the ability to optionally specify a number of times to repeat a specific command, such as pressing the volume button multiple times.
-Also added a new command that allows you to send multiple commands to the harmony at once, such as sending a set of channel numbers.
-Updated the unit tests for these changes.
* Fix flake8 coding violations
* Remove send_commands command and make send_command handle a single or list of commands
* Remove send_commands tests
* Update itach and kira remotes for new send_command structure. Fix pyharmony version in requirements_all.txt
* Fix incorrect variable name
* Fix a couple minor issues with remote tests
* Migrate remote to async
* add coro
* remove sync from init since only used in harmony
* import ATTR from remote
* remove unused sync stuff from tests
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* readded after rebase
* cleaning up style errors
* modified .coveragerc
* moved import statements
* added more debug logging
* Added URL encoding of token received from Logitech
* Corrected import for python 3
* new pyharmony version
* new pyharmony version
* remote tests
* only write config file if not present or sync service is called
* more tests
* more tests
* bumped pyharmony version to work with new auth
* bumped pyharmony version to work with new auth
* style corrections
* harmony local auth and remote demo platform
* style fix
* PR refinements and permission issues
* forgot a blank line
* removed sync test from test_init
* removed sync test from test_init
* visual indent
* send_command test in demo platform
ehendrix23
Paulus Schoutsen
cdce8p
Ville Skyttä
Anders Melchiorsen
Paulus Schoutsen
Otto Winter
Fabian Affolter
Martin Hjelmare
Alan Fischer
Jeff Wilson
Anthony Hughes
everix1992
Pascal Vizeli
iandday