* Update Avi-On to work with the API.
* Use voluptuous defaults instead of .get()
* Bump library version.
* Remove unnecessary voluptuous defaults. Fix manually-configured devices.
API-discovered devices are already Avion objects, but manually-configured devices need to be instantiated as Avion objects first.
* Use .get() where appropriate.
* Remove default
* 🌧 Meteo France rain forecast
* do not fail on wrong config
* Update name of sensor class
* do not show sensor if not working
* Update .coveragerc
* ability to submit insee location code without final 0 needed by meteo-france
* Lynting
* more lynting
* update comment
* block comment linting
* reducing length of long lines
* linting
* Update météo-france platform
Now work with pypi package and monitored conditions
* remove error log
* Update requirements_all.txt
* Increase scan interval to 5 minutes
* Update meteo_france according to review
* better error handling of location missing some monitored conditions
* fix lint error
* moving error log
Errors are now catched at sensor initialization and state is set when updating the data
* Update updating of sensor
* Fix linky sensor login error
* Make platform fail-safe
Adding following enhancements:
* Make sure the platform loads correctly by making the first API request in setup_platform.
* Close the session after each API call.
* Use timeout parameter everywhere.
* Fix Hound CI error: line too long.
* Update pylinky library
* Remove LinkyClient from update()
* Add OpenTherm Gateway sensor platform.
* Add OTGW_ variables to list of supported sensors.
* Order imports.
* Add OpenTherm Gateway binary sensor support.
* Revert "Add OpenTherm Gateway binary sensor support."
This reverts commit 115acaa912.
* Import COMP_SENSOR from sensor component rather than defining it.
* Update opentherm_gw sensor platform docs url.
* Update dependency to v0.2b1
Old version had incorrect variable names for some of the sensors
* Update requirements_all.txt
* Address review findings.
* Update .coveragerc
* Add LG soundbar support
We can autodiscover these, so for now let's skip any local configuration.
Currently we expose volume, source and equaliser preset - we can expose the
other volume controls and options as well if necessary, but I don't know
whether it's worth it.
* Add discovery of LG devices
This is a generic discovery type that doesn't obviously contain enough
information to identify whether we're talking to a speaker system or any
other kind of device - on the other hand I haven't been able to find any
other LG devices that respond like this, so we can cross that bridge when
we get to it.
* Lint
- Bump twilio requirement to latest 6.19.1 version
- The generic response type is gone in the latest
versions of the twilio package. It appears we were
generating an empty response just to get the empty
xml body. TwilML is the new base class all responses
inherit from. So I've switched the code over to using
and empty TwilML object instead.
- The exception type was moved to a different location.
* ID is added to cards without ID in ui-lovelace.yaml when loaded
* Hound
* Remove ui-lovelace.yaml
* Nicer get
* Update tests
* If YAML dump fails, config not gone
* Add tests
* Woof!
* Remove nosetests
* Address comments
* Woof...
* Delete test.yaml
* update rights to saved file
* fix
* line break
* Updgrae blinkpy to 0.10.0
- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number
* Update requirements
* add capability for manually specifying IP and port of Konnected device(s)
* add config options for blink and discovery settings
* import konnected only in functions where needed
* updates from code review feedback
* convert manual_discovery to async
* code review updates; use correct sync vs async
* First commit
* Feature complete?
* Add dependency
* Move setting poe mode logic to library
* Use guard clauses
* Bump requirement to 2
* Simplify saving switches with poe off
* Store and use poe mode
* Fix indentation
* Fix flake8
* Configuration future proofing
* Bump dependency to v3
* Add first test
* Proper use of defaults with config flow (thanks helto)
* Appease hound
* Make sure there can't be duplicate entries of combination host+site
* More tests
* More tests
* 98% coverage of controller
* Fix hound comments
* Config flow step init not necessary
* Use async_current_entries to check if host and site for controller is used
* Remove storing/restoring poe off devices to slim PR
* First batch of switch tests
* More switch tests.
* Small improvements and clean up
* Make tests pass
Don't name device in device registry
* Dont process clients that belong to non-UniFi POE switches
* Allow selection of site from a list in config flow
* Fix double blank lines in method
* Update codeowners
* new lib dependencies, working old xmpp
* non working aioxmpp
* reverting to sync xmpp
will try slixmpp instead of aioxmpp
reasons:
echo bot example of aioxmpp had blocking behavior (slixmpp echo bot works fine)
closer API to sleekxmpp
less dependencies than aioxmpp
* first working slixmpp version
* DEBUG messages, changed MUC call
the joinMUC method changed from sleekxmpp to slixmpp
added debug messages
better name for cleanup callback
* flake8
* little cleanup, tested MUC
* requirements_all
* dependencies managed by slixmpp, removed debug messages
* resource configurable by user, requirements updated
* changed __init__ parameter code format
* removed trailing dots from LOG messages
* changed super call to python3 format
* Provide an individual color temperature range per Yeelight model
* Fix lint
* Bump yeelight version
* Remove unused const
* Enable SUPPORT_COLOR_TEMP for BulbType.WhiteTemp
* SMHI Component
* Clean up typos
* Fixed default values first config to home location (tests will follow)
* Fixed tests and removed unused function
* Minor fixup after comments from @kane610
* add support for precipitation in forecast
* Removed old async_step_init not needed.
* Add support for monitoring the temperature of a thermoworks smoke thermometer.
* Use string formatting.
* Add line break.
* Add error handling for authentication.
* Fix linting errors.
* Fix quotes.
* Bump thermoworks_smoke library version.
* Review changes for @MartinHjelmare
* Add unique id attribute and change battery attribute to the standard "battery_level".
* requested changes to snake case and monitored conditions
* fix lint error
* exclude firmware from state attrs. rename original_unit to unit_of_min_max so it's more clear what it is for.
* add device_info
* add regex validator for exclude
* undo device info stuff
* remove serial number from attributes even though other components are allowed to have it...
* exclude firmware
* Add additional model name of the Xiaomi Aqara Button (WXKG11LM)
* Add additional model name of the Xiaomi Aqara Wireless Switch (WXKG02LM, WXKG03LM)
* Bump PyXiaomiGateway version
kennedyshead
Diogo Gomes
Paulus Schoutsen
Luc Touraille
Daniel Høyer Iversen
Anton Sarukhanov
Evan Bruhn
Victor Cerutti
Paulus Schoutsen
Steven Looman
Robert Svensson
Julius Mittenzwei
Fabian Affolter
Andrey Kupreychik
Rohan Kapoor
Tomas Hellström
cdce8p
jxwolstenholme
Anders Melchiorsen
Aaron Bach
Matt Snyder
Luke Fritz
Mathieu Velten
guillaume1410
Raymon de Looff
Julien Debaru
Nick Touran
Nick Horvath
mvn23
Kevin Fronczak
Matthew Garrett
Brian Gianforcaro
Eduard van Valkenburg
Bram Kragten
Nate Clark
Marcel Hoppe
Tsvi Mostovicz
Alexander Lyon
Daniel Perna
Craig J. Midwinter
Malte Franken
Brant Knudson
333ryan18
William Scanlon
J4nsen
Keiran S
Florian Klien
Tom Harris
Sebastian Muszynski
Mister Wil
George Marshall
Dav0815
Colby Rome
cgtobi
Markus Nigbur
marcolertora
Teemu R
Oliver
Glenn Waters